linux.git/include/linux/cpu.h, branch v4.18.8

cpu/hotplug: Fix SMT supported evaluation

2018-08-15T15:37:33+00:00

commit bc2d8d262cba5736332cbc866acb11b1c5748aa9 upstream.

Josh reported that the late SMT evaluation in cpu_smt_state_init() sets
cpu_smt_control to CPU_SMT_NOT_SUPPORTED in case that 'nosmt' was supplied
on the kernel command line as it cannot differentiate between SMT disabled
by BIOS and SMT soft disable via 'nosmt'. That wreckages the state and
makes the sysfs interface unusable.

Rework this so that during bringup of the non boot CPUs the availability of
SMT is determined in cpu_smt_allowed(). If a newly booted CPU is not a
'primary' thread then set the local cpu_smt_available marker and evaluate
this explicitely right after the initial SMP bringup has finished.

SMT evaulation on x86 is a trainwreck as the firmware has all the
information _before_ booting the kernel, but there is no interface to query
it.

Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS")
Reported-by: Josh Poimboeuf 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Set CPU_SMT_NOT_SUPPORTED early

2018-08-15T15:37:30+00:00

commit fee0aede6f4739c87179eca76136f83210953b86 upstream.

The CPU_SMT_NOT_SUPPORTED state is set (if the processor does not support
SMT) when the sysfs SMT control file is initialized.

That was fine so far as this was only required to make the output of the
control file correct and to prevent writes in that case.

With the upcoming l1tf command line parameter, this needs to be set up
before the L1TF mitigation selection and command line parsing happens.

Signed-off-by: Thomas Gleixner 
Tested-by: Jiri Kosina 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Josh Poimboeuf 
Link: https://lkml.kernel.org/r/20180713142323.121795971@linutronix.de
Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Expose SMT control init function

2018-08-15T15:37:30+00:00

commit 8e1b706b6e819bed215c0db16345568864660393 upstream.

The L1TF mitigation will gain a commend line parameter which allows to set
a combination of hypervisor mitigation and SMT control.

Expose cpu_smt_disable() so the command line parser can tweak SMT settings.

[ tglx: Split out of larger patch and made it preserve an already existing
  	force off state ]

Signed-off-by: Jiri Kosina 
Signed-off-by: Thomas Gleixner 
Tested-by: Jiri Kosina 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Josh Poimboeuf 
Link: https://lkml.kernel.org/r/20180713142323.039715135@linutronix.de
Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Provide knobs to control SMT

2018-08-15T15:37:26+00:00

commit 05736e4ac13c08a4a9b1ef2de26dd31a32cbee57 upstream.

Provide a command line and a sysfs knob to control SMT.

The command line options are:

 'nosmt':	Enumerate secondary threads, but do not online them

 'nosmt=force': Ignore secondary threads completely during enumeration
 		via MP table and ACPI/MADT.

The sysfs control file has the following states (read/write):

 'on':		 SMT is enabled. Secondary threads can be freely onlined
 'off':		 SMT is disabled. Secondary threads, even if enumerated
 		 cannot be onlined
 'forceoff':	 SMT is permanentely disabled. Writes to the control
 		 file are rejected.
 'notsupported': SMT is not supported by the CPU

The command line option 'nosmt' sets the sysfs control to 'off'. This
can be changed to 'on' to reenable SMT during runtime.

The command line option 'nosmt=force' sets the sysfs control to
'forceoff'. This cannot be changed during runtime.

When SMT is 'on' and the control file is changed to 'off' then all online
secondary threads are offlined and attempts to online a secondary thread
later on are rejected.

When SMT is 'off' and the control file is changed to 'on' then secondary
threads can be onlined again. The 'off' -> 'on' transition does not
automatically online the secondary threads.

When the control file is set to 'forceoff', the behaviour is the same as
setting it to 'off', but the operation is irreversible and later writes to
the control file are rejected.

When the control status is 'notsupported' then writes to the control file
are rejected.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Konrad Rzeszutek Wilk 
Acked-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

x86/speculation/l1tf: Add sysfs reporting for l1tf

2018-08-15T15:37:25+00:00

commit 17dbca119312b4e8173d4e25ff64262119fcef38 upstream.

L1TF core kernel workarounds are cheap and normally always enabled, However
they still should be reported in sysfs if the system is vulnerable or
mitigated. Add the necessary CPU feature/bug bits.

- Extend the existing checks for Meltdowns to determine if the system is
  vulnerable. All CPUs which are not vulnerable to Meltdown are also not
  vulnerable to L1TF

- Check for 32bit non PAE and emit a warning as there is no practical way
  for mitigation due to the limited physical address bits

- If the system has more than MAX_PA/2 physical memory the invert page
  workarounds don't protect the system against the L1TF attack anymore,
  because an inverted physical address will also point to valid
  memory. Print a warning in this case and report that the system is
  vulnerable.

Add a function which returns the PFN limit for the L1TF mitigation, which
will be used in follow up patches for sanity and range checks.

[ tglx: Renamed the CPU feature bit to L1TF_PTEINV ]

Signed-off-by: Andi Kleen 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Josh Poimboeuf 
Acked-by: Dave Hansen 
Signed-off-by: Greg Kroah-Hartman

init: rename and re-order boot_cpu_state_init()

2018-08-12T19:19:42+00:00

This is purely a preparatory patch for upcoming changes during the 4.19
merge window.

We have a function called "boot_cpu_state_init()" that isn't really
about the bootup cpu state: that is done much earlier by the similarly
named "boot_cpu_init()" (note lack of "state" in name).

This function initializes some hotplug CPU state, and needs to run after
the percpu data has been properly initialized.  It even has a comment to
that effect.

Except it _doesn't_ actually run after the percpu data has been properly
initialized.  On x86 it happens to do that, but on at least arm and
arm64, the percpu base pointers are initialized by the arch-specific
'smp_prepare_boot_cpu()' hook, which ran _after_ boot_cpu_state_init().

This had some unexpected results, and in particular we have a patch
pending for the merge window that did the obvious cleanup of using
'this_cpu_write()' in the cpu hotplug init code:

  -       per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE;
  +       this_cpu_write(cpuhp_state.state, CPUHP_ONLINE);

which is obviously the right thing to do.  Except because of the
ordering issue, it actually failed miserably and unexpectedly on arm64.

So this just fixes the ordering, and changes the name of the function to
be 'boot_cpu_hotplug_init()' to make it obvious that it's about cpu
hotplug state, because the core CPU state was supposed to have already
been done earlier.

Marked for stable, since the (not yet merged) patch that will show this
problem is marked for stable.

Reported-by: Vlastimil Babka 
Reported-by: Mian Yousaf Kaukab 
Suggested-by: Catalin Marinas 
Acked-by: Thomas Gleixner 
Cc: Will Deacon 
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds

x86/bugs: Expose /sys/../spec_store_bypass

2018-05-03T11:55:47+00:00

Add the sysfs file for the new vulerability. It does not do much except
show the words 'Vulnerable' for recent x86 cores.

Intel cores prior to family 6 are known not to be vulnerable, and so are
some Atoms and some Xeon Phi.

It assumes that older Cyrix, Centaur, etc. cores are immune.

Signed-off-by: Konrad Rzeszutek Wilk 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Borislav Petkov 
Reviewed-by: Ingo Molnar

Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-01-14T17:51:25+00:00

Pull x86 pti updates from Thomas Gleixner:
 "This contains:

   - a PTI bugfix to avoid setting reserved CR3 bits when PCID is
     disabled. This seems to cause issues on a virtual machine at least
     and is incorrect according to the AMD manual.

   - a PTI bugfix which disables the perf BTS facility if PTI is
     enabled. The BTS AUX buffer is not globally visible and causes the
     CPU to fault when the mapping disappears on switching CR3 to user
     space. A full fix which restores BTS on PTI is non trivial and will
     be worked on.

   - PTI bugfixes for EFI and trusted boot which make sure that the user
     space visible page table entries have the NX bit cleared

   - removal of dead code in the PTI pagetable setup functions

   - add PTI documentation

   - add a selftest for vsyscall to verify that the kernel actually
     implements what it advertises.

   - a sysfs interface to expose vulnerability and mitigation
     information so there is a coherent way for users to retrieve the
     status.

   - the initial spectre_v2 mitigations, aka retpoline:

      + The necessary ASM thunk and compiler support

      + The ASM variants of retpoline and the conversion of affected ASM
        code

      + Make LFENCE serializing on AMD so it can be used as speculation
        trap

      + The RSB fill after vmexit

   - initial objtool support for retpoline

  As I said in the status mail this is the most of the set of patches
  which should go into 4.15 except two straight forward patches still on
  hold:

   - the retpoline add on of LFENCE which waits for ACKs

   - the RSB fill after context switch

  Both should be ready to go early next week and with that we'll have
  covered the major holes of spectre_v2 and go back to normality"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  x86,perf: Disable intel_bts when PTI
  security/Kconfig: Correct the Documentation reference for PTI
  x86/pti: Fix !PCID and sanitize defines
  selftests/x86: Add test_vsyscall
  x86/retpoline: Fill return stack buffer on vmexit
  x86/retpoline/irq32: Convert assembler indirect jumps
  x86/retpoline/checksum32: Convert assembler indirect jumps
  x86/retpoline/xen: Convert Xen hypercall indirect jumps
  x86/retpoline/hyperv: Convert assembler indirect jumps
  x86/retpoline/ftrace: Convert ftrace assembler indirect jumps
  x86/retpoline/entry: Convert entry assembler indirect jumps
  x86/retpoline/crypto: Convert crypto assembler indirect jumps
  x86/spectre: Add boot time option to select Spectre v2 mitigation
  x86/retpoline: Add initial retpoline support
  objtool: Allow alternatives to be ignored
  objtool: Detect jumps to retpoline thunks
  x86/pti: Make unpoison of pgd for trusted boot work for real
  x86/alternatives: Fix optimize_nops() checking
  sysfs/cpu: Fix typos in vulnerability documentation
  x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC
  ...

sysfs/cpu: Add vulnerability folder

2018-01-08T10:10:33+00:00

As the meltdown/spectre problem affects several CPU architectures, it makes
sense to have common way to express whether a system is affected by a
particular vulnerability or not. If affected the way to express the
mitigation should be common as well.

Create /sys/devices/system/cpu/vulnerabilities folder and files for
meltdown, spectre_v1 and spectre_v2.

Allow architectures to override the show function.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Konrad Rzeszutek Wilk 
Cc: Peter Zijlstra 
Cc: Will Deacon 
Cc: Dave Hansen 
Cc: Linus Torvalds 
Cc: Borislav Petkov 
Cc: David Woodhouse 
Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de

Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-11-14T02:23:19+00:00

Pull smp/hotplug updates from Thomas Gleixner:
 "No functional changes, just removal of obsolete and outdated defines,
  macros and documentation"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Get rid of CPU hotplug notifier leftovers
  cpu/hotplug: Remove obsolete notifier macros