linux.git/kernel/dma/swiotlb.c, branch v5.10.258 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git swiotlb: max mapping size takes min align mask into account 2022-10-05T08:38:40+00:00 Tianyu Lan Tianyu.Lan@microsoft.com 2022-05-10T14:21:09+00:00 625899cd06e1b4a12b374b09354404e52457da6a commit 82806744fd7dde603b64c151eeddaa4ee62193fd upstream. swiotlb_find_slots() skips slots according to io tlb aligned mask calculated from min aligned mask and original physical address offset. This affects max mapping size. The mapping size can't achieve the IO_TLB_SEGSIZE * IO_TLB_SIZE when original offset is non-zero. This will cause system boot up failure in Hyper-V Isolation VM where swiotlb force is enabled. Scsi layer use return value of dma_max_mapping_size() to set max segment size and it finally calls swiotlb_max_mapping_size(). Hyper-V storage driver sets min align mask to 4k - 1. Scsi layer may pass 256k length of request buffer with 0~4k offset and Hyper-V storage driver can't get swiotlb bounce buffer via DMA API. Swiotlb_find_slots() can't find 256k length bounce buffer with offset. Make swiotlb_max_mapping _size() take min align mask into account. Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 82806744fd7dde603b64c151eeddaa4ee62193fd upstream.

swiotlb_find_slots() skips slots according to io tlb aligned mask
calculated from min aligned mask and original physical address
offset. This affects max mapping size. The mapping size can't
achieve the IO_TLB_SEGSIZE * IO_TLB_SIZE when original offset is
non-zero. This will cause system boot up failure in Hyper-V
Isolation VM where swiotlb force is enabled. Scsi layer use return
value of dma_max_mapping_size() to set max segment size and it
finally calls swiotlb_max_mapping_size(). Hyper-V storage driver
sets min align mask to 4k - 1. Scsi layer may pass 256k length of
request buffer with 0~4k offset and Hyper-V storage driver can't
get swiotlb bounce buffer via DMA API. Swiotlb_find_slots() can't
find 256k length bounce buffer with offset. Make swiotlb_max_mapping
_size() take min align mask into account.

Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
swiotlb: avoid potential left shift overflow 2022-09-15T09:32:06+00:00 Chao Gao chao.gao@intel.com 2022-08-19T08:45:37+00:00 1a2742552372585e3c865ce6837624f320985ef6 [ Upstream commit 3f0461613ebcdc8c4073e235053d06d5aa58750f ] The second operand passed to slot_addr() is declared as int or unsigned int in all call sites. The left-shift to get the offset of a slot can overflow if swiotlb size is larger than 4G. Convert the macro to an inline function and declare the second argument as phys_addr_t to avoid the potential overflow. Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single") Signed-off-by: Chao Gao <chao.gao@intel.com> Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3f0461613ebcdc8c4073e235053d06d5aa58750f ]

The second operand passed to slot_addr() is declared as int or unsigned int
in all call sites. The left-shift to get the offset of a slot can overflow
if swiotlb size is larger than 4G.

Convert the macro to an inline function and declare the second argument as
phys_addr_t to avoid the potential overflow.

Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single")
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE"" 2022-05-25T07:17:55+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-03-28T18:37:05+00:00 f3f2247ac31cb71d1f05f56536df5946c6652f4a [ Upstream commit 901c7280ca0d5e2b4a8929fbe0bfb007ac2a6544 ] Halil Pasic points out [1] that the full revert of that commit (revert in bddac7c1e02b), and that a partial revert that only reverts the problematic case, but still keeps some of the cleanups is probably better.  And that partial revert [2] had already been verified by Oleksandr Natalenko to also fix the issue, I had just missed that in the long discussion. So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb: rework "fix info leak with DMA_FROM_DEVICE""), and effectively only revert the part that caused problems. Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1] Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2] Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3] Suggested-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Christoph Hellwig" <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 901c7280ca0d5e2b4a8929fbe0bfb007ac2a6544 ]

Halil Pasic points out [1] that the full revert of that commit (revert
in bddac7c1e02b), and that a partial revert that only reverts the
problematic case, but still keeps some of the cleanups is probably
better.  

And that partial revert [2] had already been verified by Oleksandr
Natalenko to also fix the issue, I had just missed that in the long
discussion.

So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb:
rework "fix info leak with DMA_FROM_DEVICE""), and effectively only
revert the part that caused problems.

Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1]
Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2]
Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3]
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Christoph Hellwig" <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert "swiotlb: fix info leak with DMA_FROM_DEVICE" 2022-05-25T07:17:55+00:00 Sasha Levin sashal@kernel.org 2022-05-18T19:28:18+00:00 e2cfa7b0935c2445cd7a2919f91831a0f9821c3d This reverts commit d4d975e7921079f877f828099bb8260af335508f. Upstream had a follow-up fix, revert, and a semi-reverted-revert. Instead of going through this chain which is more painful to backport, I'm just going to revert this original commit and pick the final one. Signed-off-by: Sasha Levin <sashal@kernel.org> 
This reverts commit d4d975e7921079f877f828099bb8260af335508f.

Upstream had a follow-up fix, revert, and a semi-reverted-revert.
Instead of going through this chain which is more painful to backport,
I'm just going to revert this original commit and pick the final one.

Signed-off-by: Sasha Levin <sashal@kernel.org>
swiotlb: fix info leak with DMA_FROM_DEVICE 2022-04-08T12:39:46+00:00 Halil Pasic pasic@linux.ibm.com 2022-02-11T01:12:52+00:00 d4d975e7921079f877f828099bb8260af335508f commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e upstream. The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e upstream.

The problem I'm addressing was discovered by the LTP test covering
cve-2018-1000204.

A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
   interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
   and a corresponding dxferp. The peculiar thing about this is that TUR
   is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
   bounces the user-space buffer. As if the device was to transfer into
   it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in
   sg_build_indirect()") we make sure this first bounce buffer is
   allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
   device won't touch the buffer we prepare as if the we had a
   DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
   and the  buffer allocated by SG is mapped by the function
   virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
   scatter-gather and not scsi generics). This mapping involves bouncing
   via the swiotlb (we need swiotlb to do virtio in protected guest like
   s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
   (that is swiotlb) bounce buffer (which most likely contains some
   previous IO data), to the first bounce buffer, which contains all
   zeros.  Then we copy back the content of the first bounce buffer to
   the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
  ain't all zeros and fails.

One can argue that this is an swiotlb problem, because without swiotlb
we leak all zeros, and the swiotlb should be transparent in a sense that
it does not affect the outcome (if all other participants are well
behaved).

Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that if in doubt, but allow the driver
to tell us that the whole mapped buffer is going to be overwritten,
in which case we can preserve the old behavior and avoid the performance
impact of the extra bounce.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
swiotlb: manipulate orig_addr when tlb_addr has offset 2021-06-30T12:47:29+00:00 Bumyong Lee bumyong.lee@samsung.com 2021-05-10T09:10:04+00:00 e6108147dd91b94d1979b110f265710c254c99d5 commit 5f89468e2f060031cd89fd4287298e0eaf246bf6 upstream. in case of driver wants to sync part of ranges with offset, swiotlb_tbl_sync_single() copies from orig_addr base to tlb_addr with offset and ends up with data mismatch. It was removed from "swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single", but said logic has to be added back in. From Linus's email: "That commit which the removed the offset calculation entirely, because the old (unsigned long)tlb_addr & (IO_TLB_SIZE - 1) was wrong, but instead of removing it, I think it should have just fixed it to be (tlb_addr - mem->start) & (IO_TLB_SIZE - 1); instead. That way the slot offset always matches the slot index calculation." (Unfortunatly that broke NVMe). The use-case that drivers are hitting is as follow: 1. Get dma_addr_t from dma_map_single() dma_addr_t tlb_addr = dma_map_single(dev, vaddr, vsize, DMA_TO_DEVICE); |<---------------vsize------------->| +-----------------------------------+ | | original buffer +-----------------------------------+ vaddr swiotlb_align_offset |<----->|<---------------vsize------------->| +-------+-----------------------------------+ | | | swiotlb buffer +-------+-----------------------------------+ tlb_addr 2. Do something 3. Sync dma_addr_t through dma_sync_single_for_device(..) dma_sync_single_for_device(dev, tlb_addr + offset, size, DMA_TO_DEVICE); Error case. Copy data to original buffer but it is from base addr (instead of base addr + offset) in original buffer: swiotlb_align_offset |<----->|<- offset ->|<- size ->| +-------+-----------------------------------+ | | |##########| | swiotlb buffer +-------+-----------------------------------+ tlb_addr |<- size ->| +-----------------------------------+ |##########| | original buffer +-----------------------------------+ vaddr The fix is to copy the data to the original buffer and take into account the offset, like so: swiotlb_align_offset |<----->|<- offset ->|<- size ->| +-------+-----------------------------------+ | | |##########| | swiotlb buffer +-------+-----------------------------------+ tlb_addr |<- offset ->|<- size ->| +-----------------------------------+ | |##########| | original buffer +-----------------------------------+ vaddr [One fix which was Linus's that made more sense to as it created a symmetry would break NVMe. The reason for that is the: unsigned int offset = (tlb_addr - mem->start) & (IO_TLB_SIZE - 1); would come up with the proper offset, but it would lose the alignment (which this patch contains).] Fixes: 16fc3cef33a0 ("swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single") Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com> Reported-by: Horia Geantă <horia.geanta@nxp.com> Tested-by: Horia Geantă <horia.geanta@nxp.com> CC: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5f89468e2f060031cd89fd4287298e0eaf246bf6 upstream.

in case of driver wants to sync part of ranges with offset,
swiotlb_tbl_sync_single() copies from orig_addr base to tlb_addr with
offset and ends up with data mismatch.

It was removed from
"swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single",
but said logic has to be added back in.

From Linus's email:
"That commit which the removed the offset calculation entirely, because the old

        (unsigned long)tlb_addr & (IO_TLB_SIZE - 1)

was wrong, but instead of removing it, I think it should have just
fixed it to be

        (tlb_addr - mem->start) & (IO_TLB_SIZE - 1);

instead. That way the slot offset always matches the slot index calculation."

(Unfortunatly that broke NVMe).

The use-case that drivers are hitting is as follow:

1. Get dma_addr_t from dma_map_single()

dma_addr_t tlb_addr = dma_map_single(dev, vaddr, vsize, DMA_TO_DEVICE);

    |<---------------vsize------------->|
    +-----------------------------------+
    |                                   | original buffer
    +-----------------------------------+
  vaddr

 swiotlb_align_offset
     |<----->|<---------------vsize------------->|
     +-------+-----------------------------------+
     |       |                                   | swiotlb buffer
     +-------+-----------------------------------+
          tlb_addr

2. Do something
3. Sync dma_addr_t through dma_sync_single_for_device(..)

dma_sync_single_for_device(dev, tlb_addr + offset, size, DMA_TO_DEVICE);

  Error case.
    Copy data to original buffer but it is from base addr (instead of
  base addr + offset) in original buffer:

 swiotlb_align_offset
     |<----->|<- offset ->|<- size ->|
     +-------+-----------------------------------+
     |       |            |##########|           | swiotlb buffer
     +-------+-----------------------------------+
          tlb_addr

    |<- size ->|
    +-----------------------------------+
    |##########|                        | original buffer
    +-----------------------------------+
  vaddr

The fix is to copy the data to the original buffer and take into
account the offset, like so:

 swiotlb_align_offset
     |<----->|<- offset ->|<- size ->|
     +-------+-----------------------------------+
     |       |            |##########|           | swiotlb buffer
     +-------+-----------------------------------+
          tlb_addr

    |<- offset ->|<- size ->|
    +-----------------------------------+
    |            |##########|           | original buffer
    +-----------------------------------+
  vaddr

[One fix which was Linus's that made more sense to as it created a
symmetry would break NVMe. The reason for that is the:
 unsigned int offset = (tlb_addr - mem->start) & (IO_TLB_SIZE - 1);

would come up with the proper offset, but it would lose the
alignment (which this patch contains).]

