linux.git/include, branch v5.16.1

Bluetooth: add quirk disabling LE Read Transmit Power

2022-01-16T08:11:13+00:00

commit d2f8114f9574509580a8506d2ef72e7e43d1a5bd upstream.

Some devices have a bug causing them to not work if they query
LE tx power on startup. Thus we add a quirk in order to not query it
and default min/max tx power values to HCI_TX_POWER_INVALID.

Signed-off-by: Aditya Garg 
Reported-by: Orlando Chamberlain 
Tested-by: Orlando Chamberlain 
Link:
https://lore.kernel.org/r/4970a940-211b-25d6-edab-21a815313954@protonmail.com
Fixes: 7c395ea521e6 ("Bluetooth: Query LE tx power on startup")
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm

2022-01-07T17:17:53+00:00

Pull drm fixes from Dave Airlie:
 "There is only the amdgpu runtime pm regression fix in here:

  amdgpu:

   - suspend/resume fix

   - fix runtime PM regression"

* tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: disable runpm if we are the primary adapter
  fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb
  drm/amd/pm: keep the BACO feature enabled for suspend

Merge tag 'amd-drm-fixes-5.16-2021-12-31' of ssh://gitlab.freedesktop.org/agd5f/linux into drm-fixes

2022-01-06T20:46:08+00:00

amd-drm-fixes-5.16-2021-12-31:

amdgpu:
- Suspend/resume fix
- Restore runtime pm behavior with efifb

Signed-off-by: Dave Airlie 
From: Alex Deucher 
Link: https://patchwork.freedesktop.org/patch/msgid/20211231143825.11479-1-alexander.deucher@amd.com

Merge tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-01-05T22:08:56+00:00

Pull networking fixes from Jakub Kicinski"
 "Networking fixes, including fixes from bpf, and WiFi. One last pull
  request, turns out some of the recent fixes did more harm than good.

  Current release - regressions:

   - Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
     problem worse

   - Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
     __fixed_phy_register", broke EPROBE_DEFER handling

   - Revert "net: usb: r8152: Add MAC pass-through support for more
     Lenovo Docks", broke setups without a Lenovo dock

  Current release - new code bugs:

   - selftests: set amt.sh executable

  Previous releases - regressions:

   - batman-adv: mcast: don't send link-local multicast to mcast routers

  Previous releases - always broken:

   - ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY

   - sctp: hold endpoint before calling cb in
     sctp_transport_lookup_process

   - mac80211: mesh: embed mesh_paths and mpp_paths into
     ieee80211_if_mesh to avoid complicated handling of sub-object
     allocation failures

   - seg6: fix traceroute in the presence of SRv6

   - tipc: fix a kernel-infoleak in __tipc_sendmsg()"

* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
  selftests: set amt.sh executable
  Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
  sfc: The RX page_ring is optional
  iavf: Fix limit of total number of queues to active queues of VF
  i40e: Fix incorrect netdev's real number of RX/TX queues
  i40e: Fix for displaying message regarding NVM version
  i40e: fix use-after-free in i40e_sync_filters_subtask()
  i40e: Fix to not show opcode msg on unsuccessful VF MAC change
  ieee802154: atusb: fix uninit value in atusb_set_extended_addr
  mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
  mac80211: initialize variable have_higher_than_11mbit
  sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
  netrom: fix copying in user data in nr_setsockopt
  udp6: Use Segment Routing Header for dest address if present
  icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
  seg6: export get_srh() for ICMP handling
  Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
  ipv6: Do cleanup if attribute validation fails in multipath route
  ipv6: Continue processing multipath route even if gateway attribute is invalid
  net/fsl: Remove leftover definition in xgmac_mdio
  ...

udp6: Use Segment Routing Header for dest address if present

2022-01-04T12:17:35+00:00

When finding the socket to report an error on, if the invoking packet
is using Segment Routing, the IPv6 destination address is that of an
intermediate router, not the end destination. Extract the ultimate
destination address from the segment address.

This change allows traceroute to function in the presence of Segment
Routing.

Signed-off-by: Andrew Lunn 
Reviewed-by: David Ahern 
Reviewed-by: Willem de Bruijn 
Signed-off-by: David S. Miller

icmp: ICMPV6: Examine invoking packet for Segment Route Headers.

