linux.git/include/net/ping.h, branch v6.12.80

net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294

2023-06-02T08:55:22+00:00

With this commit, all the GIDs ("0 4294967294") can be written to the
"net.ipv4.ping_group_range" sysctl.

Note that 4294967295 (0xffffffff) is an invalid GID (see gid_valid() in
include/linux/uidgid.h), and an attempt to register this number will cause
-EINVAL.

Prior to this commit, only up to GID 2147483647 could be covered.
Documentation/networking/ip-sysctl.rst had "0 4294967295" as an example
value, but this example was wrong and causing -EINVAL.

Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Co-developed-by: Kuniyuki Iwashima 
Signed-off-by: Kuniyuki Iwashima 
Signed-off-by: Akihiro Suda 
Signed-off-by: David S. Miller

inet: ping: use hlist_nulls rcu iterator during lookup

2022-12-01T11:42:46+00:00

ping_lookup() does not acquire the table spinlock, so iteration should
use hlist_nulls_for_each_entry_rcu().

Spotted during code review.

Fixes: dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock")
Cc: Eric Dumazet 
Signed-off-by: Florian Westphal 
Link: https://lore.kernel.org/r/20221129140644.28525-1-fw@strlen.de
Signed-off-by: Paolo Abeni

net: remove noblock parameter from recvmsg() entities

2022-04-12T13:00:25+00:00

The internal recvmsg() functions have two parameters 'flags' and 'noblock'
that were merged inside skb_recv_datagram(). As a follow up patch to commit
f4b41f062c42 ("net: remove noblock parameter from skb_recv_datagram()")
this patch removes the separate 'noblock' parameter for recvmsg().

Analogue to the referenced patch for skb_recv_datagram() the 'flags' and
'noblock' parameters are unnecessarily split up with e.g.

err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT,
                           flags & ~MSG_DONTWAIT, &addr_len);

or in

err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg,
                      sk, msg, size, flags & MSG_DONTWAIT,
                      flags & ~MSG_DONTWAIT, &addr_len);

instead of simply using only flags all the time and check for MSG_DONTWAIT
where needed (to preserve for the formerly separated no(n)block condition).

Signed-off-by: Oliver Hartkopp 
Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.net
Signed-off-by: Paolo Abeni

net: icmp: add skb drop reasons to icmp protocol

2022-04-11T09:38:37+00:00

Replace kfree_skb() used in icmp_rcv() and icmpv6_rcv() with
kfree_skb_reason().

In order to get the reasons of the skb drops after icmp message handle,
we change the return type of 'handler()' in 'struct icmp_control' from
'bool' to 'enum skb_drop_reason'. This may change its original
intention, as 'false' means failure, but 'SKB_NOT_DROPPED_YET' means
success now. Therefore, all 'handler' and the call of them need to be
handled. Following 'handler' functions are involved:

icmp_unreach()
icmp_redirect()
icmp_echo()
icmp_timestamp()
icmp_discard()

And following new drop reasons are added:

SKB_DROP_REASON_ICMP_CSUM
SKB_DROP_REASON_INVALID_PROTO

The reason 'INVALID_PROTO' is introduced for the case that the packet
doesn't follow rfc 1122 and is dropped. This is not a common case, and
I believe we can locate the problem from the data in the packet. For now,
this 'INVALID_PROTO' is used for the icmp broadcasts with wrong types.

Maybe there should be a document file for these reasons. For example,
list all the case that causes the 'UNHANDLED_PROTO' and 'INVALID_PROTO'
drop reason. Therefore, users can locate their problems according to the
document.

Reviewed-by: Hao Peng 
Reviewed-by: Jiang Biao 
Signed-off-by: Menglong Dong 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

ipv{4,6}/ping: simplify proc file creation

2018-05-16T05:23:35+00:00

Remove the pointless ping_seq_afinfo indirection and make the code look
like most other protocols.

Signed-off-by: Christoph Hellwig

net: ping: make ping_v6_sendmsg static

2016-03-24T02:09:58+00:00

As ping_v6_sendmsg is used only in this file,
making it static

The body of "pingv6_prot" and "pingv6_protosw" were
moved at the middle of the file, to avoid having to
declare some static prototypes.

Signed-off-by: Haishuang Yan 
Signed-off-by: David S. Miller

sock: struct proto hash function may error

2016-02-11T08:54:14+00:00

In order to support fast reuseport lookups in TCP, the hash function
defined in struct proto must be capable of returning an error code.
This patch changes the function signature of all related hash functions
to return an integer and handles or propagates this return value at
all call sites.

Signed-off-by: Craig Gallek 
Signed-off-by: David S. Miller

net: Remove iocb argument from sendmsg and recvmsg

2015-03-02T18:06:31+00:00

After TIPC doesn't depend on iocb argument in its internal
implementations of sendmsg() and recvmsg() hooks defined in proto
structure, no any user is using iocb argument in them at all now.
Then we can drop the redundant iocb argument completely from kinds of
implementations of both sendmsg() and recvmsg() in the entire
networking stack.

Cc: Christoph Hellwig 
Suggested-by: Al Viro 
Signed-off-by: Ying Xue 
Signed-off-by: David S. Miller

ip: stash a pointer to msghdr in struct ping_fakehdr

2015-02-04T06:34:14+00:00

... instead of storing its ->mgs_iter.iov there

Signed-off-by: Al Viro