linux.git/kernel/fork.c, branch v5.10.258

unshare: fix unshare_fs() handling

2026-04-18T08:30:52+00:00

[ Upstream commit 6c4b2243cb6c0755159bd567130d5e12e7b10d9f ]

There's an unpleasant corner case in unshare(2), when we have a
CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that
case copy_mnt_ns() gets passed current->fs instead of a private copy,
which causes interesting warts in proof of correctness]

> I guess if private means fs->users == 1, the condition could still be true.

Unfortunately, it's worse than just a convoluted proof of correctness.
Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS
(and current->fs->users == 1).

We pass current->fs to copy_mnt_ns(), all right.  Suppose it succeeds and
flips current->fs->{pwd,root} to corresponding locations in the new namespace.
Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM).
We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's
destroyed and its mount tree is dissolved, but...  current->fs->root and
current->fs->pwd are both left pointing to now detached mounts.

They are pinning those, so it's not a UAF, but it leaves the calling
process with unshare(2) failing with -ENOMEM _and_ leaving it with
pwd and root on detached isolated mounts.  The last part is clearly a bug.

There is other fun related to that mess (races with pivot_root(), including
the one between pivot_root() and fork(), of all things), but this one
is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new
fs_struct even if it hadn't been shared in the first place".  Sure, we could
go for something like "if both CLONE_NEWNS *and* one of the things that might
end up failing after copy_mnt_ns() call in create_new_namespaces() are set,
force allocation of new fs_struct", but let's keep it simple - the cost
of copy_fs_struct() is trivial.

Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* gets
a freshly allocated fs_struct, yet to be attached to anything.  That
seriously simplifies the analysis...

FWIW, that bug had been there since the introduction of unshare(2) ;-/

Signed-off-by: Al Viro 
Link: https://patch.msgid.link/20260207082524.GE3183987@ZenIV
Tested-by: Waiman Long 
Signed-off-by: Christian Brauner 
Signed-off-by: Sasha Levin

copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)

2025-10-29T13:01:11+00:00

commit 04ff48239f46e8b493571e260bd0e6c3a6400371 upstream.

With the introduction of clone3 in commit 7f192e3cd316 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit. However, the signature of the copy_*
helper functions (e.g., copy_sighand) used by copy_process was not
adapted.

As such, they truncate the flags on any 32-bit architectures that
supports clone3 (arc, arm, csky, m68k, microblaze, mips32, openrisc,
parisc32, powerpc32, riscv32, x86-32 and xtensa).

For copy_sighand with CLONE_CLEAR_SIGHAND being an actual u64
constant, this triggers an observable bug in kernel selftest
clone3_clear_sighand:

        if (clone_flags & CLONE_CLEAR_SIGHAND)

in function copy_sighand within fork.c will always fail given:

        unsigned long /* == uint32_t */ clone_flags
        #define CLONE_CLEAR_SIGHAND 0x100000000ULL

This commit fixes the bug by always passing clone_flags to copy_sighand
via their declared u64 type, invariant of architecture-dependent integer
sizes.

Fixes: b612e5df4587 ("clone3: add CLONE_CLEAR_SIGHAND")
Cc: stable@vger.kernel.org # linux-5.5+
Signed-off-by: Simon Schuster 
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-1-53fcf5577d57@siemens-energy.com
Acked-by: David Hildenbrand 
Reviewed-by: Lorenzo Stoakes 
Reviewed-by: Arnd Bergmann 
Signed-off-by: Christian Brauner 
Signed-off-by: Greg Kroah-Hartman

mm: drop the assumption that VM_SHARED always implies writable

2025-08-28T14:22:54+00:00

[ Upstream commit e8e17ee90eaf650c855adb0a3e5e965fd6692ff1 ]

Patch series "permit write-sealed memfd read-only shared mappings", v4.

The man page for fcntl() describing memfd file seals states the following
about F_SEAL_WRITE:-

    Furthermore, trying to create new shared, writable memory-mappings via
    mmap(2) will also fail with EPERM.

