linux.git/include, branch v5.15.114

net/mlx5: DR, Check force-loopback RC QP capability independently from RoCE

2023-05-30T12:55:33+00:00

commit c7dd225bc224726c22db08e680bf787f60ebdee3 upstream.

SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB
(loopback), and FL (force-loopback) QP is preferred for performance. FL is
available when RoCE is enabled or disabled based on RoCE caps.
This patch adds reading of FL capability from HCA caps in addition to the
existing reading from RoCE caps, thus fixing the case where we didn't
have loopback enabled when RoCE was disabled.

Fixes: 7304d603a57a ("net/mlx5: DR, Add support for force-loopback QP")
Signed-off-by: Itamar Gozlan 
Signed-off-by: Yevgeny Kliteynik 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Greg Kroah-Hartman

ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg

2023-05-30T12:55:33+00:00

commit 95109657471311601b98e71f03d0244f48dc61bb upstream.

Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is
reserved for 'C7_1' instead.

Fixes: 04afbbbb1cba ("ASoC: Intel: Skylake: Update the topology interface structure")
Signed-off-by: Cezary Rojewski 
Signed-off-by: Amadeusz Sławiński 
Link: https://lore.kernel.org/r/20230519201711.4073845-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

fs: fix undefined behavior in bit shift for SB_NOUSER

2023-05-30T12:55:32+00:00

commit f15afbd34d8fadbd375f1212e97837e32bc170cc upstream.

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. It was spotted by UBSAN.

So let's just fix this by using the BIT() helper for all SB_* flags.

Fixes: e462ec50cb5f ("VFS: Differentiate mount flags (MS_*) from internal superblock flags")
Signed-off-by: Hao Ge 
Message-Id: <20230424051835.374204-1-gehao@kylinos.cn>
[brauner@kernel.org: use BIT() for all SB_* flags]
Signed-off-by: Christian Brauner 
Signed-off-by: Greg Kroah-Hartman

firmware: arm_ffa: Fix FFA device names for logical partitions

2023-05-30T12:55:32+00:00

commit 19b8766459c41c6f318f8a548cc1c66dffd18363 upstream.

Each physical partition can provide multiple services each with UUID.
Each such service can be presented as logical partition with a unique
combination of VM ID and UUID. The number of distinct UUID in a system
will be less than or equal to the number of logical partitions.

However, currently it fails to register more than one logical partition
or service within a physical partition as the device name contains only
VM ID while both VM ID and UUID are maintained in the partition information.
The kernel complains with the below message:

  | sysfs: cannot create duplicate filename '/devices/arm-ffa-8001'
  | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8
  | Hardware name: FVP Base RevC (DT)
  | Call trace:
  |  dump_backtrace+0xf8/0x118
  |  show_stack+0x18/0x24
  |  dump_stack_lvl+0x50/0x68
  |  dump_stack+0x18/0x24
  |  sysfs_create_dir_ns+0xe0/0x13c
  |  kobject_add_internal+0x220/0x3d4
  |  kobject_add+0x94/0x100
  |  device_add+0x144/0x5d8
  |  device_register+0x20/0x30
  |  ffa_device_register+0x88/0xd8
  |  ffa_setup_partitions+0x108/0x1b8
  |  ffa_init+0x2ec/0x3a4
  |  do_one_initcall+0xcc/0x240
  |  do_initcall_level+0x8c/0xac
  |  do_initcalls+0x54/0x94
  |  do_basic_setup+0x1c/0x28
  |  kernel_init_freeable+0x100/0x16c
  |  kernel_init+0x20/0x1a0
  |  ret_from_fork+0x10/0x20
  | kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to
  | register things with the same name in the same directory.
  | arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17
  | ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001

By virtue of being random enough to avoid collisions when generated in a
distributed system, there is no way to compress UUID keys to the number
of bits required to identify each. We can eliminate '-' in the name but
it is not worth eliminating 4 bytes and add unnecessary logic for doing
that. Also v1.0 doesn't provide the UUID of the partitions which makes
it hard to use the same for the device name.

So to keep it simple, let us alloc an ID using ida_alloc() and append the
same to "arm-ffa" to make up a unique device name. Also stash the id value
in ffa_dev to help freeing the ID later when the device is destroyed.

Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Reported-by: Lucian Paul-Trifu 
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-3-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla 
Signed-off-by: Greg Kroah-Hartman

power: supply: bq27xxx: Fix poll_interval handling and races on remove

2023-05-30T12:55:32+00:00

commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream.

Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0
to avoid bq27xxx_battery_update() requeuing the delayed_work item.

There are 2 problems with this:

1. If the driver is unbound through sysfs, rather then the module being
   rmmod-ed, this changes poll_interval unexpectedly

2. This is racy, after it being set poll_interval could be changed
   before bq27xxx_battery_update() checks it through
   /sys/module/bq27xxx_battery/parameters/poll_interval

Fix this by added a removed attribute to struct bq27xxx_device_info and
using that instead of setting poll_interval to 0.

There also is another poll_interval related race on remove(), writing
/sys/module/bq27xxx_battery/parameters/poll_interval will requeue
the delayed_work item for all devices on the bq27xxx_battery_devices
list and the device being removed was only removed from that list
after cancelling the delayed_work item.

Fix this by moving the removal from the bq27xxx_battery_devices list
to before cancelling the delayed_work item.

Fixes: 8cfaaa811894 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver")
Signed-off-by: Hans de Goede 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Greg Kroah-Hartman

USB: core: Add routines for endpoint checks in old drivers

2023-05-30T12:55:31+00:00

commit 13890626501ffda22b18213ddaf7930473da5792 upstream.

Many of the older USB drivers in the Linux USB stack were written
based simply on a vendor's device specification.  They use the
endpoint information in the spec and assume these endpoints will
always be present, with the properties listed, in any device matching
the given vendor and product IDs.

While that may have been true back then, with spoofing and fuzzing it
is not true any more.  More and more we are finding that those old
drivers need to perform at least a minimum of checking before they try
to use any endpoint other than ep0.

To make this checking as simple as possible, we now add a couple of
utility routines to the USB core.  usb_check_bulk_endpoints() and
usb_check_int_endpoints() take an interface pointer together with a
list of endpoint addresses (numbers and directions).  They check that
the interface's current alternate setting includes endpoints with
those addresses and that each of these endpoints has the right type:
bulk or interrupt, respectively.

Although we already have usb_find_common_endpoints() and related
routines meant for a similar purpose, they are not well suited for
this kind of checking.  Those routines find endpoints of various
kinds, but only one (either the first or the last) of each kind, and
they don't verify that the endpoints' addresses agree with what the
caller expects.

In theory the new routines could be more general: They could take a
particular altsetting as their argument instead of always using the
interface's current altsetting.  In practice I think this won't matter
too much; multiple altsettings tend to be used for transferring media
(audio or visual) over isochronous endpoints, not bulk or interrupt.
Drivers for such devices will generally require more sophisticated
checking than these simplistic routines provide.

Signed-off-by: Alan Stern 
Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman

net: fix stack overflow when LRO is disabled for virtual interfaces

2023-05-30T12:55:31+00:00

commit ae9b15fbe63447bc1d3bba3769f409d17ca6fdf6 upstream.

When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.

If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.

But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.

Reproducer:

ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
ip link add team$i master team0 type team
ethtool -K team$i lro on
done

ethtool -K team0 lro off

In order to fix it, the notifier_ctx member of bonding/team is introduced.

Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo
Reviewed-by: Eric Dumazet
Reviewed-by: Nikolay Aleksandrov
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski
Signed-off-by: Greg Kroah-Hartman

usb: gadget: Properly configure the device for remote wakeup

2023-05-30T12:55:29+00:00

[ Upstream commit b93c2a68f3d9dc98ec30dcb342ae47c1c8d09d18 ]

The wakeup bit in the bmAttributes field indicates whether the device
is configured for remote wakeup. But this field should be allowed to
set only if the UDC supports such wakeup mechanism. So configure this
field based on UDC capability. Also inform the UDC whether the device
is configured for remote wakeup by implementing a gadget op.

Reviewed-by: Thinh Nguyen 
Signed-off-by: Elson Roy Serrao 
Link: https://lore.kernel.org/r/1679694482-16430-2-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman 
Stable-dep-of: 4e8ef34e36f2 ("usb: dwc3: fix gadget mode suspend interrupt handler issue")
Signed-off-by: Sasha Levin

SUNRPC: always free ctxt when freeing deferred request

2023-05-24T16:36:51+00:00

[ Upstream commit 948f072ada23e0a504c5e4d7d71d4c83bd0785ec ]

Since the ->xprt_ctxt pointer was added to svc_deferred_req, it has not
been sufficient to use kfree() to free a deferred request.  We may need
to free the ctxt as well.

As freeing the ctxt is all that ->xpo_release_rqst() does, we repurpose
it to explicit do that even when the ctxt is not stored in an rqst.
So we now have ->xpo_release_ctxt() which is given an xprt and a ctxt,
which may have been taken either from an rqst or from a dreq.  The
caller is now responsible for clearing that pointer after the call to
->xpo_release_ctxt.

We also clear dr->xprt_ctxt when the ctxt is moved into a new rqst when
revisiting a deferred request.  This ensures there is only one pointer
to the ctxt, so the risk of double freeing in future is reduced.  The
new code in svc_xprt_release which releases both the ctxt and any
rq_deferred depends on this.

Fixes: 773f91b2cf3f ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown 
Reviewed-by: Jeff Layton 
Signed-off-by: Chuck Lever 
Signed-off-by: Sasha Levin

SUNRPC: Remove svc_rqst::rq_xprt_hlen

2023-05-24T16:36:50+00:00

[ Upstream commit 983084b2672c593959e3148d6a17c8b920797dde ]

Clean up: This field is now always set to zero.

Signed-off-by: Chuck Lever 
Stable-dep-of: 948f072ada23 ("SUNRPC: always free ctxt when freeing deferred request")
Signed-off-by: Sasha Levin