linux.git/include/net/mana, branch v6.18.21 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency. 2025-08-19T12:42:44+00:00 Dipayaan Roy dipayanroy@linux.microsoft.com 2025-08-14T14:04:10+00:00 730ff06d3f5cc2ce0348414b78c10528b767d4a3 This patch enhances RX buffer handling in the mana driver by allocating pages from a page pool and slicing them into MTU-sized fragments, rather than dedicating a full page per packet. This approach is especially beneficial on systems with large base page sizes like 64KB. Key improvements: - Proper integration of page pool for RX buffer allocations. - MTU-sized buffer slicing to improve memory utilization. - Reduce overall per Rx queue memory footprint. - Automatic fallback to full-page buffers when: * Jumbo frames are enabled (MTU > PAGE_SIZE / 2). * The XDP path is active, to avoid complexities with fragment reuse. Testing on VMs with 64KB pages shows around 200% throughput improvement. Memory efficiency is significantly improved due to reduced wastage in page allocations. Example: We are now able to fit 35 rx buffers in a single 64kb page for MTU size of 1500, instead of 1 rx buffer per page previously. Tested: - iperf3, iperf2, and nttcp benchmarks. - Jumbo frames with MTU 9000. - Native XDP programs (XDP_PASS, XDP_DROP, XDP_TX, XDP_REDIRECT) for testing the XDP path in driver. - Memory leak detection (kmemleak). - Driver load/unload, reboot, and stress scenarios. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/20250814140410.GA22089@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
This patch enhances RX buffer handling in the mana driver by allocating
pages from a page pool and slicing them into MTU-sized fragments, rather
than dedicating a full page per packet. This approach is especially
beneficial on systems with large base page sizes like 64KB.

Key improvements:

- Proper integration of page pool for RX buffer allocations.
- MTU-sized buffer slicing to improve memory utilization.
- Reduce overall per Rx queue memory footprint.
- Automatic fallback to full-page buffers when:
   * Jumbo frames are enabled (MTU > PAGE_SIZE / 2).
   * The XDP path is active, to avoid complexities with fragment reuse.

Testing on VMs with 64KB pages shows around 200% throughput improvement.
Memory efficiency is significantly improved due to reduced wastage in page
allocations. Example: We are now able to fit 35 rx buffers in a single 64kb
page for MTU size of 1500, instead of 1 rx buffer per page previously.

Tested:

- iperf3, iperf2, and nttcp benchmarks.
- Jumbo frames with MTU 9000.
- Native XDP programs (XDP_PASS, XDP_DROP, XDP_TX, XDP_REDIRECT) for
  testing the XDP path in driver.
- Memory leak detection (kmemleak).
- Driver load/unload, reboot, and stress scenarios.

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20250814140410.GA22089@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: mana: Handle Reset Request from MANA NIC 2025-07-02T02:17:53+00:00 Haiyang Zhang haiyangz@microsoft.com 2025-06-27T20:26:23+00:00 fbe346ce9d626680a4dd0f079e17c7b5dd32ffad Upon receiving the Reset Request, pause the connection and clean up queues, wait for the specified period, then resume the NIC. In the cleanup phase, the HWC is no longer responding, so set hwc_timeout to zero to skip waiting on the response. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://patch.msgid.link/1751055983-29760-1-git-send-email-haiyangz@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Upon receiving the Reset Request, pause the connection and clean up
queues, wait for the specified period, then resume the NIC.
In the cleanup phase, the HWC is no longer responding, so set hwc_timeout
to zero to skip waiting on the response.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1751055983-29760-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: mana: Handle unsupported HWC commands 2025-06-19T13:13:49+00:00 Erni Sri Satya Vennela ernis@linux.microsoft.com 2025-06-17T07:17:36+00:00 ca8ac489ca33c986ff02ee14c3e1c10b86355428 If any of the HWC commands are not recognized by the underlying hardware, the hardware returns the response header status of -1. Log the information using netdev_info_once to avoid multiple error logs in dmesg. Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
If any of the HWC commands are not recognized by the
underlying hardware, the hardware returns the response
header status of -1. Log the information using
netdev_info_once to avoid multiple error logs in dmesg.

Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: mana: Add speed support in mana_get_link_ksettings 2025-06-19T13:13:49+00:00 Erni Sri Satya Vennela ernis@linux.microsoft.com 2025-06-17T07:17:35+00:00 a6d5edf11e0cf5a4650f1d353d20ec29de093813 Allow mana ethtool get_link_ksettings operation to report the maximum speed supported by the SKU in mbps. The driver retrieves this information by issuing a HWC command to the hardware via mana_query_link_cfg(), which retrieves the SKU's maximum supported speed. These APIs when invoked on hardware that are older/do not support these APIs, the speed would be reported as UNKNOWN. Before: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: Unknown! Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes After: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 16000Mb/s Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.

