Remove deadcode since CXL no longer calls hmat_update_target_coordinates().

Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250829222907.1290912-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>

Pull arm64 updates from Catalin Marinas:
 "A quick summary: perf support for Branch Record Buffer Extensions
  (BRBE), typical PMU hardware updates, small additions to MTE for
  store-only tag checking and exposing non-address bits to signal
  handlers, HAVE_LIVEPATCH enabled on arm64, VMAP_STACK forced on.

  There is also a TLBI optimisation on hardware that does not require
  break-before-make when changing the user PTEs between contiguous and
  non-contiguous.

  More details:

  Perf and PMU updates:

   - Add support for new (v3) Hisilicon SLLC and DDRC PMUs

   - Add support for Arm-NI PMU integrations that share interrupts
     between clock domains within a given instance

   - Allow SPE to be configured with a lower sample period than the
     minimum recommendation advertised by PMSIDR_EL1.Interval

   - Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)

   - Adjust the perf watchdog period according to cpu frequency changes

   - Minor driver fixes and cleanups

  Hardware features:

   - Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)

   - Support for reporting the non-address bits during a synchronous MTE
     tag check fault (FEAT_MTE_TAGGED_FAR)

   - Optimise the TLBI when folding/unfolding contiguous PTEs on
     hardware with FEAT_BBM (break-before-make) level 2 and no TLB
     conflict aborts

  Software features:

   - Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
     and using the text-poke API for late module relocations

   - Force VMAP_STACK always on and change arm64_efi_rt_init() to use
     arch_alloc_vmap_stack() in order to avoid KASAN false positives

  ACPI:

   - Improve SPCR handling and messaging on systems lacking an SPCR
     table

  Debug:

   - Simplify the debug exception entry path

   - Drop redundant DBG_MDSCR_* macros

  Kselftests:

   - Cleanups and improvements for SME, SVE and FPSIMD tests

  Miscellaneous:

   - Optimise loop to reduce redundant operations in contpte_ptep_get()

   - Remove ISB when resetting POR_EL0 during signal handling

   - Mark the kernel as tainted on SEA and SError panic

   - Remove redundant gcs_free() call"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
  arm64/gcs: task_gcs_el0_enable() should use passed task
  arm64: Kconfig: Keep selects somewhat alphabetically ordered
  arm64: signal: Remove ISB when resetting POR_EL0
  kselftest/arm64: Handle attempts to disable SM on SME only systems
  kselftest/arm64: Fix SVE write data generation for SME only systems
  kselftest/arm64: Test SME on SME only systems in fp-ptrace
  kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
  kselftest/arm64: Allow sve-ptrace to run on SME only systems
  arm64/mm: Drop redundant addr increment in set_huge_pte_at()
  kselftest/arm4: Provide local defines for AT_HWCAP3
  arm64: Mark kernel as tainted on SAE and SError panic
  arm64/gcs: Don't call gcs_free() when releasing task_struct
  drivers/perf: hisi: Support PMUs with no interrupt
  drivers/perf: hisi: Relax the event number check of v2 PMUs
  drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
  drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
  drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
  drivers/perf: hisi: Simplify the probe process for each DDRC version
  perf/arm-ni: Support sharing IRQs within an NI instance
  perf/arm-ni: Consolidate CPU affinity handling
  ...

GCC appears to have kind of fragile inlining heuristics, in the
sense that it can change whether or not it inlines something based on
optimizations. It looks like the kcov instrumentation being added (or in
this case, removed) from a function changes the optimization results,
and some functions marked "inline" are _not_ inlined. In that case,
we end up with __init code calling a function not marked __init, and we
get the build warnings I'm trying to eliminate in the coming patch that
adds __no_sanitize_coverage to __init functions:

WARNING: modpost: vmlinux: section mismatch in reference: xbc_exit+0x8 (section: .text.unlikely) -> _xbc_exit (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: real_mode_size_needed+0x15 (section: .text.unlikely) -> real_mode_blob_end (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: __set_percpu_decrypted+0x16 (section: .text.unlikely) -> early_set_memory_decrypted (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: memblock_alloc_from+0x26 (section: .text.unlikely) -> memblock_alloc_try_nid (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: acpi_arch_set_root_pointer+0xc (section: .text.unlikely) -> x86_init (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: acpi_arch_get_root_pointer+0x8 (section: .text.unlikely) -> x86_init (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: efi_config_table_is_usable+0x16 (section: .text.unlikely) -> xen_efi_config_table_is_usable (section: .init.text)

This problem is somewhat fragile (though using either __always_inline
or __init will deterministically solve it), but we've tripped over
this before with GCC and the solution has usually been to just use
__always_inline and move on.

For x86 this means forcing several functions to be inline with
__always_inline.

Link: https://lore.kernel.org/r/20250724055029.3623499-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>

If CONFIG_ACPI_SPCR_TABLE is disabled, acpi_parse_spcr()
currently returns 0, which may incorrectly suggest that
SPCR parsing was successful. This patch changes the behavior
to return -ENODEV to clearly indicate that SPCR support
is not available.

This prepares the codebase for future changes that depend
on acpi_parse_spcr() failure detection, such as suppressing
misleading console messages.

Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20250620131309.126555-2-me@linux.beauty
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull hyperv updates from Wei Liu:

 - Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel)

 - Fixes for Hyper-V UIO driver (Long Li)

 - Fixes for Hyper-V PCI driver (Michael Kelley)

 - Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley)

 - Documentation updates for Hyper-V VMBus (Michael Kelley)

 - Enhance logging for hv_kvp_daemon (Shradha Gupta)

* tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits)
  Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests
  Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir
  Documentation: hyperv: Update VMBus doc with new features and info
  PCI: hv: Remove unnecessary flex array in struct pci_packet
  Drivers: hv: Remove hv_alloc/free_* helpers
  Drivers: hv: Use kzalloc for panic page allocation
  uio_hv_generic: Align ring size to system page
  uio_hv_generic: Use correct size for interrupt and monitor pages
  Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary
  arch/x86: Provide the CPU number in the wakeup AP callback
  x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap()
  PCI: hv: Get vPCI MSI IRQ domain from DeviceTree
  ACPI: irq: Introduce acpi_get_gsi_dispatcher()
  Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device()
  Drivers: hv: vmbus: Get the IRQ number from DeviceTree
  dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties
  arm64, x86: hyperv: Report the VTL the system boots in
  arm64: hyperv: Initialize the Virtual Trust Level field
  Drivers: hv: Provide arch-neutral implementation of get_vtl()
  Drivers: hv: Enable VTL mode for arm64
  ...

Merge an ACPI resources management update, ACPI power management
updates, an ACPI platform profile driver fix and an ACPI documentation
update related to device properties for 6.16-rc1:

 - Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong
   Bai).

 - Add an LPS0 check() callback to the AMD pinctrl driver and fix up
   config symbol dependencies in it (Mario Limonciello, Rafael Wysocki).

 - Avoid initializing the ACPI platform profile driver on non-ACPI
   platforms (Alexandre Ghiti).

 - Document that references to ACPI data (non-device) nodes should use
   string-only references in hierarchical data node packages (Sakari
   Ailus).

* acpi-resource:
  ACPI: resource: fix a typo for MECHREVO in irq1_edge_low_force_override[]

* acpi-pm:
  pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset
  pinctrl: amd: Fix use of undeclared identifier 'pinctrl_amd_s2idle_dev_ops'
  pinctrl: amd: Add an LPS0 check() callback
  ACPI: Add missing prototype for non CONFIG_SUSPEND/CONFIG_X86 case

* acpi-platform-profile:
  ACPI: platform_profile: Avoid initializing on non-ACPI platforms

* acpi-docs:
  Documentation: ACPI: Use all-string data node references

Per the spec, the default max memory region must be 1 covering
all system memory.

When platform does not provide ACPI MRRM table or
when CONFIG_ACPI is opted out, the acpi_mrrm_max_mem_region() function
defaults to  returning 1 region complying to RDT spec.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250523172001.1761634-1-anil.s.keshavamurthy@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Using acpi_irq_create_hierarchy() in the cases where the code
also handles OF leads to code duplication as the ACPI subsystem
doesn't provide means to compute the IRQ domain parent whereas
the OF does.

Introduce acpi_get_gsi_dispatcher() so that the drivers relying
on both ACPI and OF may use irq_domain_create_hierarchy() in the
common code paths.

No functional changes.

Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250428210742.435282-11-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-11-romank@linux.microsoft.com>

The resctrl file system code needs to know how many region tags
are supported. Parse the ACPI MRRM table and save the max_mem_region
value.

Provide a function for resctrl to collect that value.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250505173819.419271-2-tony.luck@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

acpi_register_lps0_dev() and acpi_unregister_lps0_dev() may be used
in drivers that don't require CONFIG_SUSPEND or compile on !X86.

Add prototypes for those cases.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502191627.fRgoBwcZ-lkp@intel.com/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250407183656.1503446-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>