[ Upstream commit 7dff99b354601dd01829e1511711846e04340a69 ]

This config option goes way back - it used to be an internal debug
option to random.c (at that point called DEBUG_RANDOM_BOOT), then was
renamed and exposed as a config option as CONFIG_WARN_UNSEEDED_RANDOM,
and then further renamed to the current CONFIG_WARN_ALL_UNSEEDED_RANDOM.

It was all done with the best of intentions: the more limited
rate-limited reports were reporting some cases, but if you wanted to see
all the gory details, you'd enable this "ALL" option.

However, it turns out - perhaps not surprisingly - that when people
don't care about and fix the first rate-limited cases, they most
certainly don't care about any others either, and so warning about all
of them isn't actually helping anything.

And the non-ratelimited reporting causes problems, where well-meaning
people enable debug options, but the excessive flood of messages that
nobody cares about will hide actual real information when things go
wrong.

I just got a kernel bug report (which had nothing to do with randomness)
where two thirds of the the truncated dmesg was just variations of

   random: get_random_u32 called from __get_random_u32_below+0x10/0x70 with crng_init=0

and in the process early boot messages had been lost (in addition to
making the messages that _hadn't_ been lost harder to read).

The proper way to find these things for the hypothetical developer that
cares - if such a person exists - is almost certainly with boot time
tracing.  That gives you the option to get call graphs etc too, which is
likely a requirement for fixing any problems anyway.

See Documentation/trace/boottime-trace.rst for that option.

And if we for some reason do want to re-introduce actual printing of
these things, it will need to have some uniqueness filtering rather than
this "just print it all" model.

Fixes: cc1e127bfa95 ("random: remove ratelimiting for in-kernel unseeded randomness")
Acked-by: Jason Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

The kernel's CFI implementation uses the KCFI ABI specifically, and is
not strictly tied to a particular compiler. In preparation for GCC
supporting KCFI, rename CONFIG_CFI_CLANG to CONFIG_CFI (along with
associated options).

Use new "transitional" Kconfig option for old CONFIG_CFI_CLANG that will
enable CONFIG_CFI during olddefconfig.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>

To reduce stale data lifetimes, enable CONFIG_INIT_ON_FREE_DEFAULT_ON as
well. This matches the addition of CONFIG_STACKLEAK=y, which is doing
similar for stack memory.

Link: https://lore.kernel.org/r/20250717232519.2984886-13-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>

Since we can wipe the stack with both Clang and GCC plugins, enable this
for the "hardening.config" for wider testing.

Link: https://lore.kernel.org/r/20250717232519.2984886-12-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>

Pull Kbuild updates from Masahiro Yamada:

 - Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
   exports a symbol only to specified modules

 - Improve ABI handling in gendwarfksyms

 - Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n

 - Add checkers for redundant or missing <linux/export.h> inclusion

 - Deprecate the extra-y syntax

 - Fix a genksyms bug when including enum constants from *.symref files

* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
  genksyms: Fix enum consts from a reference affecting new values
  arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
  kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
  efi/libstub: use 'targets' instead of extra-y in Makefile
  module: make __mod_device_table__* symbols static
  scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
  scripts/misc-check: check missing #include <linux/export.h> when W=1
  scripts/misc-check: add double-quotes to satisfy shellcheck
  kbuild: move W=1 check for scripts/misc-check to top-level Makefile
  scripts/tags.sh: allow to use alternative ctags implementation
  kconfig: introduce menu type enum
  docs: symbol-namespaces: fix reST warning with literal block
  kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
  tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
  docs/core-api/symbol-namespaces: drop table of contents and section numbering
  modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
  kbuild: move kbuild syntax processing to scripts/Makefile.build
  Makefile: remove dependency on archscripts for header installation
  Documentation/kbuild: Add new gendwarfksyms kABI rules
  Documentation/kbuild: Drop section numbers
  ...

This CONFIG option, if supported by the architecture, helps reduce the
size of vmlinux.

For example, the size of vmlinux with ARCH=arm tinyconfig decreases as
follows:

   text	   data	    bss	    dec	    hex	filename
 631684	 104500	  18176	 754360	  b82b8	vmlinux.before
 455316	  93404	  15472	 564192	  89be0	vmlinux.after

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull networking updates from Paolo Abeni:
 "Core:

   - Implement the Device Memory TCP transmit path, allowing zero-copy
     data transmission on top of TCP from e.g. GPU memory to the wire.

   - Move all the IPv6 routing tables management outside the RTNL scope,
     under its own lock and RCU. The route control path is now 3x times
     faster.

   - Convert queue related netlink ops to instance lock, reducing again
     the scope of the RTNL lock. This improves the control plane
     scalability.

   - Refactor the software crc32c implementation, removing unneeded
     abstraction layers and improving significantly the related
     micro-benchmarks.

   - Optimize the GRO engine for UDP-tunneled traffic, for a 10%
     performance improvement in related stream tests.

   - Cover more per-CPU storage with local nested BH locking; this is a
     prep work to remove the current per-CPU lock in local_bh_disable()
     on PREMPT_RT.

   - Introduce and use nlmsg_payload helper, combining buffer bounds
     verification with accessing payload carried by netlink messages.

  Netfilter:

   - Rewrite the procfs conntrack table implementation, improving
     considerably the dump performance. A lot of user-space tools still
     use this interface.

   - Implement support for wildcard netdevice in netdev basechain and
     flowtables.

   - Integrate conntrack information into nft trace infrastructure.

   - Export set count and backend name to userspace, for better
     introspection.

  BPF:

   - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
     programs and can be controlled in similar way to traditional qdiscs
     using the "tc qdisc" command.

   - Refactor the UDP socket iterator, addressing long standing issues
     WRT duplicate hits or missed sockets.

  Protocols:

   - Improve TCP receive buffer auto-tuning and increase the default
     upper bound for the receive buffer; overall this improves the
     single flow maximum thoughput on 200Gbs link by over 60%.

   - Add AFS GSSAPI security class to AF_RXRPC; it provides transport
     security for connections to the AFS fileserver and VL server.

   - Improve TCP multipath routing, so that the sources address always
     matches the nexthop device.

   - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
     and thus preventing DoS caused by passing around problematic FDs.

   - Retire DCCP socket. DCCP only receives updates for bugs, and major
     distros disable it by default. Its removal allows for better
     organisation of TCP fields to reduce the number of cache lines hit
     in the fast path.

   - Extend TCP drop-reason support to cover PAWS checks.

  Driver API:

   - Reorganize PTP ioctl flag support to require an explicit opt-in for
     the drivers, avoiding the problem of drivers not rejecting new
     unsupported flags.

   - Converted several device drivers to timestamping APIs.

   - Introduce per-PHY ethtool dump helpers, improving the support for
     dump operations targeting PHYs.

  Tests and tooling:

   - Add support for classic netlink in user space C codegen, so that
     ynl-c can now read, create and modify links, routes addresses and
     qdisc layer configuration.

   - Add ynl sub-types for binary attributes, allowing ynl-c to output
     known struct instead of raw binary data, clarifying the classic
     netlink output.

   - Extend MPTCP selftests to improve the code-coverage.

   - Add tests for XDP tail adjustment in AF_XDP.

  New hardware / drivers:

   - OpenVPN virtual driver: offload OpenVPN data channels processing to
     the kernel-space, increasing the data transfer throughput WRT the
     user-space implementation.

   - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.

   - Broadcom asp-v3.0 ethernet driver.

   - AMD Renoir ethernet device.

   - ReakTek MT9888 2.5G ethernet PHY driver.

   - Aeonsemi 10G C45 PHYs driver.

  Drivers:

   - Ethernet high-speed NICs:
       - nVidia/Mellanox (mlx5):
           - refactor the steering table handling to significantly
             reduce the amount of memory used
           - add support for complex matches in H/W flow steering
           - improve flow streeing error handling
           - convert to netdev instance locking
       - Intel (100G, ice, igb, ixgbe, idpf):
           - ice: add switchdev support for LLDP traffic over VF
           - ixgbe: add firmware manipulation and regions devlink support
           - igb: introduce support for frame transmission premption
           - igb: adds persistent NAPI configuration
           - idpf: introduce RDMA support
           - idpf: add initial PTP support
       - Meta (fbnic):
           - extend hardware stats coverage
           - add devlink dev flash support
       - Broadcom (bnxt):
           - add support for RX-side device memory TCP
       - Wangxun (txgbe):
           - implement support for udp tunnel offload
           - complete PTP and SRIOV support for AML 25G/10G devices

