linux.git/kernel/cpu.c, branch v4.14.98

x86/speculation: Rework SMT state change

2018-12-05T18:41:20+00:00

commit a74cfffb03b73d41e08f84c2e5c87dec0ce3db9f upstream

arch_smt_update() is only called when the sysfs SMT control knob is
changed. This means that when SMT is enabled in the sysfs control knob the
system is considered to have SMT active even if all siblings are offline.

To allow finegrained control of the speculation mitigations, the actual SMT
state is more interesting than the fact that siblings could be enabled.

Rework the code, so arch_smt_update() is invoked from each individual CPU
hotplug function, and simplify the update function while at it.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Andy Lutomirski 
Cc: Linus Torvalds 
Cc: Jiri Kosina 
Cc: Tom Lendacky 
Cc: Josh Poimboeuf 
Cc: Andrea Arcangeli 
Cc: David Woodhouse 
Cc: Tim Chen 
Cc: Andi Kleen 
Cc: Dave Hansen 
Cc: Casey Schaufler 
Cc: Asit Mallick 
Cc: Arjan van de Ven 
Cc: Jon Masters 
Cc: Waiman Long 
Cc: Greg KH 
Cc: Dave Stewart 
Cc: Kees Cook 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185004.521974984@linutronix.de
Signed-off-by: Greg Kroah-Hartman

x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation

2018-12-05T18:41:18+00:00

commit 53c613fe6349994f023245519265999eed75957f upstream

STIBP is a feature provided by certain Intel ucodes / CPUs. This feature
(once enabled) prevents cross-hyperthread control of decisions made by
indirect branch predictors.

Enable this feature if

- the CPU is vulnerable to spectre v2
- the CPU supports SMT and has SMT siblings online
- spectre_v2 mitigation autoselection is enabled (default)

After some previous discussion, this leaves STIBP on all the time, as wrmsr
on crossing kernel boundary is a no-no. This could perhaps later be a bit
more optimized (like disabling it in NOHZ, experiment with disabling it in
idle, etc) if needed.

Note that the synchronization of the mask manipulation via newly added
spec_ctrl_mutex is currently not strictly needed, as the only updater is
already being serialized by cpu_add_remove_lock, but let's make this a
little bit more future-proof.

Signed-off-by: Jiri Kosina 
Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: Josh Poimboeuf 
Cc: Andrea Arcangeli 
Cc:  "WoodhouseDavid" 
Cc: Andi Kleen 
Cc: Tim Chen 
Cc:  "SchauflerCasey" 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1809251438240.15880@cbobk.fhfr.pm
Signed-off-by: Greg Kroah-Hartman

Revert "x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation"

2018-11-23T07:19:27+00:00

This reverts commit 8a13906ae519b3ed95cd0fb73f1098b46362f6c4 which is
commit 53c613fe6349994f023245519265999eed75957f upstream.

It's not ready for the stable trees as there are major slowdowns
involved with this patch.

Reported-by: Jiri Kosina 
Cc: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: Josh Poimboeuf 
Cc: Andrea Arcangeli 
Cc:  "WoodhouseDavid" 
Cc: Andi Kleen 
Cc: Tim Chen 
Cc:  "SchauflerCasey" 
Signed-off-by: Greg Kroah-Hartman

x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation

2018-11-13T19:14:47+00:00

commit 53c613fe6349994f023245519265999eed75957f upstream.

STIBP is a feature provided by certain Intel ucodes / CPUs. This feature
(once enabled) prevents cross-hyperthread control of decisions made by
indirect branch predictors.

Enable this feature if

- the CPU is vulnerable to spectre v2
- the CPU supports SMT and has SMT siblings online
- spectre_v2 mitigation autoselection is enabled (default)

After some previous discussion, this leaves STIBP on all the time, as wrmsr
on crossing kernel boundary is a no-no. This could perhaps later be a bit
more optimized (like disabling it in NOHZ, experiment with disabling it in
idle, etc) if needed.

Note that the synchronization of the mask manipulation via newly added
spec_ctrl_mutex is currently not strictly needed, as the only updater is
already being serialized by cpu_add_remove_lock, but let's make this a
little bit more future-proof.

Signed-off-by: Jiri Kosina 
Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: Josh Poimboeuf 
Cc: Andrea Arcangeli 
Cc:  "WoodhouseDavid" 
Cc: Andi Kleen 
Cc: Tim Chen 
Cc:  "SchauflerCasey" 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1809251438240.15880@cbobk.fhfr.pm
Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Prevent state corruption on error rollback

2018-09-19T20:43:36+00:00

commit 69fa6eb7d6a64801ea261025cce9723d9442d773 upstream.

When a teardown callback fails, the CPU hotplug code brings the CPU back to
the previous state. The previous state becomes the new target state. The
rollback happens in undo_cpu_down() which increments the state
unconditionally even if the state is already the same as the target.

As a consequence the next CPU hotplug operation will start at the wrong
state. This is easily to observe when __cpu_disable() fails.

Prevent the unconditional undo by checking the state vs. target before
incrementing state and fix up the consequently wrong conditional in the
unplug code which handles the failure of the final CPU take down on the
control CPU side.

Fixes: 4dddfb5faa61 ("smp/hotplug: Rewrite AP state machine core")
Reported-by: Neeraj Upadhyay 
Signed-off-by: Thomas Gleixner 
Tested-by: Geert Uytterhoeven 
Tested-by: Sudeep Holla 
Tested-by: Neeraj Upadhyay 
Cc: josh@joshtriplett.org
Cc: peterz@infradead.org
Cc: jiangshanlai@gmail.com
Cc: dzickus@redhat.com
Cc: brendan.jackman@arm.com
Cc: malat@debian.org
Cc: sramana@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1809051419580.1416@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman 

----

cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun()

2018-09-19T20:43:36+00:00

commit f8b7530aa0a1def79c93101216b5b17cf408a70a upstream.

The smp_mb() in cpuhp_thread_fun() is misplaced. It needs to be after the
load of st->should_run to prevent reordering of the later load/stores
w.r.t. the load of st->should_run.

Fixes: 4dddfb5faa61 ("smp/hotplug: Rewrite AP state machine core")
Signed-off-by: Neeraj Upadhyay 
Signed-off-by: Thomas Gleixner 
Acked-by: Peter Zijlstra (Intel) 
Cc: josh@joshtriplett.org
Cc: peterz@infradead.org
Cc: jiangshanlai@gmail.com
Cc: dzickus@redhat.com
Cc: brendan.jackman@arm.com
Cc: malat@debian.org
Cc: mojha@codeaurora.org
Cc: sramana@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1536126727-11629-1-git-send-email-neeraju@codeaurora.org
Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Non-SMP machines do not make use of booted_once

2018-08-15T16:13:01+00:00

commit 269777aa530f3438ec1781586cdac0b5fe47b061 upstream.

Commit 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")
breaks non-SMP builds.

[ I suspect the 'bool' fields should just be made to be bitfields and be
  exposed regardless of configuration, but that's a separate cleanup
  that I'll leave to the owners of this file for later.   - Linus ]

Fixes: 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")
Cc: Dave Hansen 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Signed-off-by: Abel Vesa 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Fix SMT supported evaluation

2018-08-15T16:13:00+00:00

commit bc2d8d262cba5736332cbc866acb11b1c5748aa9 upstream

Josh reported that the late SMT evaluation in cpu_smt_state_init() sets
cpu_smt_control to CPU_SMT_NOT_SUPPORTED in case that 'nosmt' was supplied
on the kernel command line as it cannot differentiate between SMT disabled
by BIOS and SMT soft disable via 'nosmt'. That wreckages the state and
makes the sysfs interface unusable.

Rework this so that during bringup of the non boot CPUs the availability of
SMT is determined in cpu_smt_allowed(). If a newly booted CPU is not a
'primary' thread then set the local cpu_smt_available marker and evaluate
this explicitely right after the initial SMP bringup has finished.

SMT evaulation on x86 is a trainwreck as the firmware has all the
information _before_ booting the kernel, but there is no interface to query
it.

Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS")
Reported-by: Josh Poimboeuf 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: detect SMT disabled by BIOS

2018-08-15T16:12:57+00:00

commit 73d5e2b472640b1fcdb61ae8be389912ef211bda upstream

If SMT is disabled in BIOS, the CPU code doesn't properly detect it.
The /sys/devices/system/cpu/smt/control file shows 'on', and the 'l1tf'
vulnerabilities file shows SMT as vulnerable.

Fix it by forcing 'cpu_smt_control' to CPU_SMT_NOT_SUPPORTED in such a
case.  Unfortunately the detection can only be done after bringing all
the CPUs online, so we have to overwrite any previous writes to the
variable.

Reported-by: Joe Mario 
Tested-by: Jiri Kosina 
Fixes: f048c399e0f7 ("x86/topology: Provide topology_smt_supported()")
Signed-off-by: Josh Poimboeuf 
Signed-off-by: Peter Zijlstra 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Set CPU_SMT_NOT_SUPPORTED early

2018-08-15T16:12:56+00:00

commit fee0aede6f4739c87179eca76136f83210953b86 upstream

The CPU_SMT_NOT_SUPPORTED state is set (if the processor does not support
SMT) when the sysfs SMT control file is initialized.

That was fine so far as this was only required to make the output of the
control file correct and to prevent writes in that case.

With the upcoming l1tf command line parameter, this needs to be set up
before the L1TF mitigation selection and command line parsing happens.

Signed-off-by: Thomas Gleixner 
Tested-by: Jiri Kosina 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Josh Poimboeuf 
Link: https://lkml.kernel.org/r/20180713142323.121795971@linutronix.de
Signed-off-by: Greg Kroah-Hartman