<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/include/net, branch v5.17.6</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>Bluetooth: hci_event: Fix checking for invalid handle on error status</title>
<updated>2022-05-09T07:16:24+00:00</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2022-04-22T19:58:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=a236fa3b5a6324659cb21f249a7227088ef460d9'/>
<id>a236fa3b5a6324659cb21f249a7227088ef460d9</id>
<content type='text'>
[ Upstream commit c86cc5a3ec70f5644f1fa21610b943d0441bc1f7 ]

Commit d5ebaa7c5f6f6 introduces checks for handle range
(e.g HCI_CONN_HANDLE_MAX) but controllers like Intel AX200 don't seem
to respect the valid range int case of error status:

&gt; HCI Event: Connect Complete (0x03) plen 11
        Status: Page Timeout (0x04)
        Handle: 65535
        Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&amp;
	Sound Products Inc)
        Link type: ACL (0x01)
        Encryption: Disabled (0x00)
[1644965.827560] Bluetooth: hci0: Ignoring HCI_Connection_Complete for invalid handle

Because of it is impossible to cleanup the connections properly since
the stack would attempt to cancel the connection which is no longer in
progress causing the following trace:

&lt; HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
        Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&amp;
	Sound Products Inc)
= bluetoothd: src/profile.c:record_cb() Unable to get Hands-Free Voice
	gateway SDP record: Connection timed out
&gt; HCI Event: Command Complete (0x0e) plen 10
      Create Connection Cancel (0x01|0x0008) ncmd 1
        Status: Unknown Connection Identifier (0x02)
        Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&amp;
	Sound Products Inc)
&lt; HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
        Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&amp;
	Sound Products Inc)

Fixes: d5ebaa7c5f6f6 ("Bluetooth: hci_event: Ignore multiple conn complete events")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit c86cc5a3ec70f5644f1fa21610b943d0441bc1f7 ]

Commit d5ebaa7c5f6f6 introduces checks for handle range
(e.g HCI_CONN_HANDLE_MAX) but controllers like Intel AX200 don't seem
to respect the valid range int case of error status:

&gt; HCI Event: Connect Complete (0x03) plen 11
        Status: Page Timeout (0x04)
        Handle: 65535
        Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&amp;
	Sound Products Inc)
        Link type: ACL (0x01)
        Encryption: Disabled (0x00)
[1644965.827560] Bluetooth: hci0: Ignoring HCI_Connection_Complete for invalid handle

Because of it is impossible to cleanup the connections properly since
the stack would attempt to cancel the connection which is no longer in
progress causing the following trace:

&lt; HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
        Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&amp;
	Sound Products Inc)
= bluetoothd: src/profile.c:record_cb() Unable to get Hands-Free Voice
	gateway SDP record: Connection timed out
&gt; HCI Event: Command Complete (0x0e) plen 10
      Create Connection Cancel (0x01|0x0008) ncmd 1
        Status: Unknown Connection Identifier (0x02)
        Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&amp;
	Sound Products Inc)
&lt; HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
        Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&amp;
	Sound Products Inc)

Fixes: d5ebaa7c5f6f6 ("Bluetooth: hci_event: Ignore multiple conn complete events")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tcp: make sure treq-&gt;af_specific is initialized</title>
<updated>2022-05-09T07:16:23+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2022-04-24T20:35:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=0dc770455611c56990e841f99be2d79446636c57'/>
<id>0dc770455611c56990e841f99be2d79446636c57</id>
<content type='text'>
[ Upstream commit ba5a4fdd63ae0c575707030db0b634b160baddd7 ]

syzbot complained about a recent change in TCP stack,
hitting a NULL pointer [1]

tcp request sockets have an af_specific pointer, which
was used before the blamed change only for SYNACK generation
in non SYNCOOKIE mode.

tcp requests sockets momentarily created when third packet
coming from client in SYNCOOKIE mode were not using
treq-&gt;af_specific.

Make sure this field is populated, in the same way normal
TCP requests sockets do in tcp_conn_request().

[1]
TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies.  Check SNMP counters.
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534
Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 &lt;80&gt; 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48
RSP: 0018:ffffc90000de0588 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100
RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008
RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0
R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 &lt;IRQ&gt;
 tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267
 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207
 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258
 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline]
 tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486
 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725
 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422
 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473
 dst_input include/net/dst.h:461 [inline]
 ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405
 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519
 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847
 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413
 napi_poll net/core/dev.c:6480 [inline]
 net_rx_action+0x8ec/0xc60 net/core/dev.c:6567
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558
 invoke_softirq kernel/softirq.c:432 [inline]
 __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097

Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Francesco Ruggeri &lt;fruggeri@arista.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit ba5a4fdd63ae0c575707030db0b634b160baddd7 ]

syzbot complained about a recent change in TCP stack,
hitting a NULL pointer [1]

tcp request sockets have an af_specific pointer, which
was used before the blamed change only for SYNACK generation
in non SYNCOOKIE mode.

tcp requests sockets momentarily created when third packet
coming from client in SYNCOOKIE mode were not using
treq-&gt;af_specific.

Make sure this field is populated, in the same way normal
TCP requests sockets do in tcp_conn_request().

[1]
TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies.  Check SNMP counters.
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534
Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 &lt;80&gt; 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48
RSP: 0018:ffffc90000de0588 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100
RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008
RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0
R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 &lt;IRQ&gt;
 tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267
 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207
 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258
 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline]
 tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486
 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725
 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422
 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473
 dst_input include/net/dst.h:461 [inline]
 ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405
 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519
 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847
 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413
 napi_poll net/core/dev.c:6480 [inline]
 net_rx_action+0x8ec/0xc60 net/core/dev.c:6567
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558
 invoke_softirq kernel/softirq.c:432 [inline]
 __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097

Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Francesco Ruggeri &lt;fruggeri@arista.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT</title>
<updated>2022-05-09T07:16:23+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2022-04-25T00:34:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=0373f2fb5baeae10b17a9473f781541b26b86386'/>
<id>0373f2fb5baeae10b17a9473f781541b26b86386</id>
<content type='text'>
[ Upstream commit 4bfe744ff1644fbc0a991a2677dc874475dd6776 ]

I had this bug sitting for too long in my pile, it is time to fix it.

Thanks to Doug Porter for reminding me of it!

We had various attempts in the past, including commit
0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"),
but the issue is that TCP stack currently only generates
EPOLLOUT from input path, when tp-&gt;snd_una has advanced
and skb(s) cleaned from rtx queue.

If a flow has a big RTT, and/or receives SACKs, it is possible
that the notsent part (tp-&gt;write_seq - tp-&gt;snd_nxt) reaches 0
and no more data can be sent until tp-&gt;snd_una finally advances.

What is needed is to also check if POLLOUT needs to be generated
whenever tp-&gt;snd_nxt is advanced, from output path.

This bug triggers more often after an idle period, as
we do not receive ACK for at least one RTT. tcp_notsent_lowat
could be a fraction of what CWND and pacing rate would allow to
send during this RTT.

In a followup patch, I will remove the bogus call
to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED)
from tcp_check_space(). Fact that we have decided to generate
an EPOLLOUT does not mean the application has immediately
refilled the transmit queue. This optimistic call
might have been the reason the bug seemed not too serious.

Tested:

200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2]

$ echo 500000 &gt;/proc/sys/net/ipv4/tcp_notsent_lowat
$ cat bench_rr.sh
SUM=0
for i in {1..10}
do
 V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"`
 echo $V
 SUM=$(($SUM + $V))
done
echo SUM=$SUM

Before patch:
$ bench_rr.sh
130000000
80000000
140000000
140000000
140000000
140000000
130000000
40000000
90000000
110000000
SUM=1140000000

After patch:
$ bench_rr.sh
430000000
590000000
530000000
450000000
450000000
350000000
450000000
490000000
480000000
460000000
SUM=4680000000  # This is 410 % of the value before patch.

Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reported-by: Doug Porter &lt;dsp@fb.com&gt;
Cc: Soheil Hassas Yeganeh &lt;soheil@google.com&gt;
Cc: Neal Cardwell &lt;ncardwell@google.com&gt;
Acked-by: Soheil Hassas Yeganeh &lt;soheil@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 4bfe744ff1644fbc0a991a2677dc874475dd6776 ]

I had this bug sitting for too long in my pile, it is time to fix it.

Thanks to Doug Porter for reminding me of it!

We had various attempts in the past, including commit
0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"),
but the issue is that TCP stack currently only generates
EPOLLOUT from input path, when tp-&gt;snd_una has advanced
and skb(s) cleaned from rtx queue.

If a flow has a big RTT, and/or receives SACKs, it is possible
that the notsent part (tp-&gt;write_seq - tp-&gt;snd_nxt) reaches 0
and no more data can be sent until tp-&gt;snd_una finally advances.

What is needed is to also check if POLLOUT needs to be generated
whenever tp-&gt;snd_nxt is advanced, from output path.

This bug triggers more often after an idle period, as
we do not receive ACK for at least one RTT. tcp_notsent_lowat
could be a fraction of what CWND and pacing rate would allow to
send during this RTT.

In a followup patch, I will remove the bogus call
to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED)
from tcp_check_space(). Fact that we have decided to generate
an EPOLLOUT does not mean the application has immediately
refilled the transmit queue. This optimistic call
might have been the reason the bug seemed not too serious.

Tested:

200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2]

$ echo 500000 &gt;/proc/sys/net/ipv4/tcp_notsent_lowat
$ cat bench_rr.sh
SUM=0
for i in {1..10}
do
 V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"`
 echo $V
 SUM=$(($SUM + $V))
done
echo SUM=$SUM

Before patch:
$ bench_rr.sh
130000000
80000000
140000000
140000000
140000000
140000000
130000000
40000000
90000000
110000000
SUM=1140000000

After patch:
$ bench_rr.sh
430000000
590000000
530000000
450000000
450000000
350000000
450000000
490000000
480000000
460000000
SUM=4680000000  # This is 410 % of the value before patch.

Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reported-by: Doug Porter &lt;dsp@fb.com&gt;
Cc: Soheil Hassas Yeganeh &lt;soheil@google.com&gt;
Cc: Neal Cardwell &lt;ncardwell@google.com&gt;
Acked-by: Soheil Hassas Yeganeh &lt;soheil@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode</title>
<updated>2022-05-09T07:16:23+00:00</updated>
<author>
<name>Peilin Ye</name>
<email>peilin.ye@bytedance.com</email>
</author>
<published>2022-04-21T22:09:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=d2b0c2f47f1c572d9b611606de0e8ca1719ada3f'/>
<id>d2b0c2f47f1c572d9b611606de0e8ca1719ada3f</id>
<content type='text'>
[ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ]

As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
collect_md mode is racy for [IP6]GRE[TAP] devices.  Consider the
following sequence of events:

1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
   add ... external".  "ip" ignores "[o]seq" if "external" is specified,
   so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
   it uses lockless TX);
2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
   bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
3. gre_fb_xmit() or __gre6_xmit() processes these skb's:

	gre_build_header(skb, tun_hlen,
			 flags, protocol,
			 tunnel_id_to_key32(tun_info-&gt;key.tun_id),
			 (flags &amp; TUNNEL_SEQ) ? htonl(tunnel-&gt;o_seqno++)
					      : 0);   ^^^^^^^^^^^^^^^^^

Since we are not using the TX lock (&amp;txq-&gt;_xmit_lock), multiple CPUs may
try to do this tunnel-&gt;o_seqno++ in parallel, which is racy.  Fix it by
making o_seqno atomic_t.

As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless
xmit"), making o_seqno atomic_t increases "chance for packets being out
of order at receiver" when NETIF_F_LLTX is on.

Maybe a better fix would be:

1. Do not ignore "oseq" in external mode.  Users MUST specify "oseq" if
   they want the kernel to allow sequencing of outgoing packets;
2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
   with "oseq".

Unfortunately, that would break userspace.

We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
do it in separate patches to keep this fix minimal.

Suggested-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.")
Signed-off-by: Peilin Ye &lt;peilin.ye@bytedance.com&gt;
Acked-by: William Tu &lt;u9012063@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ]

As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
collect_md mode is racy for [IP6]GRE[TAP] devices.  Consider the
following sequence of events:

1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
   add ... external".  "ip" ignores "[o]seq" if "external" is specified,
   so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
   it uses lockless TX);
2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
   bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
3. gre_fb_xmit() or __gre6_xmit() processes these skb's:

	gre_build_header(skb, tun_hlen,
			 flags, protocol,
			 tunnel_id_to_key32(tun_info-&gt;key.tun_id),
			 (flags &amp; TUNNEL_SEQ) ? htonl(tunnel-&gt;o_seqno++)
					      : 0);   ^^^^^^^^^^^^^^^^^

Since we are not using the TX lock (&amp;txq-&gt;_xmit_lock), multiple CPUs may
try to do this tunnel-&gt;o_seqno++ in parallel, which is racy.  Fix it by
making o_seqno atomic_t.

As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless
xmit"), making o_seqno atomic_t increases "chance for packets being out
of order at receiver" when NETIF_F_LLTX is on.

Maybe a better fix would be:

1. Do not ignore "oseq" in external mode.  Users MUST specify "oseq" if
   they want the kernel to allow sequencing of outgoing packets;
2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
   with "oseq".

Unfortunately, that would break userspace.

We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
do it in separate patches to keep this fix minimal.

Suggested-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.")
Signed-off-by: Peilin Ye &lt;peilin.ye@bytedance.com&gt;
Acked-by: William Tu &lt;u9012063@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tcp: ensure to use the most recently sent skb when filling the rate sample</title>
<updated>2022-05-09T07:16:21+00:00</updated>
<author>
<name>Pengcheng Yang</name>
<email>yangpc@wangsu.com</email>
</author>
<published>2022-04-20T02:34:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=227621b4aa372a6a6745b41fdcb9e81244b921f3'/>
<id>227621b4aa372a6a6745b41fdcb9e81244b921f3</id>
<content type='text'>
[ Upstream commit b253a0680ceadc5d7b4acca7aa2d870326cad8ad ]

If an ACK (s)acks multiple skbs, we favor the information
from the most recently sent skb by choosing the skb with
the highest prior_delivered count. But in the interval
between receiving ACKs, we send multiple skbs with the same
prior_delivered, because the tp-&gt;delivered only changes
when we receive an ACK.

We used RACK's solution, copying tcp_rack_sent_after() as
tcp_skb_sent_after() helper to determine "which packet was
sent last?". Later, we will use tcp_skb_sent_after() instead
in RACK.

Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Pengcheng Yang &lt;yangpc@wangsu.com&gt;
Cc: Paolo Abeni &lt;pabeni@redhat.com&gt;
Acked-by: Neal Cardwell &lt;ncardwell@google.com&gt;
Tested-by: Neal Cardwell &lt;ncardwell@google.com&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit b253a0680ceadc5d7b4acca7aa2d870326cad8ad ]

If an ACK (s)acks multiple skbs, we favor the information
from the most recently sent skb by choosing the skb with
the highest prior_delivered count. But in the interval
between receiving ACKs, we send multiple skbs with the same
prior_delivered, because the tp-&gt;delivered only changes
when we receive an ACK.

We used RACK's solution, copying tcp_rack_sent_after() as
tcp_skb_sent_after() helper to determine "which packet was
sent last?". Later, we will use tcp_skb_sent_after() instead
in RACK.

Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Pengcheng Yang &lt;yangpc@wangsu.com&gt;
Cc: Paolo Abeni &lt;pabeni@redhat.com&gt;
Acked-by: Neal Cardwell &lt;ncardwell@google.com&gt;
Tested-by: Neal Cardwell &lt;ncardwell@google.com&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipv6: make ip6_rt_gc_expire an atomic_t</title>
<updated>2022-04-27T12:41:01+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2022-04-13T18:13:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=cd69bf3377def528a2c05cbbff09ce9b79a6c3fb'/>
<id>cd69bf3377def528a2c05cbbff09ce9b79a6c3fb</id>
<content type='text'>
[ Upstream commit 9cb7c013420f98fa6fd12fc6a5dc055170c108db ]

Reads and Writes to ip6_rt_gc_expire always have been racy,
as syzbot reported lately [1]

There is a possible risk of under-flow, leading
to unexpected high value passed to fib6_run_gc(),
although I have not observed this in the field.

Hosts hitting ip6_dst_gc() very hard are under pretty bad
state anyway.

[1]
BUG: KCSAN: data-race in ip6_dst_gc / ip6_dst_gc

read-write to 0xffff888102110744 of 4 bytes by task 13165 on cpu 1:
 ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
 dst_alloc+0x9b/0x160 net/core/dst.c:86
 ip6_dst_alloc net/ipv6/route.c:344 [inline]
 icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
 mld_send_cr net/ipv6/mcast.c:2119 [inline]
 mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
 worker_thread+0x618/0xa70 kernel/workqueue.c:2436
 kthread+0x1a9/0x1e0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30

read-write to 0xffff888102110744 of 4 bytes by task 11607 on cpu 0:
 ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
 dst_alloc+0x9b/0x160 net/core/dst.c:86
 ip6_dst_alloc net/ipv6/route.c:344 [inline]
 icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
 mld_send_cr net/ipv6/mcast.c:2119 [inline]
 mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
 worker_thread+0x618/0xa70 kernel/workqueue.c:2436
 kthread+0x1a9/0x1e0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30

value changed: 0x00000bb3 -&gt; 0x00000ba9

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 11607 Comm: kworker/0:21 Not tainted 5.18.0-rc1-syzkaller-00037-g42e7a03d3bad-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: mld mld_ifc_work

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reported-by: syzbot &lt;syzkaller@googlegroups.com&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Link: https://lore.kernel.org/r/20220413181333.649424-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 9cb7c013420f98fa6fd12fc6a5dc055170c108db ]

Reads and Writes to ip6_rt_gc_expire always have been racy,
as syzbot reported lately [1]

There is a possible risk of under-flow, leading
to unexpected high value passed to fib6_run_gc(),
although I have not observed this in the field.

Hosts hitting ip6_dst_gc() very hard are under pretty bad
state anyway.

[1]
BUG: KCSAN: data-race in ip6_dst_gc / ip6_dst_gc

read-write to 0xffff888102110744 of 4 bytes by task 13165 on cpu 1:
 ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
 dst_alloc+0x9b/0x160 net/core/dst.c:86
 ip6_dst_alloc net/ipv6/route.c:344 [inline]
 icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
 mld_send_cr net/ipv6/mcast.c:2119 [inline]
 mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
 worker_thread+0x618/0xa70 kernel/workqueue.c:2436
 kthread+0x1a9/0x1e0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30

read-write to 0xffff888102110744 of 4 bytes by task 11607 on cpu 0:
 ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
 dst_alloc+0x9b/0x160 net/core/dst.c:86
 ip6_dst_alloc net/ipv6/route.c:344 [inline]
 icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
 mld_send_cr net/ipv6/mcast.c:2119 [inline]
 mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
 worker_thread+0x618/0xa70 kernel/workqueue.c:2436
 kthread+0x1a9/0x1e0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30

value changed: 0x00000bb3 -&gt; 0x00000ba9

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 11607 Comm: kworker/0:21 Not tainted 5.18.0-rc1-syzkaller-00037-g42e7a03d3bad-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: mld mld_ifc_work

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reported-by: syzbot &lt;syzkaller@googlegroups.com&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Link: https://lore.kernel.org/r/20220413181333.649424-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>esp: limit skb_page_frag_refill use to a single page</title>
<updated>2022-04-27T12:40:58+00:00</updated>
<author>
<name>Sabrina Dubroca</name>
<email>sd@queasysnail.net</email>
</author>
<published>2022-04-13T08:10:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=b657030870bb5351c5b1e84d4e9f186da6ca0496'/>
<id>b657030870bb5351c5b1e84d4e9f186da6ca0496</id>
<content type='text'>
[ Upstream commit 5bd8baab087dff657e05387aee802e70304cc813 ]

Commit ebe48d368e97 ("esp: Fix possible buffer overflow in ESP
transformation") tried to fix skb_page_frag_refill usage in ESP by
capping allocsize to 32k, but that doesn't completely solve the issue,
as skb_page_frag_refill may return a single page. If that happens, we
will write out of bounds, despite the check introduced in the previous
patch.

This patch forces COW in cases where we would end up calling
skb_page_frag_refill with a size larger than a page (first in
esp_output_head with tailen, then in esp_output_tail with
skb-&gt;data_len).

Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Sabrina Dubroca &lt;sd@queasysnail.net&gt;
Signed-off-by: Steffen Klassert &lt;steffen.klassert@secunet.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 5bd8baab087dff657e05387aee802e70304cc813 ]

Commit ebe48d368e97 ("esp: Fix possible buffer overflow in ESP
transformation") tried to fix skb_page_frag_refill usage in ESP by
capping allocsize to 32k, but that doesn't completely solve the issue,
as skb_page_frag_refill may return a single page. If that happens, we
will write out of bounds, despite the check introduced in the previous
patch.

This patch forces COW in cases where we would end up calling
skb_page_frag_refill with a size larger than a page (first in
esp_output_head with tailen, then in esp_output_tail with
skb-&gt;data_len).

Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Sabrina Dubroca &lt;sd@queasysnail.net&gt;
Signed-off-by: Steffen Klassert &lt;steffen.klassert@secunet.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net/sched: flower: fix parsing of ethertype following VLAN header</title>
<updated>2022-04-20T07:36:12+00:00</updated>
<author>
<name>Vlad Buslov</name>
<email>vladbu@nvidia.com</email>
</author>
<published>2022-04-06T11:22:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=52a34db0116bc74d5533f6b3b4460ef08dcf0c28'/>
<id>52a34db0116bc74d5533f6b3b4460ef08dcf0c28</id>
<content type='text'>
[ Upstream commit 2105f700b53c24aa48b65c15652acc386044d26a ]

A tc flower filter matching TCA_FLOWER_KEY_VLAN_ETH_TYPE is expected to
match the L2 ethertype following the first VLAN header, as confirmed by
linked discussion with the maintainer. However, such rule also matches
packets that have additional second VLAN header, even though filter has
both eth_type and vlan_ethtype set to "ipv4". Looking at the code this
seems to be mostly an artifact of the way flower uses flow dissector.
First, even though looking at the uAPI eth_type and vlan_ethtype appear
like a distinct fields, in flower they are all mapped to the same
key-&gt;basic.n_proto. Second, flow dissector skips following VLAN header as
no keys for FLOW_DISSECTOR_KEY_CVLAN are set and eventually assigns the
value of n_proto to last parsed header. With these, such filters ignore any
headers present between first VLAN header and first "non magic"
header (ipv4 in this case) that doesn't result
FLOW_DISSECT_RET_PROTO_AGAIN.

Fix the issue by extending flow dissector VLAN key structure with new
'vlan_eth_type' field that matches first ethertype following previously
parsed VLAN header. Modify flower classifier to set the new
flow_dissector_key_vlan-&gt;vlan_eth_type with value obtained from
TCA_FLOWER_KEY_VLAN_ETH_TYPE/TCA_FLOWER_KEY_CVLAN_ETH_TYPE uAPIs.

Link: https://lore.kernel.org/all/Yjhgi48BpTGh6dig@nanopsycho/
Fixes: 9399ae9a6cb2 ("net_sched: flower: Add vlan support")
Fixes: d64efd0926ba ("net/sched: flower: Add supprt for matching on QinQ vlan headers")
Signed-off-by: Vlad Buslov &lt;vladbu@nvidia.com&gt;
Reviewed-by: Jiri Pirko &lt;jiri@nvidia.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 2105f700b53c24aa48b65c15652acc386044d26a ]

A tc flower filter matching TCA_FLOWER_KEY_VLAN_ETH_TYPE is expected to
match the L2 ethertype following the first VLAN header, as confirmed by
linked discussion with the maintainer. However, such rule also matches
packets that have additional second VLAN header, even though filter has
both eth_type and vlan_ethtype set to "ipv4". Looking at the code this
seems to be mostly an artifact of the way flower uses flow dissector.
First, even though looking at the uAPI eth_type and vlan_ethtype appear
like a distinct fields, in flower they are all mapped to the same
key-&gt;basic.n_proto. Second, flow dissector skips following VLAN header as
no keys for FLOW_DISSECTOR_KEY_CVLAN are set and eventually assigns the
value of n_proto to last parsed header. With these, such filters ignore any
headers present between first VLAN header and first "non magic"
header (ipv4 in this case) that doesn't result
FLOW_DISSECT_RET_PROTO_AGAIN.

Fix the issue by extending flow dissector VLAN key structure with new
'vlan_eth_type' field that matches first ethertype following previously
parsed VLAN header. Modify flower classifier to set the new
flow_dissector_key_vlan-&gt;vlan_eth_type with value obtained from
TCA_FLOWER_KEY_VLAN_ETH_TYPE/TCA_FLOWER_KEY_CVLAN_ETH_TYPE uAPIs.

Link: https://lore.kernel.org/all/Yjhgi48BpTGh6dig@nanopsycho/
Fixes: 9399ae9a6cb2 ("net_sched: flower: Add vlan support")
Fixes: d64efd0926ba ("net/sched: flower: Add supprt for matching on QinQ vlan headers")
Signed-off-by: Vlad Buslov &lt;vladbu@nvidia.com&gt;
Reviewed-by: Jiri Pirko &lt;jiri@nvidia.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mctp: Use output netdev to allocate skb headroom</title>
<updated>2022-04-13T17:27:29+00:00</updated>
<author>
<name>Matt Johnston</name>
<email>matt@codeconstruct.com.au</email>
</author>
<published>2022-04-01T02:48:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=0ebe7ca9e2d885699b4f2f65ef9fe2863464616c'/>
<id>0ebe7ca9e2d885699b4f2f65ef9fe2863464616c</id>
<content type='text'>
[ Upstream commit 4a9dda1c1da65beee994f0977a56a9a21c5db2a7 ]

Previously the skb was allocated with headroom MCTP_HEADER_MAXLEN,
but that isn't sufficient if we are using devs that are not MCTP
specific.

This also adds a check that the smctp_halen provided to sendmsg for
extended addressing is the correct size for the netdev.

Fixes: 833ef3b91de6 ("mctp: Populate socket implementation")
Reported-by: Matthew Rinaldi &lt;mjrinal@g.clemson.edu&gt;
Signed-off-by: Matt Johnston &lt;matt@codeconstruct.com.au&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 4a9dda1c1da65beee994f0977a56a9a21c5db2a7 ]

Previously the skb was allocated with headroom MCTP_HEADER_MAXLEN,
but that isn't sufficient if we are using devs that are not MCTP
specific.

This also adds a check that the smctp_halen provided to sendmsg for
extended addressing is the correct size for the netdev.

Fixes: 833ef3b91de6 ("mctp: Populate socket implementation")
Reported-by: Matthew Rinaldi &lt;mjrinal@g.clemson.edu&gt;
Signed-off-by: Matt Johnston &lt;matt@codeconstruct.com.au&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: Fix not checking for valid hdev on bt_dev_{info,warn,err,dbg}</title>
<updated>2022-04-13T17:27:19+00:00</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2022-03-03T21:11:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=d7b7f52325c350b7e4a0e7fe46dd39ba1c408359'/>
<id>d7b7f52325c350b7e4a0e7fe46dd39ba1c408359</id>
<content type='text'>
[ Upstream commit 9b392e0e0b6d026da5a62bb79a08f32e27af858e ]

This fixes attemting to print hdev-&gt;name directly which causes them to
print an error:

kernel: read_version:367: (efault): sock 000000006a3008f2

Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 9b392e0e0b6d026da5a62bb79a08f32e27af858e ]

This fixes attemting to print hdev-&gt;name directly which causes them to
print an error:

kernel: read_version:367: (efault): sock 000000006a3008f2

Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
