linux.git/include/net, branch v4.14.217

net: sched: prevent invalid Scell_log shift count

2021-01-12T19:09:09+00:00

[ Upstream commit bd1248f1ddbc48b0c30565fce897a3b6423313b8 ]

Check Scell_log shift size in red_check_params() and modify all callers
of red_check_params() to pass Scell_log.

This prevents a shift out-of-bounds as detected by UBSAN:
  UBSAN: shift-out-of-bounds in ./include/net/red.h:252:22
  shift exponent 72 is too large for 32-bit type 'int'

Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values")
Signed-off-by: Randy Dunlap 
Reported-by: syzbot+97c5bd9cc81eca63d36e@syzkaller.appspotmail.com
Cc: Nogah Frankel 
Cc: Jamal Hadi Salim 
Cc: Cong Wang 
Cc: Jiri Pirko 
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

vlan: consolidate VLAN parsing code and limit max parsing depth

2020-12-11T12:39:03+00:00

[ Upstream commit 469aceddfa3ed16e17ee30533fae45e90f62efd8 ]

Toshiaki pointed out that we now have two very similar functions to extract
the L3 protocol number in the presence of VLAN tags. And Daniel pointed out
that the unbounded parsing loop makes it possible for maliciously crafted
packets to loop through potentially hundreds of tags.

Fix both of these issues by consolidating the two parsing functions and
limiting the VLAN tag parsing to a max depth of 8 tags. As part of this,
switch over __vlan_get_protocol() to use skb_header_pointer() instead of
pskb_may_pull(), to avoid the possible side effects of the latter and keep
the skb pointer 'const' through all the parsing functions.

v2:
- Use limit of 8 tags instead of 32 (matching XMIT_RECURSION_LIMIT)

Reported-by: Toshiaki Makita 
Reported-by: Daniel Borkmann 
Fixes: d7bf2ebebc2b ("sched: consistently handle layer3 header accesses in the presence of VLANs")
Signed-off-by: Toke Høiland-Jørgensen 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bonding: wait for sysfs kobject destruction before freeing struct slave

2020-12-08T09:17:33+00:00

[ Upstream commit b9ad3e9f5a7a760ab068e33e1f18d240ba32ce92 ]

syzkaller found that with CONFIG_DEBUG_KOBJECT_RELEASE=y, releasing a
struct slave device could result in the following splat:

  kobject: 'bonding_slave' (00000000cecdd4fe): kobject_release, parent 0000000074ceb2b2 (delayed 1000)
  bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
  ------------[ cut here ]------------
  ODEBUG: free active (active state 0) object type: timer_list hint: workqueue_select_cpu_near kernel/workqueue.c:1549 [inline]
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x98 kernel/workqueue.c:1600
  WARNING: CPU: 1 PID: 842 at lib/debugobjects.c:485 debug_print_object+0x180/0x240 lib/debugobjects.c:485
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 1 PID: 842 Comm: kworker/u4:4 Tainted: G S                5.9.0-rc8+ #96
  Hardware name: linux,dummy-virt (DT)
  Workqueue: netns cleanup_net
  Call trace:
   dump_backtrace+0x0/0x4d8 include/linux/bitmap.h:239
   show_stack+0x34/0x48 arch/arm64/kernel/traps.c:142
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x174/0x1f8 lib/dump_stack.c:118
   panic+0x360/0x7a0 kernel/panic.c:231
   __warn+0x244/0x2ec kernel/panic.c:600
   report_bug+0x240/0x398 lib/bug.c:198
   bug_handler+0x50/0xc0 arch/arm64/kernel/traps.c:974
   call_break_hook+0x160/0x1d8 arch/arm64/kernel/debug-monitors.c:322
   brk_handler+0x30/0xc0 arch/arm64/kernel/debug-monitors.c:329
   do_debug_exception+0x184/0x340 arch/arm64/mm/fault.c:864
   el1_dbg+0x48/0xb0 arch/arm64/kernel/entry-common.c:65
   el1_sync_handler+0x170/0x1c8 arch/arm64/kernel/entry-common.c:93
   el1_sync+0x80/0x100 arch/arm64/kernel/entry.S:594
   debug_print_object+0x180/0x240 lib/debugobjects.c:485
   __debug_check_no_obj_freed lib/debugobjects.c:967 [inline]
   debug_check_no_obj_freed+0x200/0x430 lib/debugobjects.c:998
   slab_free_hook mm/slub.c:1536 [inline]
   slab_free_freelist_hook+0x190/0x210 mm/slub.c:1577
   slab_free mm/slub.c:3138 [inline]
   kfree+0x13c/0x460 mm/slub.c:4119
   bond_free_slave+0x8c/0xf8 drivers/net/bonding/bond_main.c:1492
   __bond_release_one+0xe0c/0xec8 drivers/net/bonding/bond_main.c:2190
   bond_slave_netdev_event drivers/net/bonding/bond_main.c:3309 [inline]
   bond_netdev_event+0x8f0/0xa70 drivers/net/bonding/bond_main.c:3420
   notifier_call_chain+0xf0/0x200 kernel/notifier.c:83
   __raw_notifier_call_chain kernel/notifier.c:361 [inline]
   raw_notifier_call_chain+0x44/0x58 kernel/notifier.c:368
   call_netdevice_notifiers_info+0xbc/0x150 net/core/dev.c:2033
   call_netdevice_notifiers_extack net/core/dev.c:2045 [inline]
   call_netdevice_notifiers net/core/dev.c:2059 [inline]
   rollback_registered_many+0x6a4/0xec0 net/core/dev.c:9347
   unregister_netdevice_many.part.0+0x2c/0x1c0 net/core/dev.c:10509
   unregister_netdevice_many net/core/dev.c:10508 [inline]
   default_device_exit_batch+0x294/0x338 net/core/dev.c:10992
   ops_exit_list.isra.0+0xec/0x150 net/core/net_namespace.c:189
   cleanup_net+0x44c/0x888 net/core/net_namespace.c:603
   process_one_work+0x96c/0x18c0 kernel/workqueue.c:2269
   worker_thread+0x3f0/0xc30 kernel/workqueue.c:2415
   kthread+0x390/0x498 kernel/kthread.c:292
   ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:925

This is a potential use-after-free if the sysfs nodes are being accessed
whilst removing the struct slave, so wait for the object destruction to
complete before freeing the struct slave itself.

Fixes: 07699f9a7c8d ("bonding: add sysfs /slave dir for bond slave devices.")
Fixes: a068aab42258 ("bonding: Fix reference count leak in bond_sysfs_slave_add.")
Cc: Qiushi Wu 
Cc: Jay Vosburgh 
Cc: Veaceslav Falico 
Cc: Andy Gospodarek 
Signed-off-by: Jamie Iles 
Reviewed-by: Greg Kroah-Hartman 
Link: https://lore.kernel.org/r/20201120142827.879226-1-jamie@nuviainc.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net/ipv4: always honour route mtu during forwarding

2020-10-29T08:06:58+00:00

[ Upstream commit 02a1b175b0e92d9e0fa5df3957ade8d733ceb6a0 ]

Documentation/networking/ip-sysctl.txt:46 says:
  ip_forward_use_pmtu - BOOLEAN
    By default we don't trust protocol path MTUs while forwarding
    because they could be easily forged and can lead to unwanted
    fragmentation by the router.
    You only need to enable this if you have user-space software
    which tries to discover path mtus by itself and depends on the
    kernel honoring this information. This is normally not the case.
    Default: 0 (disabled)
    Possible values:
    0 - disabled
    1 - enabled

Which makes it pretty clear that setting it to 1 is a potential
security/safety/DoS issue, and yet it is entirely reasonable to want
forwarded traffic to honour explicitly administrator configured
route mtus (instead of defaulting to device mtu).

Indeed, I can't think of a single reason why you wouldn't want to.
Since you configured a route mtu you probably know better...

It is pretty common to have a higher device mtu to allow receiving
large (jumbo) frames, while having some routes via that interface
(potentially including the default route to the internet) specify
a lower mtu.

Note that ipv6 forwarding uses device mtu unless the route is locked
(in which case it will use the route mtu).

This approach is not usable for IPv4 where an 'mtu lock' on a route
also has the side effect of disabling TCP path mtu discovery via
disabling the IPv4 DF (don't frag) bit on all outgoing frames.

I'm not aware of a way to lock a route from an IPv6 RA, so that also
potentially seems wrong.

Signed-off-by: Maciej Żenczykowski 
Cc: Eric Dumazet 
Cc: Willem de Bruijn 
Cc: Lorenzo Colitti 
Cc: Sunmeet Gill (Sunny) 
Cc: Vinay Paradkar 
Cc: Tyler Wear 
Cc: David Ahern 
Reviewed-by: Eric Dumazet 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Disconnect if E0 is used for Level 4

2020-10-17T08:29:54+00:00

commit 8746f135bb01872ff412d408ea1aa9ebd328c1f5 upstream.

E0 is not allowed with Level 4:

BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319:

  '128-bit equivalent strength for link and encryption keys
   required using FIPS approved algorithms (E0 not allowed,
   SAFER+ not allowed, and P-192 not allowed; encryption key
   not shortened'

SC enabled:

> HCI Event: Read Remote Extended Features (0x23) plen 13
        Status: Success (0x00)
        Handle: 256
        Page: 1/2
        Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          Secure Simple Pairing (Host Support)
          LE Supported (Host)
          Secure Connections (Host Support)
> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 256
        Encryption: Enabled with AES-CCM (0x02)

SC disabled:

> HCI Event: Read Remote Extended Features (0x23) plen 13
        Status: Success (0x00)
        Handle: 256
        Page: 1/2
        Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          Secure Simple Pairing (Host Support)
          LE Supported (Host)
> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 256
        Encryption: Enabled with E0 (0x01)
[May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used
< HCI Command: Disconnect (0x01|0x0006) plen 3
        Handle: 256
        Reason: Authentication Failure (0x05)

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Cc: Hans-Christian Noren Egtvedt 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix update of connection state in `hci_encrypt_cfm`

2020-10-17T08:29:54+00:00

commit 339ddaa626995bc6218972ca241471f3717cc5f4 upstream.

Starting with the upgrade to v5.8-rc3, I've noticed I wasn't able to
connect to my Bluetooth headset properly anymore. While connecting to
the device would eventually succeed, bluetoothd seemed to be confused
about the current connection state where the state was flapping hence
and forth. Bisecting this issue led to commit 3ca44c16b0dc (Bluetooth:
Consolidate encryption handling in hci_encrypt_cfm, 2020-05-19), which
refactored `hci_encrypt_cfm` to also handle updating the connection
state.

The commit in question changed the code to call `hci_connect_cfm` inside
`hci_encrypt_cfm` and to change the connection state. But with the
conversion, we now only update the connection state if a status was set
already. In fact, the reverse should be true: the status should be
updated if no status is yet set. So let's fix the isuse by reversing the
condition.

Fixes: 3ca44c16b0dc ("Bluetooth: Consolidate encryption handling in hci_encrypt_cfm")
Signed-off-by: Patrick Steinhardt 
Acked-by:  Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Consolidate encryption handling in hci_encrypt_cfm

2020-10-17T08:29:53+00:00

commit 3ca44c16b0dcc764b641ee4ac226909f5c421aa3 upstream.

This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection
state is BT_CONFIG so callers don't have to check the state.

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Cc: Hans-Christian Noren Egtvedt 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: L2CAP: Fix calling sk_filter on non-socket based channel

2020-10-17T08:29:53+00:00

commit f19425641cb2572a33cb074d5e30283720bd4d22 upstream.

Only sockets will have the chan->data set to an actual sk, channels
like A2MP would have its own data which would likely cause a crash when
calling sk_filter, in order to fix this a new callback has been
introduced so channels can implement their own filtering if necessary.

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

xfrm: clone XFRMA_REPLAY_ESN_VAL in xfrm_do_migrate

2020-10-14T07:51:12+00:00

[ Upstream commit 91a46c6d1b4fcbfa4773df9421b8ad3e58088101 ]

XFRMA_REPLAY_ESN_VAL was not cloned completely from the old to the new.
Migrate this attribute during XFRMA_MSG_MIGRATE

v1->v2:
 - move curleft cloning to a separate patch

Fixes: af2f464e326e ("xfrm: Assign esn pointers when cloning a state")
Signed-off-by: Antony Antony 
Signed-off-by: Steffen Klassert 
Signed-off-by: Sasha Levin

netfilter: nf_tables: fix destination register zeroing

2020-09-09T17:03:08+00:00

[ Upstream commit 1e105e6afa6c3d32bfb52c00ffa393894a525c27 ]

Following bug was reported via irc:
nft list ruleset
   set knock_candidates_ipv4 {
      type ipv4_addr . inet_service
      size 65535
      elements = { 127.0.0.1 . 123,
                   127.0.0.1 . 123 }
      }
 ..
   udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 }
   udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport }

It should not have been possible to add a duplicate set entry.

After some debugging it turned out that the problem is the immediate
value (123) in the second-to-last rule.

Concatenations use 32bit registers, i.e. the elements are 8 bytes each,
not 6 and it turns out the kernel inserted

inet firewall @knock_candidates_ipv4
        element 0100007f ffff7b00  : 0 [end]
        element 0100007f 00007b00  : 0 [end]

Note the non-zero upper bits of the first element.  It turns out that
nft_immediate doesn't zero the destination register, but this is needed
when the length isn't a multiple of 4.

Furthermore, the zeroing in nft_payload is broken.  We can't use
[len / 4] = 0 -- if len is a multiple of 4, index is off by one.

Skip zeroing in this case and use a conditional instead of (len -1) / 4.

Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing")
Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin