<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/include, branch v4.19.192</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>vt: Fix character height handling with VT_RESIZEX</title>
<updated>2021-05-26T09:48:35+00:00</updated>
<author>
<name>Maciej W. Rozycki</name>
<email>macro@orcam.me.uk</email>
</author>
<published>2021-05-13T09:51:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=8c5ec4a731e1e2d9b6906bcde62de57a609a9b86'/>
<id>8c5ec4a731e1e2d9b6906bcde62de57a609a9b86</id>
<content type='text'>
commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream.

Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.

For framebuffer devices the two values are always the same, because the
former is inferred from the latter one.  For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator.  One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.

The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within.  Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.

This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):

 "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
  for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
  larger than actual font height calculated by con_font_set() from
  ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
  minimal amount of memory based on actual font height calculated by
  con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
  data."

The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: &lt;git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git&gt;
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:

 		if (clin)
-			video_font_height = clin;
+			vc-&gt;vc_font.height = clin;

making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable.  Use "cell" in the new struct member then to avoid ambiguity.

References:

[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3

Signed-off-by: Maciej W. Rozycki &lt;macro@orcam.me.uk&gt;
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream.

Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.

For framebuffer devices the two values are always the same, because the
former is inferred from the latter one.  For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator.  One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.

The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within.  Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.

This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):

 "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
  for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
  larger than actual font height calculated by con_font_set() from
  ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
  minimal amount of memory based on actual font height calculated by
  con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
  data."

The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: &lt;git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git&gt;
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:

 		if (clin)
-			video_font_height = clin;
+			vc-&gt;vc_font.height = clin;

making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable.  Use "cell" in the new struct member then to avoid ambiguity.

References:

[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3

Signed-off-by: Maciej W. Rozycki &lt;macro@orcam.me.uk&gt;
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>iomap: fix sub-page uptodate handling</title>
<updated>2021-05-22T08:59:50+00:00</updated>
<author>
<name>Christoph Hellwig</name>
<email>hch@lst.de</email>
</author>
<published>2019-12-04T17:33:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=c923258e341bec211b6945a2be2ce564762c7868'/>
<id>c923258e341bec211b6945a2be2ce564762c7868</id>
<content type='text'>
commit 1cea335d1db1ce6ab71b3d2f94a807112b738a0f upstream.

bio completions can race when a page spans more than one file system
block.  Add a spinlock to synchronize marking the page uptodate.

Fixes: 9dc55f1389f9 ("iomap: add support for sub-pagesize buffered I/O without buffer heads")
Reported-by: Jan Stancek &lt;jstancek@redhat.com&gt;
Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Dave Chinner &lt;dchinner@redhat.com&gt;
Reviewed-by: Darrick J. Wong &lt;darrick.wong@oracle.com&gt;
Signed-off-by: Darrick J. Wong &lt;darrick.wong@oracle.com&gt;
Signed-off-by: Matthew Wilcox (Oracle) &lt;willy@infradead.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 1cea335d1db1ce6ab71b3d2f94a807112b738a0f upstream.

bio completions can race when a page spans more than one file system
block.  Add a spinlock to synchronize marking the page uptodate.

Fixes: 9dc55f1389f9 ("iomap: add support for sub-pagesize buffered I/O without buffer heads")
Reported-by: Jan Stancek &lt;jstancek@redhat.com&gt;
Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Dave Chinner &lt;dchinner@redhat.com&gt;
Reviewed-by: Darrick J. Wong &lt;darrick.wong@oracle.com&gt;
Signed-off-by: Darrick J. Wong &lt;darrick.wong@oracle.com&gt;
Signed-off-by: Matthew Wilcox (Oracle) &lt;willy@infradead.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>netfilter: xt_SECMARK: add new revision to fix structure layout</title>
<updated>2021-05-22T08:59:43+00:00</updated>
<author>
<name>Pablo Neira Ayuso</name>
<email>pablo@netfilter.org</email>
</author>
<published>2021-04-30T12:00:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=20bff2f8c3e47d17214126e39db88747f7fd7399'/>
<id>20bff2f8c3e47d17214126e39db88747f7fd7399</id>
<content type='text'>
[ Upstream commit c7d13358b6a2f49f81a34aa323a2d0878a0532a2 ]

This extension breaks when trying to delete rules, add a new revision to
fix this.

Fixes: 5e6874cdb8de ("[SECMARK]: Add xtables SECMARK target")
Signed-off-by: Phil Sutter &lt;phil@nwl.cc&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit c7d13358b6a2f49f81a34aa323a2d0878a0532a2 ]

This extension breaks when trying to delete rules, add a new revision to
fix this.

Fixes: 5e6874cdb8de ("[SECMARK]: Add xtables SECMARK target")
Signed-off-by: Phil Sutter &lt;phil@nwl.cc&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>i2c: Add I2C_AQ_NO_REP_START adapter quirk</title>
<updated>2021-05-22T08:59:40+00:00</updated>
<author>
<name>Bence Csókás</name>
<email>bence98@sch.bme.hu</email>
</author>
<published>2021-03-31T19:19:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=9f146c5d36fab8341e61559c57af629906eabc54'/>
<id>9f146c5d36fab8341e61559c57af629906eabc54</id>
<content type='text'>
[ Upstream commit aca01415e076aa96cca0f801f4420ee5c10c660d ]

This quirk signifies that the adapter cannot do a repeated
START, it always issues a STOP condition after transfers.

Suggested-by: Wolfram Sang &lt;wsa@kernel.org&gt;
Signed-off-by: Bence Csókás &lt;bence98@sch.bme.hu&gt;
Signed-off-by: Wolfram Sang &lt;wsa@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit aca01415e076aa96cca0f801f4420ee5c10c660d ]

This quirk signifies that the adapter cannot do a repeated
START, it always issues a STOP condition after transfers.

Suggested-by: Wolfram Sang &lt;wsa@kernel.org&gt;
Signed-off-by: Bence Csókás &lt;bence98@sch.bme.hu&gt;
Signed-off-by: Wolfram Sang &lt;wsa@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>smp: Fix smp_call_function_single_async prototype</title>
<updated>2021-05-22T08:59:39+00:00</updated>
<author>
<name>Arnd Bergmann</name>
<email>arnd@arndb.de</email>
</author>
<published>2021-05-05T21:12:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=db0517ac659e0ac61b916cffc29564cf3ab58b0d'/>
<id>db0517ac659e0ac61b916cffc29564cf3ab58b0d</id>
<content type='text'>
commit 1139aeb1c521eb4a050920ce6c64c36c4f2a3ab7 upstream.

As of commit 966a967116e6 ("smp: Avoid using two cache lines for struct
call_single_data"), the smp code prefers 32-byte aligned call_single_data
objects for performance reasons, but the block layer includes an instance
of this structure in the main 'struct request' that is more senstive
to size than to performance here, see 4ccafe032005 ("block: unalign
call_single_data in struct request").

The result is a violation of the calling conventions that clang correctly
points out:

block/blk-mq.c:630:39: warning: passing 8-byte aligned argument to 32-byte aligned parameter 2 of 'smp_call_function_single_async' may result in an unaligned pointer access [-Walign-mismatch]
                smp_call_function_single_async(cpu, &amp;rq-&gt;csd);

It does seem that the usage of the call_single_data without cache line
alignment should still be allowed by the smp code, so just change the
function prototype so it accepts both, but leave the default alignment
unchanged for the other users. This seems better to me than adding
a local hack to shut up an otherwise correct warning in the caller.

Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Peter Zijlstra (Intel) &lt;peterz@infradead.org&gt;
Acked-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Link: https://lkml.kernel.org/r/20210505211300.3174456-1-arnd@kernel.org
[nc: Fix conflicts]
Signed-off-by: Nathan Chancellor &lt;nathan@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 1139aeb1c521eb4a050920ce6c64c36c4f2a3ab7 upstream.

As of commit 966a967116e6 ("smp: Avoid using two cache lines for struct
call_single_data"), the smp code prefers 32-byte aligned call_single_data
objects for performance reasons, but the block layer includes an instance
of this structure in the main 'struct request' that is more senstive
to size than to performance here, see 4ccafe032005 ("block: unalign
call_single_data in struct request").

The result is a violation of the calling conventions that clang correctly
points out:

block/blk-mq.c:630:39: warning: passing 8-byte aligned argument to 32-byte aligned parameter 2 of 'smp_call_function_single_async' may result in an unaligned pointer access [-Walign-mismatch]
                smp_call_function_single_async(cpu, &amp;rq-&gt;csd);

It does seem that the usage of the call_single_data without cache line
alignment should still be allowed by the smp code, so just change the
function prototype so it accepts both, but leave the default alignment
unchanged for the other users. This seems better to me than adding
a local hack to shut up an otherwise correct warning in the caller.

Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Peter Zijlstra (Intel) &lt;peterz@infradead.org&gt;
Acked-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Link: https://lkml.kernel.org/r/20210505211300.3174456-1-arnd@kernel.org
[nc: Fix conflicts]
Signed-off-by: Nathan Chancellor &lt;nathan@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>HID: plantronics: Workaround for double volume key presses</title>
<updated>2021-05-22T08:59:34+00:00</updated>
<author>
<name>Maxim Mikityanskiy</name>
<email>maxtram95@gmail.com</email>
</author>
<published>2021-02-07T14:47:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=878177b897d6fc461010735fc73b28aa69845f1c'/>
<id>878177b897d6fc461010735fc73b28aa69845f1c</id>
<content type='text'>
[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ]

Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.

The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.

Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy &lt;maxtram95@gmail.com&gt;
Signed-off-by: Jiri Kosina &lt;jkosina@suse.cz&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ]

Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.

The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.

Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy &lt;maxtram95@gmail.com&gt;
Signed-off-by: Jiri Kosina &lt;jkosina@suse.cz&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tty: fix return value for unsupported ioctls</title>
<updated>2021-05-22T08:59:31+00:00</updated>
<author>
<name>Johan Hovold</name>
<email>johan@kernel.org</email>
</author>
<published>2021-04-07T09:52:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=76d7fc0857bc4033415fcad905db13753d0febc7'/>
<id>76d7fc0857bc4033415fcad905db13753d0febc7</id>
<content type='text'>
[ Upstream commit 1b8b20868a6d64cfe8174a21b25b74367bdf0560 ]

Drivers should return -ENOTTY ("Inappropriate I/O control operation")
when an ioctl isn't supported, while -EINVAL is used for invalid
arguments.

Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned
-EINVAL when a tty driver did not implement the corresponding
operations.

Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a
corresponding Fixes tag below.

Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler")
Signed-off-by: Johan Hovold &lt;johan@kernel.org&gt;
Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 1b8b20868a6d64cfe8174a21b25b74367bdf0560 ]

Drivers should return -ENOTTY ("Inappropriate I/O control operation")
when an ioctl isn't supported, while -EINVAL is used for invalid
arguments.

Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned
-EINVAL when a tty driver did not implement the corresponding
operations.

Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a
corresponding Fixes tag below.

Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler")
Signed-off-by: Johan Hovold &lt;johan@kernel.org&gt;
Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tty: actually undefine superseded ASYNC flags</title>
<updated>2021-05-22T08:59:31+00:00</updated>
<author>
<name>Johan Hovold</name>
<email>johan@kernel.org</email>
</author>
<published>2021-04-07T09:52:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=2c9525d64418383861679d3519ebc10002123507'/>
<id>2c9525d64418383861679d3519ebc10002123507</id>
<content type='text'>
[ Upstream commit d09845e98a05850a8094ea8fd6dd09a8e6824fff ]

Some kernel-internal ASYNC flags have been superseded by tty-port flags
and should no longer be used by kernel drivers.

Fix the misspelled "__KERNEL__" compile guards which failed their sole
purpose to break out-of-tree drivers that have not yet been updated.

Fixes: 5c0517fefc92 ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags")
Signed-off-by: Johan Hovold &lt;johan@kernel.org&gt;
Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit d09845e98a05850a8094ea8fd6dd09a8e6824fff ]

Some kernel-internal ASYNC flags have been superseded by tty-port flags
and should no longer be used by kernel drivers.

Fix the misspelled "__KERNEL__" compile guards which failed their sole
purpose to break out-of-tree drivers that have not yet been updated.

Fixes: 5c0517fefc92 ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags")
Signed-off-by: Johan Hovold &lt;johan@kernel.org&gt;
Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>spi: Fix use-after-free with devm_spi_alloc_*</title>
<updated>2021-05-22T08:59:30+00:00</updated>
<author>
<name>William A. Kennington III</name>
<email>wak@google.com</email>
</author>
<published>2021-04-07T09:55:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=28a5529068c51cdf0295ab1e11a99a3a909a03e4'/>
<id>28a5529068c51cdf0295ab1e11a99a3a909a03e4</id>
<content type='text'>
[ Upstream commit 794aaf01444d4e765e2b067cba01cc69c1c68ed9 ]

We can't rely on the contents of the devres list during
spi_unregister_controller(), as the list is already torn down at the
time we perform devres_find() for devm_spi_release_controller. This
causes devices registered with devm_spi_alloc_{master,slave}() to be
mistakenly identified as legacy, non-devm managed devices and have their
reference counters decremented below 0.

