linux.git/include/net, branch v5.4.160 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git net, neigh: Enable state migration between NUD_PERMANENT and NTF_USE 2021-11-17T08:48:49+00:00 Daniel Borkmann daniel@iogearbox.net 2021-10-11T12:12:36+00:00 aba12bb38b10039917bc23ae487bd7a4e76a7015 [ Upstream commit 3dc20f4762c62d3b3f0940644881ed818aa7b2f5 ] Currently, it is not possible to migrate a neighbor entry between NUD_PERMANENT state and NTF_USE flag with a dynamic NUD state from a user space control plane. Similarly, it is not possible to add/remove NTF_EXT_LEARNED flag from an existing neighbor entry in combination with NTF_USE flag. This is due to the latter directly calling into neigh_event_send() without any meta data updates as happening in __neigh_update(). Thus, to enable this use case, extend the latter with a NEIGH_UPDATE_F_USE flag where we break the NUD_PERMANENT state in particular so that a latter neigh_event_send() is able to re-resolve a neighbor entry. Before fix, NUD_PERMANENT -> NUD_* & NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] As can be seen, despite the admin-triggered replace, the entry remains in the NUD_PERMANENT state. After fix, NUD_PERMANENT -> NUD_* & NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE [...] # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn STALE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] After the fix, the admin-triggered replace switches to a dynamic state from the NTF_USE flag which triggered a new neighbor resolution. Likewise, we can transition back from there, if needed, into NUD_PERMANENT. Similar before/after behavior can be observed for below transitions: Before fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] After fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [..] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3dc20f4762c62d3b3f0940644881ed818aa7b2f5 ]

Currently, it is not possible to migrate a neighbor entry between NUD_PERMANENT
state and NTF_USE flag with a dynamic NUD state from a user space control plane.
Similarly, it is not possible to add/remove NTF_EXT_LEARNED flag from an existing
neighbor entry in combination with NTF_USE flag.

This is due to the latter directly calling into neigh_event_send() without any
meta data updates as happening in __neigh_update(). Thus, to enable this use
case, extend the latter with a NEIGH_UPDATE_F_USE flag where we break the
NUD_PERMANENT state in particular so that a latter neigh_event_send() is able
to re-resolve a neighbor entry.

Before fix, NUD_PERMANENT -> NUD_* & NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]

As can be seen, despite the admin-triggered replace, the entry remains in the
NUD_PERMANENT state.

After fix, NUD_PERMANENT -> NUD_* & NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
  [...]
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn STALE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]

After the fix, the admin-triggered replace switches to a dynamic state from
the NTF_USE flag which triggered a new neighbor resolution. Likewise, we can
transition back from there, if needed, into NUD_PERMANENT.

Similar before/after behavior can be observed for below transitions:

Before fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [...]

After fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [..]

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and colliding 2021-11-17T08:48:48+00:00 John Fastabend john.fastabend@gmail.com 2021-11-03T20:47:35+00:00 18f2809441ef979a0ecac7c938c50b09519c51fe [ Upstream commit e0dc3b93bd7bcff8c3813d1df43e0908499c7cf0 ] Strparser is reusing the qdisc_skb_cb struct to stash the skb message handling progress, e.g. offset and length of the skb. First this is poorly named and inherits a struct from qdisc that doesn't reflect the actual usage of cb[] at this layer. But, more importantly strparser is using the following to access its metadata. (struct _strp_msg *)((void *)skb->cb + offsetof(struct qdisc_skb_cb, data)) Where _strp_msg is defined as: struct _strp_msg { struct strp_msg strp; /* 0 8 */ int accum_len; /* 8 4 */ /* size: 12, cachelines: 1, members: 2 */ /* last cacheline: 12 bytes */ }; So we use 12 bytes of ->data[] in struct. However in BPF code running parser and verdict the user has read capabilities into the data[] array as well. Its not too problematic, but we should not be exposing internal state to BPF program. If its really needed then we can use the probe_read() APIs which allow reading kernel memory. And I don't believe cb[] layer poses any API breakage by moving this around because programs can't depend on cb[] across layers. In order to fix another issue with a ctx rewrite we need to stash a temp variable somewhere. To make this work cleanly this patch builds a cb struct for sk_skb types called sk_skb_cb struct. Then we can use this consistently in the strparser, sockmap space. Additionally we can start allowing ->cb[] write access after this. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-5-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e0dc3b93bd7bcff8c3813d1df43e0908499c7cf0 ]

Strparser is reusing the qdisc_skb_cb struct to stash the skb message handling
progress, e.g. offset and length of the skb. First this is poorly named and
inherits a struct from qdisc that doesn't reflect the actual usage of cb[] at
this layer.

But, more importantly strparser is using the following to access its metadata.

  (struct _strp_msg *)((void *)skb->cb + offsetof(struct qdisc_skb_cb, data))

Where _strp_msg is defined as:

  struct _strp_msg {
        struct strp_msg            strp;                 /*     0     8 */
        int                        accum_len;            /*     8     4 */

        /* size: 12, cachelines: 1, members: 2 */
        /* last cacheline: 12 bytes */
  };

So we use 12 bytes of ->data[] in struct. However in BPF code running parser
and verdict the user has read capabilities into the data[] array as well. Its
not too problematic, but we should not be exposing internal state to BPF
program. If its really needed then we can use the probe_read() APIs which allow
reading kernel memory. And I don't believe cb[] layer poses any API breakage by
moving this around because programs can't depend on cb[] across layers.

In order to fix another issue with a ctx rewrite we need to stash a temp
variable somewhere. To make this work cleanly this patch builds a cb struct
for sk_skb types called sk_skb_cb struct. Then we can use this consistently
in the strparser, sockmap space. Additionally we can start allowing ->cb[]
write access after this.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20211103204736.248403-5-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
llc: fix out-of-bound array index in llc_sk_dev_hash() 2021-11-17T08:48:47+00:00 Eric Dumazet edumazet@google.com 2021-11-05T21:42:14+00:00 c1d5f943bbc3d6f6a5c30716c9f4c2299748f497 [ Upstream commit 8ac9dfd58b138f7e82098a4e0a0d46858b12215b ] Both ifindex and LLC_SK_DEV_HASH_ENTRIES are signed. This means that (ifindex % LLC_SK_DEV_HASH_ENTRIES) is negative if @ifindex is negative. We could simply make LLC_SK_DEV_HASH_ENTRIES unsigned. In this patch I chose to use hash_32() to get more entropy from @ifindex, like llc_sk_laddr_hashfn(). UBSAN: array-index-out-of-bounds in ./include/net/llc.h:75:26 index -43 is out of range for type 'hlist_head [64]' CPU: 1 PID: 20999 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 llc_sk_dev_hash include/net/llc.h:75 [inline] llc_sap_add_socket+0x49c/0x520 net/llc/llc_conn.c:697 llc_ui_bind+0x680/0xd70 net/llc/af_llc.c:404 __sys_bind+0x1e9/0x250 net/socket.c:1693 __do_sys_bind net/socket.c:1704 [inline] __se_sys_bind net/socket.c:1702 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1702 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa503407ae9 Fixes: 6d2e3ea28446 ("llc: use a device based hash table to speed up multicast delivery") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8ac9dfd58b138f7e82098a4e0a0d46858b12215b ]

Both ifindex and LLC_SK_DEV_HASH_ENTRIES are signed.

This means that (ifindex % LLC_SK_DEV_HASH_ENTRIES) is negative
if @ifindex is negative.

We could simply make LLC_SK_DEV_HASH_ENTRIES unsigned.

In this patch I chose to use hash_32() to get more entropy
from @ifindex, like llc_sk_laddr_hashfn().

UBSAN: array-index-out-of-bounds in ./include/net/llc.h:75:26
index -43 is out of range for type 'hlist_head [64]'
CPU: 1 PID: 20999 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291
 llc_sk_dev_hash include/net/llc.h:75 [inline]
 llc_sap_add_socket+0x49c/0x520 net/llc/llc_conn.c:697
 llc_ui_bind+0x680/0xd70 net/llc/af_llc.c:404
 __sys_bind+0x1e9/0x250 net/socket.c:1693
 __do_sys_bind net/socket.c:1704 [inline]
 __se_sys_bind net/socket.c:1702 [inline]
 __x64_sys_bind+0x6f/0xb0 net/socket.c:1702
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fa503407ae9

Fixes: 6d2e3ea28446 ("llc: use a device based hash table to speed up multicast delivery")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: annotate data-race in neigh_output() 2021-11-17T08:48:32+00:00 Eric Dumazet edumazet@google.com 2021-10-25T18:15:55+00:00 aba1db41dde7d6cd0ced1eb5c2a934af982a753f [ Upstream commit d18785e213866935b4c3dc0c33c3e18801ce0ce8 ] neigh_output() reads n->nud_state and hh->hh_len locklessly. This is fine, but we need to add annotations and document this. We evaluate skip_cache first to avoid reading these fields if the cache has to by bypassed. syzbot report: BUG: KCSAN: data-race in __neigh_event_send / ip_finish_output2 write to 0xffff88810798a885 of 1 bytes by interrupt on cpu 1: __neigh_event_send+0x40d/0xac0 net/core/neighbour.c:1128 neigh_event_send include/net/neighbour.h:444 [inline] neigh_resolve_output+0x104/0x410 net/core/neighbour.c:1476 neigh_output include/net/neighbour.h:510 [inline] ip_finish_output2+0x80a/0xaa0 net/ipv4/ip_output.c:221 ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423 dst_output include/net/dst.h:450 [inline] ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126 __ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525 ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539 __tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405 tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline] tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline] tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064 tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079 tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline] tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626 tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642 call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421 expire_timers+0x135/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x430 kernel/time/timer.c:1734 run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747 __do_softirq+0x12c/0x26e kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline] arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline] acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline] acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline] acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688 cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237 cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351 call_cpuidle kernel/sched/idle.c:158 [inline] cpuidle_idle_call kernel/sched/idle.c:239 [inline] do_idle+0x1a3/0x250 kernel/sched/idle.c:306 cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403 secondary_startup_64_no_verify+0xb1/0xbb read to 0xffff88810798a885 of 1 bytes by interrupt on cpu 0: neigh_output include/net/neighbour.h:507 [inline] ip_finish_output2+0x79a/0xaa0 net/ipv4/ip_output.c:221 ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423 dst_output include/net/dst.h:450 [inline] ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126 __ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525 ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539 __tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405 tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline] tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline] tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064 tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079 tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline] tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626 tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642 call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421 expire_timers+0x135/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x430 kernel/time/timer.c:1734 run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747 __do_softirq+0x12c/0x26e kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline] arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline] acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline] acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline] acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688 cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237 cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351 call_cpuidle kernel/sched/idle.c:158 [inline] cpuidle_idle_call kernel/sched/idle.c:239 [inline] do_idle+0x1a3/0x250 kernel/sched/idle.c:306 cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403 rest_init+0xee/0x100 init/main.c:734 arch_call_rest_init+0xa/0xb start_kernel+0x5e4/0x669 init/main.c:1142 secondary_startup_64_no_verify+0xb1/0xbb value changed: 0x20 -> 0x01 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d18785e213866935b4c3dc0c33c3e18801ce0ce8 ]

neigh_output() reads n->nud_state and hh->hh_len locklessly.

This is fine, but we need to add annotations and document this.

We evaluate skip_cache first to avoid reading these fields
if the cache has to by bypassed.

syzbot report:

BUG: KCSAN: data-race in __neigh_event_send / ip_finish_output2

write to 0xffff88810798a885 of 1 bytes by interrupt on cpu 1:
 __neigh_event_send+0x40d/0xac0 net/core/neighbour.c:1128
 neigh_event_send include/net/neighbour.h:444 [inline]
 neigh_resolve_output+0x104/0x410 net/core/neighbour.c:1476
 neigh_output include/net/neighbour.h:510 [inline]
 ip_finish_output2+0x80a/0xaa0 net/ipv4/ip_output.c:221
 ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423
 dst_output include/net/dst.h:450 [inline]
 ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126
 __ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525
 ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539
 __tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405
 tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
 tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline]
 tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064
 tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079
 tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline]
 tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626
 tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642
 call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421
 expire_timers+0x135/0x240 kernel/time/timer.c:1466
 __run_timers+0x368/0x430 kernel/time/timer.c:1734
 run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747
 __do_softirq+0x12c/0x26e kernel/softirq.c:558
 invoke_softirq kernel/softirq.c:432 [inline]
 __irq_exit_rcu kernel/softirq.c:636 [inline]
 irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648
 sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097
 asm_sysvec_apic_timer_interrupt+0x12/0x20
 native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline]
 arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline]
 acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline]
 acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline]
 acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688
 cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237
 cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351
 call_cpuidle kernel/sched/idle.c:158 [inline]
 cpuidle_idle_call kernel/sched/idle.c:239 [inline]
 do_idle+0x1a3/0x250 kernel/sched/idle.c:306
 cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403
 secondary_startup_64_no_verify+0xb1/0xbb

read to 0xffff88810798a885 of 1 bytes by interrupt on cpu 0:
 neigh_output include/net/neighbour.h:507 [inline]
 ip_finish_output2+0x79a/0xaa0 net/ipv4/ip_output.c:221
 ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423
 dst_output include/net/dst.h:450 [inline]
 ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126
 __ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525
 ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539
 __tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405
 tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
 tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline]
 tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064
 tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079
 tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline]
 tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626
 tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642
 call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421
 expire_timers+0x135/0x240 kernel/time/timer.c:1466
 __run_timers+0x368/0x430 kernel/time/timer.c:1734
 run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747
 __do_softirq+0x12c/0x26e kernel/softirq.c:558
 invoke_softirq kernel/softirq.c:432 [inline]
 __irq_exit_rcu kernel/softirq.c:636 [inline]
 irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648
 sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097
 asm_sysvec_apic_timer_interrupt+0x12/0x20
 native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline]
 arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline]
 acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline]
 acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline]
 acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688
 cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237
 cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351
 call_cpuidle kernel/sched/idle.c:158 [inline]
 cpuidle_idle_call kernel/sched/idle.c:239 [inline]
 do_idle+0x1a3/0x250 kernel/sched/idle.c:306
 cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403
 rest_init+0xee/0x100 init/main.c:734
 arch_call_rest_init+0xa/0xb
 start_kernel+0x5e4/0x669 init/main.c:1142
 secondary_startup_64_no_verify+0xb1/0xbb

value changed: 0x20 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: sched: update default qdisc visibility after Tx queue cnt changes 2021-11-17T08:48:28+00:00 Jakub Kicinski kuba@kernel.org 2021-09-13T22:53:30+00:00 31df731c8705abf12ab393925063ae3fd9bac0d5 [ Upstream commit 1e080f17750d1083e8a32f7b350584ae1cd7ff20 ] mq / mqprio make the default child qdiscs visible. They only do so for the qdiscs which are within real_num_tx_queues when the device is registered. Depending on order of calls in the driver, or if user space changes config via ethtool -L the number of qdiscs visible under tc qdisc show will differ from the number of queues. This is confusing to users and potentially to system configuration scripts which try to make sure qdiscs have the right parameters. Add a new Qdisc_ops callback and make relevant qdiscs TTRT. Note that this uncovers the "shortcut" created by commit 1f27cde313d7 ("net: sched: use pfifo_fast for non real queues") The default child qdiscs beyond initial real_num_tx are always pfifo_fast, no matter what the sysfs setting is. Fixing this gets a little tricky because we'd need to keep a reference on whatever the default qdisc was at the time of creation. In practice this is likely an non-issue the qdiscs likely have to be configured to non-default settings, so whatever user space is doing such configuration can replace the pfifos... now that it will see them. Reported-by: Matthew Massey <matthewmassey@fb.com> Reviewed-by: Dave Taht <dave.taht@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1e080f17750d1083e8a32f7b350584ae1cd7ff20 ]

