linux.git/include/net, branch v6.1.98

netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers

2024-07-05T07:31:47+00:00

[ Upstream commit 7931d32955e09d0a11b1fe0b6aac1bfa061c005c ]

register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.

Fixes: 96518518cc41 ("netfilter: add nftables")
Reported-by: Linus Torvalds 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

Fix race for duplicate reqsk on identical SYN

2024-07-05T07:31:46+00:00

[ Upstream commit ff46e3b4421923937b7f6e44ffcd3549a074f321 ]

When bonding is configured in BOND_MODE_BROADCAST mode, if two identical
SYN packets are received at the same time and processed on different CPUs,
it can potentially create the same sk (sock) but two different reqsk
(request_sock) in tcp_conn_request().

These two different reqsk will respond with two SYNACK packets, and since
the generation of the seq (ISN) incorporates a timestamp, the final two
SYNACK packets will have different seq values.

The consequence is that when the Client receives and replies with an ACK
to the earlier SYNACK packet, we will reset(RST) it.

========================================================================

This behavior is consistently reproducible in my local setup,
which comprises:

                  | NETA1 ------ NETB1 |
PC_A --- bond --- |                    | --- bond --- PC_B
                  | NETA2 ------ NETB2 |

- PC_A is the Server and has two network cards, NETA1 and NETA2. I have
  bonded these two cards using BOND_MODE_BROADCAST mode and configured
  them to be handled by different CPU.

- PC_B is the Client, also equipped with two network cards, NETB1 and
  NETB2, which are also bonded and configured in BOND_MODE_BROADCAST mode.

If the client attempts a TCP connection to the server, it might encounter
a failure. Capturing packets from the server side reveals:

10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855116,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855123, <==
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117, <==
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117,

Two SYNACKs with different seq numbers are sent by localhost,
resulting in an anomaly.

========================================================================

The attempted solution is as follows:
Add a return value to inet_csk_reqsk_queue_hash_add() to confirm if the
ehash insertion is successful (Up to now, the reason for unsuccessful
insertion is that a reqsk for the same connection has already been
inserted). If the insertion fails, release the reqsk.

Due to the refcnt, Kuniyuki suggests also adding a return value check
for the DCCP module; if ehash insertion fails, indicating a successful
insertion of the same connection, simply release the reqsk as well.

Simultaneously, In the reqsk_queue_hash_req(), the start of the
req->rsk_timer is adjusted to be after successful insertion.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: luoxuanqiang 
Reviewed-by: Kuniyuki Iwashima 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20240621013929.1386815-1-luoxuanqiang@kylinos.cn
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

netfilter: nf_tables: use timestamp to check for set element timeout

2024-07-05T07:31:44+00:00

commit 7395dfacfff65e9938ac0889dafa1ab01e987d15 upstream

Add a timestamp field at the beginning of the transaction, store it
in the nftables per-netns area.

Update set backend .insert, .deactivate and sync gc path to use the
timestamp, this avoids that an element expires while control plane
transaction is still unfinished.

.lookup and .update, which are used from packet path, still use the
current time to check if the element has expired. And .get path and dump
also since this runs lockless under rcu read size lock. Then, there is
async gc which also needs to check the current time since it runs
asynchronously from a workqueue.

Fixes: c3e1b005ed1c ("netfilter: nf_tables: add set element timeout support")
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

net/sched: fix false lockdep warning on qdisc root lock

2024-06-27T11:46:15+00:00

[ Upstream commit af0cb3fa3f9ed258d14abab0152e28a0f9593084 ]

Xiumei and Christoph reported the following lockdep splat, complaining of
the qdisc root lock being taken twice:

 ============================================
 WARNING: possible recursive locking detected
 6.7.0-rc3+ #598 Not tainted
 --------------------------------------------
 swapper/2/0 is trying to acquire lock:
 ffff888177190110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70

 but task is already holding lock:
 ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&sch->q.lock);
   lock(&sch->q.lock);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 5 locks held by swapper/2/0:
  #0: ffff888135a09d98 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x11a/0x510
  #1: ffffffffaaee5260 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x2c0/0x1ed0
  #2: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
  #3: ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
  #4: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70

 stack backtrace:
 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.7.0-rc3+ #598
 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
 Call Trace:
  
  dump_stack_lvl+0x4a/0x80
  __lock_acquire+0xfdd/0x3150
  lock_acquire+0x1ca/0x540
  _raw_spin_lock+0x34/0x80
  __dev_queue_xmit+0x1560/0x2e70
  tcf_mirred_act+0x82e/0x1260 [act_mirred]
  tcf_action_exec+0x161/0x480
  tcf_classify+0x689/0x1170
  prio_enqueue+0x316/0x660 [sch_prio]
  dev_qdisc_enqueue+0x46/0x220
  __dev_queue_xmit+0x1615/0x2e70
  ip_finish_output2+0x1218/0x1ed0
  __ip_finish_output+0x8b3/0x1350
  ip_output+0x163/0x4e0
  igmp_ifc_timer_expire+0x44b/0x930
  call_timer_fn+0x1a2/0x510
  run_timer_softirq+0x54d/0x11a0
  __do_softirq+0x1b3/0x88f
  irq_exit_rcu+0x18f/0x1e0
  sysvec_apic_timer_interrupt+0x6f/0x90
  

