linux.git/include/linux, branch v3.12.50

Revert "USB: Add device quirk for ASUS T100 Base Station keyboard"

2015-10-28T15:38:37+00:00

This reverts commit e25ecd21ffdbf1f8287103ccf97205fc30088344 in 3.12,
upstream commit ddbe1fca0bcb87ca8c199ea873a456ca8a948567 (USB: Add
device quirk for ASUS T100 Base Station keyboard).

It was applied twice to 3.12 and one backport is bogus.

Cc: Lu Baolu 
Cc: Alan Stern 
Cc: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

usb: core: implement AMD remote wakeup quirk

2015-10-28T15:38:35+00:00

commit 7868943db1668fba898cf71bed1506c19d6958aa upstream.

The following patch is required to resolve remote wake issues with
certain devices.

Issue description:
If the remote wake is issued from the device in a specific timing
condition while the system is entering sleep state then it may cause
system to auto wake on subsequent sleep cycle.

Root cause:
Host controller rebroadcasts the Resume signal > 100 µseconds after
receiving the original resume event from the device. For proper
function, some devices may require the rebroadcast of resume event
within the USB spec of 100µS.

Workaroud:
1. Filter the AMD platforms with Yangtze chipset, then judge of all the usb
devices are mouse or not. And get out the port id which attached a mouse
with Pixart controller.
2. Then reset the port which attached issue device during system resume
from S3.

[Q] Why the special devices are only mice? Would high speed devices
such as 3G modem or USB Bluetooth adapter trigger this issue?
- Current this sensitivity is only confined to devices that use Pixart
  controllers. This controller is designed for use with LS mouse
devices only. We have not observed any other devices failing. There
may be a small risk for other devices also but this patch (reset
device in resume phase) will cover the cases if required.

[Q] Shouldn’t the resume signal be sent within 100 us for every
device?
- The Host controller may not send the resume signal within 100us,
  this our host controller specification change. This is why we
require the patch to prevent side effects on certain known devices.

[Q] Why would clicking mouse INTENSELY to wake the system up trigger
this issue?
- This behavior is specific to the devices that use Pixart controller.
  It is timing dependent on when the resume event is triggered during
the sleep state.

[Q] Is it a host controller issue or mouse?
- It is the host controller behavior during resume that triggers the
  device incorrect behavior on the next resume.

This patch sets USB_QUIRK_RESET_RESUME flag for these Pixart-based mice
when they attached to platforms with AMD Yangtze chipset.

Signed-off-by: Huang Rui 
Suggested-by: Alan Stern 
Acked-by: Alan Stern 
Acked-by: Sarah Sharp 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

skbuff: Fix skb checksum partial check.

2015-10-28T15:38:14+00:00

[ Upstream commit 31b33dfb0a144469dd805514c9e63f4993729a48 ]

Earlier patch 6ae459bda tried to detect void ckecksum partial
skb by comparing pull length to checksum offset. But it does
not work for all cases since checksum-offset depends on
updates to skb->data.

Following patch fixes it by validating checksum start offset
after skb-data pointer is updated. Negative value of checksum
offset start means there is no need to checksum.

Fixes: 6ae459bda ("skbuff: Fix skb checksum flag on skb pull")
Reported-by: Andrew Vagin 
Signed-off-by: Pravin B Shelar 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

skbuff: Fix skb checksum flag on skb pull

2015-10-28T15:38:13+00:00

[ Upstream commit 6ae459bdaaeebc632b16e54dcbabb490c6931d61 ]

VXLAN device can receive skb with checksum partial. But the checksum
offset could be in outer header which is pulled on receive. This results
in negative checksum offset for the skb. Such skb can cause the assert
failure in skb_checksum_help(). Following patch fixes the bug by setting
checksum-none while pulling outer header.

Following is the kernel panic msg from old kernel hitting the bug.

------------[ cut here ]------------
kernel BUG at net/core/dev.c:1906!
RIP: 0010:[] skb_checksum_help+0x144/0x150
Call Trace:

[] queue_userspace_packet+0x408/0x470 [openvswitch]
[] ovs_dp_upcall+0x5d/0x60 [openvswitch]
[] ovs_dp_process_packet_with_key+0xe6/0x100 [openvswitch]
[] ovs_dp_process_received_packet+0x4b/0x80 [openvswitch]
[] ovs_vport_receive+0x2a/0x30 [openvswitch]
[] vxlan_rcv+0x53/0x60 [openvswitch]
[] vxlan_udp_encap_recv+0x8b/0xf0 [openvswitch]
[] udp_queue_rcv_skb+0x2dc/0x3b0
[] __udp4_lib_rcv+0x1cf/0x6c0
[] udp_rcv+0x1a/0x20
[] ip_local_deliver_finish+0xdd/0x280
[] ip_local_deliver+0x88/0x90
[] ip_rcv_finish+0x10d/0x370
[] ip_rcv+0x235/0x300
[] __netif_receive_skb+0x55d/0x620
[] netif_receive_skb+0x80/0x90
[] virtnet_poll+0x555/0x6f0
[] net_rx_action+0x134/0x290
[] __do_softirq+0xa8/0x210
[] call_softirq+0x1c/0x30
[] do_softirq+0x65/0xa0
[] irq_exit+0x8e/0xb0
[] do_IRQ+0x63/0xe0
[] common_interrupt+0x6e/0x6e

Reported-by: Anupam Chanda 
Signed-off-by: Pravin B Shelar 
Acked-by: Tom Herbert 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

security: fix typo in security_task_prctl

2015-10-28T15:38:02+00:00

commit b7f76ea2ef6739ee484a165ffbac98deb855d3d3 upstream.

Signed-off-by: Jann Horn 
Reviewed-by: Andy Lutomirski 
Signed-off-by: Linus Torvalds 
Signed-off-by: Jiri Slaby

net: add length argument to skb_copy_and_csum_datagram_iovec

2015-10-26T12:36:01+00:00

Without this length argument, we can read past the end of the iovec in
memcpy_toiovec because we have no way of knowing the total length of the
iovec's buffers.

This is needed for stable kernels where 89c22d8c3b27 ("net: Fix skb
csum races when peeking") has been backported but that don't have the
ioviter conversion, which is almost all the stable trees <= 3.18.

This also fixes a kernel crash for NFS servers when the client uses
 -onfsvers=3,proto=udp to mount the export.

Signed-off-by: Sabrina Dubroca 
Reviewed-by: Hannes Frederic Sowa 
Signed-off-by: Jiri Slaby

jbd2: avoid infinite loop when destroying aborted journal

2015-10-07T07:24:50+00:00

commit 841df7df196237ea63233f0f9eaa41db53afd70f upstream.

Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal
superblock fails" changed jbd2_cleanup_journal_tail() to return EIO
when the journal is aborted. That makes logic in
jbd2_log_do_checkpoint() bail out which is fine, except that
jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make
a progress in cleaning the journal. Without it jbd2_journal_destroy()
just loops in an infinite loop.

Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of
jbd2_log_do_checkpoint() fails with error.

Reported-by: Eryu Guan 
Tested-by: Eryu Guan 
Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a
Signed-off-by: Jan Kara 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Jiri Slaby

iio: Add inverse unit conversion macros

2015-09-30T08:59:50+00:00

commit c689a923c867eac40ed3826c1d9328edea8b6bc7 upstream.

Add inverse unit conversion macro to convert from standard IIO units to
units that might be used by some devices.

Those are useful in combination with scale factors that are specified as
IIO_VAL_FRACTIONAL. Typically the denominator for those specifications will
contain the maximum raw value the sensor will generate and the numerator
the value it maps to in a specific unit. Sometimes datasheets specify those
in different units than the standard IIO units (e.g. degree/s instead of
rad/s) and so we need to do a unit conversion.

From a mathematical point of view it does not make a difference whether we
apply the unit conversion to the numerator or the inverse unit conversion
to the denominator since (x / y) / z = x / (y * z). But as the denominator
is typically a larger value and we are rounding both the numerator and
denominator to integer values using the later method gives us a better
precision (E.g. the relative error is smaller if we round 8000.3 to 8000
rather than rounding 8.3 to 8).

This is where in inverse unit conversion macros will be used.

Marked for stable as used by some upcoming fixes.

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Jiri Slaby

PCI: Add dev_flags bit to access VPD through function 0

2015-09-18T07:26:29+00:00

commit 932c435caba8a2ce473a91753bad0173269ef334 upstream.

Add a dev_flags bit, PCI_DEV_FLAGS_VPD_REF_F0, to access VPD through
function 0 to provide VPD access on other functions.  This is for hardware
devices that provide copies of the same VPD capability registers in
multiple functions.  Because the kernel expects that each function has its
own registers, both the locking and the state tracking are affected by VPD
accesses to different functions.

On such devices for example, if a VPD write is performed on function 0,
*any* later attempt to read VPD from any other function of that device will
hang.  This has to do with how the kernel tracks the expected value of the
F bit per function.

Concurrent accesses to different functions of the same device can not only
hang but also corrupt both read and write VPD data.

When hangs occur, typically the error message:

  vpd r/w failed.  This is likely a firmware bug on this device.

will be seen.

Never set this bit on function 0 or there will be an infinite recursion.

Signed-off-by: Mark Rustad 
Signed-off-by: Bjorn Helgaas 
Acked-by: Alexander Duyck 
Signed-off-by: Jiri Slaby

rcu: Move lockless_dereference() out of rcupdate.h

2015-08-25T14:57:00+00:00

commit 0a04b0166929405cd833c1cc40f99e862b965ddc upstream.

I want to use lockless_dereference() from seqlock.h, which would mean
including rcupdate.h from it, however rcupdate.h already includes
seqlock.h.

Avoid this by moving lockless_dereference() into compiler.h. This is
somewhat tricky since it uses smp_read_barrier_depends() which isn't
available there, but its a CPP macro so we can get away with it.

The alternative would be moving it into asm/barrier.h, but that would
be updating each arch (I can do if people feel that is more
appropriate).

Cc: Paul McKenney 
Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Rusty Russell 
Signed-off-by: Jiri Slaby