<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/kernel/bpf, branch v5.4.219</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()</title>
<updated>2022-08-11T10:57:51+00:00</updated>
<author>
<name>John Fastabend</name>
<email>john.fastabend@gmail.com</email>
</author>
<published>2022-08-03T14:50:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=7c1134c7da997523e2834dd516e2ddc51920699a'/>
<id>7c1134c7da997523e2834dd516e2ddc51920699a</id>
<content type='text'>
commit 294f2fc6da27620a506e6c050241655459ccd6bd upstream.

Currently, for all op verification we call __red_deduce_bounds() and
__red_bound_offset() but we only call __update_reg_bounds() in bitwise
ops. However, we could benefit from calling __update_reg_bounds() in
BPF_ADD, BPF_SUB, and BPF_MUL cases as well.

For example, a register with state 'R1_w=invP0' when we subtract from
it,

 w1 -= 2

Before coerce we will now have an smin_value=S64_MIN, smax_value=U64_MAX
and unsigned bounds umin_value=0, umax_value=U64_MAX. These will then
be clamped to S32_MIN, U32_MAX values by coerce in the case of alu32 op
as done in above example. However tnum will be a constant because the
ALU op is done on a constant.

Without update_reg_bounds() we have a scenario where tnum is a const
but our unsigned bounds do not reflect this. By calling update_reg_bounds
after coerce to 32bit we further refine the umin_value to U64_MAX in the
alu64 case or U32_MAX in the alu32 case above.

Signed-off-by: John Fastabend &lt;john.fastabend@gmail.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Link: https://lore.kernel.org/bpf/158507151689.15666.566796274289413203.stgit@john-Precision-5820-Tower
Signed-off-by: Ovidiu Panait &lt;ovidiu.panait@windriver.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 294f2fc6da27620a506e6c050241655459ccd6bd upstream.

Currently, for all op verification we call __red_deduce_bounds() and
__red_bound_offset() but we only call __update_reg_bounds() in bitwise
ops. However, we could benefit from calling __update_reg_bounds() in
BPF_ADD, BPF_SUB, and BPF_MUL cases as well.

For example, a register with state 'R1_w=invP0' when we subtract from
it,

 w1 -= 2

Before coerce we will now have an smin_value=S64_MIN, smax_value=U64_MAX
and unsigned bounds umin_value=0, umax_value=U64_MAX. These will then
be clamped to S32_MIN, U32_MAX values by coerce in the case of alu32 op
as done in above example. However tnum will be a constant because the
ALU op is done on a constant.

Without update_reg_bounds() we have a scenario where tnum is a const
but our unsigned bounds do not reflect this. By calling update_reg_bounds
after coerce to 32bit we further refine the umin_value to U64_MAX in the
alu64 case or U32_MAX in the alu32 case above.

Signed-off-by: John Fastabend &lt;john.fastabend@gmail.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Link: https://lore.kernel.org/bpf/158507151689.15666.566796274289413203.stgit@john-Precision-5820-Tower
Signed-off-by: Ovidiu Panait &lt;ovidiu.panait@windriver.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Make sure mac_header was set before using it</title>
<updated>2022-07-29T15:14:16+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2022-07-07T12:39:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=4f1d21c77b15b6eb60f2929bca33e34f95383b24'/>
<id>4f1d21c77b15b6eb60f2929bca33e34f95383b24</id>
<content type='text'>
commit 0326195f523a549e0a9d7fd44c70b26fd7265090 upstream.

Classic BPF has a way to load bytes starting from the mac header.

Some skbs do not have a mac header, and skb_mac_header()
in this case is returning a pointer that 65535 bytes after
skb-&gt;head.

Existing range check in bpf_internal_load_pointer_neg_helper()
was properly kicking and no illegal access was happening.

New sanity check in skb_mac_header() is firing, so we need
to avoid it.

WARNING: CPU: 1 PID: 28990 at include/linux/skbuff.h:2785 skb_mac_header include/linux/skbuff.h:2785 [inline]
WARNING: CPU: 1 PID: 28990 at include/linux/skbuff.h:2785 bpf_internal_load_pointer_neg_helper+0x1b1/0x1c0 kernel/bpf/core.c:74
Modules linked in:
CPU: 1 PID: 28990 Comm: syz-executor.0 Not tainted 5.19.0-rc4-syzkaller-00865-g4874fb9484be #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
RIP: 0010:skb_mac_header include/linux/skbuff.h:2785 [inline]
RIP: 0010:bpf_internal_load_pointer_neg_helper+0x1b1/0x1c0 kernel/bpf/core.c:74
Code: ff ff 45 31 f6 e9 5a ff ff ff e8 aa 27 40 00 e9 3b ff ff ff e8 90 27 40 00 e9 df fe ff ff e8 86 27 40 00 eb 9e e8 2f 2c f3 ff &lt;0f&gt; 0b eb b1 e8 96 27 40 00 e9 79 fe ff ff 90 41 57 41 56 41 55 41
RSP: 0018:ffffc9000309f668 EFLAGS: 00010216
RAX: 0000000000000118 RBX: ffffffffffeff00c RCX: ffffc9000e417000
RDX: 0000000000040000 RSI: ffffffff81873f21 RDI: 0000000000000003
RBP: ffff8880842878c0 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000001 R12: 0000000000000004
R13: ffff88803ac56c00 R14: 000000000000ffff R15: dffffc0000000000
FS: 00007f5c88a16700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdaa9f6c058 CR3: 000000003a82c000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
&lt;TASK&gt;
____bpf_skb_load_helper_32 net/core/filter.c:276 [inline]
bpf_skb_load_helper_32+0x191/0x220 net/core/filter.c:264

Fixes: f9aefd6b2aa3 ("net: warn if mac header was not set")
Reported-by: syzbot &lt;syzkaller@googlegroups.com&gt;
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20220707123900.945305-1-edumazet@google.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 0326195f523a549e0a9d7fd44c70b26fd7265090 upstream.

Classic BPF has a way to load bytes starting from the mac header.

Some skbs do not have a mac header, and skb_mac_header()
in this case is returning a pointer that 65535 bytes after
skb-&gt;head.

Existing range check in bpf_internal_load_pointer_neg_helper()
was properly kicking and no illegal access was happening.

New sanity check in skb_mac_header() is firing, so we need
to avoid it.

WARNING: CPU: 1 PID: 28990 at include/linux/skbuff.h:2785 skb_mac_header include/linux/skbuff.h:2785 [inline]
WARNING: CPU: 1 PID: 28990 at include/linux/skbuff.h:2785 bpf_internal_load_pointer_neg_helper+0x1b1/0x1c0 kernel/bpf/core.c:74
Modules linked in:
CPU: 1 PID: 28990 Comm: syz-executor.0 Not tainted 5.19.0-rc4-syzkaller-00865-g4874fb9484be #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
RIP: 0010:skb_mac_header include/linux/skbuff.h:2785 [inline]
RIP: 0010:bpf_internal_load_pointer_neg_helper+0x1b1/0x1c0 kernel/bpf/core.c:74
Code: ff ff 45 31 f6 e9 5a ff ff ff e8 aa 27 40 00 e9 3b ff ff ff e8 90 27 40 00 e9 df fe ff ff e8 86 27 40 00 eb 9e e8 2f 2c f3 ff &lt;0f&gt; 0b eb b1 e8 96 27 40 00 e9 79 fe ff ff 90 41 57 41 56 41 55 41
RSP: 0018:ffffc9000309f668 EFLAGS: 00010216
RAX: 0000000000000118 RBX: ffffffffffeff00c RCX: ffffc9000e417000
RDX: 0000000000040000 RSI: ffffffff81873f21 RDI: 0000000000000003
RBP: ffff8880842878c0 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000001 R12: 0000000000000004
R13: ffff88803ac56c00 R14: 000000000000ffff R15: dffffc0000000000
FS: 00007f5c88a16700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdaa9f6c058 CR3: 000000003a82c000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
&lt;TASK&gt;
____bpf_skb_load_helper_32 net/core/filter.c:276 [inline]
bpf_skb_load_helper_32+0x191/0x220 net/core/filter.c:264

Fixes: f9aefd6b2aa3 ("net: warn if mac header was not set")
Reported-by: syzbot &lt;syzkaller@googlegroups.com&gt;
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20220707123900.945305-1-edumazet@google.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Fix incorrect memory charge cost calculation in stack_map_alloc()</title>
<updated>2022-06-22T12:11:02+00:00</updated>
<author>
<name>Yuntao Wang</name>
<email>ytcoode@gmail.com</email>
</author>
<published>2022-06-14T14:26:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=e804587ecdcde138ab2d4394ba3cd5ac5efaea3b'/>
<id>e804587ecdcde138ab2d4394ba3cd5ac5efaea3b</id>
<content type='text'>
commit b45043192b3e481304062938a6561da2ceea46a6 upstream.

This is a backport of the original upstream patch for 5.4/5.10.

The original upstream patch has been applied to 5.4/5.10 branches, which
simply removed the line:

  cost += n_buckets * (value_size + sizeof(struct stack_map_bucket));

This is correct for upstream branch but incorrect for 5.4/5.10 branches,
as the 5.4/5.10 branches do not have the commit 370868107bf6 ("bpf:
Eliminate rlimit-based memory accounting for stackmap maps"), so the
bpf_map_charge_init() function has not been removed.

Currently the bpf_map_charge_init() function in 5.4/5.10 branches takes a
wrong memory charge cost, the

  attr-&gt;max_entries * (sizeof(struct stack_map_bucket) + (u64)value_size))

part is missing, let's fix it.

Cc: &lt;stable@vger.kernel.org&gt; # 5.4.y
Cc: &lt;stable@vger.kernel.org&gt; # 5.10.y
Signed-off-by: Yuntao Wang &lt;ytcoode@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit b45043192b3e481304062938a6561da2ceea46a6 upstream.

This is a backport of the original upstream patch for 5.4/5.10.

The original upstream patch has been applied to 5.4/5.10 branches, which
simply removed the line:

  cost += n_buckets * (value_size + sizeof(struct stack_map_bucket));

This is correct for upstream branch but incorrect for 5.4/5.10 branches,
as the 5.4/5.10 branches do not have the commit 370868107bf6 ("bpf:
Eliminate rlimit-based memory accounting for stackmap maps"), so the
bpf_map_charge_init() function has not been removed.

Currently the bpf_map_charge_init() function in 5.4/5.10 branches takes a
wrong memory charge cost, the

  attr-&gt;max_entries * (sizeof(struct stack_map_bucket) + (u64)value_size))

part is missing, let's fix it.

Cc: &lt;stable@vger.kernel.org&gt; # 5.4.y
Cc: &lt;stable@vger.kernel.org&gt; # 5.10.y
Signed-off-by: Yuntao Wang &lt;ytcoode@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Fix excessive memory allocation in stack_map_alloc()</title>
<updated>2022-06-14T16:11:32+00:00</updated>
<author>
<name>Yuntao Wang</name>
<email>ytcoode@gmail.com</email>
</author>
<published>2022-04-07T13:04:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=93c0f9d78dddd3e60062b83715e5fabd2692d6a0'/>
<id>93c0f9d78dddd3e60062b83715e5fabd2692d6a0</id>
<content type='text'>
[ Upstream commit b45043192b3e481304062938a6561da2ceea46a6 ]

The 'n_buckets * (value_size + sizeof(struct stack_map_bucket))' part of the
allocated memory for 'smap' is never used after the memlock accounting was
removed, thus get rid of it.

[ Note, Daniel:

Commit b936ca643ade ("bpf: rework memlock-based memory accounting for maps")
moved `cost += n_buckets * (value_size + sizeof(struct stack_map_bucket))`
up and therefore before the bpf_map_area_alloc() allocation, sigh. In a later
step commit c85d69135a91 ("bpf: move memory size checks to bpf_map_charge_init()"),
and the overflow checks of `cost &gt;= U32_MAX - PAGE_SIZE` moved into
bpf_map_charge_init(). And then 370868107bf6 ("bpf: Eliminate rlimit-based
memory accounting for stackmap maps") finally removed the bpf_map_charge_init().
Anyway, the original code did the allocation same way as /after/ this fix. ]

Fixes: b936ca643ade ("bpf: rework memlock-based memory accounting for maps")
Signed-off-by: Yuntao Wang &lt;ytcoode@gmail.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20220407130423.798386-1-ytcoode@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit b45043192b3e481304062938a6561da2ceea46a6 ]

The 'n_buckets * (value_size + sizeof(struct stack_map_bucket))' part of the
allocated memory for 'smap' is never used after the memlock accounting was
removed, thus get rid of it.

[ Note, Daniel:

Commit b936ca643ade ("bpf: rework memlock-based memory accounting for maps")
moved `cost += n_buckets * (value_size + sizeof(struct stack_map_bucket))`
up and therefore before the bpf_map_area_alloc() allocation, sigh. In a later
step commit c85d69135a91 ("bpf: move memory size checks to bpf_map_charge_init()"),
and the overflow checks of `cost &gt;= U32_MAX - PAGE_SIZE` moved into
bpf_map_charge_init(). And then 370868107bf6 ("bpf: Eliminate rlimit-based
memory accounting for stackmap maps") finally removed the bpf_map_charge_init().
Anyway, the original code did the allocation same way as /after/ this fix. ]

Fixes: b936ca643ade ("bpf: rework memlock-based memory accounting for maps")
Signed-off-by: Yuntao Wang &lt;ytcoode@gmail.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20220407130423.798386-1-ytcoode@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Add kconfig knob for disabling unpriv bpf by default</title>
<updated>2022-02-16T11:52:49+00:00</updated>
<author>
<name>Daniel Borkmann</name>
<email>daniel@iogearbox.net</email>
</author>
<published>2021-05-11T20:35:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=c230f6ba1011de8eee5e2468f67eaffaee0f82d4'/>
<id>c230f6ba1011de8eee5e2468f67eaffaee0f82d4</id>
<content type='text'>
commit 08389d888287c3823f80b0216766b71e17f0aba5 upstream.

Add a kconfig knob which allows for unprivileged bpf to be disabled by default.
If set, the knob sets /proc/sys/kernel/unprivileged_bpf_disabled to value of 2.

This still allows a transition of 2 -&gt; {0,1} through an admin. Similarly,
this also still keeps 1 -&gt; {1} behavior intact, so that once set to permanently
disabled, it cannot be undone aside from a reboot.

We've also added extra2 with max of 2 for the procfs handler, so that an admin
still has a chance to toggle between 0 &lt;-&gt; 2.

Either way, as an additional alternative, applications can make use of CAP_BPF
that we added a while ago.

Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Link: https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.net
[fllinden@amazon.com: backported to 5.4]
Signed-off-by: Frank van der Linden &lt;fllinden@amazon.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 08389d888287c3823f80b0216766b71e17f0aba5 upstream.

Add a kconfig knob which allows for unprivileged bpf to be disabled by default.
If set, the knob sets /proc/sys/kernel/unprivileged_bpf_disabled to value of 2.

This still allows a transition of 2 -&gt; {0,1} through an admin. Similarly,
this also still keeps 1 -&gt; {1} behavior intact, so that once set to permanently
disabled, it cannot be undone aside from a reboot.

We've also added extra2 with max of 2 for the procfs handler, so that an admin
still has a chance to toggle between 0 &lt;-&gt; 2.

Either way, as an additional alternative, applications can make use of CAP_BPF
that we added a while ago.

Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Link: https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.net
[fllinden@amazon.com: backported to 5.4]
Signed-off-by: Frank van der Linden &lt;fllinden@amazon.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Fix integer overflow in argument calculation for bpf_map_area_alloc</title>
<updated>2021-12-17T09:12:24+00:00</updated>
<author>
<name>Bui Quang Minh</name>
<email>minhquangbui99@gmail.com</email>
</author>
<published>2021-06-13T14:34:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=f6f1d1911492d360ebb0dfb353731d3819ebf7db'/>
<id>f6f1d1911492d360ebb0dfb353731d3819ebf7db</id>
<content type='text'>
commit 7dd5d437c258bbf4cc15b35229e5208b87b8b4e0 upstream.

In 32-bit architecture, the result of sizeof() is a 32-bit integer so
the expression becomes the multiplication between 2 32-bit integer which
can potentially leads to integer overflow. As a result,
bpf_map_area_alloc() allocates less memory than needed.

Fix this by casting 1 operand to u64.

Fixes: 0d2c4f964050 ("bpf: Eliminate rlimit-based memory accounting for sockmap and sockhash maps")
Fixes: 99c51064fb06 ("devmap: Use bpf_map_area_alloc() for allocating hash buckets")
Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Bui Quang Minh &lt;minhquangbui99@gmail.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Link: https://lore.kernel.org/bpf/20210613143440.71975-1-minhquangbui99@gmail.com
Signed-off-by: Connor O'Brien &lt;connoro@google.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 7dd5d437c258bbf4cc15b35229e5208b87b8b4e0 upstream.

In 32-bit architecture, the result of sizeof() is a 32-bit integer so
the expression becomes the multiplication between 2 32-bit integer which
can potentially leads to integer overflow. As a result,
bpf_map_area_alloc() allocates less memory than needed.

Fix this by casting 1 operand to u64.

Fixes: 0d2c4f964050 ("bpf: Eliminate rlimit-based memory accounting for sockmap and sockhash maps")
Fixes: 99c51064fb06 ("devmap: Use bpf_map_area_alloc() for allocating hash buckets")
Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Bui Quang Minh &lt;minhquangbui99@gmail.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Link: https://lore.kernel.org/bpf/20210613143440.71975-1-minhquangbui99@gmail.com
Signed-off-by: Connor O'Brien &lt;connoro@google.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Fix the off-by-two error in range markings</title>
<updated>2021-12-14T13:48:59+00:00</updated>
<author>
<name>Maxim Mikityanskiy</name>
<email>maximmi@nvidia.com</email>
</author>
<published>2021-11-30T18:16:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=4174bd4221c2db5f385b4e260b77f248b2c02850'/>
<id>4174bd4221c2db5f385b4e260b77f248b2c02850</id>
<content type='text'>
commit 2fa7d94afc1afbb4d702760c058dc2d7ed30f226 upstream.

The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):

  // 1. Passes the verifier:
  if (data + 8 &gt; data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

  // 2. Rejected by the verifier (should still pass):
  if (data + 7 &gt;= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:

  // 3. Rejected by the verifier, but the check is stricter than in #1.
  if (data + 8 &gt;= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.

This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.

Fixes: fb2a311a31d3 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773b2 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy &lt;maximmi@nvidia.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2fa7d94afc1afbb4d702760c058dc2d7ed30f226 upstream.

The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):

  // 1. Passes the verifier:
  if (data + 8 &gt; data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

  // 2. Rejected by the verifier (should still pass):
  if (data + 7 &gt;= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:

  // 3. Rejected by the verifier, but the check is stricter than in #1.
  if (data + 8 &gt;= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.

This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.

Fixes: fb2a311a31d3 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773b2 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy &lt;maximmi@nvidia.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Prevent increasing bpf_jit_limit above max</title>
<updated>2021-11-17T08:48:20+00:00</updated>
<author>
<name>Lorenz Bauer</name>
<email>lmb@cloudflare.com</email>
</author>
<published>2021-10-14T14:25:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=de649ec7ad84392ec69c2918fe68e034b5ea8b0a'/>
<id>de649ec7ad84392ec69c2918fe68e034b5ea8b0a</id>
<content type='text'>
[ Upstream commit fadb7ff1a6c2c565af56b4aacdd086b067eed440 ]

Restrict bpf_jit_limit to the maximum supported by the arch's JIT.

Signed-off-by: Lorenz Bauer &lt;lmb@cloudflare.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Link: https://lore.kernel.org/bpf/20211014142554.53120-4-lmb@cloudflare.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit fadb7ff1a6c2c565af56b4aacdd086b067eed440 ]

Restrict bpf_jit_limit to the maximum supported by the arch's JIT.

Signed-off-by: Lorenz Bauer &lt;lmb@cloudflare.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Link: https://lore.kernel.org/bpf/20211014142554.53120-4-lmb@cloudflare.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Fix integer overflow in prealloc_elems_and_freelist()</title>
<updated>2021-10-13T08:08:18+00:00</updated>
<author>
<name>Tatsuhiko Yasumatsu</name>
<email>th.yasumatsu@gmail.com</email>
</author>
<published>2021-09-30T13:55:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=b14f28126c51533bb329379f65de5b0dd689b13a'/>
<id>b14f28126c51533bb329379f65de5b0dd689b13a</id>
<content type='text'>
[ Upstream commit 30e29a9a2bc6a4888335a6ede968b75cd329657a ]

In prealloc_elems_and_freelist(), the multiplication to calculate the
size passed to bpf_map_area_alloc() could lead to an integer overflow.
As a result, out-of-bounds write could occur in pcpu_freelist_populate()
as reported by KASAN:

[...]
[   16.968613] BUG: KASAN: slab-out-of-bounds in pcpu_freelist_populate+0xd9/0x100
[   16.969408] Write of size 8 at addr ffff888104fc6ea0 by task crash/78
[   16.970038]
[   16.970195] CPU: 0 PID: 78 Comm: crash Not tainted 5.15.0-rc2+ #1
[   16.970878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[   16.972026] Call Trace:
[   16.972306]  dump_stack_lvl+0x34/0x44
[   16.972687]  print_address_description.constprop.0+0x21/0x140
[   16.973297]  ? pcpu_freelist_populate+0xd9/0x100
[   16.973777]  ? pcpu_freelist_populate+0xd9/0x100
[   16.974257]  kasan_report.cold+0x7f/0x11b
[   16.974681]  ? pcpu_freelist_populate+0xd9/0x100
[   16.975190]  pcpu_freelist_populate+0xd9/0x100
[   16.975669]  stack_map_alloc+0x209/0x2a0
[   16.976106]  __sys_bpf+0xd83/0x2ce0
[...]

The possibility of this overflow was originally discussed in [0], but
was overlooked.

Fix the integer overflow by changing elem_size to u64 from u32.

  [0] https://lore.kernel.org/bpf/728b238e-a481-eb50-98e9-b0f430ab01e7@gmail.com/

Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Signed-off-by: Tatsuhiko Yasumatsu &lt;th.yasumatsu@gmail.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20210930135545.173698-1-th.yasumatsu@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 30e29a9a2bc6a4888335a6ede968b75cd329657a ]

In prealloc_elems_and_freelist(), the multiplication to calculate the
size passed to bpf_map_area_alloc() could lead to an integer overflow.
As a result, out-of-bounds write could occur in pcpu_freelist_populate()
as reported by KASAN:

[...]
[   16.968613] BUG: KASAN: slab-out-of-bounds in pcpu_freelist_populate+0xd9/0x100
[   16.969408] Write of size 8 at addr ffff888104fc6ea0 by task crash/78
[   16.970038]
[   16.970195] CPU: 0 PID: 78 Comm: crash Not tainted 5.15.0-rc2+ #1
[   16.970878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[   16.972026] Call Trace:
[   16.972306]  dump_stack_lvl+0x34/0x44
[   16.972687]  print_address_description.constprop.0+0x21/0x140
[   16.973297]  ? pcpu_freelist_populate+0xd9/0x100
[   16.973777]  ? pcpu_freelist_populate+0xd9/0x100
[   16.974257]  kasan_report.cold+0x7f/0x11b
[   16.974681]  ? pcpu_freelist_populate+0xd9/0x100
[   16.975190]  pcpu_freelist_populate+0xd9/0x100
[   16.975669]  stack_map_alloc+0x209/0x2a0
[   16.976106]  __sys_bpf+0xd83/0x2ce0
[...]

The possibility of this overflow was originally discussed in [0], but
was overlooked.

Fix the integer overflow by changing elem_size to u64 from u32.

  [0] https://lore.kernel.org/bpf/728b238e-a481-eb50-98e9-b0f430ab01e7@gmail.com/

Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Signed-off-by: Tatsuhiko Yasumatsu &lt;th.yasumatsu@gmail.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20210930135545.173698-1-th.yasumatsu@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Add oversize check before call kvcalloc()</title>
<updated>2021-09-30T08:09:25+00:00</updated>
<author>
<name>Bixuan Cui</name>
<email>cuibixuan@huawei.com</email>
</author>
<published>2021-09-11T00:55:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=93937596e0652d50973f9dc944fea1694ac8cdfd'/>
<id>93937596e0652d50973f9dc944fea1694ac8cdfd</id>
<content type='text'>
[ Upstream commit 0e6491b559704da720f6da09dd0a52c4df44c514 ]

Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the
oversize check. When the allocation is larger than what kmalloc() supports,
the following warning triggered:

WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597
Modules linked in:
CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597
Call Trace:
 kvmalloc include/linux/mm.h:806 [inline]
 kvmalloc_array include/linux/mm.h:824 [inline]
 kvcalloc include/linux/mm.h:829 [inline]
 check_btf_line kernel/bpf/verifier.c:9925 [inline]
 check_btf_info kernel/bpf/verifier.c:10049 [inline]
 bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759
 bpf_prog_load kernel/bpf/syscall.c:2301 [inline]
 __sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587
 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
 __x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-by: syzbot+f3e749d4c662818ae439@syzkaller.appspotmail.com
Signed-off-by: Bixuan Cui &lt;cuibixuan@huawei.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Acked-by: Yonghong Song &lt;yhs@fb.com&gt;
Link: https://lore.kernel.org/bpf/20210911005557.45518-1-cuibixuan@huawei.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 0e6491b559704da720f6da09dd0a52c4df44c514 ]

Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the
oversize check. When the allocation is larger than what kmalloc() supports,
the following warning triggered:

WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597
Modules linked in:
CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597
Call Trace:
 kvmalloc include/linux/mm.h:806 [inline]
 kvmalloc_array include/linux/mm.h:824 [inline]
 kvcalloc include/linux/mm.h:829 [inline]
 check_btf_line kernel/bpf/verifier.c:9925 [inline]
 check_btf_info kernel/bpf/verifier.c:10049 [inline]
 bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759
 bpf_prog_load kernel/bpf/syscall.c:2301 [inline]
 __sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587
 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
 __x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-by: syzbot+f3e749d4c662818ae439@syzkaller.appspotmail.com
Signed-off-by: Bixuan Cui &lt;cuibixuan@huawei.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Acked-by: Yonghong Song &lt;yhs@fb.com&gt;
Link: https://lore.kernel.org/bpf/20210911005557.45518-1-cuibixuan@huawei.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