With emphasis on 'writable'.  In turns out in fact that currently the
kernel simply disallows all new shared memory mappings for a memfd with
F_SEAL_WRITE applied, rendering this documentation inaccurate.

This matters because users are therefore unable to obtain a shared mapping
to a memfd after write sealing altogether, which limits their usefulness.
This was reported in the discussion thread [1] originating from a bug
report [2].

This is a product of both using the struct address_space->i_mmap_writable
atomic counter to determine whether writing may be permitted, and the
kernel adjusting this counter when any VM_SHARED mapping is performed and
more generally implicitly assuming VM_SHARED implies writable.

It seems sensible that we should only update this mapping if VM_MAYWRITE
is specified, i.e.  whether it is possible that this mapping could at any
point be written to.

If we do so then all we need to do to permit write seals to function as
documented is to clear VM_MAYWRITE when mapping read-only.  It turns out
this functionality already exists for F_SEAL_FUTURE_WRITE - we can
therefore simply adapt this logic to do the same for F_SEAL_WRITE.

We then hit a chicken and egg situation in mmap_region() where the check
for VM_MAYWRITE occurs before we are able to clear this flag.  To work
around this, perform this check after we invoke call_mmap(), with careful
consideration of error paths.

Thanks to Andy Lutomirski for the suggestion!

[1]:https://lore.kernel.org/all/20230324133646.16101dfa666f253c4715d965@linux-foundation.org/
[2]:https://bugzilla.kernel.org/show_bug.cgi?id=217238

This patch (of 3):

There is a general assumption that VMAs with the VM_SHARED flag set are
writable.  If the VM_MAYWRITE flag is not set, then this is simply not the
case.

Update those checks which affect the struct address_space->i_mmap_writable
field to explicitly test for this by introducing
[vma_]is_shared_maywrite() helper functions.

This remains entirely conservative, as the lack of VM_MAYWRITE guarantees
that the VMA cannot be written to.

Link: https://lkml.kernel.org/r/cover.1697116581.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/d978aefefa83ec42d18dfa964ad180dbcde34795.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes 
Suggested-by: Andy Lutomirski 
Reviewed-by: Jan Kara 
Cc: Alexander Viro 
Cc: Christian Brauner 
Cc: Hugh Dickins 
Cc: Matthew Wilcox (Oracle) 
Cc: Mike Kravetz 
Cc: Muchun Song 
Signed-off-by: Andrew Morton 
Cc: stable@vger.kernel.org
[isaacmanjarres: resolved merge conflicts due to
due to refactoring that happened in upstream commit
5de195060b2e ("mm: resolve faulty mmap_region() error path behaviour")]
Signed-off-by: Isaac J. Manjarres 
Signed-off-by: Greg Kroah-Hartman

fork: use pidfd_prepare()

2025-06-04T12:37:08+00:00

commit ca7707f5430ad6b1c9cb7cee0a7f67d69328bb2d upstream.

Stop open-coding get_unused_fd_flags() and anon_inode_getfile(). That's
brittle just for keeping the flags between both calls in sync. Use the
dedicated helper.

Message-Id: <20230327-pidfd-file-api-v1-2-5c0e9a3158e4@kernel.org>
Signed-off-by: Christian Brauner 
Signed-off-by: Greg Kroah-Hartman

pid: add pidfd_prepare()

2025-06-04T12:37:08+00:00

commit 6ae930d9dbf2d093157be33428538c91966d8a9f upstream.

Add a new helper that allows to reserve a pidfd and allocates a new
pidfd file that stashes the provided struct pid. This will allow us to
remove places that either open code this function or that call
pidfd_create() but then have to call close_fd() because there are still
failure points after pidfd_create() has been called.

Reviewed-by: Jan Kara 
Message-Id: <20230327-pidfd-file-api-v1-1-5c0e9a3158e4@kernel.org>
Signed-off-by: Christian Brauner 
Signed-off-by: Greg Kroah-Hartman

exec: Simplify unshare_files

2024-06-21T12:52:47+00:00

[ Upstream commit 1f702603e7125a390b5cdf5ce00539781cfcc86a ]

Now that exec no longer needs to return the unshared files to their
previous value there is no reason to return displaced.

Instead when unshare_fd creates a copy of the file table, call
put_files_struct before returning from unshare_files.

Acked-by: Christian Brauner 
v1: https://lkml.kernel.org/r/20200817220425.9389-2-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20201120231441.29911-2-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman 
Signed-off-by: Chuck Lever 
Signed-off-by: Sasha Levin

kernel/fork: beware of __put_task_struct() calling context

2023-09-23T09:01:05+00:00

[ Upstream commit d243b34459cea30cfe5f3a9b2feb44e7daff9938 ]

Under PREEMPT_RT, __put_task_struct() indirectly acquires sleeping
locks. Therefore, it can't be called from an non-preemptible context.

One practical example is splat inside inactive_task_timer(), which is
called in a interrupt context:

  CPU: 1 PID: 2848 Comm: life Kdump: loaded Tainted: G W ---------
   Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/15/2012
   Call Trace:
   dump_stack_lvl+0x57/0x7d
   mark_lock_irq.cold+0x33/0xba
   mark_lock+0x1e7/0x400
   mark_usage+0x11d/0x140
   __lock_acquire+0x30d/0x930
   lock_acquire.part.0+0x9c/0x210
   rt_spin_lock+0x27/0xe0
   refill_obj_stock+0x3d/0x3a0
   kmem_cache_free+0x357/0x560
   inactive_task_timer+0x1ad/0x340
   __run_hrtimer+0x8a/0x1a0
   __hrtimer_run_queues+0x91/0x130
   hrtimer_interrupt+0x10f/0x220
   __sysvec_apic_timer_interrupt+0x7b/0xd0
   sysvec_apic_timer_interrupt+0x4f/0xd0
   asm_sysvec_apic_timer_interrupt+0x12/0x20
   RIP: 0033:0x7fff196bf6f5

Instead of calling __put_task_struct() directly, we defer it using
call_rcu(). A more natural approach would use a workqueue, but since
in PREEMPT_RT, we can't allocate dynamic memory from atomic context,
the code would become more complex because we would need to put the
work_struct instance in the task_struct and initialize it when we
allocate a new task_struct.

The issue is reproducible with stress-ng:

  while true; do
      stress-ng --sched deadline --sched-period 1000000000 \
	      --sched-runtime 800000000 --sched-deadline \
	      1000000000 --mmapfork 23 -t 20
  done

Reported-by: Hu Chunyu 
Suggested-by: Oleg Nesterov 
Suggested-by: Valentin Schneider 
Suggested-by: Peter Zijlstra 
Signed-off-by: Wander Lairson Costa 
Signed-off-by: Peter Zijlstra (Intel) 
Link: https://lore.kernel.org/r/20230614122323.37957-2-wander@redhat.com
Signed-off-by: Sasha Levin

mm: Move mm_cachep initialization to mm_init()

2023-08-08T17:57:39+00:00

commit af80602799681c78f14fbe20b6185a56020dedee upstream.

In order to allow using mm_alloc() much earlier, move initializing
mm_cachep into mm_init().

Signed-off-by: Peter Zijlstra (Intel) 
Link: https://lkml.kernel.org/r/20221025201057.751153381@infradead.org
Signed-off-by: Greg Kroah-Hartman

x86/mm: Use mm_alloc() in poking_init()

2023-08-08T17:57:39+00:00

commit 3f4c8211d982099be693be9aa7d6fc4607dff290 upstream.

Instead of duplicating init_mm, allocate a fresh mm. The advantage is
that mm_alloc() has much simpler dependencies. Additionally it makes
more conceptual sense, init_mm has no (and must not have) user state
to duplicate.

Signed-off-by: Peter Zijlstra (Intel) 
Link: https://lkml.kernel.org/r/20221025201057.816175235@infradead.org
Signed-off-by: Greg Kroah-Hartman

seccomp: Move copy_seccomp() to no failure path.

2023-05-17T09:47:27+00:00

commit a1140cb215fa13dcec06d12ba0c3ee105633b7c4 upstream.

Our syzbot instance reported memory leaks in do_seccomp() [0], similar
to the report [1].  It shows that we miss freeing struct seccomp_filter
and some objects included in it.

We can reproduce the issue with the program below [2] which calls one
seccomp() and two clone() syscalls.

The first clone()d child exits earlier than its parent and sends a
signal to kill it during the second clone(), more precisely before the
fatal_signal_pending() test in copy_process().  When the parent receives
the signal, it has to destroy the embryonic process and return -EINTR to
user space.  In the failure path, we have to call seccomp_filter_release()
to decrement the filter's refcount.

Initially, we called it in free_task() called from the failure path, but
the commit 3a15fb6ed92c ("seccomp: release filter after task is fully
dead") moved it to release_task() to notify user space as early as possible
that the filter is no longer used.

To keep the change and current seccomp refcount semantics, let's move
copy_seccomp() just after the signal check and add a WARN_ON_ONCE() in
free_task() for future debugging.

[0]:
unreferenced object 0xffff8880063add00 (size 256):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.914s)
  hex dump (first 32 bytes):
    01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
    ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
  backtrace:
    do_seccomp (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/seccomp.c:666 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffffc90000035000 (size 4096):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    __vmalloc_node_range (mm/vmalloc.c:3226)
    __vmalloc_node (mm/vmalloc.c:3261 (discriminator 4))
    bpf_prog_alloc_no_stats (kernel/bpf/core.c:91)
    bpf_prog_alloc (kernel/bpf/core.c:129)
    bpf_prog_create_from_user (net/core/filter.c:1414)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff888003fa1000 (size 1024):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    bpf_prog_alloc_no_stats (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/bpf/core.c:95)
    bpf_prog_alloc (kernel/bpf/core.c:129)
    bpf_prog_create_from_user (net/core/filter.c:1414)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff888006360240 (size 16):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 16 bytes):
    01 00 37 00 76 65 72 6c e0 83 01 06 80 88 ff ff  ..7.verl........
  backtrace:
    bpf_prog_store_orig_filter (net/core/filter.c:1137)
    bpf_prog_create_from_user (net/core/filter.c:1428)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff8880060183e0 (size 8):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 8 bytes):
    06 00 00 00 00 00 ff 7f                          ........
  backtrace:
    kmemdup (mm/util.c:129)
    bpf_prog_store_orig_filter (net/core/filter.c:1144)
    bpf_prog_create_from_user (net/core/filter.c:1428)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

[1]: https://syzkaller.appspot.com/bug?id=2809bb0ac77ad9aa3f4afe42d6a610aba594a987

[2]:
#define _GNU_SOURCE
#include 
#include 
#include 
#include 
#include 
#include 

void main(void)
{
	struct sock_filter filter[] = {
		BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_ALLOW),
	};
	struct sock_fprog fprog = {
		.len = sizeof(filter) / sizeof(filter[0]),
		.filter = filter,
	};
	long i, pid;

	syscall(__NR_seccomp, SECCOMP_SET_MODE_FILTER, 0, &fprog);

	for (i = 0; i < 2; i++) {
		pid = syscall(__NR_clone, CLONE_NEWNET | SIGKILL, NULL, NULL, 0);
		if (pid == 0)
			return;
	}
}

Fixes: 3a15fb6ed92c ("seccomp: release filter after task is fully dead")
Reported-by: syzbot+ab17848fe269b573eb71@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta 
Suggested-by: Kees Cook 
Signed-off-by: Kuniyuki Iwashima 
Reviewed-by: Christian Brauner (Microsoft) 
Signed-off-by: Kees Cook 
Link: https://lore.kernel.org/r/20220823154532.82913-1-kuniyu@amazon.com
Signed-off-by: Greg Kroah-Hartman