2022-01-04T12:17:35+00:00

RFC8754 says:

ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain.  The invoking packet in the ICMP error
message may contain an SRH.  Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.

For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required.  The following logic is used to determine the destination
address for use by protocol-error handlers.

*  Walk all extension headers of the invoking IPv6 packet to the
   routing extension header preceding the upper-layer header.

   -  If routing header is type 4 Segment Routing Header (SRH)

      o  The SID at Segment List[0] may be used as the destination
         address of the invoking packet.

Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.

Signed-off-by: Andrew Lunn 
Reviewed-by: David Ahern 
Reviewed-by: Willem de Bruijn 
Signed-off-by: David S. Miller

seg6: export get_srh() for ICMP handling

2022-01-04T12:17:35+00:00

An ICMP error message can contain in its message body part of an IPv6
packet which invoked the error. Such a packet might contain a segment
router header. Export get_srh() so the ICMP code can make use of it.

Since his changes the scope of the function from local to global, add
the seg6_ prefix to keep the namespace clean. And move it into seg6.c
so it is always available, not just when IPV6_SEG6_LWTUNNEL is
enabled.

Signed-off-by: Andrew Lunn 
Reviewed-by: David Ahern 
Reviewed-by: Willem de Bruijn 
Signed-off-by: David S. Miller

sctp: hold endpoint before calling cb in sctp_transport_lookup_process

2022-01-02T12:46:41+00:00

The same fix in commit 5ec7d18d1813 ("sctp: use call_rcu to free endpoint")
is also needed for dumping one asoc and sock after the lookup.

Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump")
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

mm: vmscan: Reduce throttling due to a failure to make progress

2021-12-31T19:17:07+00:00

Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar
problems due to reclaim throttling for excessive lengths of time. In
Alexey's case, a memory hog that should go OOM quickly stalls for
several minutes before stalling. In Mike and Darrick's cases, a small
memcg environment stalled excessively even though the system had enough
memory overall.

Commit 69392a403f49 ("mm/vmscan: throttle reclaim when no progress is
being made") introduced the problem although commit a19594ca4a8b
("mm/vmscan: increase the timeout if page reclaim is not making
progress") made it worse. Systems at or near an OOM state that cannot
be recovered must reach OOM quickly and memcg should kill tasks if a
memcg is near OOM.

To address this, only stall for the first zone in the zonelist, reduce
the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if
the scan control nr_reclaimed is 0, kswapd is still active and there
were excessive pages pending for writeback. If kswapd has stopped
reclaiming due to excessive failures, do not stall at all so that OOM
triggers relatively quickly. Similarly, if an LRU is simply congested,
only lightly throttle similar to NOPROGRESS.

Alexey's original case was the most straight forward

for i in {1..3}; do tail /dev/zero; done

On vanilla 5.16-rc1, this test stalled heavily, after the patch the test
completes in a few seconds similar to 5.15.

Alexey's second test case added watching a youtube video while tail runs
10 times. On 5.15, playback only jitters slightly, 5.16-rc1 stalls a
lot with lots of frames missing and numerous audio glitches. With this
patch applies, the video plays similarly to 5.15.

[lkp@intel.com: Fix W=1 build warning]

Link: https://lore.kernel.org/r/99e779783d6c7fce96448a3402061b9dc1b3b602.camel@gmx.de
Link: https://lore.kernel.org/r/20211124011954.7cab9bb4@mail.inbox.lv
Link: https://lore.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lore.kernel.org/r/20211202150614.22440-1-mgorman@techsingularity.net
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/20211124011954.7cab9bb4@mail.inbox.lv/
Reported-and-tested-by: Alexey Avramov
Reported-and-tested-by: Mike Galbraith
Reported-and-tested-by: Darrick J. Wong
Reported-by: kernel test robot
Acked-by: Hugh Dickins
Tracked-by: Thorsten Leemhuis
Fixes: 69392a403f49 ("mm/vmscan: throttle reclaim when no progress is being made")
Signed-off-by: Mel Gorman
Signed-off-by: Linus Torvalds

fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb

2021-12-31T13:57:45+00:00

Add a function for drivers to check if the a firmware initialized
fb is corresponds to their aperture.  This allows drivers to check if the
device corresponds to what the firmware set up as the display device.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215203
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1840
Signed-off-by: Alex Deucher