linux.git/kernel/bpf/cgroup.c, branch v6.18.22

bpf: WQ_PERCPU added to alloc_workqueue users

2025-09-08T17:04:37+00:00

Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.

alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.

This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.

This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.

This patch adds a new WQ_PERCPU flag to explicitly request the use of
the per-CPU behavior. Both flags coexist for one release cycle to allow
callers to transition their calls.

Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.

With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.

All existing users have been updated accordingly.

Suggested-by: Tejun Heo 
Signed-off-by: Marco Crivellari 
Link: https://lore.kernel.org/r/20250905085309.94596-4-marco.crivellari@suse.com
Signed-off-by: Alexei Starovoitov

bpf: replace use of system_wq with system_percpu_wq

2025-09-08T17:04:37+00:00

Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.

This lack of consistentcy cannot be addressed without refactoring the API.

system_wq is a per-CPU worqueue, yet nothing in its name tells about that
CPU affinity constraint, which is very often not required by users. Make
it clear by adding a system_percpu_wq.

queue_work() / queue_delayed_work() mod_delayed_work() will now use the
new per-cpu wq: whether the user still stick on the old name a warn will
be printed along a wq redirect to the new one.

This patch add the new system_percpu_wq except for mm, fs and net
subsystem, whom are handled in separated patches.

The old wq will be kept for a few release cylces.

Suggested-by: Tejun Heo 
Signed-off-by: Marco Crivellari 
Link: https://lore.kernel.org/r/20250905085309.94596-2-marco.crivellari@suse.com
Signed-off-by: Alexei Starovoitov

bpf: use rcu_read_lock_dont_migrate() for bpf_prog_run_array_cg()

2025-08-26T01:52:16+00:00

Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
bpf_prog_run_array_cg to obtain better performance when PREEMPT_RCU is
not enabled.

Signed-off-by: Menglong Dong 
Link: https://lore.kernel.org/r/20250821090609.42508-7-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov

Merge tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2025-07-30T16:58:50+00:00

Pull bpf updates from Alexei Starovoitov:

 - Remove usermode driver (UMD) framework (Thomas Weißschuh)

 - Introduce Strongly Connected Component (SCC) in the verifier to
   detect loops and refine register liveness (Eduard Zingerman)

 - Allow 'void *' cast using bpf_rdonly_cast() and corresponding
   '__arg_untrusted' for global function parameters (Eduard Zingerman)

 - Improve precision for BPF_ADD and BPF_SUB operations in the verifier
   (Harishankar Vishwanathan)

 - Teach the verifier that constant pointer to a map cannot be NULL
   (Ihor Solodrai)

 - Introduce BPF streams for error reporting of various conditions
   detected by BPF runtime (Kumar Kartikeya Dwivedi)

 - Teach the verifier to insert runtime speculation barrier (lfence on
   x86) to mitigate speculative execution instead of rejecting the
   programs (Luis Gerhorst)

 - Various improvements for 'veristat' (Mykyta Yatsenko)

 - For CONFIG_DEBUG_KERNEL config warn on internal verifier errors to
   improve bug detection by syzbot (Paul Chaignon)

 - Support BPF private stack on arm64 (Puranjay Mohan)

 - Introduce bpf_cgroup_read_xattr() kfunc to read xattr of cgroup's
   node (Song Liu)

 - Introduce kfuncs for read-only string opreations (Viktor Malik)

 - Implement show_fdinfo() for bpf_links (Tao Chen)

 - Reduce verifier's stack consumption (Yonghong Song)

 - Implement mprog API for cgroup-bpf programs (Yonghong Song)

* tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (192 commits)
  selftests/bpf: Migrate fexit_noreturns case into tracing_failure test suite
  selftests/bpf: Add selftest for attaching tracing programs to functions in deny list
  bpf: Add log for attaching tracing programs to functions in deny list
  bpf: Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions
  bpf: Fix various typos in verifier.c comments
  bpf: Add third round of bounds deduction
  selftests/bpf: Test invariants on JSLT crossing sign
  selftests/bpf: Test cross-sign 64bits range refinement
  selftests/bpf: Update reg_bound range refinement logic
  bpf: Improve bounds when s64 crosses sign boundary
  bpf: Simplify bounds refinement from s32
  selftests/bpf: Enable private stack tests for arm64
  bpf, arm64: JIT support for private stack
  bpf: Move bpf_jit_get_prog_name() to core.c
  bpf, arm64: Fix fp initialization for exception boundary
  umd: Remove usermode driver framework
  bpf/preload: Don't select USERMODE_DRIVER
  selftests/bpf: Fix test dynptr/test_dynptr_memset_xdp_chunks failure
  selftests/bpf: Fix test dynptr/test_dynptr_copy_xdp failure
  selftests/bpf: Increase xdp data size for arm64 64K page size
  ...

bpf: Reject narrower access to pointer ctx fields

2025-07-24T02:33:49+00:00

The following BPF program, simplified from a syzkaller repro, causes a
kernel warning:

    r0 = *(u8 *)(r1 + 169);
    exit;

With pointer field sk being at offset 168 in __sk_buff. This access is
detected as a narrower read in bpf_skb_is_valid_access because it
doesn't match offsetof(struct __sk_buff, sk). It is therefore allowed
and later proceeds to bpf_convert_ctx_access. Note that for the
"is_narrower_load" case in the convert_ctx_accesses(), the insn->off
is aligned, so the cnt may not be 0 because it matches the
offsetof(struct __sk_buff, sk) in the bpf_convert_ctx_access. However,
the target_size stays 0 and the verifier errors with a kernel warning:

    verifier bug: error during ctx access conversion(1)

This patch fixes that to return a proper "invalid bpf_context access
off=X size=Y" error on the load instruction.

The same issue affects multiple other fields in context structures that
allow narrow access. Some other non-affected fields (for sk_msg,
sk_lookup, and sockopt) were also changed to use bpf_ctx_range_ptr for
consistency.

Note this syzkaller crash was reported in the "Closes" link below, which
used to be about a different bug, fixed in
commit fce7bd8e385a ("bpf/verifier: Handle BPF_LOAD_ACQ instructions
in insn_def_regno()"). Because syzbot somehow confused the two bugs,
the new crash and repro didn't get reported to the mailing list.

Fixes: f96da09473b52 ("bpf: simplify narrower ctx access")
Fixes: 0df1a55afa832 ("bpf: Warn on internal verifier errors")
Reported-by: syzbot+0ef84a7bdf5301d4cbec@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0ef84a7bdf5301d4cbec
Signed-off-by: Paul Chaignon 
Signed-off-by: Martin KaFai Lau 
Acked-by: Eduard Zingerman 
Link: https://patch.msgid.link/3b8dcee67ff4296903351a974ddd9c4dca768b64.1753194596.git.paul.chaignon@gmail.com

bpf: Use ERR_CAST instead of ERR_PTR(PTR_ERR(...))

2025-07-22T00:27:09+00:00

Intel linux test robot reported a warning that ERR_CAST can be used
for error pointer casting instead of more-complicated/rarely-used
ERR_PTR(PTR_ERR(...)) style.

There is no functionality change, but still let us replace two such
instances as it improves consistency and readability.

Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202507201048.bceHy8zX-lkp@intel.com/
Signed-off-by: Yonghong Song 
Signed-off-by: Martin KaFai Lau 
Acked-by: Eduard Zingerman 
Link: https://patch.msgid.link/20250720164754.3999140-1-yonghong.song@linux.dev

bpf: Remove attach_type in bpf_cgroup_link

2025-07-11T17:51:55+00:00

Use attach_type in bpf_link, and remove it in bpf_cgroup_link.

Signed-off-by: Tao Chen 
Signed-off-by: Andrii Nakryiko 
Acked-by: Daniel Borkmann 
Acked-by: Jiri Olsa 
Link: https://lore.kernel.org/bpf/20250710032038.888700-3-chen.dylane@linux.dev

bpf: Add attach_type field to bpf_link

2025-07-11T17:51:55+00:00

Attach_type will be set when a link is created by user. It is better to
record attach_type in bpf_link generically and have it available
universally for all link types. So add the attach_type field in bpf_link
and move the sleepable field to avoid unnecessary gap padding.

Signed-off-by: Tao Chen 
Signed-off-by: Andrii Nakryiko 
Acked-by: Daniel Borkmann 
Acked-by: Jiri Olsa 
Link: https://lore.kernel.org/bpf/20250710032038.888700-2-chen.dylane@linux.dev

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc3

2025-06-26T16:49:39+00:00

Cross-merge BPF, perf and other fixes after downstream PRs.
It restores BPF CI to green after critical fix
commit bc4394e5e79c ("perf: Fix the throttle error of some clock events")

No conflicts.

Signed-off-by: Alexei Starovoitov

bpf: Specify access type of bpf_sysctl_get_name args

2025-06-24T04:50:44+00:00

The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype.

Until commit 37cce22dbd51a ("bpf: verifier: Refactor helper access
type tracking"), all helper accesses were considered as a possible
write access by the verifier, so no big harm was done. However, since
then, the verifier might make wrong asssumption about the content of
that address which might lead it to make faulty optimizations (such as
removing code that was wrongly labeled dead). This is what happens in
test_sysctl selftest to the tests related to sysctl_get_name.

Add MEM_WRITE flag the second argument of bpf_sysctl_get_name().

Signed-off-by: Jerome Marchand 
Acked-by: Yonghong Song 
Link: https://lore.kernel.org/r/20250619140603.148942-2-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov