commit 983695fa676568fc0fe5ddd995c7267aabc24632 upstream.

Intention of cgroup bind/connect/sendmsg BPF hooks is to act transparently
to applications as also stated in original motivation in 7828f20e3779 ("Merge
branch 'bpf-cgroup-bind-connect'"). When recently integrating the latter
two hooks into Cilium to enable host based load-balancing with Kubernetes,
I ran into the issue that pods couldn't start up as DNS got broken. Kubernetes
typically sets up DNS as a service and is thus subject to load-balancing.

Upon further debugging, it turns out that the cgroupv2 sendmsg BPF hooks API
is currently insufficient and thus not usable as-is for standard applications
shipped with most distros. To break down the issue we ran into with a simple
example:

  # cat /etc/resolv.conf
  nameserver 147.75.207.207
  nameserver 147.75.207.208

For the purpose of a simple test, we set up above IPs as service IPs and
transparently redirect traffic to a different DNS backend server for that
node:

  # cilium service list
  ID   Frontend            Backend
  1    147.75.207.207:53   1 => 8.8.8.8:53
  2    147.75.207.208:53   1 => 8.8.8.8:53

The attached BPF program is basically selecting one of the backends if the
service IP/port matches on the cgroup hook. DNS breaks here, because the
hooks are not transparent enough to applications which have built-in msg_name
address checks:

  # nslookup 1.1.1.1
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  [...]
  ;; connection timed out; no servers could be reached

  # dig 1.1.1.1
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  [...]

  ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
  ;; global options: +cmd
  ;; connection timed out; no servers could be reached

For comparison, if none of the service IPs is used, and we tell nslookup
to use 8.8.8.8 directly it works just fine, of course:

  # nslookup 1.1.1.1 8.8.8.8
  1.1.1.1.in-addr.arpa	name = one.one.one.one.

In order to fix this and thus act more transparent to the application,
this needs reverse translation on recvmsg() side. A minimal fix for this
API is to add similar recvmsg() hooks behind the BPF cgroups static key
such that the program can track state and replace the current sockaddr_in{,6}
with the original service IP. From BPF side, this basically tracks the
service tuple plus socket cookie in an LRU map where the reverse NAT can
then be retrieved via map value as one example. Side-note: the BPF cgroups
static key should be converted to a per-hook static key in future.

Same example after this fix:

  # cilium service list
  ID   Frontend            Backend
  1    147.75.207.207:53   1 => 8.8.8.8:53
  2    147.75.207.208:53   1 => 8.8.8.8:53

Lookups work fine now:

  # nslookup 1.1.1.1
  1.1.1.1.in-addr.arpa    name = one.one.one.one.

  Authoritative answers can be found from:

  # dig 1.1.1.1

  ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
  ;; global options: +cmd
  ;; Got answer:
  ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 51550
  ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1

  ;; OPT PSEUDOSECTION:
  ; EDNS: version: 0, flags:; udp: 512
  ;; QUESTION SECTION:
  ;1.1.1.1.                       IN      A

  ;; AUTHORITY SECTION:
  .                       23426   IN      SOA     a.root-servers.net. nstld.verisign-grs.com. 2019052001 1800 900 604800 86400

  ;; Query time: 17 msec
  ;; SERVER: 147.75.207.207#53(147.75.207.207)
  ;; WHEN: Tue May 21 12:59:38 UTC 2019
  ;; MSG SIZE  rcvd: 111

And from an actual packet level it shows that we're using the back end
server when talking via 147.75.207.20{7,8} front end:

  # tcpdump -i any udp
  [...]
  12:59:52.698732 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
  12:59:52.698735 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
  12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
  12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
  [...]

In order to be flexible and to have same semantics as in sendmsg BPF
programs, we only allow return codes in [1,1] range. In the sendmsg case
the program is called if msg->msg_name is present which can be the case
in both, connected and unconnected UDP.

The former only relies on the sockaddr_in{,6} passed via connect(2) if
passed msg->msg_name was NULL. Therefore, on recvmsg side, we act in similar
way to call into the BPF program whenever a non-NULL msg->msg_name was
passed independent of sk->sk_state being TCP_ESTABLISHED or not. Note
that for TCP case, the msg->msg_name is ignored in the regular recvmsg
path and therefore not relevant.

For the case of ip{,v6}_recv_error() paths, picked up via MSG_ERRQUEUE,
the hook is not called. This is intentional as it aligns with the same
semantics as in case of TCP cgroup BPF hooks right now. This might be
better addressed in future through a different bpf_attach_type such
that this case can be distinguished from the regular recvmsg paths,
for example.

Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e2f7fc0ac6957cabff4cecf6c721979b571af208 ]

Commit 31fd85816dbe ("bpf: permits narrower load from bpf program
context fields") made the verifier add AND instructions to clear the
unwanted bits with a mask when doing a narrow load. The mask is
computed with

  (1 << size * 8) - 1

where "size" is the size of the narrow load. When doing a 4 byte load
of a an 8 byte field the verifier shifts the literal 1 by 32 places to
the left. This results in an overflow of a signed integer, which is an
undefined behavior. Typically, the computed mask was zero, so the
result of the narrow load ended up being zero too.

Cast the literal to long long to avoid overflows. Note that narrow
load of the 4 byte fields does not have the undefined behavior,
because the load size can only be either 1 or 2 bytes, so shifting 1
by 8 or 16 places will not overflow it. And reading 4 bytes would not
be a narrow load of a 4 bytes field.

Fixes: 31fd85816dbe ("bpf: permits narrower load from bpf program context fields")
Reviewed-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Iago López Galeiras <iago@kinvolk.io>
Signed-off-by: Krzesimir Nowak <krzesimir@kinvolk.io>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

In case of a null check on a pointer inside a subprog, we should mark all
registers with this pointer as either safe or unknown, in both the current
and previous frames.  Currently, only spilled registers and registers in
the current frame are marked.  Packet bound checks in subprogs have the
same issue.  This patch fixes it to mark registers in previous frames as
well.

A good reproducer for null checks looks as follow:

1: ptr = bpf_map_lookup_elem(map, &key);
2: ret = subprog(ptr) {
3:   return ptr != NULL;
4: }
5: if (ret)
6:   value = *ptr;

With the above, the verifier will complain on line 6 because it sees ptr
as map_value_or_null despite the null check in subprog 1.

Note that this patch fixes another resulting bug when using
bpf_sk_release():

1: sk = bpf_sk_lookup_tcp(...);
2: subprog(sk) {
3:   if (sk)
4:     bpf_sk_release(sk);
5: }
6: if (!sk)
7:   return 0;
8: return 1;

In the above, mark_ptr_or_null_regs will warn on line 6 because it will
try to free the reference state, even though it was already freed on
line 3.

Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)")
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The BPF verifier checks the maximum number of call stack frames twice,
first in the main CFG traversal (do_check) and then in a subsequent
traversal (check_max_stack_depth).  If the second check fails, it logs a
'verifier bug' warning and errors out, as the number of call stack frames
should have been verified already.

However, the second check may fail without indicating a verifier bug: if
the excessive function calls reside in dead code, the main CFG traversal
may not visit them; the subsequent traversal visits all instructions,
including dead code.

This case raises the question of how invalid dead code should be treated.
This patch implements the conservative option and rejects such code.

Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Tested-by: Xiao Han <xiao.han@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Commit 7640ead93924 ("bpf: verifier: make sure callees don't prune
with caller differences") connected up parentage chains of all
frames of the stack.  It didn't, however, ensure propagate_liveness()
propagates all liveness information along those chains.

This means pruning happening in the callee may generate explored
states with incomplete liveness for the chains in lower frames
of the stack.

The included selftest is similar to the prior one from commit
7640ead93924 ("bpf: verifier: make sure callees don't prune with
caller differences"), where callee would prune regardless of the
difference in r8 state.

Now we also initialize r9 to 0 or 1 based on a result from get_random().
r9 is never read so the walk with r9 = 0 gets pruned (correctly) after
the walk with r9 = 1 completes.

The selftest is so arranged that the pruning will happen in the
callee.  Since callee does not propagate read marks of r8, the
explored state at the pruning point prior to the callee will
now ignore r8.

Propagate liveness on all frames of the stack when pruning.

Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Syzkaller hit 'KASAN: use-after-free Write in sanitize_ptr_alu' bug.

Call trace:

  dump_stack+0xbf/0x12e
  print_address_description+0x6a/0x280
  kasan_report+0x237/0x360
  sanitize_ptr_alu+0x85a/0x8d0
  adjust_ptr_min_max_vals+0x8f2/0x1ca0
  adjust_reg_min_max_vals+0x8ed/0x22e0
  do_check+0x1ca6/0x5d00
  bpf_check+0x9ca/0x2570
  bpf_prog_load+0xc91/0x1030
  __se_sys_bpf+0x61e/0x1f00
  do_syscall_64+0xc8/0x550
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fault injection trace:

  kfree+0xea/0x290
  free_func_state+0x4a/0x60
  free_verifier_state+0x61/0xe0
  push_stack+0x216/0x2f0	          <- inject failslab
  sanitize_ptr_alu+0x2b1/0x8d0
  adjust_ptr_min_max_vals+0x8f2/0x1ca0
  adjust_reg_min_max_vals+0x8ed/0x22e0
  do_check+0x1ca6/0x5d00
  bpf_check+0x9ca/0x2570
  bpf_prog_load+0xc91/0x1030
  __se_sys_bpf+0x61e/0x1f00
  do_syscall_64+0xc8/0x550
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

When kzalloc() fails in push_stack(), free_verifier_state() will free
current verifier state. As push_stack() returns, dst_reg was restored
if ptr_is_dst_reg is false. However, as member of the cur_state,
dst_reg is also freed, and error occurs when dereferencing dst_reg.
Simply fix it by testing ret of push_stack() before restoring dst_reg.

Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Naresh reported that test_align fails because of the mismatch at the
verbose printout of the register states.  The reason is due to the newly
added ref_obj_id.

ref_obj_id is only useful for refcounted reg.  Thus, this patch fixes it
by only printing ref_obj_id for refcounted reg.  While at it, it also uses
comma instead of space to separate between "id" and "ref_obj_id".

Fixes: 1b986589680a ("bpf: Fix bpf_tcp_sock and bpf_sk_fullsock issue related to bpf_sk_release")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Lorenz Bauer [thanks!] reported that a ptr returned by bpf_tcp_sock(sk)
can still be accessed after bpf_sk_release(sk).
Both bpf_tcp_sock() and bpf_sk_fullsock() have the same issue.
This patch addresses them together.

A simple reproducer looks like this:

	sk = bpf_sk_lookup_tcp();
	/* if (!sk) ... */
	tp = bpf_tcp_sock(sk);
	/* if (!tp) ... */
	bpf_sk_release(sk);
	snd_cwnd = tp->snd_cwnd; /* oops! The verifier does not complain. */

The problem is the verifier did not scrub the register's states of
the tcp_sock ptr (tp) after bpf_sk_release(sk).

[ Note that when calling bpf_tcp_sock(sk), the sk is not always
  refcount-acquired. e.g. bpf_tcp_sock(skb->sk). The verifier works
  fine for this case. ]

Currently, the verifier does not track if a helper's return ptr (in REG_0)
is "carry"-ing one of its argument's refcount status. To carry this info,
the reg1->id needs to be stored in reg0.

One approach was tried, like "reg0->id = reg1->id", when calling
"bpf_tcp_sock()".  The main idea was to avoid adding another "ref_obj_id"
for the same reg.  However, overlapping the NULL marking and ref
tracking purpose in one "id" does not work well:

	ref_sk = bpf_sk_lookup_tcp();
	fullsock = bpf_sk_fullsock(ref_sk);
	tp = bpf_tcp_sock(ref_sk);
	if (!fullsock) {
	     bpf_sk_release(ref_sk);
	     return 0;
	}
	/* fullsock_reg->id is marked for NOT-NULL.
	 * Same for tp_reg->id because they have the same id.
	 */

	/* oops. verifier did not complain about the missing !tp check */
	snd_cwnd = tp->snd_cwnd;

Hence, a new "ref_obj_id" is needed in "struct bpf_reg_state".
With a new ref_obj_id, when bpf_sk_release(sk) is called, the verifier can
scrub all reg states which has a ref_obj_id match.  It is done with the
changes in release_reg_references() in this patch.

While fixing it, sk_to_full_sk() is removed from bpf_tcp_sock() and
bpf_sk_fullsock() to avoid these helpers from returning
another ptr. It will make bpf_sk_release(tp) possible:

	sk = bpf_sk_lookup_tcp();
	/* if (!sk) ... */
	tp = bpf_tcp_sock(sk);
	/* if (!tp) ... */
	bpf_sk_release(tp);

A separate helper "bpf_get_listener_sock()" will be added in a later
patch to do sk_to_full_sk().

Misc change notes:
- To allow bpf_sk_release(tp), the arg of bpf_sk_release() is changed
  from ARG_PTR_TO_SOCKET to ARG_PTR_TO_SOCK_COMMON.  ARG_PTR_TO_SOCKET
  is removed from bpf.h since no helper is using it.

- arg_type_is_refcounted() is renamed to arg_type_may_be_refcounted()
  because ARG_PTR_TO_SOCK_COMMON is the only one and skb->sk is not
  refcounted.  All bpf_sk_release(), bpf_sk_fullsock() and bpf_tcp_sock()
  take ARG_PTR_TO_SOCK_COMMON.

- check_refcount_ok() ensures is_acquire_function() cannot take
  arg_type_may_be_refcounted() as its argument.

- The check_func_arg() can only allow one refcount-ed arg.  It is
  guaranteed by check_refcount_ok() which ensures at most one arg can be
  refcounted.  Hence, it is a verifier internal error if >1 refcount arg
  found in check_func_arg().

- In release_reference(), release_reference_state() is called
  first to ensure a match on "reg->ref_obj_id" can be found before
  scrubbing the reg states with release_reg_references().

- reg_is_refcounted() is no longer needed.
  1. In mark_ptr_or_null_regs(), its usage is replaced by
     "ref_obj_id && ref_obj_id == id" because,
     when is_null == true, release_reference_state() should only be
     called on the ref_obj_id obtained by a acquire helper (i.e.
     is_acquire_function() == true).  Otherwise, the following
     would happen:

	sk = bpf_sk_lookup_tcp();
	/* if (!sk) { ... } */
	fullsock = bpf_sk_fullsock(sk);
	if (!fullsock) {
		/*
		 * release_reference_state(fullsock_reg->ref_obj_id)
		 * where fullsock_reg->ref_obj_id == sk_reg->ref_obj_id.
		 *
		 * Hence, the following bpf_sk_release(sk) will fail
		 * because the ref state has already been released in the
		 * earlier release_reference_state(fullsock_reg->ref_obj_id).
		 */
		bpf_sk_release(sk);
	}

  2. In release_reg_references(), the current reg_is_refcounted() call
     is unnecessary because the id check is enough.

- The type_is_refcounted() and type_is_refcounted_or_null()
  are no longer needed also because reg_is_refcounted() is removed.

Fixes: 655a51e536c0 ("bpf: Add struct bpf_tcp_sock and BPF_FUNC_tcp_sock")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Non-zero imm value in the second part of the ldimm64 instruction for
BPF_PSEUDO_MAP_FD is invalid, and thus must be rejected. The map fd
only ever sits in the first instructions' imm field. None of the BPF
loaders known to us are using it, so risk of regression is minimal.
For clarity and consistency, the few insn->{src_reg,imm} occurrences
are rewritten into insn[0].{src_reg,imm}. Add a test case to the BPF
selftest suite as well.

Fixes: 0246e64d9a5f ("bpf: handle pseudo BPF_LD_IMM64 insn")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2019-03-04

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add AF_XDP support to libbpf. Rationale is to facilitate writing
   AF_XDP applications by offering higher-level APIs that hide many
   of the details of the AF_XDP uapi. Sample programs are converted
   over to this new interface as well, from Magnus.

2) Introduce a new cant_sleep() macro for annotation of functions
   that cannot sleep and use it in BPF_PROG_RUN() to assert that
   BPF programs run under preemption disabled context, from Peter.

3) Introduce per BPF prog stats in order to monitor the usage
   of BPF; this is controlled by kernel.bpf_stats_enabled sysctl
   knob where monitoring tools can make use of this to efficiently
   determine the average cost of programs, from Alexei.

4) Split up BPF selftest's test_progs similarly as we already
   did with test_verifier. This allows to further reduce merge
   conflicts in future and to get more structure into our
   quickly growing BPF selftest suite, from Stanislav.

5) Fix a bug in BTF's dedup algorithm which can cause an infinite
   loop in some circumstances; also various BPF doc fixes and
   improvements, from Andrii.

6) Various BPF sample cleanups and migration to libbpf in order
   to further isolate the old sample loader code (so we can get
   rid of it at some point), from Jakub.

7) Add a new BPF helper for BPF cgroup skb progs that allows
   to set ECN CE code point and a Host Bandwidth Manager (HBM)
   sample program for limiting the bandwidth used by v2 cgroups,
   from Lawrence.

8) Enable write access to skb->queue_mapping from tc BPF egress
   programs in order to let BPF pick TX queue, from Jesper.

9) Fix a bug in BPF spinlock handling for map-in-map which did
   not propagate spin_lock_off to the meta map, from Yonghong.

10) Fix a bug in the new per-CPU BPF prog counters to properly
    initialize stats for each CPU, from Eric.

11) Add various BPF helper prototypes to selftest's bpf_helpers.h,
    from Willem.

12) Fix various BPF samples bugs in XDP and tracing progs,
    from Toke, Daniel and Yonghong.

13) Silence preemption splat in test_bpf after BPF_PROG_RUN()
    enforces it now everywhere, from Anders.

14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to
    get error handling working, from Dan.

15) Fix bpftool documentation and auto-completion with regards
    to stream_{verdict,parser} attach types, from Alban.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>