linux.git/include/net, branch v5.4.168

net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info

2021-12-22T08:29:40+00:00

commit d086a1c65aabb5a4e1edc580ca583e2964c62b44 upstream.

The access of tcf_tunnel_info() produces the following splat, so fix it
by dereferencing the tcf_tunnel_key_params pointer with marker that
internal tcfa_liock is held.

 =============================
 WARNING: suspicious RCU usage
 5.9.0+ #1 Not tainted
 -----------------------------
 include/net/tc_act/tc_tunnel_key.h:59 suspicious rcu_dereference_protected() usage!
 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 1 lock held by tc/34839:
  #0: ffff88828572c2a0 (&p->tcfa_lock){+...}-{2:2}, at: tc_setup_flow_action+0xb3/0x48b5
 stack backtrace:
 CPU: 1 PID: 34839 Comm: tc Not tainted 5.9.0+ #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
 Call Trace:
  dump_stack+0x9a/0xd0
  tc_setup_flow_action+0x14cb/0x48b5
  fl_hw_replace_filter+0x347/0x690 [cls_flower]
  fl_change+0x2bad/0x4875 [cls_flower]
  tc_new_tfilter+0xf6f/0x1ba0
  rtnetlink_rcv_msg+0x5f2/0x870
  netlink_rcv_skb+0x124/0x350
  netlink_unicast+0x433/0x700
  netlink_sendmsg+0x6f1/0xbd0
  sock_sendmsg+0xb0/0xe0
  ____sys_sendmsg+0x4fa/0x6d0
  ___sys_sendmsg+0x12e/0x1b0
  __sys_sendmsg+0xa4/0x120
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f1f8cd4fe57
 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
 RSP: 002b:00007ffdc1e193b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1f8cd4fe57
 RDX: 0000000000000000 RSI: 00007ffdc1e19420 RDI: 0000000000000003
 RBP: 000000005f85aafa R08: 0000000000000001 R09: 00007ffdc1e1936c
 R10: 000000000040522d R11: 0000000000000246 R12: 0000000000000001
 R13: 0000000000000000 R14: 00007ffdc1e1d6f0 R15: 0000000000482420

Fixes: 3ebaf6da0716 ("net: sched: Do not assume RTNL is held in tunnel key action helpers")
Fixes: 7a47281439ba ("net: sched: lock action when translating it to flow_action infra")
Signed-off-by: Leon Romanovsky 
Acked-by: Cong Wang 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: sched: lock action when translating it to flow_action infra

2021-12-22T08:29:37+00:00

[ Upstream commit 7a47281439ba00b11fc098f36695522184ce5a82 ]

In order to remove dependency on rtnl lock, take action's tcfa_lock when
constructing its representation as flow_action_entry structure.

Refactor tcf_sample_get_group() to assume that caller holds tcf_lock and
don't take it manually. This callback is only called from flow_action infra
representation translator which now calls it with tcf_lock held, so this
refactoring is necessary to prevent deadlock.

Allocate memory with GFP_ATOMIC flag for ip_tunnel_info copy because
tcf_tunnel_info_copy() is only called from flow_action representation infra
code with tcf_lock spinlock taken.

Signed-off-by: Vlad Buslov 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bonding: make tx_rebalance_counter an atomic

2021-12-14T13:49:00+00:00

commit dac8e00fb640e9569cdeefd3ce8a75639e5d0711 upstream.

KCSAN reported a data-race [1] around tx_rebalance_counter
which can be accessed from different contexts, without
the protection of a lock/mutex.

[1]
BUG: KCSAN: data-race in bond_alb_init_slave / bond_alb_monitor

write to 0xffff888157e8ca24 of 4 bytes by task 7075 on cpu 0:
 bond_alb_init_slave+0x713/0x860 drivers/net/bonding/bond_alb.c:1613
 bond_enslave+0xd94/0x3010 drivers/net/bonding/bond_main.c:1949
 do_set_master net/core/rtnetlink.c:2521 [inline]
 __rtnl_newlink net/core/rtnetlink.c:3475 [inline]
 rtnl_newlink+0x1298/0x13b0 net/core/rtnetlink.c:3506
 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571
 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2491
 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x6e1/0x7d0 net/netlink/af_netlink.c:1916
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2409
 ___sys_sendmsg net/socket.c:2463 [inline]
 __sys_sendmsg+0x195/0x230 net/socket.c:2492
 __do_sys_sendmsg net/socket.c:2501 [inline]
 __se_sys_sendmsg net/socket.c:2499 [inline]
 __x64_sys_sendmsg+0x42/0x50 net/socket.c:2499
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888157e8ca24 of 4 bytes by task 1082 on cpu 1:
 bond_alb_monitor+0x8f/0xc00 drivers/net/bonding/bond_alb.c:1511
 process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
 worker_thread+0x616/0xa70 kernel/workqueue.c:2445
 kthread+0x2c7/0x2e0 kernel/kthread.c:327
 ret_from_fork+0x1f/0x30

value changed: 0x00000001 -> 0x00000064

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1082 Comm: kworker/u4:3 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: bond1 bond_alb_monitor

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet 
Reported-by: syzbot 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: fix memory leak in fib6_rule_suppress

2021-12-08T08:01:13+00:00

commit cdef485217d30382f3bf6448c54b4401648fe3f1 upstream.

The kernel leaks memory when a `fib` rule is present in IPv6 nftables
firewall rules and a suppress_prefix rule is present in the IPv6 routing
rules (used by certain tools such as wg-quick). In such scenarios, every
incoming packet will leak an allocation in `ip6_dst_cache` slab cache.

After some hours of `bpftrace`-ing and source code reading, I tracked
down the issue to ca7a03c41753 ("ipv6: do not free rt if
FIB_LOOKUP_NOREF is set on suppress rule").

The problem with that change is that the generic `args->flags` always have
`FIB_LOOKUP_NOREF` set[1][2] but the IPv6-specific flag
`RT6_LOOKUP_F_DST_NOREF` might not be, leading to `fib6_rule_suppress` not
decreasing the refcount when needed.

How to reproduce:
 - Add the following nftables rule to a prerouting chain:
     meta nfproto ipv6 fib saddr . mark . iif oif missing drop
   This can be done with:
     sudo nft create table inet test
     sudo nft create chain inet test test_chain '{ type filter hook prerouting priority filter + 10; policy accept; }'
     sudo nft add rule inet test test_chain meta nfproto ipv6 fib saddr . mark . iif oif missing drop
 - Run:
     sudo ip -6 rule add table main suppress_prefixlength 0
 - Watch `sudo slabtop -o | grep ip6_dst_cache` to see memory usage increase
   with every incoming ipv6 packet.

This patch exposes the protocol-specific flags to the protocol
specific `suppress` function, and check the protocol-specific `flags`
argument for RT6_LOOKUP_F_DST_NOREF instead of the generic
FIB_LOOKUP_NOREF when decreasing the refcount, like this.

[1]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L71
[2]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L99

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215105
Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: convert fib_num_tclassid_users to atomic_t

2021-12-08T08:01:12+00:00

commit 213f5f8f31f10aa1e83187ae20fb7fa4e626b724 upstream.

Before commit faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
changes to net->ipv4.fib_num_tclassid_users were protected by RTNL.

After the change, this is no longer the case, as free_fib_info_rcu()
runs after rcu grace period, without rtnl being held.

Fixes: faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
Signed-off-by: Eric Dumazet 
Cc: David Ahern 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

NFC: add NCI_UNREG flag to eliminate the race

2021-12-01T08:23:35+00:00

commit 48b71a9e66c2eab60564b1b1c85f4928ed04e406 upstream.

There are two sites that calls queue_work() after the
destroy_workqueue() and lead to possible UAF.

The first site is nci_send_cmd(), which can happen after the
nci_close_device as below

nfcmrvl_nci_unregister_dev   |  nfc_genl_dev_up
  nci_close_device           |
    flush_workqueue          |
    del_timer_sync           |
  nci_unregister_device      |    nfc_get_device
    destroy_workqueue        |    nfc_dev_up
    nfc_unregister_device    |      nci_dev_up
      device_del             |        nci_open_device
                             |          __nci_request
                             |            nci_send_cmd
                             |              queue_work !!!

Another site is nci_cmd_timer, awaked by the nci_cmd_work from the
nci_send_cmd.

  ...                        |  ...
  nci_unregister_device      |  queue_work
    destroy_workqueue        |
    nfc_unregister_device    |  ...
      device_del             |  nci_cmd_work
                             |  mod_timer
                             |  ...
                             |  nci_cmd_timer
                             |    queue_work !!!

For the above two UAF, the root cause is that the nfc_dev_up can race
between the nci_unregister_device routine. Therefore, this patch
introduce NCI_UNREG flag to easily eliminate the possible race. In
addition, the mutex_lock in nci_close_device can act as a barrier.

Signed-off-by: Lin Ma 
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reviewed-by: Jakub Kicinski 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20211116152732.19238-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: ipv6: add fib6_nh_release_dsts stub

2021-12-01T08:23:33+00:00

[ Upstream commit 8837cbbf854246f5f4d565f21e6baa945d37aded ]

We need a way to release a fib6_nh's per-cpu dsts when replacing
nexthops otherwise we can end up with stale per-cpu dsts which hold net
device references, so add a new IPv6 stub called fib6_nh_release_dsts.
It must be used after an RCU grace period, so no new dsts can be created
through a group's nexthop entry.
Similar to fib6_nh_release it shouldn't be used if fib6_nh_init has failed
so it doesn't need a dummy stub when IPv6 is not enabled.

Fixes: 7bf4796dd099 ("nexthops: add support for replace")
Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: ieee802154: handle iftypes as u32

2021-12-01T08:23:32+00:00

[ Upstream commit 451dc48c806a7ce9fbec5e7a24ccf4b2c936e834 ]

This patch fixes an issue that an u32 netlink value is handled as a
signed enum value which doesn't fit into the range of u32 netlink type.
If it's handled as -1 value some BIT() evaluation ends in a
shift-out-of-bounds issue. To solve the issue we set the to u32 max which
is s32 "-1" value to keep backwards compatibility and let the followed enum
values start counting at 0. This brings the compiler to never handle the
enum as signed and a check if the value is above NL802154_IFTYPE_MAX should
filter -1 out.

Fixes: f3ea5e44231a ("ieee802154: add new interface command")
Signed-off-by: Alexander Aring 
Link: https://lore.kernel.org/r/20211112030916.685793-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt 
Signed-off-by: Sasha Levin

net, neigh: Enable state migration between NUD_PERMANENT and NTF_USE

2021-11-17T08:48:49+00:00

[ Upstream commit 3dc20f4762c62d3b3f0940644881ed818aa7b2f5 ]

Currently, it is not possible to migrate a neighbor entry between NUD_PERMANENT
state and NTF_USE flag with a dynamic NUD state from a user space control plane.
Similarly, it is not possible to add/remove NTF_EXT_LEARNED flag from an existing
neighbor entry in combination with NTF_USE flag.

This is due to the latter directly calling into neigh_event_send() without any
meta data updates as happening in __neigh_update(). Thus, to enable this use
case, extend the latter with a NEIGH_UPDATE_F_USE flag where we break the
NUD_PERMANENT state in particular so that a latter neigh_event_send() is able
to re-resolve a neighbor entry.

Before fix, NUD_PERMANENT -> NUD_* & NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]

As can be seen, despite the admin-triggered replace, the entry remains in the
NUD_PERMANENT state.

After fix, NUD_PERMANENT -> NUD_* & NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
  [...]
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn STALE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]

After the fix, the admin-triggered replace switches to a dynamic state from
the NTF_USE flag which triggered a new neighbor resolution. Likewise, we can
transition back from there, if needed, into NUD_PERMANENT.

Similar before/after behavior can be observed for below transitions:

Before fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [...]

After fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [..]

Signed-off-by: Daniel Borkmann 
Acked-by: Roopa Prabhu 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and colliding

2021-11-17T08:48:48+00:00

[ Upstream commit e0dc3b93bd7bcff8c3813d1df43e0908499c7cf0 ]

Strparser is reusing the qdisc_skb_cb struct to stash the skb message handling
progress, e.g. offset and length of the skb. First this is poorly named and
inherits a struct from qdisc that doesn't reflect the actual usage of cb[] at
this layer.

But, more importantly strparser is using the following to access its metadata.

  (struct _strp_msg *)((void *)skb->cb + offsetof(struct qdisc_skb_cb, data))

Where _strp_msg is defined as:

  struct _strp_msg {
        struct strp_msg            strp;                 /*     0     8 */
        int                        accum_len;            /*     8     4 */

        /* size: 12, cachelines: 1, members: 2 */
        /* last cacheline: 12 bytes */
  };

So we use 12 bytes of ->data[] in struct. However in BPF code running parser
and verdict the user has read capabilities into the data[] array as well. Its
not too problematic, but we should not be exposing internal state to BPF
program. If its really needed then we can use the probe_read() APIs which allow
reading kernel memory. And I don't believe cb[] layer poses any API breakage by
moving this around because programs can't depend on cb[] across layers.

In order to fix another issue with a ctx rewrite we need to stash a temp
variable somewhere. To make this work cleanly this patch builds a cb struct
for sk_skb types called sk_skb_cb struct. Then we can use this consistently
in the strparser, sockmap space. Additionally we can start allowing ->cb[]
write access after this.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Tested-by: Jussi Maki 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/20211103204736.248403-5-john.fastabend@gmail.com
Signed-off-by: Sasha Levin