linux.git/include, branch v4.4.240 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Bluetooth: Disconnect if E0 is used for Level 4 2020-10-17T09:03:30+00:00 Luiz Augusto von Dentz luiz.von.dentz@intel.com 2020-05-20T21:20:14+00:00 cbb6274d5b72c1380e593ea9eb15763f1e2f71c3 commit 8746f135bb01872ff412d408ea1aa9ebd328c1f5 upstream. E0 is not allowed with Level 4: BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319: '128-bit equivalent strength for link and encryption keys required using FIPS approved algorithms (E0 not allowed, SAFER+ not allowed, and P-192 not allowed; encryption key not shortened' SC enabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) Secure Connections (Host Support) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with AES-CCM (0x02) SC disabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with E0 (0x01) [May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 256 Reason: Authentication Failure (0x05) Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Hans-Christian Noren Egtvedt <hegtvedt@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8746f135bb01872ff412d408ea1aa9ebd328c1f5 upstream.

E0 is not allowed with Level 4:

BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319:

  '128-bit equivalent strength for link and encryption keys
   required using FIPS approved algorithms (E0 not allowed,
   SAFER+ not allowed, and P-192 not allowed; encryption key
   not shortened'

SC enabled:

> HCI Event: Read Remote Extended Features (0x23) plen 13
        Status: Success (0x00)
        Handle: 256
        Page: 1/2
        Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          Secure Simple Pairing (Host Support)
          LE Supported (Host)
          Secure Connections (Host Support)
> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 256
        Encryption: Enabled with AES-CCM (0x02)

SC disabled:

> HCI Event: Read Remote Extended Features (0x23) plen 13
        Status: Success (0x00)
        Handle: 256
        Page: 1/2
        Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          Secure Simple Pairing (Host Support)
          LE Supported (Host)
> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 256
        Encryption: Enabled with E0 (0x01)
[May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used
< HCI Command: Disconnect (0x01|0x0006) plen 3
        Handle: 256
        Reason: Authentication Failure (0x05)

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Hans-Christian Noren Egtvedt <hegtvedt@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: Fix update of connection state in `hci_encrypt_cfm` 2020-10-17T09:03:30+00:00 Patrick Steinhardt ps@pks.im 2020-07-15T17:43:33+00:00 0ae6ea94c69d2b335f880753a9ec8b0cb455af21 commit 339ddaa626995bc6218972ca241471f3717cc5f4 upstream. Starting with the upgrade to v5.8-rc3, I've noticed I wasn't able to connect to my Bluetooth headset properly anymore. While connecting to the device would eventually succeed, bluetoothd seemed to be confused about the current connection state where the state was flapping hence and forth. Bisecting this issue led to commit 3ca44c16b0dc (Bluetooth: Consolidate encryption handling in hci_encrypt_cfm, 2020-05-19), which refactored `hci_encrypt_cfm` to also handle updating the connection state. The commit in question changed the code to call `hci_connect_cfm` inside `hci_encrypt_cfm` and to change the connection state. But with the conversion, we now only update the connection state if a status was set already. In fact, the reverse should be true: the status should be updated if no status is yet set. So let's fix the isuse by reversing the condition. Fixes: 3ca44c16b0dc ("Bluetooth: Consolidate encryption handling in hci_encrypt_cfm") Signed-off-by: Patrick Steinhardt <ps@pks.im> Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 339ddaa626995bc6218972ca241471f3717cc5f4 upstream.

Starting with the upgrade to v5.8-rc3, I've noticed I wasn't able to
connect to my Bluetooth headset properly anymore. While connecting to
the device would eventually succeed, bluetoothd seemed to be confused
about the current connection state where the state was flapping hence
and forth. Bisecting this issue led to commit 3ca44c16b0dc (Bluetooth:
Consolidate encryption handling in hci_encrypt_cfm, 2020-05-19), which
refactored `hci_encrypt_cfm` to also handle updating the connection
state.

The commit in question changed the code to call `hci_connect_cfm` inside
`hci_encrypt_cfm` and to change the connection state. But with the
conversion, we now only update the connection state if a status was set
already. In fact, the reverse should be true: the status should be
updated if no status is yet set. So let's fix the isuse by reversing the
condition.

Fixes: 3ca44c16b0dc ("Bluetooth: Consolidate encryption handling in hci_encrypt_cfm")
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by:  Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: Consolidate encryption handling in hci_encrypt_cfm 2020-10-17T09:03:30+00:00 Luiz Augusto von Dentz luiz.von.dentz@intel.com 2020-05-19T20:25:19+00:00 554ab8c6e143606bb205c7d694656fac3d6e3cc2 commit 3ca44c16b0dcc764b641ee4ac226909f5c421aa3 upstream. This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection state is BT_CONFIG so callers don't have to check the state. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Hans-Christian Noren Egtvedt <hegtvedt@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3ca44c16b0dcc764b641ee4ac226909f5c421aa3 upstream.

This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection
state is BT_CONFIG so callers don't have to check the state.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Hans-Christian Noren Egtvedt <hegtvedt@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xfrm: clone XFRMA_REPLAY_ESN_VAL in xfrm_do_migrate 2020-10-14T07:46:23+00:00 Antony Antony antony.antony@secunet.com 2020-09-04T06:49:55+00:00 62457d397b90697b3b805d2316becfa9fd25580e [ Upstream commit 91a46c6d1b4fcbfa4773df9421b8ad3e58088101 ] XFRMA_REPLAY_ESN_VAL was not cloned completely from the old to the new. Migrate this attribute during XFRMA_MSG_MIGRATE v1->v2: - move curleft cloning to a separate patch Fixes: af2f464e326e ("xfrm: Assign esn pointers when cloning a state") Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 91a46c6d1b4fcbfa4773df9421b8ad3e58088101 ]

XFRMA_REPLAY_ESN_VAL was not cloned completely from the old to the new.
Migrate this attribute during XFRMA_MSG_MIGRATE

v1->v2:
 - move curleft cloning to a separate patch

Fixes: af2f464e326e ("xfrm: Assign esn pointers when cloning a state")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mtd: nand: Provide nand_cleanup() function to free NAND related resources 2020-10-14T07:46:22+00:00 Richard Weinberger richard@nod.at 2016-09-21T09:44:41+00:00 9b9dcd96e5b43905ece89d72883a08c42886ebf9 [ Upstream commit d44154f969a44269a9288c274c1c2fd9e85df8a5 ] Provide a nand_cleanup() function to free all nand related resources without unregistering the mtd device. This should allow drivers to call mtd_device_unregister() and handle its return value and still being able to cleanup all nand related resources. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Daniel Walter <dwalter@sigma-star.at> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d44154f969a44269a9288c274c1c2fd9e85df8a5 ]

Provide a nand_cleanup() function to free all nand related resources
without unregistering the mtd device.
This should allow drivers to call mtd_device_unregister() and handle
its return value and still being able to cleanup all nand related
resources.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel Walter <dwalter@sigma-star.at>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts 2020-10-14T07:46:21+00:00 Peilin Ye yepeilin.cs@gmail.com 2020-09-24T13:42:22+00:00 d737dd43ab1a1b066ffa930a2ebd9da218701c23 commit 6735b4632def0640dbdf4eb9f99816aca18c4f16 upstream. syzbot has reported an issue in the framebuffer layer, where a malicious user may overflow our built-in font data buffers. In order to perform a reliable range check, subsystems need to know `FONTDATAMAX` for each built-in font. Unfortunately, our font descriptor, `struct console_font` does not contain `FONTDATAMAX`, and is part of the UAPI, making it infeasible to modify it. For user-provided fonts, the framebuffer layer resolves this issue by reserving four extra words at the beginning of data buffers. Later, whenever a function needs to access them, it simply uses the following macros: Recently we have gathered all the above macros to <linux/font.h>. Let us do the same thing for built-in fonts, prepend four extra words (including `FONTDATAMAX`) to their data buffers, so that subsystems can use these macros for all fonts, no matter built-in or user-provided. This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.h". Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/ef18af00c35fb3cc826048a5f70924ed6ddce95b.1600953813.git.yepeilin.cs@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6735b4632def0640dbdf4eb9f99816aca18c4f16 upstream.

syzbot has reported an issue in the framebuffer layer, where a malicious
user may overflow our built-in font data buffers.

In order to perform a reliable range check, subsystems need to know
`FONTDATAMAX` for each built-in font. Unfortunately, our font descriptor,
`struct console_font` does not contain `FONTDATAMAX`, and is part of the
UAPI, making it infeasible to modify it.

For user-provided fonts, the framebuffer layer resolves this issue by
reserving four extra words at the beginning of data buffers. Later,
whenever a function needs to access them, it simply uses the following
macros:

Recently we have gathered all the above macros to <linux/font.h>. Let us
do the same thing for built-in fonts, prepend four extra words (including
`FONTDATAMAX`) to their data buffers, so that subsystems can use these
macros for all fonts, no matter built-in or user-provided.

This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS
macros into linux/font.h".

Cc: stable@vger.kernel.org
Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/ef18af00c35fb3cc826048a5f70924ed6ddce95b.1600953813.git.yepeilin.cs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.h 2020-10-14T07:46:21+00:00 Peilin Ye yepeilin.cs@gmail.com 2020-09-24T13:40:53+00:00 ca308ad621a8f0477140e39a8814d46041c843b8 commit bb0890b4cd7f8203e3aa99c6d0f062d6acdaad27 upstream. drivers/video/console/newport_con.c is borrowing FONT_EXTRA_WORDS macros from drivers/video/fbdev/core/fbcon.h. To keep things simple, move all definitions into <linux/font.h>. Since newport_con now uses four extra words, initialize the fourth word in newport_set_font() properly. Cc: stable@vger.kernel.org Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/7fb8bc9b0abc676ada6b7ac0e0bd443499357267.1600953813.git.yepeilin.cs@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bb0890b4cd7f8203e3aa99c6d0f062d6acdaad27 upstream.

drivers/video/console/newport_con.c is borrowing FONT_EXTRA_WORDS macros
from drivers/video/fbdev/core/fbcon.h. To keep things simple, move all
definitions into <linux/font.h>.

Since newport_con now uses four extra words, initialize the fourth word in
newport_set_font() properly.

Cc: stable@vger.kernel.org
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7fb8bc9b0abc676ada6b7ac0e0bd443499357267.1600953813.git.yepeilin.cs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ata: make qc_prep return ata_completion_errors 2020-10-01T09:11:58+00:00 Jiri Slaby jslaby@suse.cz 2019-10-31T09:59:45+00:00 6002dcd35aa356a3ea79d106f94733e7a298f040 commit 95364f36701e62dd50eee91e1303187fd1a9f567 upstream. In case a driver wants to return an error from qc_prep, return enum ata_completion_errors. sata_mv is one of those drivers -- see the next patch. Other drivers return the newly defined AC_ERR_OK. [v2] use enum ata_completion_errors and AC_ERR_OK. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 95364f36701e62dd50eee91e1303187fd1a9f567 upstream.

In case a driver wants to return an error from qc_prep, return enum
ata_completion_errors. sata_mv is one of those drivers -- see the next
patch. Other drivers return the newly defined AC_ERR_OK.

[v2] use enum ata_completion_errors and AC_ERR_OK.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ata: define AC_ERR_OK 2020-10-01T09:11:58+00:00 Jiri Slaby jslaby@suse.cz 2019-10-31T09:59:44+00:00 1a93281d2568e68c0b193af94c538f8d5d108c30 commit 25937580a5065d6fbd92d9c8ebd47145ad80052e upstream. Since we will return enum ata_completion_errors from qc_prep in the next patch, let's define AC_ERR_OK to mark the OK status. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 25937580a5065d6fbd92d9c8ebd47145ad80052e upstream.

Since we will return enum ata_completion_errors from qc_prep in the next
patch, let's define AC_ERR_OK to mark the OK status.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skbuff: fix a data race in skb_queue_len() 2020-10-01T09:11:52+00:00 Qian Cai cai@lca.pw 2020-02-04T18:40:29+00:00 862495f91f7726cd8cd9f4842c9b5fc9818e8cbd [ Upstream commit 86b18aaa2b5b5bb48e609cd591b3d2d0fdbe0442 ] sk_buff.qlen can be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96: unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821 net/unix/af_unix.c:1761 ____sys_sendmsg+0x33e/0x370 ___sys_sendmsg+0xa6/0xf0 __sys_sendmsg+0x69/0xf0 __x64_sys_sendmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99: __skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029 __skb_try_recv_datagram+0xbe/0x220 unix_dgram_recvmsg+0xee/0x850 ____sys_recvmsg+0x1fb/0x210 ___sys_recvmsg+0xa2/0xf0 __sys_recvmsg+0x66/0xf0 __x64_sys_recvmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe Since only the read is operating as lockless, it could introduce a logic bug in unix_recvq_full() due to the load tearing. Fix it by adding a lockless variant of skb_queue_len() and unix_recvq_full() where READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to the commit d7d16a89350a ("net: add skb_queue_empty_lockless()"). Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 86b18aaa2b5b5bb48e609cd591b3d2d0fdbe0442 ]

sk_buff.qlen can be accessed concurrently as noticed by KCSAN,

 BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg

 read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96:
  unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821
				 net/unix/af_unix.c:1761
  ____sys_sendmsg+0x33e/0x370
  ___sys_sendmsg+0xa6/0xf0
  __sys_sendmsg+0x69/0xf0
  __x64_sys_sendmsg+0x51/0x70
  do_syscall_64+0x91/0xb47
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99:
  __skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029
  __skb_try_recv_datagram+0xbe/0x220
  unix_dgram_recvmsg+0xee/0x850
  ____sys_recvmsg+0x1fb/0x210
  ___sys_recvmsg+0xa2/0xf0
  __sys_recvmsg+0x66/0xf0
  __x64_sys_recvmsg+0x51/0x70
  do_syscall_64+0x91/0xb47
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Since only the read is operating as lockless, it could introduce a logic
bug in unix_recvq_full() due to the load tearing. Fix it by adding
a lockless variant of skb_queue_len() and unix_recvq_full() where
READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to
the commit d7d16a89350a ("net: add skb_queue_empty_lockless()").

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>