This happens when TC does a mirred egress redirect from the root qdisc of
device A to the root qdisc of device B. As long as these two locks aren't
protecting the same qdisc, they can be acquired in chain: add a per-qdisc
lockdep key to silence false warnings.
This dynamic key should safely replace the static key we have in sch_htb:
it was added to allow enqueueing to the device "direct qdisc" while still
holding the qdisc root lock.

v2: don't use static keys anymore in HTB direct qdiscs (thanks Eric Dumazet)

CC: Maxim Mikityanskiy 
CC: Xiumei Mu 
Reported-by: Christoph Paasch 
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/451
Signed-off-by: Davide Caratti 
Link: https://lore.kernel.org/r/7dc06d6158f72053cf877a82e2a7a5bd23692faa.1713448007.git.dcaratti@redhat.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ

2024-06-21T12:35:51+00:00

[ Upstream commit 806a5198c05987b748b50f3d0c0cfb3d417381a4 ]

This removes the bogus check for max > hcon->le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.

In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:

TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout

Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f95 ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

geneve: Fix incorrect inner network header offset when innerprotoinherit is set

2024-06-21T12:35:51+00:00

[ Upstream commit c6ae073f5903f6c6439d0ac855836a4da5c0a701 ]

When innerprotoinherit is set, the tunneled packets do not have an inner
Ethernet header.
Change 'maclen' to not always assume the header length is ETH_HLEN, as
there might not be a MAC header.

This resolves issues with drivers (e.g. mlx5, in
mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset
to be correct, and use it for TX offloads.

Fixes: d8a6213d70ac ("geneve: fix header validation in geneve[6]_xmit_skb")
Signed-off-by: Gal Pressman 
Signed-off-by: Tariq Toukan 
Reviewed-by: Wojciech Drewek 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: fix __dst_negative_advice() race

2024-06-16T11:41:40+00:00

commit 92f1655aa2b2294d0b49925f3b875a634bd3b59e upstream.

__dst_negative_advice() does not enforce proper RCU rules when
sk->dst_cache must be cleared, leading to possible UAF.

RCU rules are that we must first clear sk->sk_dst_cache,
then call dst_release(old_dst).

Note that sk_dst_reset(sk) is implementing this protocol correctly,
while __dst_negative_advice() uses the wrong order.

Given that ip6_negative_advice() has special logic
against RTF_CACHE, this means each of the three ->negative_advice()
existing methods must perform the sk_dst_reset() themselves.

Note the check against NULL dst is centralized in
__dst_negative_advice(), there is no need to duplicate
it in various callbacks.

Many thanks to Clement Lecigne for tracking this issue.

This old bug became visible after the blamed commit, using UDP sockets.

Fixes: a87cb3e48ee8 ("net: Facility to report route quality of connected sockets")
Reported-by: Clement Lecigne 
Diagnosed-by: Clement Lecigne 
Signed-off-by: Eric Dumazet 
Cc: Tom Herbert 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.com
Signed-off-by: Jakub Kicinski 
[Lee: Stable backport]
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

netfilter: nft_payload: move struct nft_payload_set definition where it belongs

2024-06-12T09:03:57+00:00

[ Upstream commit ac1f8c049319847b1b4c6b387fdb2e3f7fb84ffc ]

Not required to expose this header in nf_tables_core.h, move it to where
it is used, ie. nft_payload.

Signed-off-by: Pablo Neira Ayuso 
Stable-dep-of: 33c563ebf8d3 ("netfilter: nft_payload: skbuff vlan metadata mangle support")
Signed-off-by: Sasha Levin

inet: factor out locked section of inet_accept() in a new helper

2024-06-12T09:03:53+00:00

[ Upstream commit 711bdd5141d81ab21dbe0a533024d594210d5ba4 ]

No functional changes intended. The new helper will be used
by the MPTCP protocol in the next patch to avoid duplicating
a few LoC.

Signed-off-by: Paolo Abeni 
Reviewed-by: Matthieu Baerts 
Signed-off-by: Mat Martineau 
Signed-off-by: Jakub Kicinski 
Stable-dep-of: 26afda78cda3 ("net: relax socket state check at accept time.")
Signed-off-by: Sasha Levin

Bluetooth: compute LE flow credits based on recvbuf space

2024-06-12T09:03:20+00:00

[ Upstream commit ce60b9231b66710b6ee24042ded26efee120ecfc ]

Previously LE flow credits were returned to the
sender even if the socket's receive buffer was
full. This meant that no back-pressure
was applied to the sender, thus it continued to
send data, resulting in data loss without any
error being reported. Furthermore, the amount
of credits was essentially fixed to a small
amount, leading to reduced performance.

This is fixed by computing the number of returned
LE flow credits based on the estimated available
space in the receive buffer of an L2CAP socket.
Consequently, if the receive buffer is full, no
credits are returned until the buffer is read and
thus cleared by user-space.

Since the computation of available receive buffer
space can only be performed approximately (due to
sk_buff overhead) and the receive buffer size may
be changed by user-space after flow credits have
been sent, superfluous received data is temporary
stored within l2cap_pinfo. This is necessary
because Bluetooth LE provides no retransmission
mechanism once the data has been acked by the
physical layer.

If receive buffer space estimation is not possible
at the moment, we fall back to providing credits
for one full packet as before. This is currently
the case during connection setup, when MPS is not
yet available.

Fixes: b1c325c23d75 ("Bluetooth: Implement returning of LE L2CAP credits")
Signed-off-by: Sebastian Urban 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin