linux.git/kernel/bpf, branch v4.14.145 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K 2019-08-25T08:50:23+00:00 Daniel Borkmann daniel@iogearbox.net 2018-12-11T11:14:12+00:00 2d45c6f193789c6b610d734997a2f4cdebec4e37 [ Upstream commit fdadd04931c2d7cd294dc5b2b342863f94be53a3 ] Michael and Sandipan report: Commit ede95a63b5 introduced a bpf_jit_limit tuneable to limit BPF JIT allocations. At compile time it defaults to PAGE_SIZE * 40000, and is adjusted again at init time if MODULES_VADDR is defined. For ppc64 kernels, MODULES_VADDR isn't defined, so we're stuck with the compile-time default at boot-time, which is 0x9c400000 when using 64K page size. This overflows the signed 32-bit bpf_jit_limit value: root@ubuntu:/tmp# cat /proc/sys/net/core/bpf_jit_limit -1673527296 and can cause various unexpected failures throughout the network stack. In one case `strace dhclient eth0` reported: setsockopt(5, SOL_SOCKET, SO_ATTACH_FILTER, {len=11, filter=0x105dd27f8}, 16) = -1 ENOTSUPP (Unknown error 524) and similar failures can be seen with tools like tcpdump. This doesn't always reproduce however, and I'm not sure why. The more consistent failure I've seen is an Ubuntu 18.04 KVM guest booted on a POWER9 host would time out on systemd/netplan configuring a virtio-net NIC with no noticeable errors in the logs. Given this and also given that in near future some architectures like arm64 will have a custom area for BPF JIT image allocations we should get rid of the BPF_JIT_LIMIT_DEFAULT fallback / default entirely. For 4.21, we have an overridable bpf_jit_alloc_exec(), bpf_jit_free_exec() so therefore add another overridable bpf_jit_alloc_exec_limit() helper function which returns the possible size of the memory area for deriving the default heuristic in bpf_jit_charge_init(). Like bpf_jit_alloc_exec() and bpf_jit_free_exec(), the new bpf_jit_alloc_exec_limit() assumes that module_alloc() is the default JIT memory provider, and therefore in case archs implement their custom module_alloc() we use MODULES_{END,_VADDR} for limits and otherwise for vmalloc_exec() cases like on ppc64 we use VMALLOC_{END,_START}. Additionally, for archs supporting large page sizes, we should change the sysctl to be handled as long to not run into sysctl restrictions in future. Fixes: ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations") Reported-by: Sandipan Das <sandipan@linux.ibm.com> Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fdadd04931c2d7cd294dc5b2b342863f94be53a3 ]

Michael and Sandipan report:

  Commit ede95a63b5 introduced a bpf_jit_limit tuneable to limit BPF
  JIT allocations. At compile time it defaults to PAGE_SIZE * 40000,
  and is adjusted again at init time if MODULES_VADDR is defined.

  For ppc64 kernels, MODULES_VADDR isn't defined, so we're stuck with
  the compile-time default at boot-time, which is 0x9c400000 when
  using 64K page size. This overflows the signed 32-bit bpf_jit_limit
  value:

  root@ubuntu:/tmp# cat /proc/sys/net/core/bpf_jit_limit
  -1673527296

  and can cause various unexpected failures throughout the network
  stack. In one case `strace dhclient eth0` reported:

  setsockopt(5, SOL_SOCKET, SO_ATTACH_FILTER, {len=11, filter=0x105dd27f8},
             16) = -1 ENOTSUPP (Unknown error 524)

  and similar failures can be seen with tools like tcpdump. This doesn't
  always reproduce however, and I'm not sure why. The more consistent
  failure I've seen is an Ubuntu 18.04 KVM guest booted on a POWER9
  host would time out on systemd/netplan configuring a virtio-net NIC
  with no noticeable errors in the logs.

Given this and also given that in near future some architectures like
arm64 will have a custom area for BPF JIT image allocations we should
get rid of the BPF_JIT_LIMIT_DEFAULT fallback / default entirely. For
4.21, we have an overridable bpf_jit_alloc_exec(), bpf_jit_free_exec()
so therefore add another overridable bpf_jit_alloc_exec_limit() helper
function which returns the possible size of the memory area for deriving
the default heuristic in bpf_jit_charge_init().

