linux.git/kernel/bpf/verifier.c, branch v4.18.19

bpf/verifier: fix verifier instability

2018-11-13T19:12:25+00:00

[ Upstream commit a9c676bc8fc58d00eea9836fb14ee43c0346416a ]

Edward Cree says:
In check_mem_access(), for the PTR_TO_CTX case, after check_ctx_access()
has supplied a reg_type, the other members of the register state are set
appropriately.  Previously reg.range was set to 0, but as it is in a
union with reg.map_ptr, which is larger, upper bytes of the latter were
left in place.  This then caused the memcmp() in regsafe() to fail,
preventing some branches from being pruned (and occasionally causing the
same program to take a varying number of processed insns on repeated
verifier runs).

Fix the instability by clearing bpf_reg_state in __mark_reg_[un]known()

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Debugged-by: Edward Cree 
Acked-by: Edward Cree 
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

bpf: fix partial copy of map_ptr when dst is scalar

2018-11-10T15:49:45+00:00

commit 0962590e553331db2cc0aef2dc35c57f6300dbbe upstream.

ALU operations on pointers such as scalar_reg += map_value_ptr are
handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr
and range in the register state share a union, so transferring state
through dst_reg->range = ptr_reg->range is just buggy as any new
map_ptr in the dst_reg is then truncated (or null) for subsequent
checks. Fix this by adding a raw member and use it for copying state
over to dst_reg.

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: Daniel Borkmann 
Cc: Edward Cree 
Acked-by: Alexei Starovoitov 
Signed-off-by: Alexei Starovoitov 
Acked-by: Edward Cree 
Signed-off-by: Sasha Levin

bpf: 32-bit RSH verification must truncate input before the ALU op

2018-10-10T06:55:58+00:00

commit b799207e1e1816b09e7a5920fbb2d5fcf6edd681 upstream.

When I wrote commit 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification"), I
assumed that, in order to emulate 64-bit arithmetic with 32-bit logic, it
is sufficient to just truncate the output to 32 bits; and so I just moved
the register size coercion that used to be at the start of the function to
the end of the function.

That assumption is true for almost every op, but not for 32-bit right
shifts, because those can propagate information towards the least
significant bit. Fix it by always truncating inputs for 32-bit ops to 32
bits.

Also get rid of the coerce_reg_to_size() after the ALU op, since that has
no effect.

Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification")
Acked-by: Daniel Borkmann 
Signed-off-by: Jann Horn 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Greg Kroah-Hartman

bpf/verifier: disallow pointer subtraction

2018-09-29T09:55:57+00:00

commit dd066823db2ac4e22f721ec85190817b58059a54 upstream.

Subtraction of pointers was accidentally allowed for unpriv programs
by commit 82abbf8d2fc4. Revert that part of commit.

Fixes: 82abbf8d2fc4 ("bpf: do not allow root to mangle valid pointers")
Reported-by: Jann Horn 
Acked-by: Daniel Borkmann 
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Greg Kroah-Hartman

bpf: don't leave partial mangled prog in jit_subprogs error path

2018-07-12T21:00:54+00:00

syzkaller managed to trigger the following bug through fault injection:

  [...]
  [  141.043668] verifier bug. No program starts at insn 3
  [  141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613
                 get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline]
  [  141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613
                 fixup_call_args kernel/bpf/verifier.c:5587 [inline]
  [  141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613
                 bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952
  [  141.047355] CPU: 3 PID: 4072 Comm: a.out Not tainted 4.18.0-rc4+ #51
  [  141.048446] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS 1.10.2-1 04/01/2014
  [  141.049877] Call Trace:
  [  141.050324]  __dump_stack lib/dump_stack.c:77 [inline]
  [  141.050324]  dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
  [  141.050950]  ? dump_stack_print_info.cold.2+0x52/0x52 lib/dump_stack.c:60
  [  141.051837]  panic+0x238/0x4e7 kernel/panic.c:184
  [  141.052386]  ? add_taint.cold.5+0x16/0x16 kernel/panic.c:385
  [  141.053101]  ? __warn.cold.8+0x148/0x1ba kernel/panic.c:537
  [  141.053814]  ? __warn.cold.8+0x117/0x1ba kernel/panic.c:530
  [  141.054506]  ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline]
  [  141.054506]  ? fixup_call_args kernel/bpf/verifier.c:5587 [inline]
  [  141.054506]  ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952
  [  141.055163]  __warn.cold.8+0x163/0x1ba kernel/panic.c:538
  [  141.055820]  ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline]
  [  141.055820]  ? fixup_call_args kernel/bpf/verifier.c:5587 [inline]
  [  141.055820]  ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952
  [...]

What happens in jit_subprogs() is that kcalloc() for the subprog func
buffer is failing with NULL where we then bail out. Latter is a plain
return -ENOMEM, and this is definitely not okay since earlier in the
loop we are walking all subprogs and temporarily rewrite insn->off to
remember the subprog id as well as insn->imm to temporarily point the
call to __bpf_call_base + 1 for the initial JIT pass. Thus, bailing
out in such state and handing this over to the interpreter is troublesome
since later/subsequent e.g. find_subprog() lookups are based on wrong
insn->imm.

Therefore, once we hit this point, we need to jump to out_free path
where we undo all changes from earlier loop, so that interpreter can
work on unmodified insn->{off,imm}.

Another point is that should find_subprog() fail in jit_subprogs() due
to a verifier bug, then we also should not simply defer the program to
the interpreter since also here we did partial modifications. Instead
we should just bail out entirely and return an error to the user who is
trying to load the program.

Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs")
Reported-by: syzbot+7d427828b2ea6e592804@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann 
Signed-off-by: Alexei Starovoitov

treewide: Use array_size() in vzalloc()

2018-06-12T23:19:22+00:00

The vzalloc() function has no 2-factor argument form, so multiplication
factors need to be wrapped in array_size(). This patch replaces cases of:

        vzalloc(a * b)

with:
        vzalloc(array_size(a, b))

as well as handling cases of:

        vzalloc(a * b * c)

with:

        vzalloc(array3_size(a, b, c))

This does, however, attempt to ignore constant size factors like:

        vzalloc(4 * 1024)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  vzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  vzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  vzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
  vzalloc(
-	sizeof(TYPE) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT_ID
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT_ID
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

  vzalloc(
-	SIZE * COUNT
+	array_size(COUNT, SIZE)
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  vzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  vzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  vzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  vzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  vzalloc(C1 * C2 * C3, ...)
|
  vzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants.
@@
expression E1, E2;
constant C1, C2;
@@

(
  vzalloc(C1 * C2, ...)
|
  vzalloc(
-	E1 * E2
+	array_size(E1, E2)
  , ...)
)

Signed-off-by: Kees Cook

treewide: kzalloc() -> kcalloc()

2018-06-12T23:19:22+00:00

The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook

bpf: reject passing modified ctx to helper functions

2018-06-07T19:37:17+00:00

As commit 28e33f9d78ee ("bpf: disallow arithmetic operations on
context pointer") already describes, f1174f77b50c ("bpf/verifier:
rework value tracking") removed the specific white-listed cases
we had previously where we would allow for pointer arithmetic in
order to further generalize it, and allow e.g. context access via
modified registers. While the dereferencing of modified context
pointers had been forbidden through 28e33f9d78ee, syzkaller did
recently manage to trigger several KASAN splats for slab out of
bounds access and use after frees by simply passing a modified
context pointer to a helper function which would then do the bad
access since verifier allowed it in adjust_ptr_min_max_vals().

Rejecting arithmetic on ctx pointer in adjust_ptr_min_max_vals()
generally could break existing programs as there's a valid use
case in tracing in combination with passing the ctx to helpers as
bpf_probe_read(), where the register then becomes unknown at
verification time due to adding a non-constant offset to it. An
access sequence may look like the following:

  offset = args->filename;  /* field __data_loc filename */
  bpf_probe_read(&dst, len, (char *)args + offset); // args is ctx

There are two options: i) we could special case the ctx and as
soon as we add a constant or bounded offset to it (hence ctx type
wouldn't change) we could turn the ctx into an unknown scalar, or
ii) we generalize the sanity test for ctx member access into a
small helper and assert it on the ctx register that was passed
as a function argument. Fwiw, latter is more obvious and less
complex at the same time, and one case that may potentially be
legitimate in future for ctx member access at least would be for
ctx to carry a const offset. Therefore, fix follows approach
from ii) and adds test cases to BPF kselftests.

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Reported-by: syzbot+3d0b2441dbb71751615e@syzkaller.appspotmail.com
Reported-by: syzbot+c8504affd4fdd0c1b626@syzkaller.appspotmail.com
Reported-by: syzbot+e5190cb881d8660fb1a3@syzkaller.appspotmail.com
Reported-by: syzbot+efae31b384d5badbd620@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann 
Acked-by: Alexei Starovoitov 
Acked-by: Yonghong Song 
Acked-by: Edward Cree 
Signed-off-by: Alexei Starovoitov

bpf: fix context access in tracing progs on 32 bit archs

2018-06-03T14:46:56+00:00

Wang reported that all the testcases for BPF_PROG_TYPE_PERF_EVENT
program type in test_verifier report the following errors on x86_32:

  172/p unpriv: spill/fill of different pointers ldx FAIL
  Unexpected error message!
  0: (bf) r6 = r10
  1: (07) r6 += -8
  2: (15) if r1 == 0x0 goto pc+3
  R1=ctx(id=0,off=0,imm=0) R6=fp-8,call_-1 R10=fp0,call_-1
  3: (bf) r2 = r10
  4: (07) r2 += -76
  5: (7b) *(u64 *)(r6 +0) = r2
  6: (55) if r1 != 0x0 goto pc+1
  R1=ctx(id=0,off=0,imm=0) R2=fp-76,call_-1 R6=fp-8,call_-1 R10=fp0,call_-1 fp-8=fp
  7: (7b) *(u64 *)(r6 +0) = r1
  8: (79) r1 = *(u64 *)(r6 +0)
  9: (79) r1 = *(u64 *)(r1 +68)
  invalid bpf_context access off=68 size=8

  378/p check bpf_perf_event_data->sample_period byte load permitted FAIL
  Failed to load prog 'Permission denied'!
  0: (b7) r0 = 0
  1: (71) r0 = *(u8 *)(r1 +68)
  invalid bpf_context access off=68 size=1

  379/p check bpf_perf_event_data->sample_period half load permitted FAIL
  Failed to load prog 'Permission denied'!
  0: (b7) r0 = 0
  1: (69) r0 = *(u16 *)(r1 +68)
  invalid bpf_context access off=68 size=2

  380/p check bpf_perf_event_data->sample_period word load permitted FAIL
  Failed to load prog 'Permission denied'!
  0: (b7) r0 = 0
  1: (61) r0 = *(u32 *)(r1 +68)
  invalid bpf_context access off=68 size=4

  381/p check bpf_perf_event_data->sample_period dword load permitted FAIL
  Failed to load prog 'Permission denied'!
  0: (b7) r0 = 0
  1: (79) r0 = *(u64 *)(r1 +68)
  invalid bpf_context access off=68 size=8

Reason is that struct pt_regs on x86_32 doesn't fully align to 8 byte
boundary due to its size of 68 bytes. Therefore, bpf_ctx_narrow_access_ok()
will then bail out saying that off & (size_default - 1) which is 68 & 7
doesn't cleanly align in the case of sample_period access from struct
bpf_perf_event_data, hence verifier wrongly thinks we might be doing an
unaligned access here though underlying arch can handle it just fine.
Therefore adjust this down to machine size and check and rewrite the
offset for narrow access on that basis. We also need to fix corresponding
pe_prog_is_valid_access(), since we hit the check for off % size != 0
(e.g. 68 % 8 -> 4) in the first and last test. With that in place, progs
for tracing work on x86_32.

Reported-by: Wang YanQing 
Signed-off-by: Daniel Borkmann 
Acked-by: Alexei Starovoitov 
Tested-by: Wang YanQing 
Signed-off-by: Alexei Starovoitov

bpf: avoid retpoline for lookup/update/delete calls on maps

2018-06-03T14:45:37+00:00

While some of the BPF map lookup helpers provide a ->map_gen_lookup()
callback for inlining the map lookup altogether it is not available
for every map, so the remaining ones have to call bpf_map_lookup_elem()
helper which does a dispatch to map->ops->map_lookup_elem(). In
times of retpolines, this will control and trap speculative execution
rather than letting it do its work for the indirect call and will
therefore cause a slowdown. Likewise, bpf_map_update_elem() and
bpf_map_delete_elem() do not have an inlined version and need to call
into their map->ops->map_update_elem() resp. map->ops->map_delete_elem()
handlers.

Before:

  # bpftool prog dump xlated id 1
    0: (bf) r2 = r10
    1: (07) r2 += -8
    2: (7a) *(u64 *)(r2 +0) = 0
    3: (18) r1 = map[id:1]
    5: (85) call __htab_map_lookup_elem#232656
    6: (15) if r0 == 0x0 goto pc+4
    7: (71) r1 = *(u8 *)(r0 +35)
    8: (55) if r1 != 0x0 goto pc+1
    9: (72) *(u8 *)(r0 +35) = 1
   10: (07) r0 += 56
   11: (15) if r0 == 0x0 goto pc+4
   12: (bf) r2 = r0
   13: (18) r1 = map[id:1]
   15: (85) call bpf_map_delete_elem#215008  <-- indirect call via
   16: (95) exit                                 helper

After:

  # bpftool prog dump xlated id 1
    0: (bf) r2 = r10
    1: (07) r2 += -8
    2: (7a) *(u64 *)(r2 +0) = 0
    3: (18) r1 = map[id:1]
    5: (85) call __htab_map_lookup_elem#233328
    6: (15) if r0 == 0x0 goto pc+4
    7: (71) r1 = *(u8 *)(r0 +35)
    8: (55) if r1 != 0x0 goto pc+1
    9: (72) *(u8 *)(r0 +35) = 1
   10: (07) r0 += 56
   11: (15) if r0 == 0x0 goto pc+4
   12: (bf) r2 = r0
   13: (18) r1 = map[id:1]
   15: (85) call htab_lru_map_delete_elem#238240  <-- direct call
   16: (95) exit

In all three lookup/update/delete cases however we can use the actual
address of the map callback directly if we find that there's only a
single path with a map pointer leading to the helper call, meaning
when the map pointer has not been poisoned from verifier side.
Example code can be seen above for the delete case.

Signed-off-by: Daniel Borkmann 
Acked-by: Alexei Starovoitov 
Acked-by: Song Liu 
Signed-off-by: Alexei Starovoitov