linux.git/include/uapi, branch v6.1.82

bpf: Derive source IP addr via bpf_*_fib_lookup()

2024-03-06T14:45:20+00:00

commit dab4e1f06cabb6834de14264394ccab197007302 upstream.

Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.

For example, the following snippet can be used to derive the desired
source IP address:

    struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };

    ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
            BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
    if (ret != BPF_FIB_LKUP_RET_SUCCESS)
        return TC_ACT_SHOT;

    /* the p.ipv4_src now contains the source address */

The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.

For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.

The change was tested with Cilium [1].

Nikolay Aleksandrov helped to figure out the IPv6 addr selection.

[1]: https://github.com/cilium/cilium/pull/28283

Signed-off-by: Martynas Pumputis 
Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt
Signed-off-by: Martin KaFai Lau 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Greg Kroah-Hartman

bpf: Add table ID to bpf_fib_lookup BPF helper

2024-03-06T14:45:20+00:00

commit 8ad77e72caae22a1ddcfd0c03f2884929e93b7a4 upstream.

Add ability to specify routing table ID to the `bpf_fib_lookup` BPF
helper.

A new field `tbid` is added to `struct bpf_fib_lookup` used as
parameters to the `bpf_fib_lookup` BPF helper.

When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and
`BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup`
will be used as the table ID for the fib lookup.

If the `tbid` does not exist the fib lookup will fail with
`BPF_FIB_LKUP_RET_NOT_FWDED`.

The `tbid` field becomes a union over the vlan related output fields
in `struct bpf_fib_lookup` and will be zeroed immediately after usage.

This functionality is useful in containerized environments.

For instance, if a CNI wants to dictate the next-hop for traffic leaving
a container it can create a container-specific routing table and perform
a fib lookup against this table in a "host-net-namespace-side" TC program.

This functionality also allows `ip rule` like functionality at the TC
layer, allowing an eBPF program to pick a routing table based on some
aspect of the sk_buff.

As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN
datapath.

When egress traffic leaves a Pod an eBPF program attached by Cilium will
determine which VRF the egress traffic should target, and then perform a
FIB lookup in a specific table representing this VRF's FIB.

Signed-off-by: Louis DeLosSantos 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@gmail.com
Signed-off-by: Greg Kroah-Hartman

uapi: in6: replace temporary label with rfc9486

2024-03-06T14:45:07+00:00

[ Upstream commit 6a2008641920a9c6fe1abbeb9acbec463215d505 ]

Not really a fix per se, but IPV6_TLV_IOAM is still tagged as "TEMPORARY
IANA allocation for IOAM", while RFC 9486 is available for some time
now. Just update the reference.

Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Signed-off-by: Justin Iurman 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20240226124921.9097-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

netfilter: nft_compat: reject unused compat flag

2024-02-16T18:06:28+00:00

[ Upstream commit 292781c3c5485ce33bd22b2ef1b2bed709b4d672 ]

Flag (1 << 0) is ignored is set, never used, reject it it with EINVAL
instead.

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args

2024-02-01T00:17:07+00:00

commit 173431b274a9a54fc10b273b46e67f46bcf62d2e upstream.

Add extra sanity check for btrfs_ioctl_defrag_range_args::flags.

This is not really to enhance fuzzing tests, but as a preparation for
future expansion on btrfs_ioctl_defrag_range_args.

In the future we're going to add new members, allowing more fine tuning
for btrfs defrag.  Without the -ENONOTSUPP error, there would be no way
to detect if the kernel supports those new defrag features.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana 
Signed-off-by: Qu Wenruo 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba 
Signed-off-by: Greg Kroah-Hartman

bpf: Add crosstask check to __bpf_get_stack

2024-01-25T23:27:24+00:00

[ Upstream commit b8e3a87a627b575896e448021e5c2f8a3bc19931 ]

Currently get_perf_callchain only supports user stack walking for
the current task. Passing the correct *crosstask* param will return
0 frames if the task passed to __bpf_get_stack isn't the current
one instead of a single incorrect frame/address. This change
passes the correct *crosstask* param but also does a preemptive
check in __bpf_get_stack if the task is current and returns
-EOPNOTSUPP if it is not.

This issue was found using bpf_get_task_stack inside a BPF
iterator ("iter/task"), which iterates over all tasks.
bpf_get_task_stack works fine for fetching kernel stacks
but because get_perf_callchain relies on the caller to know
if the requested *task* is the current one (via *crosstask*)
it was failing in a confusing way.

It might be possible to get user stacks for all tasks utilizing
something like access_process_vm but that requires the bpf
program calling bpf_get_task_stack to be sleepable and would
therefore be a breaking change.

Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()")
Signed-off-by: Jordan Rome 
Signed-off-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/20231108112334.3433136-1-jordalgo@meta.com
Signed-off-by: Sasha Levin

netfilter: nft_exthdr: add boolean DCCP option matching

2023-12-13T17:39:10+00:00

[ Upstream commit b9f9a485fb0eb80b0e2b90410b28cbb9b0e85687 ]

The xt_dccp iptables module supports the matching of DCCP packets based
on the presence or absence of DCCP options.  Extend nft_exthdr to add
this functionality to nftables.

Link: https://bugzilla.netfilter.org/show_bug.cgi?id=930
Signed-off-by: Jeremy Sowden 
Signed-off-by: Florian Westphal 
Stable-dep-of: 63331e37fb22 ("netfilter: nf_tables: fix 'exist' matching on bigendian arches")
Signed-off-by: Sasha Levin

uapi: propagate __struct_group() attributes to the container union

2023-12-08T07:51:17+00:00

[ Upstream commit 4e86f32a13af1970d21be94f659cae56bbe487ee ]

Recently the kernel test robot has reported an ARM-specific BUILD_BUG_ON()
in an old and unmaintained wil6210 wireless driver. The problem comes from
the structure packing rules of old ARM ABI ('-mabi=apcs-gnu'). For example,
the following structure is packed to 18 bytes instead of 16:

struct poorly_packed {
        unsigned int a;
        unsigned int b;
        unsigned short c;
        union {
                struct {
                        unsigned short d;
                        unsigned int e;
                } __attribute__((packed));
                struct {
                        unsigned short d;
                        unsigned int e;
                } __attribute__((packed)) inner;
        };
} __attribute__((packed));

To fit it into 16 bytes, it's required to add packed attribute to the
container union as well:

struct poorly_packed {
        unsigned int a;
        unsigned int b;
        unsigned short c;
        union {
                struct {
                        unsigned short d;
                        unsigned int e;
                } __attribute__((packed));
                struct {
                        unsigned short d;
                        unsigned int e;
                } __attribute__((packed)) inner;
        } __attribute__((packed));
} __attribute__((packed));

Thanks to Andrew Pinski of GCC team for sorting the things out at
https://gcc.gnu.org/pipermail/gcc/2023-November/242888.html.

Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202311150821.cI4yciFE-lkp@intel.com
Signed-off-by: Dmitry Antipov 
Link: https://lore.kernel.org/r/20231120110607.98956-1-dmantipov@yandex.ru
Fixes: 50d7bd38c3aa ("stddef: Introduce struct_group() helper macro")
Signed-off-by: Kees Cook 
Signed-off-by: Sasha Levin

vsock: read from socket's error queue

2023-11-28T17:06:56+00:00

[ Upstream commit 49dbe25adac42d3e06f65d1420946bec65896222 ]

This adds handling of MSG_ERRQUEUE input flag in receive call. This flag
is used to read socket's error queue instead of data queue. Possible
scenario of error queue usage is receiving completions for transmission
with MSG_ZEROCOPY flag. This patch also adds new defines: 'SOL_VSOCK'
and 'VSOCK_RECVERR'.

Signed-off-by: Arseniy Krasnov 
Reviewed-by: Stefano Garzarella 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

x86/sev: Change snp_guest_issue_request()'s fw_err argument

2023-11-20T10:52:13+00:00

[ Upstream commit 0144e3b85d7b42e8a4cda991c0e81f131897457a ]

The GHCB specification declares that the firmware error value for
a guest request will be stored in the lower 32 bits of EXIT_INFO_2. The
upper 32 bits are for the VMM's own error code. The fw_err argument to
snp_guest_issue_request() is thus a misnomer, and callers will need
access to all 64 bits.

The type of unsigned long also causes problems, since sw_exit_info2 is
u64 (unsigned long long) vs the argument's unsigned long*. Change this
type for issuing the guest request. Pass the ioctl command struct's error
field directly instead of in a local variable, since an incomplete guest
request may not set the error code, and uninitialized stack memory would
be written back to user space.

The firmware might not even be called, so bookend the call with the no
firmware call error and clear the error.

Since the "fw_err" field is really exitinfo2 split into the upper bits'
vmm error code and lower bits' firmware error code, convert the 64 bit
value to a union.

[ bp:
- Massage commit message
- adjust code
- Fix a build issue as
Reported-by: kernel test robot
Link: https://lore.kernel.org/oe-kbuild-all/202303070609.vX6wp2Af-lkp@intel.com
- print exitinfo2 in hex
Tom:
- Correct -EIO exit case. ]

Signed-off-by: Dionna Glaze
Signed-off-by: Tom Lendacky
Signed-off-by: Borislav Petkov (AMD)
Link: https://lore.kernel.org/r/20230214164638.1189804-5-dionnaglaze@google.com
Link: https://lore.kernel.org/r/20230307192449.24732-12-bp@alien8.de
Stable-dep-of: db10cb9b5746 ("virt: sevguest: Fix passing a stack buffer as a scatterlist target")
Signed-off-by: Sasha Levin