Pull tty and serial driver fixes from Greg KH:
 "Here are some TTY and Serial driver fixes for 5.19-rc7. They resolve a
  number of reported problems including:

   - longtime bug in pty_write() that has been reported in the past.

   - 8250 driver fixes

   - new serial device ids

   - vt overlapping data copy bugfix

   - other tiny serial driver bugfixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()
  tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()
  serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  vt: fix memory overlapping when deleting chars in the buffer
  serial: mvebu-uart: correctly report configured baudrate value
  serial: 8250: Fix PM usage_count for console handover
  serial: 8250: fix return error code in serial8250_request_std_resource()
  serial: stm32: Clear prev values before setting RTS delays
  tty: Add N_CAN327 line discipline ID for ELM327 based CAN driver
  serial: 8250: Fix __stop_tx() & DMA Tx restart races
  serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
  tty: serial: samsung_tty: set dma burst_size to 1
  serial: 8250: dw: enable using pdata with ACPI

Pull KVM fixes from Paolo Bonzini:
 "RISC-V:
   - Fix missing PAGE_PFN_MASK

   - Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()

  x86:
   - Fix for nested virtualization when TSC scaling is active

   - Estimate the size of fastcc subroutines conservatively, avoiding
     disastrous underestimation when return thunks are enabled

   - Avoid possible use of uninitialized fields of 'struct
     kvm_lapic_irq'

  Generic:
   - Mark as such the boolean values available from the statistics file
     descriptors

   - Clarify statistics documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: emulate: do not adjust size of fastop and setcc subroutines
  KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()
  Documentation: kvm: clarify histogram units
  kvm: stats: tell userspace which values are boolean
  x86/kvm: fix FASTOP_SIZE when return thunks are enabled
  KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1
  RISC-V: KVM: Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
  riscv: Fix missing PAGE_PFN_MASK

Pull ceph fix from Ilya Dryomov:
 "A folio locking fixup that Xiubo and David cooperated on, marked for
  stable. Most of it is in netfs but I picked it up into ceph tree on
  agreement with David"

* tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client:
  netfs: do not unlock and put the folio twice

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of the contents are bugfixes for the devicetree files:

   - A Qualcomm MSM8974 pin controller regression, caused by a cleanup
     patch that gets partially reverted here.

   - Missing properties for Broadcom BCM49xx to fix timer detection and
     SMP boot.

   - Fix touchscreen pinctrl for imx6ull-colibri board

   - Multiple fixes for Rockchip rk3399 based machines including the vdu
     clock-rate fix, otg port fix on Quartz64-A and ethernet on
     Quartz64-B

   - Fixes for misspelled DT contents causing minor problems on
     imx6qdl-ts7970m, orangepi-zero, sama5d2, kontron-kswitch-d10, and
     ls1028a

  And a couple of changes elsewhere:

   - Fix binding for Allwinner D1 display pipeline

   - Trivial code fixes to the TEE and reset controller driver
     subsystems and the rockchip platform code.

   - Multiple updates to the MAINTAINERS files, marking the Palm Treo
     support as orphaned, and fixing some entries for added or changed
     file names"

* tag 'soc-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
  arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
  arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
  ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero
  ARM: dts: at91: sama5d2: Fix typo in i2s1 node
  tee: tee_get_drvdata(): fix description of return value
  optee: Remove duplicate 'of' in two places.
  ARM: dts: kswitch-d10: use open drain mode for coma-mode pins
  ARM: dts: colibri-imx6ull: fix snvs pinmux group
  optee: smc_abi.c: fix wrong pointer passed to IS_ERR/PTR_ERR()
  MAINTAINERS: add polarfire rng, pci and clock drivers
  MAINTAINERS: mark ARM/PALM TREO SUPPORT orphan
  ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count
  arm64: dts: ls1028a: Update SFP node to include clock
  dt-bindings: display: sun4i: Fix D1 pipeline count
  ARM: dts: qcom: msm8974: re-add missing pinctrl
  reset: Fix devm bulk optional exclusive control getter
  MAINTAINERS: rectify entry for SYNOPSYS AXS10x RESET CONTROLLER DRIVER
  ARM: rockchip: Add missing of_node_put() in rockchip_suspend_init()
  arm64: dts: rockchip: Assign RK3399 VDU clock rate
  arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior
  ...

