linux.git/include/linux, branch v4.9.61

KEYS: Fix race between updating and finding a negative key

2017-10-27T08:38:11+00:00

commit 363b02dab09b3226f3bd1420dad9c72b79a42a76 upstream.

Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection
error into one field such that:

 (1) The instantiation state can be modified/read atomically.

 (2) The error can be accessed atomically with the state.

 (3) The error isn't stored unioned with the payload pointers.

This deals with the problem that the state is spread over three different
objects (two bits and a separate variable) and reading or updating them
atomically isn't practical, given that not only can uninstantiated keys
change into instantiated or rejected keys, but rejected keys can also turn
into instantiated keys - and someone accessing the key might not be using
any locking.

The main side effect of this problem is that what was held in the payload
may change, depending on the state.  For instance, you might observe the
key to be in the rejected state.  You then read the cached error, but if
the key semaphore wasn't locked, the key might've become instantiated
between the two reads - and you might now have something in hand that isn't
actually an error code.

The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error
code if the key is negatively instantiated.  The key_is_instantiated()
function is replaced with key_is_positive() to avoid confusion as negative
keys are also 'instantiated'.

Additionally, barriering is included:

 (1) Order payload-set before state-set during instantiation.

 (2) Order state-read before payload-read when using the key.

Further separate barriering is necessary if RCU is being used to access the
payload content after reading the payload pointers.

Fixes: 146aa8b1453b ("KEYS: Merge the type-specific data with the payload data")
Reported-by: Eric Biggers 
Signed-off-by: David Howells 
Reviewed-by: Eric Biggers 
Signed-off-by: Greg Kroah-Hartman

vmbus: fix missing signaling in hv_signal_on_read()

2017-10-27T08:38:08+00:00

[Fixes upstream in a much larger set of patches that are not worth backporting
to 4.9 - gregkh]

When the space available before start of reading (cached_write_sz)
is the same as the host required space (pending_sz), we need to
still signal host.

Fixes: 433e19cf33d3 ("Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read()")

Signed-off-by: John Starks 
Signed-off-by: Dexuan Cui 
Signed-off-by: Stephen Hemminger 
Signed-off-by: Greg Kroah-Hartman

bus: mbus: fix window size calculation for 4GB windows

2017-10-27T08:38:08+00:00

commit 2bbbd96357ce76cc45ec722c00f654aa7b189112 upstream.

At least the Armada XP SoC supports 4GB on a single DRAM window. Because
the size register values contain the actual size - 1, the MSB is set in
that case. For example, the SDRAM window's control register's value is
0xffffffe1 for 4GB (bits 31 to 24 contain the size).

The MBUS driver reads back each window's size from registers and
calculates the actual size as (control_reg | ~DDR_SIZE_MASK) + 1, which
overflows for 32 bit values, resulting in other miscalculations further
on (a bad RAM window for the CESA crypto engine calculated by
mvebu_mbus_setup_cpu_target_nooverlap() in my case).

This patch changes the type in 'struct mbus_dram_window' from u32 to
u64, which allows us to keep using the same register calculation code in
most MBUS-using drivers (which calculate ->size - 1 again).

Fixes: fddddb52a6c4 ("bus: introduce an Marvell EBU MBus driver")
Signed-off-by: Jan Luebbe 
Signed-off-by: Gregory CLEMENT 
Signed-off-by: Greg Kroah-Hartman

fs/mpage.c: fix mpage_writepage() for pages with buffers

2017-10-18T07:35:39+00:00

commit f892760aa66a2d657deaf59538fb69433036767c upstream.

When using FAT on a block device which supports rw_page, we can hit
BUG_ON(!PageLocked(page)) in try_to_free_buffers().  This is because we
call clean_buffers() after unlocking the page we've written.  Introduce
a new clean_page_buffers() which cleans all buffers associated with a
page and call it from within bdev_write_page().

[akpm@linux-foundation.org: s/PAGE_SIZE/~0U/ per Linus and Matthew]
Link: http://lkml.kernel.org/r/20171006211541.GA7409@bombadil.infradead.org
Signed-off-by: Matthew Wilcox 
Reported-by: Toshi Kani 
Reported-by: OGAWA Hirofumi 
Tested-by: Toshi Kani 
Acked-by: Johannes Thumshirn 
Cc: Ross Zwisler 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs

2017-10-12T09:51:25+00:00

commit 50e76632339d4655859523a39249dd95ee5e93e7 upstream.

Cpusets vs. suspend-resume is _completely_ broken. And it got noticed
because it now resulted in non-cpuset usage breaking too.

On suspend cpuset_cpu_inactive() doesn't call into
cpuset_update_active_cpus() because it doesn't want to move tasks about,
there is no need, all tasks are frozen and won't run again until after
we've resumed everything.

But this means that when we finally do call into
cpuset_update_active_cpus() after resuming the last frozen cpu in
cpuset_cpu_active(), the top_cpuset will not have any difference with
the cpu_active_mask and this it will not in fact do _anything_.

So the cpuset configuration will not be restored. This was largely
hidden because we would unconditionally create identity domains and
mobile users would not in fact use cpusets much. And servers what do use
cpusets tend to not suspend-resume much.

An addition problem is that we'd not in fact wait for the cpuset work to
finish before resuming the tasks, allowing spurious migrations outside
of the specified domains.

Fix the rebuild by introducing cpuset_force_rebuild() and fix the
ordering with cpuset_wait_for_hotplug().

Reported-by: Andy Lutomirski 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: 
Cc: Andy Lutomirski 
Cc: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Rafael J. Wysocki 
Cc: Tejun Heo 
Cc: Thomas Gleixner 
Fixes: deb7aa308ea2 ("cpuset: reorganize CPU / memory hotplug handling")
Link: http://lkml.kernel.org/r/20170907091338.orwxrqkbfkki3c24@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar 
Signed-off-by: Mike Galbraith 
Signed-off-by: Greg Kroah-Hartman

bpf: one perf event close won't free bpf program attached by another perf event

2017-10-12T09:51:21+00:00

[ Upstream commit ec9dd352d591f0c90402ec67a317c1ed4fb2e638 ]

This patch fixes a bug exhibited by the following scenario:
  1. fd1 = perf_event_open with attr.config = ID1
  2. attach bpf program prog1 to fd1
  3. fd2 = perf_event_open with attr.config = ID1
     
  4. user program closes fd2 and prog1 is detached from the tracepoint.
  5. user program with fd1 does not work properly as tracepoint
     no output any more.

The issue happens at step 4. Multiple perf_event_open can be called
successfully, but only one bpf prog pointer in the tp_event. In the
current logic, any fd release for the same tp_event will free
the tp_event->prog.

The fix is to free tp_event->prog only when the closing fd
corresponds to the one which registered the program.

Signed-off-by: Yonghong Song 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

mm, oom_reaper: skip mm structs with mmu notifiers

2017-10-12T09:51:19+00:00

commit 4d4bbd8526a8fbeb2c090ea360211fceff952383 upstream.

Andrea has noticed that the oom_reaper doesn't invalidate the range via
mmu notifiers (mmu_notifier_invalidate_range_start/end) and that can
corrupt the memory of the kvm guest for example.

tlb_flush_mmu_tlbonly already invokes mmu notifiers but that is not
sufficient as per Andrea:

 "mmu_notifier_invalidate_range cannot be used in replacement of
  mmu_notifier_invalidate_range_start/end. For KVM
  mmu_notifier_invalidate_range is a noop and rightfully so. A MMU
  notifier implementation has to implement either ->invalidate_range
  method or the invalidate_range_start/end methods, not both. And if you
  implement invalidate_range_start/end like KVM is forced to do, calling
  mmu_notifier_invalidate_range in common code is a noop for KVM.

  For those MMU notifiers that can get away only implementing
  ->invalidate_range, the ->invalidate_range is implicitly called by
  mmu_notifier_invalidate_range_end(). And only those secondary MMUs
  that share the same pagetable with the primary MMU (like AMD iommuv2)
  can get away only implementing ->invalidate_range"

As the callback is allowed to sleep and the implementation is out of
hand of the MM it is safer to simply bail out if there is an mmu
notifier registered.  In order to not fail too early make the
mm_has_notifiers check under the oom_lock and have a little nap before
failing to give the current oom victim some more time to exit.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170913113427.2291-1-mhocko@kernel.org
Fixes: aac453635549 ("mm, oom: introduce oom reaper")
Signed-off-by: Michal Hocko 
Reported-by: Andrea Arcangeli 
Reviewed-by: Andrea Arcangeli 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

iio: ad_sigma_delta: Implement a dedicated reset function

2017-10-12T09:51:18+00:00

commit 7fc10de8d49a748c476532c9d8e8fe19e548dd67 upstream.

Since most of the SD ADCs have the option of reseting the serial
interface by sending a number of SCLKs with CS = 0 and DIN = 1,
a dedicated function that can do this is usefull.

Needed for the patch:  iio: ad7793: Fix the serial interface reset
Signed-off-by: Dragos Bogdan 
Acked-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

mmc: sdio: fix alignment issue in struct sdio_func

2017-10-08T08:26:08+00:00

[ Upstream commit 5ef1ecf060f28ecef313b5723f1fd39bf5a35f56 ]

Certain 64-bit systems (e.g. Amlogic Meson GX) require buffers to be
used for DMA to be 8-byte-aligned. struct sdio_func has an embedded
small DMA buffer not meeting this requirement.
When testing switching to descriptor chain mode in meson-gx driver
SDIO is broken therefore. Fix this by allocating the small DMA buffer
separately as kmalloc ensures that the returned memory area is
properly aligned for every basic data type.

Signed-off-by: Heiner Kallweit 
Tested-by: Helmut Klein 
Signed-off-by: Ulf Hansson 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

audit: log 32-bit socketcalls

2017-10-08T08:26:06+00:00

[ Upstream commit 62bc306e2083436675e33b5bdeb6a77907d35971 ]

32-bit socketcalls were not being logged by audit on x86_64 systems.
Log them.  This is basically a duplicate of the call from
net/socket.c:sys_socketcall(), but it addresses the impedance mismatch
between 32-bit userspace process and 64-bit kernel audit.

See: https://github.com/linux-audit/audit-kernel/issues/14

Signed-off-by: Richard Guy Briggs 
Acked-by: David S. Miller 
Signed-off-by: Paul Moore 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman