linux.git/include, branch v4.18.8

uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name

2018-09-15T07:47:00+00:00

commit 8a2336e549d385bb0b46880435b411df8d8200e8 upstream.

Since this header is in "include/uapi/linux/", apparently people want to
use it in userspace programs -- even in C++ ones.  However, the header
uses a C++ reserved keyword ("private"), so change that to "dh_private"
instead to allow the header file to be used in C++ userspace.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=191051
Link: http://lkml.kernel.org/r/0db6c314-1ef4-9bfa-1baa-7214dd2ee061@infradead.org
Fixes: ddbb41148724 ("KEYS: Add KEYCTL_DH_COMPUTE command")
Signed-off-by: Randy Dunlap 
Reviewed-by: Andrew Morton 
Cc: David Howells 
Cc: James Morris 
Cc: "Serge E. Hallyn" 
Cc: Mat Martineau 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

tcp, ulp: add alias for all ulp modules

2018-09-15T07:46:49+00:00

[ Upstream commit 037b0b86ecf5646f8eae777d8b52ff8b401692ec ]

Lets not turn the TCP ULP lookup into an arbitrary module loader as
we only intend to load ULP modules through this mechanism, not other
unrelated kernel modules:

  [root@bar]# cat foo.c
  #include 
  #include 
  #include 
  #include 

  int main(void)
  {
      int sock = socket(PF_INET, SOCK_STREAM, 0);
      setsockopt(sock, IPPROTO_TCP, TCP_ULP, "sctp", sizeof("sctp"));
      return 0;
  }

  [root@bar]# gcc foo.c -O2 -Wall
  [root@bar]# lsmod | grep sctp
  [root@bar]# ./a.out
  [root@bar]# lsmod | grep sctp
  sctp                 1077248  4
  libcrc32c              16384  3 nf_conntrack,nf_nat,sctp
  [root@bar]#

Fix it by adding module alias to TCP ULP modules, so probing module
via request_module() will be limited to tcp-ulp-[name]. The existing
modules like kTLS will load fine given tcp-ulp-tls alias, but others
will fail to load:

  [root@bar]# lsmod | grep sctp
  [root@bar]# ./a.out
  [root@bar]# lsmod | grep sctp
  [root@bar]#

Sockmap is not affected from this since it's either built-in or not.

Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Signed-off-by: Daniel Borkmann 
Acked-by: John Fastabend 
Acked-by: Song Liu 
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

r8169: add support for NCube 8168 network card

2018-09-15T07:46:41+00:00

[ Upstream commit 9fd0e09a4e86499639653243edfcb417a05c5c46 ]

This card identifies itself as:
  Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06)
  Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468]

Adding a new entry to rtl8169_pci_tbl makes the card work.

Link: http://launchpad.net/bugs/1788730
Signed-off-by: Anthony Wong 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

udlfb: make a local copy of fb_ops

2018-09-09T08:32:40+00:00

commit 2c29cfc3eaf11779176bf41475cfca49bccba11c upstream.

The defio subsystem overwrites the method fb_osp->mmap. That method is
stored in module's static data - and that means that if we have multiple
diplaylink adapters, they will over write each other's method.

In order to avoid interference between multiple adapters, we copy the
fb_ops structure to a device-local memory.

Signed-off-by: Mikulas Patocka 
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Greg Kroah-Hartman

udlfb: set optimal write delay

2018-09-09T08:32:40+00:00

commit bb24153a3f13dd0dbc1f8055ad97fe346d598f66 upstream.

The default delay 5 jiffies is too much when the kernel is compiled with
HZ=100 - it results in jumpy cursor in Xwindow.

In order to find out the optimal delay, I benchmarked the driver on
1280x720x30fps video. I found out that with HZ=1000, 10ms is acceptable,
but with HZ=250 or HZ=300, we need 4ms, so that the video is played
without any frame skips.

This patch changes the delay to this value.

Signed-off-by: Mikulas Patocka 
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Greg Kroah-Hartman

udlfb: don't switch if we are switching to the same videomode

2018-09-09T08:32:40+00:00

commit 564f1807379298dfdb12ed0d5b25fcb89c238527 upstream.

The udlfb driver reprograms the hardware everytime the user switches the
console, that makes quite unusable when working on the console.

This patch makes the driver remember the videomode we are in and avoid
reprogramming the hardware if we switch to the same videomode.

We mask the "activate" field and the "FB_VMODE_SMOOTH_XPAN" flag when
comparing the videomode, because they cause spurious switches when
switching to and from the Xserver.

Signed-off-by: Mikulas Patocka 
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Greg Kroah-Hartman

udlfb: fix semaphore value leak

2018-09-09T08:32:40+00:00

commit 9d0aa601e4cd9c0892f90d36e8488d79b72f4073 upstream.

I observed that the performance of the udl fb driver degrades over time.
On a freshly booted machine, it takes 6 seconds to do "ls -la /usr/bin";
after some time of use, the same operation takes 14 seconds.

The reason is that the value of "limit_sem" decays over time.

The udl driver uses a semaphore "limit_set" to specify how many free urbs
are there on dlfb->urbs.list. If the count is zero, the "down" operation
will sleep until some urbs are added to the freelist.

In order to avoid some hypothetical deadlock, the driver will not call
"up" immediately, but it will offload it to a workqueue. The problem is
that if we call "schedule_delayed_work" on the same work item multiple
times, the work item may only be executed once.

This is happening:
* some urb completes
* dlfb_urb_completion adds it to the free list
* dlfb_urb_completion calls schedule_delayed_work to schedule the function
  dlfb_release_urb_work to increase the semaphore count
* as the urb is on the free list, some other task grabs it and submits it
* the submitted urb completes, dlfb_urb_completion is called again
* dlfb_urb_completion calls schedule_delayed_work, but the work is already
  scheduled, so it does nothing
* finally, dlfb_release_urb_work is called, it increases the semaphore
  count by 1, although it should increase it by 2

So, the semaphore count is decreasing over time, and this causes gradual
performance degradation.

Note that in the current kernel, the "up" function may be called from
interrupt and it may race with the "down" function called by another
thread, so we don't have to offload the call of "up" to a workqueue at
all. This patch removes the workqueue code. The patch also changes
"down_interruptible" to "down" in dlfb_free_urb_list, so that we will
clean up the driver properly even if a signal arrives.

With this patch, the performance of udlfb no longer degrades.

Signed-off-by: Mikulas Patocka 
Cc: stable@vger.kernel.org
[b.zolnierkie: fix immediatelly -> immediately typo]
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Greg Kroah-Hartman

iommu/vt-d: Fix dev iotlb pfsid use

2018-09-09T08:32:39+00:00

commit 1c48db44924298ad0cb5a6386b88017539be8822 upstream.

PFSID should be used in the invalidation descriptor for flushing
device IOTLBs on SRIOV VFs.

Signed-off-by: Jacob Pan 
Cc: stable@vger.kernel.org
Cc: "Ashok Raj" 
Cc: "Lu Baolu" 
Signed-off-by: Joerg Roedel 
Signed-off-by: Greg Kroah-Hartman

iommu/vt-d: Add definitions for PFSID

2018-09-09T08:32:39+00:00

commit 0f725561e168485eff7277d683405c05b192f537 upstream.

When SRIOV VF device IOTLB is invalidated, we need to provide
the PF source ID such that IOMMU hardware can gauge the depth
of invalidation queue which is shared among VFs. This is needed
when device invalidation throttle (DIT) capability is supported.

This patch adds bit definitions for checking and tracking PFSID.

Signed-off-by: Jacob Pan 
Cc: stable@vger.kernel.org
Cc: "Ashok Raj" 
Cc: "Lu Baolu" 
Signed-off-by: Joerg Roedel 
Signed-off-by: Greg Kroah-Hartman

NFSv4 client live hangs after live data migration recovery

2018-09-09T08:32:38+00:00

commit 0f90be132cbf1537d87a6a8b9e80867adac892f6 upstream.

After a live data migration event at the NFS server, the client may send
I/O requests to the wrong server, causing a live hang due to repeated
recovery events.  On the wire, this will appear as an I/O request failing
with NFS4ERR_BADSESSION, followed by successful CREATE_SESSION, repeatedly.
NFS4ERR_BADSSESSION is returned because the session ID being used was
issued by the other server and is not valid at the old server.

The failure is caused by async worker threads having cached the transport
(xprt) in the rpc_task structure.  After the migration recovery completes,
the task is redispatched and the task resends the request to the wrong
server based on the old value still present in tk_xprt.

The solution is to recompute the tk_xprt field of the rpc_task structure
so that the request goes to the correct server.

Signed-off-by: Bill Baker 
Reviewed-by: Chuck Lever 
Tested-by: Helen Chao 
Fixes: fb43d17210ba ("SUNRPC: Use the multipath iterator to assign a ...")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Anna Schumaker 
Signed-off-by: Greg Kroah-Hartman