Like bpf_jit_alloc_exec() and bpf_jit_free_exec(), the new
bpf_jit_alloc_exec_limit() assumes that module_alloc() is the default
JIT memory provider, and therefore in case archs implement their custom
module_alloc() we use MODULES_{END,_VADDR} for limits and otherwise for
vmalloc_exec() cases like on ppc64 we use VMALLOC_{END,_START}.

Additionally, for archs supporting large page sizes, we should change
the sysctl to be handled as long to not run into sysctl restrictions
in future.

Fixes: ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations")
Reported-by: Sandipan Das <sandipan@linux.ibm.com>
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf: add bpf_jit_limit knob to restrict unpriv allocations 2019-08-25T08:50:03+00:00 Daniel Borkmann daniel@iogearbox.net 2019-08-16T22:05:36+00:00 a1fe647042affe713a17243cd10e9b25f3d83948 commit ede95a63b5e84ddeea6b0c473b36ab8bfd8c6ce3 upstream. Rick reported that the BPF JIT could potentially fill the entire module space with BPF programs from unprivileged users which would prevent later attempts to load normal kernel modules or privileged BPF programs, for example. If JIT was enabled but unsuccessful to generate the image, then before commit 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config") we would always fall back to the BPF interpreter. Nowadays in the case where the CONFIG_BPF_JIT_ALWAYS_ON could be set, then the load will abort with a failure since the BPF interpreter was compiled out. Add a global limit and enforce it for unprivileged users such that in case of BPF interpreter compiled out we fail once the limit has been reached or we fall back to BPF interpreter earlier w/o using module mem if latter was compiled in. In a next step, fair share among unprivileged users can be resolved in particular for the case where we would fail hard once limit is reached. Fixes: 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config") Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64") Co-Developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jann Horn <jannh@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: LKML <linux-kernel@vger.kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ede95a63b5e84ddeea6b0c473b36ab8bfd8c6ce3 upstream.

Rick reported that the BPF JIT could potentially fill the entire module
space with BPF programs from unprivileged users which would prevent later
attempts to load normal kernel modules or privileged BPF programs, for
example. If JIT was enabled but unsuccessful to generate the image, then
before commit 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
we would always fall back to the BPF interpreter. Nowadays in the case
where the CONFIG_BPF_JIT_ALWAYS_ON could be set, then the load will abort
with a failure since the BPF interpreter was compiled out.

Add a global limit and enforce it for unprivileged users such that in case
of BPF interpreter compiled out we fail once the limit has been reached
or we fall back to BPF interpreter earlier w/o using module mem if latter
was compiled in. In a next step, fair share among unprivileged users can
be resolved in particular for the case where we would fail hard once limit
is reached.

Fixes: 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Co-Developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: get rid of pure_initcall dependency to enable jits 2019-08-25T08:50:02+00:00 Daniel Borkmann daniel@iogearbox.net 2019-08-16T22:04:32+00:00 234646dcfc5f531c74ab20595e89eacd62e3611f commit fa9dd599b4dae841924b022768354cfde9affecb upstream. Having a pure_initcall() callback just to permanently enable BPF JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave a small race window in future where JIT is still disabled on boot. Since we know about the setting at compilation time anyway, just initialize it properly there. Also consolidate all the individual bpf_jit_enable variables into a single one and move them under one location. Moreover, don't allow for setting unspecified garbage values on them. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> [bwh: Backported to 4.14 as dependency of commit 2e4a30983b0f "bpf: restrict access to core bpf sysctls": - Adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fa9dd599b4dae841924b022768354cfde9affecb upstream.