------------[ cut here ]------------
WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174
[&lt;b0396f04&gt;] (refcount_warn_saturate) from [&lt;b03c56a4&gt;] (kobject_put+0x90/0x98)
[&lt;b03c5614&gt;] (kobject_put) from [&lt;b0447b4c&gt;] (put_device+0x20/0x24)
 r4:b6700140
[&lt;b0447b2c&gt;] (put_device) from [&lt;b07515e8&gt;] (devm_spi_release_controller+0x3c/0x40)
[&lt;b07515ac&gt;] (devm_spi_release_controller) from [&lt;b045343c&gt;] (release_nodes+0x84/0xc4)
 r5:b6700180 r4:b6700100
[&lt;b04533b8&gt;] (release_nodes) from [&lt;b0454160&gt;] (devres_release_all+0x5c/0x60)
 r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10
[&lt;b0454104&gt;] (devres_release_all) from [&lt;b044e41c&gt;] (__device_release_driver+0x144/0x1ec)
 r5:b117ad94 r4:b163dc10
[&lt;b044e2d8&gt;] (__device_release_driver) from [&lt;b044f70c&gt;] (device_driver_detach+0x84/0xa0)
 r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10
[&lt;b044f688&gt;] (device_driver_detach) from [&lt;b044d274&gt;] (unbind_store+0xe4/0xf8)

Instead, determine the devm allocation state as a flag on the
controller which is guaranteed to be stable during cleanup.

Fixes: 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation")
Signed-off-by: William A. Kennington III &lt;wak@google.com&gt;
Link: https://lore.kernel.org/r/20210407095527.2771582-1-wak@google.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 794aaf01444d4e765e2b067cba01cc69c1c68ed9 ]

We can't rely on the contents of the devres list during
spi_unregister_controller(), as the list is already torn down at the
time we perform devres_find() for devm_spi_release_controller. This
causes devices registered with devm_spi_alloc_{master,slave}() to be
mistakenly identified as legacy, non-devm managed devices and have their
reference counters decremented below 0.

------------[ cut here ]------------
WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174
[&lt;b0396f04&gt;] (refcount_warn_saturate) from [&lt;b03c56a4&gt;] (kobject_put+0x90/0x98)
[&lt;b03c5614&gt;] (kobject_put) from [&lt;b0447b4c&gt;] (put_device+0x20/0x24)
 r4:b6700140
[&lt;b0447b2c&gt;] (put_device) from [&lt;b07515e8&gt;] (devm_spi_release_controller+0x3c/0x40)
[&lt;b07515ac&gt;] (devm_spi_release_controller) from [&lt;b045343c&gt;] (release_nodes+0x84/0xc4)
 r5:b6700180 r4:b6700100
[&lt;b04533b8&gt;] (release_nodes) from [&lt;b0454160&gt;] (devres_release_all+0x5c/0x60)
 r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10
[&lt;b0454104&gt;] (devres_release_all) from [&lt;b044e41c&gt;] (__device_release_driver+0x144/0x1ec)
 r5:b117ad94 r4:b163dc10
[&lt;b044e2d8&gt;] (__device_release_driver) from [&lt;b044f70c&gt;] (device_driver_detach+0x84/0xa0)
 r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10
[&lt;b044f688&gt;] (device_driver_detach) from [&lt;b044d274&gt;] (unbind_store+0xe4/0xf8)

Instead, determine the devm allocation state as a flag on the
controller which is guaranteed to be stable during cleanup.

Fixes: 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation")
Signed-off-by: William A. Kennington III &lt;wak@google.com&gt;
Link: https://lore.kernel.org/r/20210407095527.2771582-1-wak@google.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: verify AMP hci_chan before amp_destroy</title>
<updated>2021-05-22T08:59:23+00:00</updated>
<author>
<name>Archie Pusaka</name>
<email>apusaka@chromium.org</email>
</author>
<published>2021-03-22T06:03:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=75e26178e26f910f7f26c79c2824b726eecf0dfb'/>
<id>75e26178e26f910f7f26c79c2824b726eecf0dfb</id>
<content type='text'>
commit 5c4c8c9544099bb9043a10a5318130a943e32fc3 upstream.

hci_chan can be created in 2 places: hci_loglink_complete_evt() if
it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory,
Only AMP hci_chan should be removed by a call to
hci_disconn_loglink_complete_evt(). However, the controller might mess
up, call that function, and destroy an hci_chan which is not initiated
by hci_loglink_complete_evt().

This patch adds a verification that the destroyed hci_chan must have
been init'd by hci_loglink_complete_evt().

Example crash call trace:
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xe3/0x144 lib/dump_stack.c:118
 print_address_description+0x67/0x22a mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report mm/kasan/report.c:412 [inline]
 kasan_report+0x251/0x28f mm/kasan/report.c:396
 hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072
 l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877
 l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661
 l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline]
 l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline]
 l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline]
 l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline]
 l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023
 l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596
 hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline]
 hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

Allocated by task 38:
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553
 kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787
 kmalloc include/linux/slab.h:515 [inline]
 kzalloc include/linux/slab.h:709 [inline]
 hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674
 l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062
 l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline]
 l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381
 hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404
 hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline]
 hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981
 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

Freed by task 1732:
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free mm/kasan/kasan.c:521 [inline]
 __kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493
 slab_free_hook mm/slub.c:1409 [inline]
 slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436
 slab_free mm/slub.c:3009 [inline]
 kfree+0x182/0x21e mm/slub.c:3972
 hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline]
 hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050
 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

The buggy address belongs to the object at ffff8881d7af9180
 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 24 bytes inside of
 128-byte region [ffff8881d7af9180, ffff8881d7af9200)
The buggy address belongs to the page:
page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0
flags: 0x8000000000000200(slab)
raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200
raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
 ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
&gt;ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                            ^
 ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Signed-off-by: Archie Pusaka &lt;apusaka@chromium.org&gt;
Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud &lt;alainm@chromium.org&gt;
Reviewed-by: Abhishek Pandit-Subedi &lt;abhishekpandit@chromium.org&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
Cc: George Kennedy &lt;george.kennedy@oracle.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 5c4c8c9544099bb9043a10a5318130a943e32fc3 upstream.

hci_chan can be created in 2 places: hci_loglink_complete_evt() if
it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory,
Only AMP hci_chan should be removed by a call to
hci_disconn_loglink_complete_evt(). However, the controller might mess
up, call that function, and destroy an hci_chan which is not initiated
by hci_loglink_complete_evt().

This patch adds a verification that the destroyed hci_chan must have
been init'd by hci_loglink_complete_evt().

Example crash call trace:
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xe3/0x144 lib/dump_stack.c:118
 print_address_description+0x67/0x22a mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report mm/kasan/report.c:412 [inline]
 kasan_report+0x251/0x28f mm/kasan/report.c:396
 hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072
 l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877
 l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661
 l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline]
 l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline]
 l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline]
 l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline]
 l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023
 l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596
 hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline]
 hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

Allocated by task 38:
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553
 kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787
 kmalloc include/linux/slab.h:515 [inline]
 kzalloc include/linux/slab.h:709 [inline]
 hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674
 l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062
 l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline]
 l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381
 hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404
 hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline]
 hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981
 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

Freed by task 1732:
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free mm/kasan/kasan.c:521 [inline]
 __kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493
 slab_free_hook mm/slub.c:1409 [inline]
 slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436
 slab_free mm/slub.c:3009 [inline]
 kfree+0x182/0x21e mm/slub.c:3972
 hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline]
 hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050
 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

The buggy address belongs to the object at ffff8881d7af9180
 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 24 bytes inside of
 128-byte region [ffff8881d7af9180, ffff8881d7af9200)
The buggy address belongs to the page:
page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0
flags: 0x8000000000000200(slab)
raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200
raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
 ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
&gt;ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                            ^
 ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Signed-off-by: Archie Pusaka &lt;apusaka@chromium.org&gt;
Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud &lt;alainm@chromium.org&gt;
Reviewed-by: Abhishek Pandit-Subedi &lt;abhishekpandit@chromium.org&gt;
Signed-off-by: Marcel Holtmann &lt;marcel@holtmann.org&gt;
Cc: George Kennedy &lt;george.kennedy@oracle.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