The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.

These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.

Before:
$ethtool enP30832s1
> Settings for enP30832s1:
        Supported ports: [  ]
        Supported link modes:   Not reported
        Supported pause frame use: No
        Supports auto-negotiation: No
        Supported FEC modes: Not reported
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: Unknown!
        Duplex: Full
        Auto-negotiation: off
        Port: Other
        PHYAD: 0
        Transceiver: internal
        Link detected: yes

After:
$ethtool enP30832s1
> Settings for enP30832s1:
        Supported ports: [  ]
        Supported link modes:   Not reported
        Supported pause frame use: No
        Supports auto-negotiation: No
        Supported FEC modes: Not reported
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: 16000Mb/s
        Duplex: Full
        Auto-negotiation: off
        Port: Other
        PHYAD: 0
        Transceiver: internal
        Link detected: yes

Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: mana: Add support for net_shaper_ops 2025-06-19T13:13:49+00:00 Erni Sri Satya Vennela ernis@linux.microsoft.com 2025-06-17T07:17:34+00:00 75cabb46935b6de8e2bdfde563e460ac41cfff12 Introduce support for net_shaper_ops in the MANA driver, enabling configuration of rate limiting on the MANA NIC. To apply rate limiting, the driver issues a HWC command via mana_set_bw_clamp() and updates the corresponding shaper object in the net_shaper cache. If an error occurs during this process, the driver restores the previous speed by querying the current link configuration using mana_query_link_cfg(). The minimum supported bandwidth is 100 Mbps, and only values that are exact multiples of 100 Mbps are allowed. Any other values are rejected. To remove a shaper, the driver resets the bandwidth to the maximum supported by the SKU using mana_set_bw_clamp() and clears the associated cache entry. If an error occurs during this process, the shaper details are retained. On the hardware that does not support these APIs, the net-shaper calls to set speed would fail. Set the speed: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do set --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }, "bw-max": 200000000 }' Get the shaper details: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do get --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }}' > {'bw-max': 200000000, > 'handle': {'scope': 'netdev'}, > 'ifindex': $IFINDEX, > 'metric': 'bps'} Delete the shaper object: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do delete --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev","id":'$ID' }}' Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Introduce support for net_shaper_ops in the MANA driver,
enabling configuration of rate limiting on the MANA NIC.

To apply rate limiting, the driver issues a HWC command via
mana_set_bw_clamp() and updates the corresponding shaper object
in the net_shaper cache. If an error occurs during this process,
the driver restores the previous speed by querying the current link
configuration using mana_query_link_cfg().

The minimum supported bandwidth is 100 Mbps, and only values that are
exact multiples of 100 Mbps are allowed. Any other values are rejected.

To remove a shaper, the driver resets the bandwidth to the maximum
supported by the SKU using mana_set_bw_clamp() and clears the
associated cache entry. If an error occurs during this process,
the shaper details are retained.

On the hardware that does not support these APIs, the net-shaper
calls to set speed would fail.

Set the speed:
./tools/net/ynl/pyynl/cli.py \
 --spec Documentation/netlink/specs/net_shaper.yaml \
 --do set --json '{"ifindex":'$IFINDEX',
		   "handle":{"scope": "netdev", "id":'$ID' },
		   "bw-max": 200000000 }'

Get the shaper details:
./tools/net/ynl/pyynl/cli.py \
 --spec Documentation/netlink/specs/net_shaper.yaml \
 --do get --json '{"ifindex":'$IFINDEX',
		      "handle":{"scope": "netdev", "id":'$ID' }}'

> {'bw-max': 200000000,
> 'handle': {'scope': 'netdev'},
> 'ifindex': $IFINDEX,
> 'metric': 'bps'}

Delete the shaper object:
./tools/net/ynl/pyynl/cli.py \
 --spec Documentation/netlink/specs/net_shaper.yaml \
 --do delete --json '{"ifindex":'$IFINDEX',
		      "handle":{"scope": "netdev","id":'$ID' }}'

Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge branch 'shradha_v6.16-rc1' of https://github.com/shradhagupta6/linux 2025-06-17T21:44:41+00:00 Jakub Kicinski kuba@kernel.org 2025-06-17T21:43:58+00:00 0f0decc777d7ed4d7ba316a5f92495e38c6fc6b1 Shradha Gupta says: ==================== Allow dyn MSI-X vector allocation of MANA In this patchset we want to enable the MANA driver to be able to allocate MSI-X vectors in PCI dynamically. The first patch exports pci_msix_prepare_desc() in PCI to be able to correctly prepare descriptors for dynamically added MSI-X vectors. The second patch adds the support of dynamic vector allocation in pci-hyperv PCI controller by enabling the MSI_FLAG_PCI_MSIX_ALLOC_DYN flag and using the pci_msix_prepare_desc() exported in first patch. The third patch adds a detailed description of the irq_setup(), to help understand the function design better. The fourth patch is a preparation patch for mana changes to support dynamic IRQ allocation. It contains changes in irq_setup() to allow skipping first sibling CPU sets, in case certain IRQs are already affinitized to them. The fifth patch has the changes in MANA driver to be able to allocate MSI-X vectors dynamically. If the support does not exist it defaults to older behavior. * 'shradha_v6.16-rc1' of https://github.com/shradhagupta6/linux: net: mana: Allocate MSI-X vectors dynamically net: mana: Allow irq_setup() to skip cpus for affinity net: mana: explain irq_setup() algorithm PCI: hv: Allow dynamic MSI-X vector allocation PCI/MSI: Export pci_msix_prepare_desc() for dynamic MSI-X allocations ==================== Link: https://patch.msgid.link/1749650984-9193-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Shradha Gupta says:

====================
Allow dyn MSI-X vector allocation of MANA

In this patchset we want to enable the MANA driver to be able to
allocate MSI-X vectors in PCI dynamically.

The first patch exports pci_msix_prepare_desc() in PCI to be able to
correctly prepare descriptors for dynamically added MSI-X vectors.

The second patch adds the support of dynamic vector allocation in
pci-hyperv PCI controller by enabling the MSI_FLAG_PCI_MSIX_ALLOC_DYN
flag and using the pci_msix_prepare_desc() exported in first patch.

The third patch adds a detailed description of the irq_setup(), to
help understand the function design better.

The fourth patch is a preparation patch for mana changes to support
dynamic IRQ allocation. It contains changes in irq_setup() to allow
skipping first sibling CPU sets, in case certain IRQs are already
affinitized to them.

The fifth patch has the changes in MANA driver to be able to allocate
MSI-X vectors dynamically. If the support does not exist it defaults to
older behavior.

* 'shradha_v6.16-rc1' of https://github.com/shradhagupta6/linux:
  net: mana: Allocate MSI-X vectors dynamically
  net: mana: Allow irq_setup() to skip cpus for affinity
  net: mana: explain irq_setup() algorithm
  PCI: hv: Allow dynamic MSI-X vector allocation
  PCI/MSI: Export pci_msix_prepare_desc() for dynamic MSI-X allocations
====================

Link: https://patch.msgid.link/1749650984-9193-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: mana: Allocate MSI-X vectors dynamically 2025-06-17T06:15:15+00:00 Shradha Gupta shradhagupta@linux.microsoft.com 2025-06-11T14:11:13+00:00 755391121038c06cb653241aa94dcabd87179f62 Currently, the MANA driver allocates MSI-X vectors statically based on MANA_MAX_NUM_QUEUES and num_online_cpus() values and in some cases ends up allocating more vectors than it needs. This is because, by this time we do not have a HW channel and do not know how many IRQs should be allocated. To avoid this, we allocate 1 MSI-X vector during the creation of HWC and after getting the value supported by hardware, dynamically add the remaining MSI-X vectors. Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> 
Currently, the MANA driver allocates MSI-X vectors statically based on
MANA_MAX_NUM_QUEUES and num_online_cpus() values and in some cases ends
up allocating more vectors than it needs. This is because, by this time
we do not have a HW channel and do not know how many IRQs should be
allocated.

To avoid this, we allocate 1 MSI-X vector during the creation of HWC and
after getting the value supported by hardware, dynamically add the
remaining MSI-X vectors.

Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
net: mana: Add handler for hardware servicing events 2025-06-16T22:19:48+00:00 Haiyang Zhang haiyangz@microsoft.com 2025-06-13T17:00:34+00:00 7768c5f417336fa58dbfef9bb7ecd7eeec6d8886 To collaborate with hardware servicing events, upon receiving the special EQE notification from the HW channel, remove the devices on this bus. Then, after a waiting period based on the device specs, rescan the parent bus to recover the devices. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1749834034-18498-1-git-send-email-haiyangz@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
To collaborate with hardware servicing events, upon receiving the special
EQE notification from the HW channel, remove the devices on this bus.
Then, after a waiting period based on the device specs, rescan the parent
bus to recover the devices.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1749834034-18498-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: mana: Expose additional hardware counters for drop and TC via ethtool. 2025-06-10T21:23:19+00:00 Dipayaan Roy dipayanroy@linux.microsoft.com 2025-06-09T10:01:03+00:00 c09ef59e17c6921c577d54bc8da4331b955d01a7 Add support for reporting additional hardware counters for drop and TC using the ethtool -S interface. These counters include: - Aggregate Rx/Tx drop counters - Per-TC Rx/Tx packet counters - Per-TC Rx/Tx byte counters - Per-TC Rx/Tx pause frame counters The counters are exposed using ethtool_ops->get_ethtool_stats and ethtool_ops->get_strings. This feature/counters are not available to all versions of hardware. Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://patch.msgid.link/20250609100103.GA7102@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Add support for reporting additional hardware counters for drop and
TC using the ethtool -S interface.

These counters include:

- Aggregate Rx/Tx drop counters
- Per-TC Rx/Tx packet counters
- Per-TC Rx/Tx byte counters
- Per-TC Rx/Tx pause frame counters

The counters are exposed using ethtool_ops->get_ethtool_stats and
ethtool_ops->get_strings. This feature/counters are not available
to all versions of hardware.

Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20250609100103.GA7102@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma 2025-05-30T17:18:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-05-30T17:18:56+00:00 dd91b5e1d6448794c07378d1be12e3261c8769e7 Pull rdma updates from Jason Gunthorpe: "Usual collection of driver fixes: - Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw - Further ODP functionality in rxe - Remote access MRs in mana, along with more page sizes - Improve CM scalability with a rwlock around the agent - More trace points for hns - ODP hmm conversion to the new two step dma API - Support the ethernet HW device in mana as well as the RNIC - Cleanups: - Use secs_to_jiffies() when appropriate - Use ERR_CAST() instead of naked casts - Don't use %pK in printk - Unusued functions removed - Allocation type matching" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (57 commits) RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work RDMA/bnxt_re: Support extended stats for Thor2 VF RDMA/hns: Fix endian issue in trace events RDMA/mlx5: Avoid flexible array warning IB/cm: Remove dead code and adjust naming RDMA/core: Avoid hmm_dma_map_alloc() for virtual DMA devices RDMA/rxe: Break endless pagefault loop for RO pages RDMA/bnxt_re: Fix return code of bnxt_re_configure_cc RDMA/bnxt_re: Fix missing error handling for tx_queue RDMA/bnxt_re: Fix incorrect display of inactivity_cp in debugfs output RDMA/mlx5: Add support for 200Gbps per lane speeds RDMA/mlx5: Remove the redundant MLX5_IB_STAGE_UAR stage RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction net: mana: Add support for auxiliary device servicing events RDMA/mana_ib: unify mana_ib functions to support any gdma device RDMA/mana_ib: Add support of mana_ib for RNIC and ETH nic net: mana: Probe rdma device in mana driver RDMA/siw: replace redundant ternary operator with just rv RDMA/umem: Separate implicit ODP initialization from explicit ODP RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage ... 
Pull rdma updates from Jason Gunthorpe:
 "Usual collection of driver fixes:

   - Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw

   - Further ODP functionality in rxe

   - Remote access MRs in mana, along with more page sizes

   - Improve CM scalability with a rwlock around the agent

   - More trace points for hns

   - ODP hmm conversion to the new two step dma API

   - Support the ethernet HW device in mana as well as the RNIC

   - Cleanups:
       - Use secs_to_jiffies() when appropriate
       - Use ERR_CAST() instead of naked casts
       - Don't use %pK in printk
       - Unusued functions removed
       - Allocation type matching"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (57 commits)
  RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work
  RDMA/bnxt_re: Support extended stats for Thor2 VF
  RDMA/hns: Fix endian issue in trace events
  RDMA/mlx5: Avoid flexible array warning
  IB/cm: Remove dead code and adjust naming
  RDMA/core: Avoid hmm_dma_map_alloc() for virtual DMA devices
  RDMA/rxe: Break endless pagefault loop for RO pages
  RDMA/bnxt_re: Fix return code of bnxt_re_configure_cc
  RDMA/bnxt_re: Fix missing error handling for tx_queue
  RDMA/bnxt_re: Fix incorrect display of inactivity_cp in debugfs output
  RDMA/mlx5: Add support for 200Gbps per lane speeds
  RDMA/mlx5: Remove the redundant MLX5_IB_STAGE_UAR stage
  RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction
  net: mana: Add support for auxiliary device servicing events
  RDMA/mana_ib: unify mana_ib functions to support any gdma device
  RDMA/mana_ib: Add support of mana_ib for RNIC and ETH nic
  net: mana: Probe rdma device in mana driver
  RDMA/siw: replace redundant ternary operator with just rv
  RDMA/umem: Separate implicit ODP initialization from explicit ODP
  RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage
  ...