   - Ethernet NICs embedded and virtual:
       - Google (gve):
           - add device memory TCP TX support
       - Amazon (ena):
           - support persistent per-NAPI config
       - Airoha:
           - add H/W support for L2 traffic offload
           - add per flow stats for flow offloading
       - RealTek (rtl8211): add support for WoL magic packet
       - Synopsys (stmmac):
           - dwmac-socfpga 1000BaseX support
           - add Loongson-2K3000 support
           - introduce support for hardware-accelerated VLAN stripping
       - Broadcom (bcmgenet):
           - expose more H/W stats
       - Freescale (enetc, dpaa2-eth):
           - enetc: add MAC filter, VLAN filter RSS and loopback support
           - dpaa2-eth: convert to H/W timestamping APIs
       - vxlan: convert FDB table to rhashtable, for better scalabilty
       - veth: apply qdisc backpressure on full ring to reduce TX drops

   - Ethernet switches:
       - Microchip (kzZ88x3): add ETS scheduler support

   - Ethernet PHYs:
       - RealTek (rtl8211):
           - add support for WoL magic packet
           - add support for PHY LEDs

   - CAN:
       - Adds RZ/G3E CANFD support to the rcar_canfd driver.
       - Preparatory work for CAN-XL support.
       - Add self-tests framework with support for CAN physical interfaces.

   - WiFi:
       - mac80211:
           - scan improvements with multi-link operation (MLO)
       - Qualcomm (ath12k):
           - enable AHB support for IPQ5332
           - add monitor interface support to QCN9274
           - add multi-link operation support to WCN7850
           - add 802.11d scan offload support to WCN7850
           - monitor mode for WCN7850, better 6 GHz regulatory
       - Qualcomm (ath11k):
           - restore hibernation support
       - MediaTek (mt76):
           - WiFi-7 improvements
           - implement support for mt7990
       - Intel (iwlwifi):
           - enhanced multi-link single-radio (EMLSR) support on 5 GHz links
           - rework device configuration
       - RealTek (rtw88):
           - improve throughput for RTL8814AU
       - RealTek (rtw89):
           - add multi-link operation support
           - STA/P2P concurrency improvements
           - support different SAR configs by antenna

   - Bluetooth:
       - introduce HCI Driver protocol
       - btintel_pcie: do not generate coredump for diagnostic events
       - btusb: add HCI Drv commands for configuring altsetting
       - btusb: add RTL8851BE device 0x0bda:0xb850
       - btusb: add new VID/PID 13d3/3584 for MT7922
       - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
       - btnxpuart: implement host-wakeup feature"

* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
  selftests/bpf: Fix bpf selftest build warning
  selftests: netfilter: Fix skip of wildcard interface test
  net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
  net: openvswitch: Fix the dead loop of MPLS parse
  calipso: Don't call calipso functions for AF_INET sk.
  selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
  net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
  octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
  octeontx2-pf: QOS: Perform cache sync on send queue teardown
  net: mana: Add support for Multi Vports on Bare metal
  net: devmem: ncdevmem: remove unused variable
  net: devmem: ksft: upgrade rx test to send 1K data
  net: devmem: ksft: add 5 tuple FS support
  net: devmem: ksft: add exit_wait to make rx test pass
  net: devmem: ksft: add ipv4 support
  net: devmem: preserve sockc_err
  page_pool: fix ugly page_pool formatting
  net: devmem: move list_add to net_devmem_bind_dmabuf.
  selftests: netfilter: nft_queue.sh: include file transfer duration in log message
  net: phy: mscc: Fix memory leak when using one step timestamping
  ...

PVH dom0 is useless without XEN_UNPOPULATED_ALLOC, as otherwise it will
very likely balloon out all dom0 memory to map foreign and grant pages.

Enable it by default as part of xen.config.  This also requires enabling
MEMORY_HOTREMOVE and ZONE_DEVICE.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250514092037.28970-1-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Recent change [0] resulted in a "BUG: using __this_cpu_read() in
preemptible" splat [1]. PREEMPT kernels have additional requirements
on what can and can not run with/without preemption enabled.
Expose those constrains in the debug kernels.

0: https://lore.kernel.org/netdev/20250314120048.12569-2-justin.iurman@uliege.be/
1: https://lore.kernel.org/netdev/20250402094458.006ba2a7@kernel.org/T/#mbf72641e9d7d274daee9003ef5edf6833201f1bc

Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250402172305.1775226-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull MM updates from Andrew Morton:

 - The series "Enable strict percpu address space checks" from Uros
   Bizjak uses x86 named address space qualifiers to provide
   compile-time checking of percpu area accesses.

   This has caused a small amount of fallout - two or three issues were
   reported. In all cases the calling code was found to be incorrect.

 - The series "Some cleanup for memcg" from Chen Ridong implements some
   relatively monir cleanups for the memcontrol code.

 - The series "mm: fixes for device-exclusive entries (hmm)" from David
   Hildenbrand fixes a boatload of issues which David found then using
   device-exclusive PTE entries when THP is enabled. More work is
   needed, but this makes thins better - our own HMM selftests now
   succeed.

 - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
   remove the z3fold and zbud implementations. They have been deprecated
   for half a year and nobody has complained.

 - The series "mm: further simplify VMA merge operation" from Lorenzo
   Stoakes implements numerous simplifications in this area. No runtime
   effects are anticipated.

 - The series "mm/madvise: remove redundant mmap_lock operations from
   process_madvise()" from SeongJae Park rationalizes the locking in the
   madvise() implementation. Performance gains of 20-25% were observed
   in one MADV_DONTNEED microbenchmark.

 - The series "Tiny cleanup and improvements about SWAP code" from
   Baoquan He contains a number of touchups to issues which Baoquan
   noticed when working on the swap code.

 - The series "mm: kmemleak: Usability improvements" from Catalin
   Marinas implements a couple of improvements to the kmemleak
   user-visible output.

 - The series "mm/damon/paddr: fix large folios access and schemes
   handling" from Usama Arif provides a couple of fixes for DAMON's
   handling of large folios.

 - The series "mm/damon/core: fix wrong and/or useless damos_walk()
   behaviors" from SeongJae Park fixes a few issues with the accuracy of
   kdamond's walking of DAMON regions.

 - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
   Stoakes changes the interaction between framebuffer deferred-io and
   core MM. No functional changes are anticipated - this is preparatory
   work for the future removal of page structure fields.

 - The series "mm/damon: add support for hugepage_size DAMOS filter"
   from Usama Arif adds a DAMOS filter which permits the filtering by
   huge page sizes.

 - The series "mm: permit guard regions for file-backed/shmem mappings"
   from Lorenzo Stoakes extends the guard region feature from its
   present "anon mappings only" state. The feature now covers shmem and
   file-backed mappings.

 - The series "mm: batched unmap lazyfree large folios during
   reclamation" from Barry Song cleans up and speeds up the unmapping
   for pte-mapped large folios.

 - The series "reimplement per-vma lock as a refcount" from Suren
   Baghdasaryan puts the vm_lock back into the vma. Our reasons for
   pulling it out were largely bogus and that change made the code more
   messy. This patchset provides small (0-10%) improvements on one
   microbenchmark.

 - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
   improves" from SeongJae Park does some maintenance work on the DAMON
   docs.

 - The series "hugetlb/CMA improvements for large systems" from Frank
   van der Linden addresses a pile of issues which have been observed
   when using CMA on large machines.

 - The series "mm/damon: introduce DAMOS filter type for unmapped pages"
   from SeongJae Park enables users of DMAON/DAMOS to filter my the
   page's mapped/unmapped status.

 - The series "zsmalloc/zram: there be preemption" from Sergey
   Senozhatsky teaches zram to run its compression and decompression
   operations preemptibly.

 - The series "selftests/mm: Some cleanups from trying to run them" from
   Brendan Jackman fixes a pile of unrelated issues which Brendan
   encountered while runnimg our selftests.

 - The series "fs/proc/task_mmu: add guard region bit to pagemap" from
   Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
   determine whether a particular page is a guard page.

 - The series "mm, swap: remove swap slot cache" from Kairui Song
   removes the swap slot cache from the allocation path - it simply
   wasn't being effective.

 - The series "mm: cleanups for device-exclusive entries (hmm)" from
   David Hildenbrand implements a number of unrelated cleanups in this
   code.

 - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
   implements a number of preparatoty cleanups to the GENERIC_PTDUMP
   Kconfig logic.

 - The series "mm/damon: auto-tune aggregation interval" from SeongJae
   Park implements a feedback-driven automatic tuning feature for
   DAMON's aggregation interval tuning.

 - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
   powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
   preparation for implementing lazy mmu mode for arm64 to optimize
   vmalloc.

 - The series "mm/page_alloc: Some clarifications for migratetype
   fallback" from Brendan Jackman reworks some commentary to make the
   code easier to follow.

 - The series "page_counter cleanup and size reduction" from Shakeel
   Butt cleans up the page_counter code and fixes a size increase which
   we accidentally added late last year.

 - The series "Add a command line option that enables control of how
   many threads should be used to allocate huge pages" from Thomas
   Prescher does that. It allows the careful operator to significantly
   reduce boot time by tuning the parallalization of huge page
   initialization.

 - The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
   from Tang Yizhou fixes the tracing output from the dirty page
   balancing code.

 - The series "mm/damon: make allow filters after reject filters useful
   and intuitive" from SeongJae Park improves the handling of allow and
   reject filters. Behaviour is made more consistent and the documention
   is updated accordingly.

 - The series "Switch zswap to object read/write APIs" from Yosry Ahmed
   updates zswap to the new object read/write APIs and thus permits the
   removal of some legacy code from zpool and zsmalloc.

 - The series "Some trivial cleanups for shmem" from Baolin Wang does as
   it claims.

 - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
   Alistair Popple regularizes the weird ZONE_DEVICE page refcount
   handling in DAX, permittig the removal of a number of special-case
   checks.

 - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
   preparatoty refactoring and cleanup of the mremap() code.

 - The series "mm: MM owner tracking for large folios (!hugetlb) +
   CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
   which we determine whether a large folio is known to be mapped
   exclusively into a single MM.

 - The series "mm/damon: add sysfs dirs for managing DAMOS filters based
   on handling layers" from SeongJae Park adds a couple of new sysfs
   directories to ease the management of DAMON/DAMOS filters.

 - The series "arch, mm: reduce code duplication in mem_init()" from
   Mike Rapoport consolidates many per-arch implementations of
   mem_init() into code generic code, where that is practical.

 - The series "mm/damon/sysfs: commit parameters online via
   damon_call()" from SeongJae Park continues the cleaning up of sysfs
   access to DAMON internal data.

 - The series "mm: page_ext: Introduce new iteration API" from Luiz
   Capitulino reworks the page_ext initialization to fix a boot-time
   crash which was observed with an unusual combination of compile and
   cmdline options.

 - The series "Buddy allocator like (or non-uniform) folio split" from
   Zi Yan reworks the code to split a folio into smaller folios. The
   main benefit is lessened memory consumption: fewer post-split folios
   are generated.

 - The series "Minimize xa_node allocation during xarry split" from Zi
   Yan reduces the number of xarray xa_nodes which are generated during
   an xarray split.

 - The series "drivers/base/memory: Two cleanups" from Gavin Shan
   performs some maintenance work on the drivers/base/memory code.

 - The series "Add tracepoints for lowmem reserves, watermarks and
   totalreserve_pages" from Martin Liu adds some more tracepoints to the
   page allocator code.

 - The series "mm/madvise: cleanup requests validations and
   classifications" from SeongJae Park cleans up some warts which
   SeongJae observed during his earlier madvise work.

 - The series "mm/hwpoison: Fix regressions in memory failure handling"
   from Shuai Xue addresses two quite serious regressions which Shuai
   has observed in the memory-failure implementation.

 - The series "mm: reliable huge page allocator" from Johannes Weiner
   makes huge page allocations cheaper and more reliable by reducing
   fragmentation.

 - The series "Minor memcg cleanups & prep for memdescs" from Matthew
   Wilcox is preparatory work for the future implementation of memdescs.

 - The series "track memory used by balloon drivers" from Nico Pache
   introduces a way to track memory used by our various balloon drivers.

 - The series "mm/damon: introduce DAMOS filter type for active pages"
   from Nhat Pham permits users to filter for active/inactive pages,
   separately for file and anon pages.

 - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
   separates the proactive reclaim statistics from the direct reclaim
   statistics.

 - The series "mm/vmscan: don't try to reclaim hwpoison folio" from
   Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
   code.

* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
  mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
  x86/mm: restore early initialization of high_memory for 32-bits
  mm/vmscan: don't try to reclaim hwpoison folio
  mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
  cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
  mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
  selftests/mm: speed up split_huge_page_test
  selftests/mm: uffd-unit-tests support for hugepages > 2M
  docs/mm/damon/design: document active DAMOS filter type
  mm/damon: implement a new DAMOS filter type for active pages
  fs/dax: don't disassociate zero page entries
  MM documentation: add "Unaccepted" meminfo entry
  selftests/mm: add commentary about 9pfs bugs
  fork: use __vmalloc_node() for stack allocation
  docs/mm: Physical Memory: Populate the "Zones" section
  xen: balloon: update the NR_BALLOON_PAGES state
  hv_balloon: update the NR_BALLOON_PAGES state
  balloon_compaction: update the NR_BALLOON_PAGES state
  meminfo: add a per node counter for balloon drivers
  mm: remove references to folio in __memcg_kmem_uncharge_page()
  ...