Having a pure_initcall() callback just to permanently enable BPF
JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave
a small race window in future where JIT is still disabled on boot.
Since we know about the setting at compilation time anyway, just
initialize it properly there. Also consolidate all the individual
bpf_jit_enable variables into a single one and move them under one
location. Moreover, don't allow for setting unspecified garbage
values on them.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[bwh: Backported to 4.14 as dependency of commit 2e4a30983b0f
 "bpf: restrict access to core bpf sysctls":
 - Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: silence warning messages in core 2019-07-31T05:28:25+00:00 Valdis Klētnieks valdis.kletnieks@vt.edu 2019-06-07T02:39:27+00:00 07df68f0b878c61ca6ceeeee78c67ea64ae142fa [ Upstream commit aee450cbe482a8c2f6fa5b05b178ef8b8ff107ca ] Compiling kernel/bpf/core.c with W=1 causes a flood of warnings: kernel/bpf/core.c:1198:65: warning: initialized field overwritten [-Woverride-init] 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true | ^~~~ kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL' 1087 | INSN_3(ALU, ADD, X), \ | ^~~~~~ kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP' 1202 | BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL), | ^~~~~~~~~~~~ kernel/bpf/core.c:1198:65: note: (near initialization for 'public_insntable[12]') 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true | ^~~~ kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL' 1087 | INSN_3(ALU, ADD, X), \ | ^~~~~~ kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP' 1202 | BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL), | ^~~~~~~~~~~~ 98 copies of the above. The attached patch silences the warnings, because we *know* we're overwriting the default initializer. That leaves bpf/core.c with only 6 other warnings, which become more visible in comparison. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit aee450cbe482a8c2f6fa5b05b178ef8b8ff107ca ]

Compiling kernel/bpf/core.c with W=1 causes a flood of warnings:

kernel/bpf/core.c:1198:65: warning: initialized field overwritten [-Woverride-init]
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~
kernel/bpf/core.c:1198:65: note: (near initialization for 'public_insntable[12]')
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~

98 copies of the above.

The attached patch silences the warnings, because we *know* we're overwriting
the default initializer. That leaves bpf/core.c with only 6 other warnings,
which become more visible in comparison.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf: devmap: fix use-after-free Read in __dev_map_entry_free 2019-05-31T13:47:13+00:00 Eric Dumazet edumazet@google.com 2019-05-13T16:59:16+00:00 ddfe0bfd0681628c997b4380d2eed7f6f0ec7ef0 commit 2baae3545327632167c0180e9ca1d467416f1919 upstream. synchronize_rcu() is fine when the rcu callbacks only need to free memory (kfree_rcu() or direct kfree() call rcu call backs) __dev_map_entry_free() is a bit more complex, so we need to make sure that call queued __dev_map_entry_free() callbacks have completed. sysbot report: BUG: KASAN: use-after-free in dev_map_flush_old kernel/bpf/devmap.c:365 [inline] BUG: KASAN: use-after-free in __dev_map_entry_free+0x2a8/0x300 kernel/bpf/devmap.c:379 Read of size 8 at addr ffff8801b8da38c8 by task ksoftirqd/1/18 CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.17.0+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 dev_map_flush_old kernel/bpf/devmap.c:365 [inline] __dev_map_entry_free+0x2a8/0x300 kernel/bpf/devmap.c:379 __rcu_reclaim kernel/rcu/rcu.h:178 [inline] rcu_do_batch kernel/rcu/tree.c:2558 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2818 [inline] __rcu_process_callbacks kernel/rcu/tree.c:2785 [inline] rcu_process_callbacks+0xe9d/0x1760 kernel/rcu/tree.c:2802 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284 run_ksoftirqd+0x86/0x100 kernel/softirq.c:645 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164 kthread+0x345/0x410 kernel/kthread.c:240 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 Allocated by task 6675: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620 kmalloc include/linux/slab.h:513 [inline] kzalloc include/linux/slab.h:706 [inline] dev_map_alloc+0x208/0x7f0 kernel/bpf/devmap.c:102 find_and_alloc_map kernel/bpf/syscall.c:129 [inline] map_create+0x393/0x1010 kernel/bpf/syscall.c:453 __do_sys_bpf kernel/bpf/syscall.c:2351 [inline] __se_sys_bpf kernel/bpf/syscall.c:2328 [inline] __x64_sys_bpf+0x303/0x510 kernel/bpf/syscall.c:2328 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 26: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xd9/0x260 mm/slab.c:3813 dev_map_free+0x4fa/0x670 kernel/bpf/devmap.c:191 bpf_map_free_deferred+0xba/0xf0 kernel/bpf/syscall.c:262 process_one_work+0xc64/0x1b70 kernel/workqueue.c:2153 worker_thread+0x181/0x13a0 kernel/workqueue.c:2296 kthread+0x345/0x410 kernel/kthread.c:240 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 The buggy address belongs to the object at ffff8801b8da37c0 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 264 bytes inside of 512-byte region [ffff8801b8da37c0, ffff8801b8da39c0) The buggy address belongs to the page: page:ffffea0006e368c0 count:1 mapcount:0 mapping:ffff8801da800940 index:0xffff8801b8da3540 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0007217b88 ffffea0006e30cc8 ffff8801da800940 raw: ffff8801b8da3540 ffff8801b8da3040 0000000100000004 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801b8da3780: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8801b8da3800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff8801b8da3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801b8da3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b8da3980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+457d3e2ffbcf31aee5c0@syzkaller.appspotmail.com Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2baae3545327632167c0180e9ca1d467416f1919 upstream.

synchronize_rcu() is fine when the rcu callbacks only need
to free memory (kfree_rcu() or direct kfree() call rcu call backs)

__dev_map_entry_free() is a bit more complex, so we need to make
sure that call queued __dev_map_entry_free() callbacks have completed.

sysbot report:

BUG: KASAN: use-after-free in dev_map_flush_old kernel/bpf/devmap.c:365
[inline]
BUG: KASAN: use-after-free in __dev_map_entry_free+0x2a8/0x300
kernel/bpf/devmap.c:379
Read of size 8 at addr ffff8801b8da38c8 by task ksoftirqd/1/18

CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.17.0+ #39
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1b9/0x294 lib/dump_stack.c:113
  print_address_description+0x6c/0x20b mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  dev_map_flush_old kernel/bpf/devmap.c:365 [inline]
  __dev_map_entry_free+0x2a8/0x300 kernel/bpf/devmap.c:379
  __rcu_reclaim kernel/rcu/rcu.h:178 [inline]
  rcu_do_batch kernel/rcu/tree.c:2558 [inline]
  invoke_rcu_callbacks kernel/rcu/tree.c:2818 [inline]
  __rcu_process_callbacks kernel/rcu/tree.c:2785 [inline]
  rcu_process_callbacks+0xe9d/0x1760 kernel/rcu/tree.c:2802
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284
  run_ksoftirqd+0x86/0x100 kernel/softirq.c:645
  smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164
  kthread+0x345/0x410 kernel/kthread.c:240
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

Allocated by task 6675:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
  kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
  kmalloc include/linux/slab.h:513 [inline]
  kzalloc include/linux/slab.h:706 [inline]
  dev_map_alloc+0x208/0x7f0 kernel/bpf/devmap.c:102
  find_and_alloc_map kernel/bpf/syscall.c:129 [inline]
  map_create+0x393/0x1010 kernel/bpf/syscall.c:453
  __do_sys_bpf kernel/bpf/syscall.c:2351 [inline]
  __se_sys_bpf kernel/bpf/syscall.c:2328 [inline]
  __x64_sys_bpf+0x303/0x510 kernel/bpf/syscall.c:2328
  do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 26:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
  kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
  __cache_free mm/slab.c:3498 [inline]
  kfree+0xd9/0x260 mm/slab.c:3813
  dev_map_free+0x4fa/0x670 kernel/bpf/devmap.c:191
  bpf_map_free_deferred+0xba/0xf0 kernel/bpf/syscall.c:262
  process_one_work+0xc64/0x1b70 kernel/workqueue.c:2153
  worker_thread+0x181/0x13a0 kernel/workqueue.c:2296
  kthread+0x345/0x410 kernel/kthread.c:240
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the object at ffff8801b8da37c0
  which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
  512-byte region [ffff8801b8da37c0, ffff8801b8da39c0)
The buggy address belongs to the page:
page:ffffea0006e368c0 count:1 mapcount:0 mapping:ffff8801da800940
index:0xffff8801b8da3540
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0007217b88 ffffea0006e30cc8 ffff8801da800940
raw: ffff8801b8da3540 ffff8801b8da3040 0000000100000004 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8801b8da3780: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
  ffff8801b8da3800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8801b8da3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                               ^
  ffff8801b8da3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8801b8da3980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+457d3e2ffbcf31aee5c0@syzkaller.appspotmail.com
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf, lru: avoid messing with eviction heuristics upon syscall lookup 2019-05-25T16:25:38+00:00 Daniel Borkmann daniel@iogearbox.net 2019-05-13T23:18:56+00:00 c7af97a3fc048d1827b896c1cbbeb0a3841ed44a commit 50b045a8c0ccf44f76640ac3eea8d80ca53979a3 upstream. One of the biggest issues we face right now with picking LRU map over regular hash table is that a map walk out of user space, for example, to just dump the existing entries or to remove certain ones, will completely mess up LRU eviction heuristics and wrong entries such as just created ones will get evicted instead. The reason for this is that we mark an entry as "in use" via bpf_lru_node_set_ref() from system call lookup side as well. Thus upon walk, all entries are being marked, so information of actual least recently used ones are "lost". In case of Cilium where it can be used (besides others) as a BPF based connection tracker, this current behavior causes disruption upon control plane changes that need to walk the map from user space to evict certain entries. Discussion result from bpfconf [0] was that we should simply just remove marking from system call side as no good use case could be found where it's actually needed there. Therefore this patch removes marking for regular LRU and per-CPU flavor. If there ever should be a need in future, the behavior could be selected via map creation flag, but due to mentioned reason we avoid this here. [0] http://vger.kernel.org/bpfconf.html Fixes: 29ba732acbee ("bpf: Add BPF_MAP_TYPE_LRU_HASH") Fixes: 8f8449384ec3 ("bpf: Add BPF_MAP_TYPE_LRU_PERCPU_HASH") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 50b045a8c0ccf44f76640ac3eea8d80ca53979a3 upstream.

One of the biggest issues we face right now with picking LRU map over
regular hash table is that a map walk out of user space, for example,
to just dump the existing entries or to remove certain ones, will
completely mess up LRU eviction heuristics and wrong entries such
as just created ones will get evicted instead. The reason for this
is that we mark an entry as "in use" via bpf_lru_node_set_ref() from
system call lookup side as well. Thus upon walk, all entries are
being marked, so information of actual least recently used ones
are "lost".

In case of Cilium where it can be used (besides others) as a BPF
based connection tracker, this current behavior causes disruption
upon control plane changes that need to walk the map from user space
to evict certain entries. Discussion result from bpfconf [0] was that
we should simply just remove marking from system call side as no
good use case could be found where it's actually needed there.
Therefore this patch removes marking for regular LRU and per-CPU
flavor. If there ever should be a need in future, the behavior could
be selected via map creation flag, but due to mentioned reason we
avoid this here.

  [0] http://vger.kernel.org/bpfconf.html

Fixes: 29ba732acbee ("bpf: Add BPF_MAP_TYPE_LRU_HASH")
Fixes: 8f8449384ec3 ("bpf: Add BPF_MAP_TYPE_LRU_PERCPU_HASH")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: add map_lookup_elem_sys_only for lookups from syscall side 2019-05-25T16:25:37+00:00 Daniel Borkmann daniel@iogearbox.net 2019-05-13T23:18:55+00:00 9f2292309de82d53b03123e7991912150a8016d4 commit c6110222c6f49ea68169f353565eb865488a8619 upstream. Add a callback map_lookup_elem_sys_only() that map implementations could use over map_lookup_elem() from system call side in case the map implementation needs to handle the latter differently than from the BPF data path. If map_lookup_elem_sys_only() is set, this will be preferred pick for map lookups out of user space. This hook is used in a follow-up fix for LRU map, but once development window opens, we can convert other map types from map_lookup_elem() (here, the one called upon BPF_MAP_LOOKUP_ELEM cmd is meant) over to use the callback to simplify and clean up the latter. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c6110222c6f49ea68169f353565eb865488a8619 upstream.

Add a callback map_lookup_elem_sys_only() that map implementations
could use over map_lookup_elem() from system call side in case the
map implementation needs to handle the latter differently than from
the BPF data path. If map_lookup_elem_sys_only() is set, this will
be preferred pick for map lookups out of user space. This hook is
used in a follow-up fix for LRU map, but once development window
opens, we can convert other map types from map_lookup_elem() (here,
the one called upon BPF_MAP_LOOKUP_ELEM cmd is meant) over to use
the callback to simplify and clean up the latter.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: fix sanitation rewrite in case of non-pointers 2019-04-20T07:15:09+00:00 Daniel Borkmann daniel@iogearbox.net 2019-04-03T18:39:16+00:00 a042c21a2341979614a2b48d1ec46de5301d3f78 commit 3612af783cf52c74a031a2f11b82247b2599d3cd upstream. Marek reported that he saw an issue with the below snippet in that timing measurements where off when loaded as unpriv while results were reasonable when loaded as privileged: [...] uint64_t a = bpf_ktime_get_ns(); uint64_t b = bpf_ktime_get_ns(); uint64_t delta = b - a; if ((int64_t)delta > 0) { [...] Turns out there is a bug where a corner case is missing in the fix d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar type from different paths"), namely fixup_bpf_calls() only checks whether aux has a non-zero alu_state, but it also needs to test for the case of BPF_ALU_NON_POINTER since in both occasions we need to skip the masking rewrite (as there is nothing to mask). Fixes: d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar type from different paths") Reported-by: Marek Majkowski <marek@cloudflare.com> Reported-by: Arthur Fabre <afabre@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/ Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3612af783cf52c74a031a2f11b82247b2599d3cd upstream.

Marek reported that he saw an issue with the below snippet in that
timing measurements where off when loaded as unpriv while results
were reasonable when loaded as privileged:

    [...]
    uint64_t a = bpf_ktime_get_ns();
    uint64_t b = bpf_ktime_get_ns();
    uint64_t delta = b - a;
    if ((int64_t)delta > 0) {
    [...]

Turns out there is a bug where a corner case is missing in the fix
d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar
type from different paths"), namely fixup_bpf_calls() only checks
whether aux has a non-zero alu_state, but it also needs to test for
the case of BPF_ALU_NON_POINTER since in both occasions we need to
skip the masking rewrite (as there is nothing to mask).

Fixes: d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar type from different paths")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Reported-by: Arthur Fabre <afabre@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: do not restore dst_reg when cur_state is freed 2019-04-20T07:15:09+00:00 Xu Yu xuyu@linux.alibaba.com 2019-04-03T18:39:15+00:00 12462c88e6e281cd136ae7c93e85fadfcf20722f commit 0803278b0b4d8eeb2b461fb698785df65a725d9e upstream. Syzkaller hit 'KASAN: use-after-free Write in sanitize_ptr_alu' bug. Call trace: dump_stack+0xbf/0x12e print_address_description+0x6a/0x280 kasan_report+0x237/0x360 sanitize_ptr_alu+0x85a/0x8d0 adjust_ptr_min_max_vals+0x8f2/0x1ca0 adjust_reg_min_max_vals+0x8ed/0x22e0 do_check+0x1ca6/0x5d00 bpf_check+0x9ca/0x2570 bpf_prog_load+0xc91/0x1030 __se_sys_bpf+0x61e/0x1f00 do_syscall_64+0xc8/0x550 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fault injection trace:  kfree+0xea/0x290  free_func_state+0x4a/0x60  free_verifier_state+0x61/0xe0  push_stack+0x216/0x2f0 <- inject failslab  sanitize_ptr_alu+0x2b1/0x8d0  adjust_ptr_min_max_vals+0x8f2/0x1ca0  adjust_reg_min_max_vals+0x8ed/0x22e0  do_check+0x1ca6/0x5d00  bpf_check+0x9ca/0x2570  bpf_prog_load+0xc91/0x1030  __se_sys_bpf+0x61e/0x1f00  do_syscall_64+0xc8/0x550  entry_SYSCALL_64_after_hwframe+0x49/0xbe When kzalloc() fails in push_stack(), free_verifier_state() will free current verifier state. As push_stack() returns, dst_reg was restored if ptr_is_dst_reg is false. However, as member of the cur_state, dst_reg is also freed, and error occurs when dereferencing dst_reg. Simply fix it by testing ret of push_stack() before restoring dst_reg. Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic") Signed-off-by: Xu Yu <xuyu@linux.alibaba.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0803278b0b4d8eeb2b461fb698785df65a725d9e upstream.

Syzkaller hit 'KASAN: use-after-free Write in sanitize_ptr_alu' bug.

Call trace:

  dump_stack+0xbf/0x12e
  print_address_description+0x6a/0x280
  kasan_report+0x237/0x360
  sanitize_ptr_alu+0x85a/0x8d0
  adjust_ptr_min_max_vals+0x8f2/0x1ca0
  adjust_reg_min_max_vals+0x8ed/0x22e0
  do_check+0x1ca6/0x5d00
  bpf_check+0x9ca/0x2570
  bpf_prog_load+0xc91/0x1030
  __se_sys_bpf+0x61e/0x1f00
  do_syscall_64+0xc8/0x550
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fault injection trace:

  kfree+0xea/0x290
  free_func_state+0x4a/0x60
  free_verifier_state+0x61/0xe0
  push_stack+0x216/0x2f0	          <- inject failslab
  sanitize_ptr_alu+0x2b1/0x8d0
  adjust_ptr_min_max_vals+0x8f2/0x1ca0
  adjust_reg_min_max_vals+0x8ed/0x22e0
  do_check+0x1ca6/0x5d00
  bpf_check+0x9ca/0x2570
  bpf_prog_load+0xc91/0x1030
  __se_sys_bpf+0x61e/0x1f00
  do_syscall_64+0xc8/0x550
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

When kzalloc() fails in push_stack(), free_verifier_state() will free
current verifier state. As push_stack() returns, dst_reg was restored
if ptr_is_dst_reg is false. However, as member of the cur_state,
dst_reg is also freed, and error occurs when dereferencing dst_reg.
Simply fix it by testing ret of push_stack() before restoring dst_reg.

Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: fix inner map masking to prevent oob under speculation 2019-04-20T07:15:09+00:00 Daniel Borkmann daniel@iogearbox.net 2019-04-03T18:39:14+00:00 0ed998d17cd421da18334745af7aee246abe4c70 commit 9d5564ddcf2a0f5ba3fa1c3a1f8a1b59ad309553 upstream. During review I noticed that inner meta map setup for map in map is buggy in that it does not propagate all needed data from the reference map which the verifier is later accessing. In particular one such case is index masking to prevent out of bounds access under speculative execution due to missing the map's unpriv_array/index_mask field propagation. Fix this such that the verifier is generating the correct code for inlined lookups in case of unpriviledged use. Before patch (test_verifier's 'map in map access' dump): # bpftool prog dump xla id 3 0: (62) *(u32 *)(r10 -4) = 0 1: (bf) r2 = r10 2: (07) r2 += -4 3: (18) r1 = map[id:4] 5: (07) r1 += 272 | 6: (61) r0 = *(u32 *)(r2 +0) | 7: (35) if r0 >= 0x1 goto pc+6 | Inlined map in map lookup 8: (54) (u32) r0 &= (u32) 0 | with index masking for 9: (67) r0 <<= 3 | map->unpriv_array. 10: (0f) r0 += r1 | 11: (79) r0 = *(u64 *)(r0 +0) | 12: (15) if r0 == 0x0 goto pc+1 | 13: (05) goto pc+1 | 14: (b7) r0 = 0 | 15: (15) if r0 == 0x0 goto pc+11 16: (62) *(u32 *)(r10 -4) = 0 17: (bf) r2 = r10 18: (07) r2 += -4 19: (bf) r1 = r0 20: (07) r1 += 272 | 21: (61) r0 = *(u32 *)(r2 +0) | Index masking missing (!) 22: (35) if r0 >= 0x1 goto pc+3 | for inner map despite 23: (67) r0 <<= 3 | map->unpriv_array set. 24: (0f) r0 += r1 | 25: (05) goto pc+1 | 26: (b7) r0 = 0 | 27: (b7) r0 = 0 28: (95) exit After patch: # bpftool prog dump xla id 1 0: (62) *(u32 *)(r10 -4) = 0 1: (bf) r2 = r10 2: (07) r2 += -4 3: (18) r1 = map[id:2] 5: (07) r1 += 272 | 6: (61) r0 = *(u32 *)(r2 +0) | 7: (35) if r0 >= 0x1 goto pc+6 | Same inlined map in map lookup 8: (54) (u32) r0 &= (u32) 0 | with index masking due to 9: (67) r0 <<= 3 | map->unpriv_array. 10: (0f) r0 += r1 | 11: (79) r0 = *(u64 *)(r0 +0) | 12: (15) if r0 == 0x0 goto pc+1 | 13: (05) goto pc+1 | 14: (b7) r0 = 0 | 15: (15) if r0 == 0x0 goto pc+12 16: (62) *(u32 *)(r10 -4) = 0 17: (bf) r2 = r10 18: (07) r2 += -4 19: (bf) r1 = r0 20: (07) r1 += 272 | 21: (61) r0 = *(u32 *)(r2 +0) | 22: (35) if r0 >= 0x1 goto pc+4 | Now fixed inlined inner map 23: (54) (u32) r0 &= (u32) 0 | lookup with proper index masking 24: (67) r0 <<= 3 | for map->unpriv_array. 25: (0f) r0 += r1 | 26: (05) goto pc+1 | 27: (b7) r0 = 0 | 28: (b7) r0 = 0 29: (95) exit Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com> Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9d5564ddcf2a0f5ba3fa1c3a1f8a1b59ad309553 upstream.

During review I noticed that inner meta map setup for map in
map is buggy in that it does not propagate all needed data
from the reference map which the verifier is later accessing.

In particular one such case is index masking to prevent out of
bounds access under speculative execution due to missing the
map's unpriv_array/index_mask field propagation. Fix this such
that the verifier is generating the correct code for inlined
lookups in case of unpriviledged use.

Before patch (test_verifier's 'map in map access' dump):

  # bpftool prog dump xla id 3
     0: (62) *(u32 *)(r10 -4) = 0
     1: (bf) r2 = r10
     2: (07) r2 += -4
     3: (18) r1 = map[id:4]
     5: (07) r1 += 272                |
     6: (61) r0 = *(u32 *)(r2 +0)     |
     7: (35) if r0 >= 0x1 goto pc+6   | Inlined map in map lookup
     8: (54) (u32) r0 &= (u32) 0      | with index masking for
     9: (67) r0 <<= 3                 | map->unpriv_array.
    10: (0f) r0 += r1                 |
    11: (79) r0 = *(u64 *)(r0 +0)     |
    12: (15) if r0 == 0x0 goto pc+1   |
    13: (05) goto pc+1                |
    14: (b7) r0 = 0                   |
    15: (15) if r0 == 0x0 goto pc+11
    16: (62) *(u32 *)(r10 -4) = 0
    17: (bf) r2 = r10
    18: (07) r2 += -4
    19: (bf) r1 = r0
    20: (07) r1 += 272                |
    21: (61) r0 = *(u32 *)(r2 +0)     | Index masking missing (!)
    22: (35) if r0 >= 0x1 goto pc+3   | for inner map despite
    23: (67) r0 <<= 3                 | map->unpriv_array set.
    24: (0f) r0 += r1                 |
    25: (05) goto pc+1                |
    26: (b7) r0 = 0                   |
    27: (b7) r0 = 0
    28: (95) exit

After patch:

  # bpftool prog dump xla id 1
     0: (62) *(u32 *)(r10 -4) = 0
     1: (bf) r2 = r10
     2: (07) r2 += -4
     3: (18) r1 = map[id:2]
     5: (07) r1 += 272                |
     6: (61) r0 = *(u32 *)(r2 +0)     |
     7: (35) if r0 >= 0x1 goto pc+6   | Same inlined map in map lookup
     8: (54) (u32) r0 &= (u32) 0      | with index masking due to
     9: (67) r0 <<= 3                 | map->unpriv_array.
    10: (0f) r0 += r1                 |
    11: (79) r0 = *(u64 *)(r0 +0)     |
    12: (15) if r0 == 0x0 goto pc+1   |
    13: (05) goto pc+1                |
    14: (b7) r0 = 0                   |
    15: (15) if r0 == 0x0 goto pc+12
    16: (62) *(u32 *)(r10 -4) = 0
    17: (bf) r2 = r10
    18: (07) r2 += -4
    19: (bf) r1 = r0
    20: (07) r1 += 272                |
    21: (61) r0 = *(u32 *)(r2 +0)     |
    22: (35) if r0 >= 0x1 goto pc+4   | Now fixed inlined inner map
    23: (54) (u32) r0 &= (u32) 0      | lookup with proper index masking
    24: (67) r0 <<= 3                 | for map->unpriv_array.
    25: (0f) r0 += r1                 |
    26: (05) goto pc+1                |
    27: (b7) r0 = 0                   |
    28: (b7) r0 = 0
    29: (95) exit


Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>