mq / mqprio make the default child qdiscs visible. They only do
so for the qdiscs which are within real_num_tx_queues when the
device is registered. Depending on order of calls in the driver,
or if user space changes config via ethtool -L the number of
qdiscs visible under tc qdisc show will differ from the number
of queues. This is confusing to users and potentially to system
configuration scripts which try to make sure qdiscs have the
right parameters.

Add a new Qdisc_ops callback and make relevant qdiscs TTRT.

Note that this uncovers the "shortcut" created by
commit 1f27cde313d7 ("net: sched: use pfifo_fast for non real queues")
The default child qdiscs beyond initial real_num_tx are always
pfifo_fast, no matter what the sysfs setting is. Fixing this
gets a little tricky because we'd need to keep a reference
on whatever the default qdisc was at the time of creation.
In practice this is likely an non-issue the qdiscs likely have
to be configured to non-default settings, so whatever user space
is doing such configuration can replace the pfifos... now that
it will see them.

Reported-by: Matthew Massey <matthewmassey@fb.com>
Reviewed-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: multicast: calculate csum of looped-back and forwarded packets 2021-11-17T08:48:21+00:00 Cyril Strejc cyril.strejc@skoda.cz 2021-10-24T20:14:25+00:00 5ffdddcf28a12a95b18d6021c70ab4bda6704dd9 [ Upstream commit 9122a70a6333705c0c35614ddc51c274ed1d3637 ] During a testing of an user-space application which transmits UDP multicast datagrams and utilizes multicast routing to send the UDP datagrams out of defined network interfaces, I've found a multicast router does not fill-in UDP checksum into locally produced, looped-back and forwarded UDP datagrams, if an original output NIC the datagrams are sent to has UDP TX checksum offload enabled. The datagrams are sent malformed out of the NIC the datagrams have been forwarded to. It is because: 1. If TX checksum offload is enabled on the output NIC, UDP checksum is not calculated by kernel and is not filled into skb data. 2. dev_loopback_xmit(), which is called solely by ip_mc_finish_output(), sets skb->ip_summed = CHECKSUM_UNNECESSARY unconditionally. 3. Since 35fc92a9 ("[NET]: Allow forwarding of ip_summed except CHECKSUM_COMPLETE"), the ip_summed value is preserved during forwarding. 4. If ip_summed != CHECKSUM_PARTIAL, checksum is not calculated during a packet egress. The minimum fix in dev_loopback_xmit(): 1. Preserves skb->ip_summed CHECKSUM_PARTIAL. This is the case when the original output NIC has TX checksum offload enabled. The effects are: a) If the forwarding destination interface supports TX checksum offloading, the NIC driver is responsible to fill-in the checksum. b) If the forwarding destination interface does NOT support TX checksum offloading, checksums are filled-in by kernel before skb is submitted to the NIC driver. c) For local delivery, checksum validation is skipped as in the case of CHECKSUM_UNNECESSARY, thanks to skb_csum_unnecessary(). 2. Translates ip_summed CHECKSUM_NONE to CHECKSUM_UNNECESSARY. It means, for CHECKSUM_NONE, the behavior is unmodified and is there to skip a looped-back packet local delivery checksum validation. Signed-off-by: Cyril Strejc <cyril.strejc@skoda.cz> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9122a70a6333705c0c35614ddc51c274ed1d3637 ]

During a testing of an user-space application which transmits UDP
multicast datagrams and utilizes multicast routing to send the UDP
datagrams out of defined network interfaces, I've found a multicast
router does not fill-in UDP checksum into locally produced, looped-back
and forwarded UDP datagrams, if an original output NIC the datagrams
are sent to has UDP TX checksum offload enabled.

The datagrams are sent malformed out of the NIC the datagrams have been
forwarded to.

It is because:

1. If TX checksum offload is enabled on the output NIC, UDP checksum
   is not calculated by kernel and is not filled into skb data.

2. dev_loopback_xmit(), which is called solely by
   ip_mc_finish_output(), sets skb->ip_summed = CHECKSUM_UNNECESSARY
   unconditionally.

3. Since 35fc92a9 ("[NET]: Allow forwarding of ip_summed except
   CHECKSUM_COMPLETE"), the ip_summed value is preserved during
   forwarding.

4. If ip_summed != CHECKSUM_PARTIAL, checksum is not calculated during
   a packet egress.

The minimum fix in dev_loopback_xmit():

1. Preserves skb->ip_summed CHECKSUM_PARTIAL. This is the
   case when the original output NIC has TX checksum offload enabled.
   The effects are:

     a) If the forwarding destination interface supports TX checksum
        offloading, the NIC driver is responsible to fill-in the
        checksum.

     b) If the forwarding destination interface does NOT support TX
        checksum offloading, checksums are filled-in by kernel before
        skb is submitted to the NIC driver.

     c) For local delivery, checksum validation is skipped as in the
        case of CHECKSUM_UNNECESSARY, thanks to skb_csum_unnecessary().

2. Translates ip_summed CHECKSUM_NONE to CHECKSUM_UNNECESSARY. It
   means, for CHECKSUM_NONE, the behavior is unmodified and is there
   to skip a looped-back packet local delivery checksum validation.

Signed-off-by: Cyril Strejc <cyril.strejc@skoda.cz>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net/tls: Fix flipped sign in tls_err_abort() calls 2021-11-02T18:46:12+00:00 Daniel Jordan daniel.m.jordan@oracle.com 2021-10-27T21:59:20+00:00 e0cfd5159f314d6b304d030363650b06a2299cbb commit da353fac65fede6b8b4cfe207f0d9408e3121105 upstream. sk->sk_err appears to expect a positive value, a convention that ktls doesn't always follow and that leads to memory corruption in other code. For instance, [kworker] tls_encrypt_done(..., err=<negative error from crypto request>) tls_err_abort(.., err) sk->sk_err = err; [task] splice_from_pipe_feed ... tls_sw_do_sendpage if (sk->sk_err) { ret = -sk->sk_err; // ret is positive splice_from_pipe_feed (continued) ret = actor(...) // ret is still positive and interpreted as bytes // written, resulting in underflow of buf->len and // sd->len, leading to huge buf->offset and bogus // addresses computed in later calls to actor() Fix all tls_err_abort() callers to pass a negative error code consistently and centralize the error-prone sign flip there, throwing in a warning to catch future misuse and uninlining the function so it really does only warn once. Cc: stable@vger.kernel.org Fixes: c46234ebb4d1e ("tls: RX path for ktls") Reported-by: syzbot+b187b77c8474f9648fae@syzkaller.appspotmail.com Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit da353fac65fede6b8b4cfe207f0d9408e3121105 upstream.

sk->sk_err appears to expect a positive value, a convention that ktls
doesn't always follow and that leads to memory corruption in other code.
For instance,

    [kworker]
    tls_encrypt_done(..., err=<negative error from crypto request>)
      tls_err_abort(.., err)
        sk->sk_err = err;

    [task]
    splice_from_pipe_feed
      ...
        tls_sw_do_sendpage
          if (sk->sk_err) {
            ret = -sk->sk_err;  // ret is positive

    splice_from_pipe_feed (continued)
      ret = actor(...)  // ret is still positive and interpreted as bytes
                        // written, resulting in underflow of buf->len and
                        // sd->len, leading to huge buf->offset and bogus
                        // addresses computed in later calls to actor()

Fix all tls_err_abort() callers to pass a negative error code
consistently and centralize the error-prone sign flip there, throwing in
a warning to catch future misuse and uninlining the function so it
really does only warn once.

Cc: stable@vger.kernel.org
Fixes: c46234ebb4d1e ("tls: RX path for ktls")
Reported-by: syzbot+b187b77c8474f9648fae@syzkaller.appspotmail.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: prevent user from passing illegal stab size 2021-10-17T08:42:34+00:00 王贇 yun.wang@linux.alibaba.com 2021-09-24T02:35:58+00:00 2aaf3fd5e109b970370db52dbc1ae6f2b369d27a [ Upstream commit b193e15ac69d56f35e1d8e2b5d16cbd47764d053 ] We observed below report when playing with netlink sock: UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10 shift exponent 249 is too large for 32-bit type CPU: 0 PID: 685 Comm: a.out Not tainted Call Trace: dump_stack_lvl+0x8d/0xcf ubsan_epilogue+0xa/0x4e __ubsan_handle_shift_out_of_bounds+0x161/0x182 __qdisc_calculate_pkt_len+0xf0/0x190 __dev_queue_xmit+0x2ed/0x15b0 it seems like kernel won't check the stab log value passing from user, and will use the insane value later to calculate pkt_len. This patch just add a check on the size/cell_log to avoid insane calculation. Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b193e15ac69d56f35e1d8e2b5d16cbd47764d053 ]

We observed below report when playing with netlink sock:

  UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10
  shift exponent 249 is too large for 32-bit type
  CPU: 0 PID: 685 Comm: a.out Not tainted
  Call Trace:
   dump_stack_lvl+0x8d/0xcf
   ubsan_epilogue+0xa/0x4e
   __ubsan_handle_shift_out_of_bounds+0x161/0x182
   __qdisc_calculate_pkt_len+0xf0/0x190
   __dev_queue_xmit+0x2ed/0x15b0

it seems like kernel won't check the stab log value passing from
user, and will use the insane value later to calculate pkt_len.

This patch just add a check on the size/cell_log to avoid insane
calculation.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses 2021-10-06T13:42:35+00:00 Eric Dumazet edumazet@google.com 2021-09-29T22:57:50+00:00 0fcfaa8ed9d1dcbe377b202a1b3cdfd4e566114c [ Upstream commit 35306eb23814444bd4021f8a1c3047d3cb0c8b2b ] Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred. In order to fix this issue, this patch adds a new spinlock that needs to be used whenever these fields are read or written. Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently reading sk->sk_peer_pid which makes no sense, as this field is only possibly set by AF_UNIX sockets. We will have to clean this in a separate patch. This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback" or implementing what was truly expected. Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jann Horn <jannh@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 35306eb23814444bd4021f8a1c3047d3cb0c8b2b ]

Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations
are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred.

In order to fix this issue, this patch adds a new spinlock that needs
to be used whenever these fields are read or written.

Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently
reading sk->sk_peer_pid which makes no sense, as this field
is only possibly set by AF_UNIX sockets.
We will have to clean this in a separate patch.
This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback"
or implementing what was truly expected.

Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: ipv4: Fix rtnexthop len when RTA_FLOW is present 2021-10-06T13:42:33+00:00 Xiao Liang shaw.leon@gmail.com 2021-09-23T15:03:19+00:00 a2624e0934f0fe30770eb93955958c5f9f92af5a [ Upstream commit 597aa16c782496bf74c5dc3b45ff472ade6cee64 ] Multipath RTA_FLOW is embedded in nexthop. Dump it in fib_add_nexthop() to get the length of rtnexthop correct. Fixes: b0f60193632e ("ipv4: Refactor nexthop attributes in fib_dump_info") Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 597aa16c782496bf74c5dc3b45ff472ade6cee64 ]

Multipath RTA_FLOW is embedded in nexthop. Dump it in fib_add_nexthop()
to get the length of rtnexthop correct.

Fixes: b0f60193632e ("ipv4: Refactor nexthop attributes in fib_dump_info")
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>