linux.git/kernel/dma, branch v5.10.194

dma-remap: use kvmalloc_array/kvfree for larger dma memory remap

2023-08-26T13:26:43+00:00

[ Upstream commit 51ff97d54f02b4444dfc42e380ac4c058e12d5dd ]

If dma_direct_alloc() alloc memory in size of 64MB, the inner function
dma_common_contiguous_remap() will allocate 128KB memory by invoking
the function kmalloc_array(). and the kmalloc_array seems to fail to try to
allocate 128KB mem.

Call trace:
[14977.928623] qcrosvm: page allocation failure: order:5, mode:0x40cc0
[14977.928638] dump_backtrace.cfi_jt+0x0/0x8
[14977.928647] dump_stack_lvl+0x80/0xb8
[14977.928652] warn_alloc+0x164/0x200
[14977.928657] __alloc_pages_slowpath+0x9f0/0xb4c
[14977.928660] __alloc_pages+0x21c/0x39c
[14977.928662] kmalloc_order+0x48/0x108
[14977.928666] kmalloc_order_trace+0x34/0x154
[14977.928668] __kmalloc+0x548/0x7e4
[14977.928673] dma_direct_alloc+0x11c/0x4f8
[14977.928678] dma_alloc_attrs+0xf4/0x138
[14977.928680] gh_vm_ioctl_set_fw_name+0x3c4/0x610 [gunyah]
[14977.928698] gh_vm_ioctl+0x90/0x14c [gunyah]
[14977.928705] __arm64_sys_ioctl+0x184/0x210

work around by doing kvmalloc_array instead.

Signed-off-by: Gao Xu 
Reviewed-by: Suren Baghdasaryan 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

swiotlb: max mapping size takes min align mask into account

2022-10-05T08:38:40+00:00

commit 82806744fd7dde603b64c151eeddaa4ee62193fd upstream.

swiotlb_find_slots() skips slots according to io tlb aligned mask
calculated from min aligned mask and original physical address
offset. This affects max mapping size. The mapping size can't
achieve the IO_TLB_SEGSIZE * IO_TLB_SIZE when original offset is
non-zero. This will cause system boot up failure in Hyper-V
Isolation VM where swiotlb force is enabled. Scsi layer use return
value of dma_max_mapping_size() to set max segment size and it
finally calls swiotlb_max_mapping_size(). Hyper-V storage driver
sets min align mask to 4k - 1. Scsi layer may pass 256k length of
request buffer with 0~4k offset and Hyper-V storage driver can't
get swiotlb bounce buffer via DMA API. Swiotlb_find_slots() can't
find 256k length bounce buffer with offset. Make swiotlb_max_mapping
_size() take min align mask into account.

Signed-off-by: Tianyu Lan 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Rishabh Bhatnagar 
Signed-off-by: Greg Kroah-Hartman

swiotlb: avoid potential left shift overflow

2022-09-15T09:32:06+00:00

[ Upstream commit 3f0461613ebcdc8c4073e235053d06d5aa58750f ]

The second operand passed to slot_addr() is declared as int or unsigned int
in all call sites. The left-shift to get the offset of a slot can overflow
if swiotlb size is larger than 4G.

Convert the macro to an inline function and declare the second argument as
phys_addr_t to avoid the potential overflow.

Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single")
Signed-off-by: Chao Gao 
Reviewed-by: Dongli Zhang 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

dma-direct: don't over-decrypt memory

2022-06-22T12:13:20+00:00

commit 4a37f3dd9a83186cb88d44808ab35b78375082c9 upstream.

The original x86 sev_alloc() only called set_memory_decrypted() on
memory returned by alloc_pages_node(), so the page order calculation
fell out of that logic. However, the common dma-direct code has several
potential allocators, not all of which are guaranteed to round up the
underlying allocation to a power-of-two size, so carrying over that
calculation for the encryption/decryption size was a mistake. Fix it by
rounding to a *number* of pages, rather than an order.

Until recently there was an even worse interaction with DMA_DIRECT_REMAP
where we could have ended up decrypting part of the next adjacent
vmalloc area, only averted by no architecture actually supporting both
configs at once. Don't ask how I found that one out...

Fixes: c10f07aa27da ("dma/direct: Handle force decryption for DMA coherent buffers in common code")
Signed-off-by: Robin Murphy 
Signed-off-by: Christoph Hellwig 
Acked-by: David Rientjes 
[ backport the functional change without all the prior refactoring ]
Signed-off-by: Robin Murphy 
Signed-off-by: Greg Kroah-Hartman

dma-debug: make things less spammy under memory pressure

2022-06-22T12:13:13+00:00

[ Upstream commit e19f8fa6ce1ca9b8b934ba7d2e8f34c95abc6e60 ]

Limit the error msg to avoid flooding the console.  If you have a lot of
threads hitting this at once, they could have already gotten passed the
dma_debug_disabled() check before they get to the point of allocation
failure, resulting in quite a lot of this error message spamming the
log.  Use pr_err_once() to limit that.

Signed-off-by: Rob Clark 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC

2022-06-09T08:20:54+00:00

[ Upstream commit 84bc4f1dbbbb5f8aa68706a96711dccb28b518e5 ]

We observed the error "cacheline tracking ENOMEM, dma-debug disabled"
during a light system load (copying some files). The reason for this error
is that the dma_active_cacheline radix tree uses GFP_NOWAIT allocation -
so it can't access the emergency memory reserves and it fails as soon as
anybody reaches the watermark.

This patch changes GFP_NOWAIT to GFP_ATOMIC, so that it can access the
emergency memory reserves.

Signed-off-by: Mikulas Patocka 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""

2022-05-25T07:17:55+00:00

[ Upstream commit 901c7280ca0d5e2b4a8929fbe0bfb007ac2a6544 ]

Halil Pasic points out [1] that the full revert of that commit (revert
in bddac7c1e02b), and that a partial revert that only reverts the
problematic case, but still keeps some of the cleanups is probably
better.  

And that partial revert [2] had already been verified by Oleksandr
Natalenko to also fix the issue, I had just missed that in the long
discussion.

So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb:
rework "fix info leak with DMA_FROM_DEVICE""), and effectively only
revert the part that caused problems.

Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1]
Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2]
Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3]
Suggested-by: Halil Pasic 
Tested-by: Oleksandr Natalenko 
Cc: Christoph Hellwig" 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

Revert "swiotlb: fix info leak with DMA_FROM_DEVICE"

2022-05-25T07:17:55+00:00

This reverts commit d4d975e7921079f877f828099bb8260af335508f.

Upstream had a follow-up fix, revert, and a semi-reverted-revert.
Instead of going through this chain which is more painful to backport,
I'm just going to revert this original commit and pick the final one.

Signed-off-by: Sasha Levin

dma-direct: avoid redundant memory sync for swiotlb

2022-04-20T07:23:30+00:00

commit 9e02977bfad006af328add9434c8bffa40e053bb upstream.

When we looked into FIO performance with swiotlb enabled in VM, we found
swiotlb_bounce() is always called one more time than expected for each DMA
read request.

It turns out that the bounce buffer is copied to original DMA buffer twice
after the completion of a DMA request (one is done by in
dma_direct_sync_single_for_cpu(), the other by swiotlb_tbl_unmap_single()).
But the content in bounce buffer actually doesn't change between the two
rounds of copy. So, one round of copy is redundant.

Pass DMA_ATTR_SKIP_CPU_SYNC flag to swiotlb_tbl_unmap_single() to
skip the memory copy in it.

This fix increases FIO 64KB sequential read throughput in a guest with
swiotlb=force by 5.6%.

Fixes: 55897af63091 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code")
Reported-by: Wang Zhaoyang1 
Reported-by: Gao Liang 
Signed-off-by: Chao Gao 
Reviewed-by: Kevin Tian 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Greg Kroah-Hartman

dma-debug: fix return value of __setup handlers

2022-04-08T12:40:25+00:00

[ Upstream commit 80e4390981618e290616dbd06ea190d4576f219d ]

When valid kernel command line parameters
  dma_debug=off dma_debug_entries=100
are used, they are reported as Unknown parameters and added to init's
environment strings, polluting it.

  Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
    dma_debug=off dma_debug_entries=100", will be passed to user space.

and

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc5
     dma_debug=off
     dma_debug_entries=100

Return 1 from these __setup handlers to indicate that the command line
option has been handled.

Fixes: 59d3daafa1726 ("dma-debug: add kernel command line parameters")
Signed-off-by: Randy Dunlap 
Reported-by: Igor Zhbanov 
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Joerg Roedel 
Cc: Christoph Hellwig 
Cc: Marek Szyprowski 
Cc: iommu@lists.linux-foundation.org
Cc: Robin Murphy 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin