linux.git/kernel/capability.c, branch v6.6.131

lsm: constify the 'target' parameter in security_capget()

2023-08-08T20:48:47+00:00

Three LSMs register the implementations for the "capget" hook: AppArmor,
SELinux, and the normal capability code. Looking at the function
implementations we may observe that the first parameter "target" is not
changing.

Mark the first argument "target" of LSM hook security_capget() as
"const" since it will not be changing in the LSM hook.

cap_capget() LSM hook declaration exceeds the 80 characters per line
limit. Split the function declaration to multiple lines to decrease the
line length.

Signed-off-by: Khadija Kamran 
Acked-by: John Johansen 
[PM: align the cap_capget() declaration, spelling fixes]
Signed-off-by: Paul Moore

capability: fix kernel-doc warnings in capability.c

2023-05-22T18:30:52+00:00

Fix all kernel-doc warnings in capability.c:

kernel/capability.c:477: warning: Function parameter or member 'idmap'
not described in 'privileged_wrt_inode_uidgid'
kernel/capability.c:493: warning: Function parameter or member 'idmap'
not described in 'capable_wrt_inode_uidgid'

Signed-off-by: Gaosheng Cui 
Acked-by: Serge Hallyn 
Signed-off-by: Paul Moore

capability: just use a 'u64' instead of a 'u32[2]' array

2023-03-01T18:01:22+00:00

Back in 2008 we extended the capability bits from 32 to 64, and we did
it by extending the single 32-bit capability word from one word to an
array of two words.  It was then obfuscated by hiding the "2" behind two
macro expansions, with the reasoning being that maybe it gets extended
further some day.

That reasoning may have been valid at the time, but the last thing we
want to do is to extend the capability set any more.  And the array of
values not only causes source code oddities (with loops to deal with
it), but also results in worse code generation.  It's a lose-lose
situation.

So just change the 'u32[2]' into a 'u64' and be done with it.

We still have to deal with the fact that the user space interface is
designed around an array of these 32-bit values, but that was the case
before too, since the array layouts were different (ie user space
doesn't use an array of 32-bit values for individual capability masks,
but an array of 32-bit slices of multiple masks).

So that marshalling of data is actually simplified too, even if it does
remain somewhat obscure and odd.

This was all triggered by my reaction to the new "cap_isidentical()"
introduced recently.  By just using a saner data structure, it went from

	unsigned __capi;
	CAP_FOR_EACH_U32(__capi) {
		if (a.cap[__capi] != b.cap[__capi])
			return false;
	}
	return true;

to just being

	return a.val == b.val;

instead.  Which is rather more obvious both to humans and to compilers.

Cc: Mateusz Guzik 
Cc: Casey Schaufler 
Cc: Serge Hallyn 
Cc: Al Viro 
Cc: Paul Moore 
Signed-off-by: Linus Torvalds

fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap

2023-01-19T08:24:29+00:00

Convert to struct mnt_idmap.
Remove legacy file_mnt_user_ns() and mnt_user_ns().

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port privilege checking helpers to mnt_idmap

2023-01-19T08:24:29+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

caps: use type safe idmapping helpers

2022-10-26T08:02:39+00:00

We already ported most parts and filesystems over for v6.0 to the new
vfs{g,u}id_t type and associated helpers for v6.0. Convert the remaining
places so we can remove all the old helpers.
This is a non-functional change.

Reviewed-by: Seth Forshee (DigitalOcean) 
Signed-off-by: Christian Brauner (Microsoft)

xfs: don't generate selinux audit messages for capability testing

2022-03-09T18:32:06+00:00

There are a few places where we test the current process' capability set
to decide if we're going to be more or less generous with resource
acquisition for a system call.  If the process doesn't have the
capability, we can continue the call, albeit in a degraded mode.

These are /not/ the actual security decisions, so it's not proper to use
capable(), which (in certain selinux setups) causes audit messages to
get logged.  Switch them to has_capability_noaudit.

Fixes: 7317a03df703f ("xfs: refactor inode ownership change transaction/inode/quota allocation idiom")
Fixes: ea9a46e1c4925 ("xfs: only return detailed fsmap info if the caller has CAP_SYS_ADMIN")
Signed-off-by: Darrick J. Wong 
Cc: Dave Chinner 
Reviewed-by: Ondrej Mosnacek 
Acked-by: Serge Hallyn 
Reviewed-by: Eric Sandeen

capability: handle idmapped mounts

2021-01-24T13:27:16+00:00

In order to determine whether a caller holds privilege over a given
inode the capability framework exposes the two helpers
privileged_wrt_inode_uidgid() and capable_wrt_inode_uidgid(). The former
verifies that the inode has a mapping in the caller's user namespace and
the latter additionally verifies that the caller has the requested
capability in their current user namespace.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped inodes. If the initial user namespace is passed all
operations are a nop so non-idmapped mounts will not see a change in
behavior.

Link: https://lore.kernel.org/r/20210121131959.646623-5-christian.brauner@ubuntu.com
Cc: Christoph Hellwig 
Cc: David Howells 
Cc: Al Viro 
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig 
Reviewed-by: James Morris 
Acked-by: Serge Hallyn 
Signed-off-by: Christian Brauner

LSM: Signal to SafeSetID when setting group IDs

2020-10-13T16:17:34+00:00

For SafeSetID to properly gate set*gid() calls, it needs to know whether
ns_capable() is being called from within a sys_set*gid() function or is
being called from elsewhere in the kernel. This allows SafeSetID to deny
CAP_SETGID to restricted groups when they are attempting to use the
capability for code paths other than updating GIDs (e.g. setting up
userns GID mappings). This is the identical approach to what is
currently done for CAP_SETUID.

NOTE: We also add signaling to SafeSetID from the setgroups() syscall,
as we have future plans to restrict a process' ability to set
supplementary groups in addition to what is added in this series for
restricting setting of the primary group.

Signed-off-by: Thomas Cedeno 
Signed-off-by: Micah Morton

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva