Pull x86 platform driver updates from Hans de Goede:
  "New drivers:
    - AMD Host System Management Port (HSMP)
    - Intel Software Defined Silicon

  Removed drivers (functionality folded into other drivers):
    - intel_cht_int33fe_microb
    - surface3_button

  amd-pmc:
    - s2idle bug-fixes
    - Support for AMD Spill to DRAM STB feature

  hp-wmi:
    - Fix SW_TABLET_MODE detection method (and other fixes)
    - Support omen thermal profile policy v1

  serial-multi-instantiate:
    - Add SPI device support
    - Add support for CS35L41 amplifiers used in new laptops

  think-lmi:
    - syfs-class-firmware-attributes Certificate authentication support

  thinkpad_acpi:
    - Fixes + quirks
    - Add platform_profile support on AMD based ThinkPads

  x86-android-tablets:
    - Improve Asus ME176C / TF103C support
    - Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets

  Lots of various other small fixes and hardware-id additions"

* tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits)
  platform/x86: think-lmi: Certificate authentication support
  Documentation: syfs-class-firmware-attributes: Lenovo Certificate support
  platform/x86: amd-pmc: Only report STB errors when STB enabled
  platform/x86: amd-pmc: Drop CPU QoS workaround
  platform/x86: amd-pmc: Output error codes in messages
  platform/x86: amd-pmc: Move to later in the suspend process
  ACPI / x86: Add support for LPS0 callback handler
  platform/x86: thinkpad_acpi: consistently check fan_get_status return.
  platform/x86: hp-wmi: support omen thermal profile policy v1
  platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated
  platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
  platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
  platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)
  platform/x86: amd-pmc: Validate entry into the deepest state on resume
  platform/x86: thinkpad_acpi: Don't use test_bit on an integer
  platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable
  platform/x86: thinkpad_acpi: clean up dytc profile convert
  platform/x86: x86-android-tablets: Depend on EFI and SPI
  platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init()
  platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes
  ...

Pull power management updates from Rafael Wysocki:
 "These are mostly fixes and cleanups all over the code and a new piece
  of documentation for Intel uncore frequency scaling.

  Functionality-wise, the intel_idle driver will support Sapphire Rapids
  Xeons natively now (with some extra facilities for controlling
  C-states more precisely on those systems), virtual guests will take
  the ACPI S4 hardware signature into account by default, the
  intel_pstate driver will take the defualt EPP value from the firmware,
  cpupower utility will support the AMD P-state driver added in the
  previous cycle, and there is a new tracer utility for that driver.

  Specifics:

   - Allow device_pm_check_callbacks() to be called from interrupt
     context without issues (Dmitry Baryshkov).

   - Modify devm_pm_runtime_enable() to automatically handle
     pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
     Anderson).

   - Make the schedutil cpufreq governor use to_gov_attr_set() instead
     of open coding it (Kevin Hao).

   - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
     cpufreq longhaul driver (Rafael Wysocki).

   - Unify show() and store() naming in cpufreq and make it use
     __ATTR_XX (Lianjie Zhang).

   - Make the intel_pstate driver use the EPP value set by the firmware
     by default (Srinivas Pandruvada).

   - Re-order the init checks in the powernow-k8 cpufreq driver (Mario
     Limonciello).

   - Make the ACPI processor idle driver check for architectural support
     for LPI to avoid using it on x86 by mistake (Mario Limonciello).

   - Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
     Bityutskiy).

   - Add 'preferred_cstates' module argument to the intel_idle driver to
     work around C1 and C1E handling issue on Sapphire Rapids (Artem
     Bityutskiy).

   - Add core C6 optimization on Sapphire Rapids to the intel_idle
     driver (Artem Bityutskiy).

   - Optimize the haltpoll cpuidle driver a bit (Li RongQing).

   - Remove leftover text from intel_idle() kerneldoc comment and fix up
     white space in intel_idle (Rafael Wysocki).

   - Fix load_image_and_restore() error path (Ye Bin).

   - Fix typos in comments in the system wakeup hadling code (Tom Rix).

   - Clean up non-kernel-doc comments in hibernation code (Jiapeng
     Chong).

   - Fix __setup handler error handling in system-wide suspend and
     hibernation core code (Randy Dunlap).

   - Add device name to suspend_report_result() (Youngjin Jang).

   - Make virtual guests honour ACPI S4 hardware signature by default
     (David Woodhouse).

   - Block power off of a parent PM domain unless child is in deepest
     state (Ulf Hansson).

   - Use dev_err_probe() to simplify error handling for generic PM
     domains (Ahmad Fatoum).

   - Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).

   - Document Intel uncore frequency scaling (Srinivas Pandruvada).

   - Add DTPM hierarchy description (Daniel Lezcano).

   - Change the locking scheme in DTPM (Daniel Lezcano).

   - Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
     release (Daniel Lezcano).

   - Make dtpm_node_callback[] static (kernel test robot).

   - Fix spelling mistake "initialze" -> "initialize" in
     dtpm_create_hierarchy() (Colin Ian King).

   - Add tracer tool for the amd-pstate driver (Jinzhou Su).

   - Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).

   - Add AMD P-State support to the cpupower utility (Huang Rui)"

* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
  cpufreq: powernow-k8: Re-order the init checks
  cpuidle: intel_idle: Drop redundant backslash at line end
  cpuidle: intel_idle: Update intel_idle() kerneldoc comment
  PM: hibernate: Honour ACPI hardware signature by default for virtual guests
  cpufreq: intel_pstate: Use firmware default EPP
  cpufreq: unify show() and store() naming and use __ATTR_XX
  PM: core: keep irq flags in device_pm_check_callbacks()
  cpuidle: haltpoll: Call cpuidle_poll_state_init() later
  Documentation: amd-pstate: add tracer tool introduction
  tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
  tools/power/x86/intel_pstate_tracer: make tracer as a module
  cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
  PM: sleep: Add device name to suspend_report_result()
  turbostat: fix PC6 displaying on some systems
  intel_idle: add core C6 optimization for SPR
  intel_idle: add 'preferred_cstates' module argument
  intel_idle: add SPR support
  PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
  ACPI: processor idle: Check for architectural support for LPI
  cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
  ...

Merge ACPI SoC drivers changes, ACPI backlight driver changes and APEI
changes for 5.18-rc1:

 - Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
   the exact type of the controller (Andy Shevchenko).

 - Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
   Sembach).

 - Fix return value of __setup handlers in the APEI code (Randy
   Dunlap).

 - Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
   Koskinen).

 - Limit printable size of BERT table data (Darren Hart).

 - Fix up HEST and GHES initialization (Shuai Xue).

* acpi-soc:
  ACPI: LPSS: Provide an SSP type to the driver
  ACPI: LPSS: Constify properties member in struct lpss_device_desc
  ACPI: platform: Constify properties parameter in acpi_create_platform_device()

* acpi-video:
  ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU

* acpi-apei:
  ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
  ACPI/APEI: Limit printable size of BERT table data
  ACPI: APEI: fix return value of __setup handlers
  ACPI: APEI: rename ghes_init() with an "acpi_" prefix
  ACPI: APEI: explicit init of HEST and GHES in apci_init()

Currenty the latest thing run during a suspend to idle attempt is
the LPS0 `prepare_late` callback and the earliest thing is the
`resume_early` callback.

There is a desire for the `amd-pmc` driver to suspend later in the
suspend process (ideally the very last thing), so create a callback
that it or any other driver can hook into to do this.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220317141445.6498-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

If the platform firmware indicates that it does not support CPPC by
clearing the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits in the
platform _OSC capabilities mask, avoid attempting to evaluate _CPC
which may fail in that case.

Because the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits are only
added to the supported platform capabilities mask on x86, when
X86_FEATURE_HWP is supported, allow _CPC to be evaluated regardless
in the other cases.

Link: https://lore.kernel.org/linux-acpi/CAJZ5v0i=ecAksq0TV+iLVObm-=fUfdqPABzzkgm9K6KxO1ZCcg@mail.gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

The ACPI specification says that OSPM should refuse to restore from
hibernate if the hardware signature changes, and should boot from
scratch. However, real BIOSes often vary the hardware signature in cases
where we *do* want to resume from hibernate, so Linux doesn't follow the
spec by default.

However, in a virtual environment there's no reason for the VMM to vary
the hardware signature *unless* it wants to trigger a clean reboot as
defined by the ACPI spec. So enable the check by default if a hypervisor
is detected.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Properties are not and should not be changed in the callee, hence constify
properties parameter in acpi_create_platform_device().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull CXL (Compute Express Link) updates from Dan Williams:
 "The highlight is initial support for CXL memory hotplug. The static
  NUMA node (ACPI SRAT Physical Address to Proximity Domain) information
  known to platform firmware is extended to support the potential
  performance-class / memory-target nodes dynamically created from
  available CXL memory device capacity.

  New unit test infrastructure is added for validating health
  information payloads.

  Fixes to module reload stress and stack usage from exposure in -next
  are included. A symbol rename and some other miscellaneous fixups are
  included as well.

  Summary:

   - Rework ACPI sub-table infrastructure to optionally be used outside
     of __init scenarios and use it for CEDT.CFMWS sub-table parsing.

   - Add support for extending num_possible_nodes by the potential
     hotplug CXL memory ranges

   - Extend tools/testing/cxl with mock memory device health information

   - Fix a module-reload workqueue race

   - Fix excessive stack-frame usage

   - Rename the driver context data structure from "cxl_mem" since that
     name collides with a proposed driver name

   - Use EXPORT_SYMBOL_NS_GPL instead of -DDEFAULT_SYMBOL_NAMESPACE at
     build time"

* tag 'cxl-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/core: Remove cxld_const_init in cxl_decoder_alloc()
  cxl/pmem: Fix module reload vs workqueue state
  ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT
  cxl/test: Mock acpi_table_parse_cedt()
  cxl/acpi: Convert CFMWS parsing to ACPI sub-table helpers
  ACPI: Add a context argument for table parsing handlers
  ACPI: Teach ACPI table parsing about the CEDT header format
  ACPI: Keep sub-table parsing infrastructure available for modules
  tools/testing/cxl: add mock output for the GET_HEALTH_INFO command
  cxl/memdev: Remove unused cxlmd field
  cxl/core: Convert to EXPORT_SYMBOL_NS_GPL
  cxl/memdev: Change cxl_mem to a more descriptive name
  cxl/mbox: Remove bad comment
  cxl/pmem: Fix reference counting for delayed work

Pull power management updates from Rafael Wysocki:
 "The most signigicant change here is the addition of a new cpufreq
  'P-state' driver for AMD processors as a better replacement for the
  venerable acpi-cpufreq driver.

  There are also other cpufreq updates (in the core, intel_pstate, ARM
  drivers), PM core updates (mostly related to adding new macros for
  declaring PM operations which should make the lives of driver
  developers somewhat easier), and a bunch of assorted fixes and
  cleanups.

  Summary:

   - Add new P-state driver for AMD processors (Huang Rui).

   - Fix initialization of min and max frequency QoS requests in the
     cpufreq core (Rafael Wysocki).

   - Fix EPP handling on Alder Lake in intel_pstate (Srinivas
     Pandruvada).

   - Make intel_pstate update cpuinfo.max_freq when notified of HWP
     capabilities changes and drop a redundant function call from that
     driver (Rafael Wysocki).

   - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
     Stephen Boyd, Vladimir Zapolskiy).

   - Fix double devm_remap() in the Mediatek cpufreq driver (Hector
     Yuan).

   - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
     Luba).

   - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).

   - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).

   - Fix two comments in cpuidle code (Jason Wang, Yang Li).

   - Allow model-specific normal EPB value to be used in the intel_epb
     sysfs attribute handling code (Srinivas Pandruvada).

   - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).

   - Add safety net to supplier device release in the runtime PM core
     code (Rafael Wysocki).

   - Capture device status before disabling runtime PM for it (Rafael
     Wysocki).

   - Add new macros for declaring PM operations to allow drivers to
     avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
     update some drivers to use these macros (Paul Cercueil).

   - Allow ACPI hardware signature to be honoured during restore from
     hibernation (David Woodhouse).

   - Update outdated operating performance points (OPP) documentation
     (Tang Yizhou).

   - Reduce log severity for informative message regarding frequency
     transition failures in devfreq (Tzung-Bi Shih).

   - Add DRAM frequency controller devfreq driver for Allwinner sunXi
     SoCs (Samuel Holland).

   - Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
     Bergmann).

   - Add support for new layout of Psys PowerLimit Register on SPR to
     the Intel RAPL power capping driver (Zhang Rui).

   - Fix typo in a comment in idle_inject.c (Jason Wang).

   - Remove unused function definition from the DTPM (Dynamit Thermal
     Power Management) power capping framework (Daniel Lezcano).

   - Reduce DTPM trace verbosity (Daniel Lezcano)"

* tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
  cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
  cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
  cpuidle: use default_groups in kobj_type
  x86: intel_epb: Allow model specific normal EPB value
  MAINTAINERS: Add AMD P-State driver maintainer entry
  Documentation: amd-pstate: Add AMD P-State driver introduction
  cpufreq: amd-pstate: Add AMD P-State performance attributes
  cpufreq: amd-pstate: Add AMD P-State frequencies attributes
  cpufreq: amd-pstate: Add boost mode support for AMD P-State
  cpufreq: amd-pstate: Add trace for AMD P-State module
  cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
  cpufreq: amd-pstate: Add fast switch function for AMD P-State
  cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
  ACPI: CPPC: Add CPPC enable register function
  ACPI: CPPC: Check present CPUs for determining _CPC is valid
  ACPI: CPPC: Implement support for SystemIO registers
  x86/msr: Add AMD CPPC MSR definitions
  x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
  cpufreq: use default_groups in kobj_type
  ...

PCC OpRegion provides a mechanism to communicate with the platform
directly from the AML. PCCT provides the list of PCC channel available
in the platform, a subset or all of them can be used in PCC Opregion.

This patch registers the PCC OpRegion handler before ACPI tables are
loaded. This relies on the special context data passed to identify and
set up the PCC channel before the OpRegion handler is executed for the
first time.

Typical PCC Opregion declaration looks like this:

OperationRegion (PFRM, PCC, 2, 0x74)
Field (PFRM, ByteAcc, NoLock, Preserve)
{
    SIGN,   32,
    FLGS,   32,
    LEN,    32,
    CMD,    32,
    DATA,   800
}

It contains four named double words followed by 100 bytes of buffer
names DATA.

ASL can fill out the buffer something like:

    /* Create global or local buffer */
    Name (BUFF, Buffer (0x0C){})
    /* Create double word fields over the buffer */
    CreateDWordField (BUFF, 0x0, WD0)
    CreateDWordField (BUFF, 0x04, WD1)
    CreateDWordField (BUFF, 0x08, WD2)

    /* Fill the named fields */
    WD0 = 0x50434300
    SIGN = BUFF
    WD0 = 1
    FLGS = BUFF
    WD0 = 0x10
    LEN = BUFF

    /* Fill the payload in the DATA buffer */
    WD0 = 0
    WD1 = 0x08
    WD2 = 0
    DATA = BUFF

    /* Write to CMD field to trigger handler */
    WD0 = 0x4404
    CMD = BUFF

This buffer is received by acpi_pcc_opregion_space_handler. This
handler will fetch the complete buffer via internal_pcc_buffer.

The setup handler will receive the special PCC context data which will
contain the PCC channel index which used to set up the channel. The
buffer pointer and length is saved in region context which is then used
in the handler.

(kernel test robot: Build failure with CONFIG_ACPI_DEBUGGER)
Link: https://lore.kernel.org/r/202201041539.feAV0l27-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>