linux.git/include/linux, branch v5.15.185

tpm: tis: Double the timeout B to 4s

2025-06-04T12:38:08+00:00

[ Upstream commit 2f661f71fda1fc0c42b7746ca5b7da529eb6b5be ]

With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.

Timeout C is retried since
commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")

Timeout B still needs to be extended.

The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.

When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.

Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22

tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83

tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63

Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek 
Reviewed-by: Jarkko Sakkinen 
Signed-off-by: Jarkko Sakkinen 
Signed-off-by: Sasha Levin

coredump: hand a pidfd to the usermode coredump helper

2025-06-04T12:38:07+00:00

commit b5325b2a270fcaf7b2a9a0f23d422ca8a5a8bdea upstream.

Give userspace a way to instruct the kernel to install a pidfd into the
usermode helper process. This makes coredump handling a lot more
reliable for userspace. In parallel with this commit we already have
systemd adding support for this in [1].

We create a pidfs file for the coredumping process when we process the
corename pattern. When the usermode helper process is forked we then
install the pidfs file as file descriptor three into the usermode
helpers file descriptor table so it's available to the exec'd program.

Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is empty
and can thus always use three as the file descriptor number.

Note, that we'll install a pidfd for the thread-group leader even if a
subthread is calling do_coredump(). We know that task linkage hasn't
been removed due to delay_group_leader() and even if this @current isn't
the actual thread-group leader we know that the thread-group leader
cannot be reaped until @current has exited.

[brauner: This is a backport for the v5.14 series. Upstream has
significantly changed and backporting all that infra is a non-starter.
So simply backport the pidfd_prepare() helper and waste the file
descriptor we allocated. Then we minimally massage the umh coredump
setup code.]

Link: https://github.com/systemd/systemd/pull/37125 [1]
Link: https://lore.kernel.org/20250414-work-coredump-v2-3-685bf231f828@kernel.org
Tested-by: Luca Boccassi 
Reviewed-by: Oleg Nesterov 
Signed-off-by: Christian Brauner 
Signed-off-by: Greg Kroah-Hartman

pid: add pidfd_prepare()

2025-06-04T12:38:07+00:00

commit 6ae930d9dbf2d093157be33428538c91966d8a9f upstream.

Add a new helper that allows to reserve a pidfd and allocates a new
pidfd file that stashes the provided struct pid. This will allow us to
remove places that either open code this function or that call
pidfd_create() but then have to call close_fd() because there are still
failure points after pidfd_create() has been called.

Reviewed-by: Jan Kara 
Message-Id: <20230327-pidfd-file-api-v1-1-5c0e9a3158e4@kernel.org>
Signed-off-by: Christian Brauner 
Signed-off-by: Greg Kroah-Hartman

rcu: fix header guard for rcu_all_qs()

2025-06-04T12:38:03+00:00

[ Upstream commit ad6b5b73ff565e88aca7a7d1286788d80c97ba71 ]

rcu_all_qs() is defined for !CONFIG_PREEMPT_RCU but the declaration
is conditioned on CONFIG_PREEMPTION.

With CONFIG_PREEMPT_LAZY, CONFIG_PREEMPTION=y does not imply
CONFIG_PREEMPT_RCU=y.

Decouple the two.

Cc: Paul E. McKenney 
Reviewed-by: Frederic Weisbecker 
Reviewed-by: Sebastian Andrzej Siewior 
Signed-off-by: Ankur Arora 
Signed-off-by: Paul E. McKenney 
Signed-off-by: Boqun Feng 
Signed-off-by: Sasha Levin

r8152: add vendor/device ID pair for Dell Alienware AW1022z

2025-06-04T12:38:03+00:00

[ Upstream commit 848b09d53d923b4caee5491f57a5c5b22d81febc ]

The Dell AW1022z is an RTL8156B based 2.5G Ethernet controller.

Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.

Signed-off-by: Aleksander Jan Bajkowski 
Link: https://patch.msgid.link/20250206224033.980115-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net/mlx4_core: Avoid impossible mlx4_db_alloc() order value

2025-06-04T12:38:02+00:00

[ Upstream commit 4a6f18f28627e121bd1f74b5fcc9f945d6dbeb1e ]

GCC can see that the value range for "order" is capped, but this leads
it to consider that it might be negative, leading to a false positive
warning (with GCC 15 with -Warray-bounds -fdiagnostics-details):

../drivers/net/ethernet/mellanox/mlx4/alloc.c:691:47: error: array subscript -1 is below array bounds of 'long unsigned int *[2]' [-Werror=array-bounds=]
  691 |                 i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o);
      |                                    ~~~~~~~~~~~^~~
  'mlx4_alloc_db_from_pgdir': events 1-2
  691 |                 i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o);                        |                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |                     |                         |                                                   |                     |                         (2) out of array bounds here
      |                     (1) when the condition is evaluated to true                             In file included from ../drivers/net/ethernet/mellanox/mlx4/mlx4.h:53,
                 from ../drivers/net/ethernet/mellanox/mlx4/alloc.c:42:
../include/linux/mlx4/device.h:664:33: note: while referencing 'bits'
  664 |         unsigned long          *bits[2];
      |                                 ^~~~

Switch the argument to unsigned int, which removes the compiler needing
to consider negative values.

Signed-off-by: Kees Cook 
Link: https://patch.msgid.link/20250210174504.work.075-kees@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

crypto: lzo - Fix compression buffer overrun

2025-06-04T12:37:58+00:00

[ Upstream commit cc47f07234f72cbd8e2c973cdbf2a6730660a463 ]

Unlike the decompression code, the compression code in LZO never
checked for output overruns.  It instead assumes that the caller
always provides enough buffer space, disregarding the buffer length
provided by the caller.

Add a safe compression interface that checks for the end of buffer
before each write.  Use the safe interface in crypto/lzo.

Signed-off-by: Herbert Xu 
Reviewed-by: David Sterba 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

ipv6: save dontfrag in cork

2025-06-04T12:37:57+00:00

[ Upstream commit a18dfa9925b9ef6107ea3aa5814ca3c704d34a8a ]

When spanning datagram construction over multiple send calls using
MSG_MORE, per datagram settings are configured on the first send.

That is when ip(6)_setup_cork stores these settings for subsequent use
in __ip(6)_append_data and others.

The only flag that escaped this was dontfrag. As a result, a datagram
could be constructed with df=0 on the first sendmsg, but df=1 on a
next. Which is what cmsg_ip.sh does in an upcoming MSG_MORE test in
the "diff" scenario.

Changing datagram conditions in the middle of constructing an skb
makes this already complex code path even more convoluted. It is here
unintentional. Bring this flag in line with expected sockopt/cmsg
behavior.

And stop passing ipc6 to __ip6_append_data, to avoid such issues
in the future. This is already the case for __ip_append_data.

inet6_cork had a 6 byte hole, so the 1B flag has no impact.

Signed-off-by: Willem de Bruijn 
Reviewed-by: Eric Dumazet 
Link: https://patch.msgid.link/20250307033620.411611-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

tracing: Mark binary printing functions with __printf() attribute

2025-06-04T12:37:54+00:00

[ Upstream commit 196a062641fe68d9bfe0ad36b6cd7628c99ad22c ]

Binary printing functions are using printf() type of format, and compiler
is not happy about them as is:

kernel/trace/trace.c:3292:9: error: function ‘trace_vbprintk’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
kernel/trace/trace_seq.c:182:9: error: function ‘trace_seq_bprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]

Fix the compilation errors by adding __printf() attribute.

While at it, move existing __printf() attributes from the implementations
to the declarations. IT also fixes incorrect attribute parameters that are
used for trace_array_printk().

Signed-off-by: Andy Shevchenko 
Reviewed-by: Kees Cook 
Reviewed-by: Petr Mladek 
Link: https://lore.kernel.org/r/20250321144822.324050-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek 
Signed-off-by: Sasha Levin

dma-mapping: avoid potential unused data compilation warning

2025-06-04T12:37:54+00:00

[ Upstream commit c9b19ea63036fc537a69265acea1b18dabd1cbd3 ]

When CONFIG_NEED_DMA_MAP_STATE is not defined, dma-mapping clients might
report unused data compilation warnings for dma_unmap_*() calls
arguments. Redefine macros for those calls to let compiler to notice that
it is okay when the provided arguments are not used.

Reported-by: Andy Shevchenko 
Suggested-by: Jakub Kicinski 
Signed-off-by: Marek Szyprowski 
Tested-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20250415075659.428549-1-m.szyprowski@samsung.com
Signed-off-by: Sasha Levin