linux.git/include/linux/clk, branch v3.9.8

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-02-21T23:27:22+00:00

Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...

ARM: tegra: remove legacy clock code

2013-01-28T18:19:33+00:00

Remove all legacy clock code from mach-tegra.

Signed-off-by: Prashant Gaikwad 
Signed-off-by: Stephen Warren

ARM: tegra: migrate to new clock code

2013-01-28T18:19:07+00:00

Migrate Tegra clock support to drivers/clk/tegra, this involves
moving:
1. definition of tegra_cpu_car_ops to clk.c
2. definition of reset functions to clk-peripheral.c
3. change parent of cpu clock.
4. Remove legacy clock initialization.
5. Initialize clocks using DT.
6. Remove all instance of mach/clk.h

Signed-off-by: Prashant Gaikwad 
[swarren: use to_clk_periph_gate().]
Signed-off-by: Stephen Warren

ARM: tegra: move tegra_cpu_car.h to linux/clk/tegra.h

2013-01-28T18:19:06+00:00

tegra_cpu_car_ops struct is going to be accessed from drivers/clk/tegra.
Move the tegra_cpu_car_ops to include/linux/clk/tegra.h.

Signed-off-by: Prashant Gaikwad 
Signed-off-by: Stephen Warren

clk: sunxi: Use common of_clk_init() function

2013-01-24T19:12:23+00:00

Use common of_clk_init() function to initialize clocks.

Signed-off-by: Prashant Gaikwad 
Acked-by: Maxime Ripard 
Signed-off-by: Mike Turquette

Merge tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-12-14T22:54:26+00:00

Pull ARM SoC updates for Marvell mvebu/kirkwood from Olof Johansson:
 "This is a branch with updates for Marvell's mvebu/kirkwood platforms.
  They came in late-ish, and were heavily interdependent such that it
  didn't make sense to split them up across the cross-platform topic
  branches.  So here they are (for the second release in a row) in a
  branch on their own."

* tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (88 commits)
  arm: l2x0: add aurora related properties to OF binding
  arm: mvebu: add Aurora L2 Cache Controller to the DT
  arm: mvebu: add L2 cache support
  dma: mv_xor: fix error handling path
  dma: mv_xor: fix error checking of irq_of_parse_and_map()
  dma: mv_xor: use request_irq() instead of devm_request_irq()
  dma: mv_xor: clear the window override control registers
  arm: mvebu: fix address decoding armada_cfg_base() function
  ARM: mvebu: update defconfig with I2C and RTC support
  ARM: mvebu: Add SATA support for OpenBlocks AX3-4
  ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C on OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C controllers in Armada 370/XP
  arm: mvebu: Add hardware I/O Coherency support
  arm: plat-orion: Add coherency attribute when setup mbus target
  arm: dma mapping: Export a dma ops function arm_dma_set_mask
  arm: mvebu: Add SMP support for Armada XP
  arm: mm: Add support for PJ4B cpu and init routines
  arm: mvebu: Add IPI support via doorbells
  arm: mvebu: Add initial support for power managmement service unit
  ...

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-12-13T18:39:26+00:00

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...

clk: mvebu: add mvebu core clocks.

2012-11-20T13:34:08+00:00

This driver allows to provide DT clocks for core clocks found on
Marvell Kirkwood, Dove & 370/XP SoCs. The core clock frequencies and
ratios are determined by decoding the Sample-At-Reset registers.

Although technically correct, using a divider of 0 will lead to
div_by_zero panic. Let's use a ratio of 0/1 instead to fail later
with a zero clock.

Signed-off-by: Gregory CLEMENT 
Signed-off-by: Sebastian Hesselbarth 
Signed-off-by: Andrew Lunn 
Tested-by Gregory CLEMENT

clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs

2012-11-16T20:46:39+00:00

Signed-off-by: Maxime Ripard 
Cc: Mike Turquette

clk: Add support for fundamental zynq clks

2012-11-14T15:07:55+00:00

Provide simplified models for the necessary clocks on the zynq-7000
platform.  Currently, the PLLs, the CPU clock network, and the basic
peripheral clock networks (for SDIO, SMC, SPI, QSPI, UART) are modelled.

OF bindings are also provided and documented.

Signed-off-by: Josh Cartwright 
Signed-off-by: Soren Brinkmann 
Acked-by: Mike Turquette 
Acked-by: Michal Simek