Pull integrity fixes from Mimi Zohar:
 "Here are a number of fixes for recently found bugs.

  Only 'ima: fix violation measurement list record' was introduced in
  the current release. The rest address existing bugs"

* tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Fix potential memory leak in ima_init_crypto()
  ima: force signature verification when CONFIG_KEXEC_SIG is configured
  ima: Fix a potential integer overflow in ima_appraise_measurement
  ima: fix violation measurement list record
  Revert "evm: Fix memleak in init_desc"

Some of the statistics values exported by KVM are always only 0 or 1.
It can be useful to export this fact to userspace so that it can track
them specially (for example by polling the value every now and then to
compute a % of time spent in a specific state).

Therefore, add "boolean value" as a new "unit".  While it is not exactly
a unit, it walks and quacks like one.  In particular, using the type
would be wrong because boolean values could be instantaneous or peak
values (e.g. "is the rmap allocated?") or even two-bucket histograms
(e.g. "number of posted vs. non-posted interrupt injections").

Suggested-by: Amneesh Singh <natto@weirdnatto.in>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

check_write_begin() will unlock and put the folio when return
non-zero.  So we should avoid unlocking and putting it twice in
netfs layer.

Change the way ->check_write_begin() works in the following two ways:

 (1) Pass it a pointer to the folio pointer, allowing it to unlock and put
     the folio prior to doing the stuff it wants to do, provided it clears
     the folio pointer.

 (2) Change the return values such that 0 with folio pointer set means
     continue, 0 with folio pointer cleared means re-get and all error
     codes indicating an error (no special treatment for -EAGAIN).

[ bagasdotme: use Sphinx code text syntax for *foliop pointer ]

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/56423
Link: https://lore.kernel.org/r/cf169f43-8ee7-8697-25da-0204d1b4343e@redhat.com
Co-developed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Pull cgroup fix from Tejun Heo:
 "Fix an old and subtle bug in the migration path.

  css_sets are used to track tasks and migrations are tasks moving from
  a group of css_sets to another group of css_sets. The migration path
  pins all source and destination css_sets in the prep stage.

  Unfortunately, it was overloading the same list_head entry to track
  sources and destinations, which got confused for migrations which are
  partially identity leading to use-after-frees.

  Fixed by using dedicated list_heads for tracking sources and
  destinations"

* tag 'cgroup-for-5.19-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Use separate src/dst nodes when preloading css_sets for migration

Currently, an unsigned kernel could be kexec'ed when IMA arch specific
policy is configured unless lockdown is enabled. Enforce kernel
signature verification check in the kexec_file_load syscall when IMA
arch specific policy is configured.

Fixes: 99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE")
Reported-and-suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

Pull x86 retbleed fixes from Borislav Petkov:
 "Just when you thought that all the speculation bugs were addressed and
  solved and the nightmare is complete, here's the next one: speculating
  after RET instructions and leaking privileged information using the
  now pretty much classical covert channels.

  It is called RETBleed and the mitigation effort and controlling
  functionality has been modelled similar to what already existing
  mitigations provide"

* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  x86/speculation: Disable RRSBA behavior
  x86/kexec: Disable RET on kexec
  x86/bugs: Do not enable IBPB-on-entry when IBPB is not supported
  x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entry
  x86/bugs: Add Cannon lake to RETBleed affected CPU list
  x86/retbleed: Add fine grained Kconfig knobs
  x86/cpu/amd: Enumerate BTC_NO
  x86/common: Stamp out the stepping madness
  KVM: VMX: Prevent RSB underflow before vmenter
  x86/speculation: Fill RSB on vmexit for IBRS
  KVM: VMX: Fix IBRS handling after vmexit
  KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS
  KVM: VMX: Convert launched argument to flags
  KVM: VMX: Flatten __vmx_vcpu_run()
  objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}
  x86/speculation: Remove x86_spec_ctrl_mask
  x86/speculation: Use cached host SPEC_CTRL value for guest entry/exit
  x86/speculation: Fix SPEC_CTRL write on SMT state change
  x86/speculation: Fix firmware entry SPEC_CTRL handling
  x86/speculation: Fix RSB filling with CONFIG_RETPOLINE=n
  ...