Fixes: 16fc3cef33a0 ("swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single")
Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com>
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
CC: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
swiotlb: Fix the type of index 2021-05-19T08:13:04+00:00 Claire Chang tientzu@chromium.org 2021-04-22T08:14:53+00:00 a01572e21f0941a1c8b7d39369fec3bd9b7e5e85 [ Upstream commit 95b079d8215b83b37fa59341fda92fcb9392f14a ] Fix the type of index from unsigned int to int since find_slots() might return -1. Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Claire Chang <tientzu@chromium.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 95b079d8215b83b37fa59341fda92fcb9392f14a ]

Fix the type of index from unsigned int to int since find_slots() might
return -1.

Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
swiotlb: respect min_align_mask 2021-05-07T09:04:32+00:00 Jianxiong Gao jxgao@google.com 2021-04-29T17:33:14+00:00 f8e71c667ee12094b50f5a935133d080740cd66b commit: 1f221a0d0dbf0e48ef3a9c62871281d6a7819f05 swiotlb: respect min_align_mask Respect the min_align_mask in struct device_dma_parameters in swiotlb. There are two parts to it: 1) for the lower bits of the alignment inside the io tlb slot, just extent the size of the allocation and leave the start of the slot empty 2) for the high bits ensure we find a slot that matches the high bits of the alignment to avoid wasting too much memory Based on an earlier patch from Jianxiong Gao <jxgao@google.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jianxiong Gao <jxgao@google.com> Tested-by: Jianxiong Gao <jxgao@google.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jianxiong Gao <jxgao@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit: 1f221a0d0dbf0e48ef3a9c62871281d6a7819f05

swiotlb: respect min_align_mask

Respect the min_align_mask in struct device_dma_parameters in swiotlb.

There are two parts to it:
 1) for the lower bits of the alignment inside the io tlb slot, just
    extent the size of the allocation and leave the start of the slot
     empty
 2) for the high bits ensure we find a slot that matches the high bits
    of the alignment to avoid wasting too much memory

Based on an earlier patch from Jianxiong Gao <jxgao@google.com>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single 2021-05-07T09:04:32+00:00 Jianxiong Gao jxgao@google.com 2021-04-29T17:33:13+00:00 85a5a6875ca93dc4efbf20df942ba41d27a917e3 commit: 16fc3cef33a04632ab6b31758abdd77563a20759 swiotlb_tbl_map_single currently nevers sets a tlb_addr that is not aligned to the tlb bucket size. But we're going to add such a case soon, for which this adjustment would be bogus. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jianxiong Gao <jxgao@google.com> Tested-by: Jianxiong Gao <jxgao@google.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jianxiong Gao <jxgao@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit: 16fc3cef33a04632ab6b31758abdd77563a20759

swiotlb_tbl_map_single currently nevers sets a tlb_addr that is not
aligned to the tlb bucket size.  But we're going to add such a case
soon, for which this adjustment would be bogus.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
swiotlb: refactor swiotlb_tbl_map_single 2021-05-07T09:04:32+00:00 Jianxiong Gao jxgao@google.com 2021-04-29T17:33:12+00:00 25ed8827cfbf017ffcd195258643c54b55db08c5 commit: 26a7e094783d482f3e125f09945a5bb1d867b2e6 Split out a bunch of a self-contained helpers to make the function easier to follow. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jianxiong Gao <jxgao@google.com> Tested-by: Jianxiong Gao <jxgao@google.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jianxiong Gao <jxgao@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit: 26a7e094783d482f3e125f09945a5bb1d867b2e6

Split out a bunch of a self-contained helpers to make the function easier
to follow.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jianxiong Gao <jxgao@google.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>