linux.git/kernel/kprobes.c, branch v4.9.327

kprobes: don't call disarm_kprobe() for disabled kprobes

2022-09-05T08:23:58+00:00

commit 9c80e79906b4ca440d09e7f116609262bb747909 upstream.

The assumption in __disable_kprobe() is wrong, and it could try to disarm
an already disarmed kprobe and fire the WARN_ONCE() below. [0]  We can
easily reproduce this issue.

1. Write 0 to /sys/kernel/debug/kprobes/enabled.

  # echo 0 > /sys/kernel/debug/kprobes/enabled

2. Run execsnoop.  At this time, one kprobe is disabled.

  # /usr/share/bcc/tools/execsnoop &
  [1] 2460
  PCOMM            PID    PPID   RET ARGS

  # cat /sys/kernel/debug/kprobes/list
  ffffffff91345650  r  __x64_sys_execve+0x0    [FTRACE]
  ffffffff91345650  k  __x64_sys_execve+0x0    [DISABLED][FTRACE]

3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes
   kprobes_all_disarmed to false but does not arm the disabled kprobe.

  # echo 1 > /sys/kernel/debug/kprobes/enabled

  # cat /sys/kernel/debug/kprobes/list
  ffffffff91345650  r  __x64_sys_execve+0x0    [FTRACE]
  ffffffff91345650  k  __x64_sys_execve+0x0    [DISABLED][FTRACE]

4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the
   disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace().

  # fg
  /usr/share/bcc/tools/execsnoop
  ^C

Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses
some cleanups and leaves the aggregated kprobe in the hash table.  Then,
__unregister_trace_kprobe() initialises tk->rp.kp.list and creates an
infinite loop like this.

  aggregated kprobe.list -> kprobe.list -.
                                     ^    |
                                     '.__.'

In this situation, these commands fall into the infinite loop and result
in RCU stall or soft lockup.

  cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the
                                       infinite loop with RCU.

  /usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex,
                                   and __get_valid_kprobe() is stuck in
				   the loop.

To avoid the issue, make sure we don't call disarm_kprobe() for disabled
kprobes.

[0]
Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2)
WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129)
Modules linked in: ena
CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ #28
Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017
RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129)
Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94
RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001
RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff
RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff
R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40
R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000
FS:  00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:

 __disable_kprobe (kernel/kprobes.c:1716)
 disable_kprobe (kernel/kprobes.c:2392)
 __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340)
 disable_trace_kprobe (kernel/trace/trace_kprobe.c:429)
 perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168)
 perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295)
 _free_event (kernel/events/core.c:4971)
 perf_event_release_kernel (kernel/events/core.c:5176)
 perf_release (kernel/events/core.c:5186)
 __fput (fs/file_table.c:321)
 task_work_run (./include/linux/sched.h:2056 (discriminator 1) kernel/task_work.c:179 (discriminator 1))
 exit_to_user_mode_prepare (./include/linux/resume_user_mode.h:49 kernel/entry/common.c:169 kernel/entry/common.c:201)
 syscall_exit_to_user_mode (./arch/x86/include/asm/jump_label.h:55 ./arch/x86/include/asm/nospec-branch.h:384 ./arch/x86/include/asm/entry-common.h:94 kernel/entry/common.c:133 kernel/entry/common.c:296)
 do_syscall_64 (arch/x86/entry/common.c:87)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7fe7ff210654
Code: 15 79 89 20 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb be 0f 1f 00 8b 05 9a cd 20 00 48 63 ff 85 c0 75 11 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3a f3 c3 48 83 ec 18 48 89 7c 24 08 e8 34 fc
RSP: 002b:00007ffdbd1d3538 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000008 RCX: 00007fe7ff210654
RDX: 0000000000000000 RSI: 0000000000002401 RDI: 0000000000000008
RBP: 0000000000000000 R08: 94ae31d6fda838a4 R0900007fe8001c9d30
R10: 00007ffdbd1d34b0 R11: 0000000000000246 R12: 00007ffdbd1d3600
R13: 0000000000000000 R14: fffffffffffffffc R15: 00007ffdbd1d3560


Link: https://lkml.kernel.org/r/20220813020509.90805-1-kuniyu@amazon.com
Fixes: 69d54b916d83 ("kprobes: makes kprobes/enabled works correctly for optimized kprobes.")
Signed-off-by: Kuniyuki Iwashima 
Reported-by: Ayushman Dutta 
Cc: "Naveen N. Rao" 
Cc: Anil S Keshavamurthy 
Cc: "David S. Miller" 
Cc: Masami Hiramatsu 
Cc: Wang Nan 
Cc: Kuniyuki Iwashima 
Cc: Kuniyuki Iwashima 
Cc: Ayushman Dutta 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

kprobes: Limit max data_size of the kretprobe instances

2021-12-08T07:45:06+00:00

commit 6bbfa44116689469267f1a6e3d233b52114139d2 upstream.

The 'kprobe::data_size' is unsigned, thus it can not be negative.  But if
user sets it enough big number (e.g. (size_t)-8), the result of 'data_size
+ sizeof(struct kretprobe_instance)' becomes smaller than sizeof(struct
kretprobe_instance) or zero. In result, the kretprobe_instance are
allocated without enough memory, and kretprobe accesses outside of
allocated memory.

To avoid this issue, introduce a max limitation of the
kretprobe::data_size. 4KB per instance should be OK.

Link: https://lkml.kernel.org/r/163836995040.432120.10322772773821182925.stgit@devnote2

Cc: stable@vger.kernel.org
Fixes: f47cd9b553aa ("kprobes: kretprobe user entry-handler")
Reported-by: zhangyue 
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

kretprobe: Avoid re-registration of the same kretprobe earlier

2021-02-10T08:09:25+00:00

commit 0188b87899ffc4a1d36a0badbe77d56c92fd91dc upstream.

Our system encountered a re-init error when re-registering same kretprobe,
where the kretprobe_instance in rp->free_instances is illegally accessed
after re-init.

Implementation to avoid re-registration has been introduced for kprobe
before, but lags for register_kretprobe(). We must check if kprobe has
been re-registered before re-initializing kretprobe, otherwise it will
destroy the data struct of kretprobe registered, which can lead to memory
leak, system crash, also some unexpected behaviors.

We use check_kprobe_rereg() to check if kprobe has been re-registered
before running register_kretprobe()'s body, for giving a warning message
and terminate registration process.

Link: https://lkml.kernel.org/r/20210128124427.2031088-1-bobo.shaobowang@huawei.com

Cc: stable@vger.kernel.org
Fixes: 1f0ab40976460 ("kprobes: Prevent re-registration of the same kprobe")
[ The above commit should have been done for kretprobes too ]
Acked-by: Naveen N. Rao 
Acked-by: Ananth N Mavinakayanahalli 
Acked-by: Masami Hiramatsu 
Signed-off-by: Wang ShaoBo 
Signed-off-by: Cheng Jian 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()

2020-10-01T18:40:18+00:00

commit 3031313eb3d549b7ad6f9fbcc52ba04412e3eb9e upstream.

Commit 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at
kprobe_ftrace_handler") fixed one bug but not completely fixed yet.
If we run a kprobe_module.tc of ftracetest, kernel showed a warning
as below.

# ./ftracetest test.d/kprobe/kprobe_module.tc
=== Ftrace unit tests ===
[1] Kprobe dynamic event - probing module
...
[   22.400215] ------------[ cut here ]------------
[   22.400962] Failed to disarm kprobe-ftrace at trace_printk_irq_work+0x0/0x7e [trace_printk] (-2)
[   22.402139] WARNING: CPU: 7 PID: 200 at kernel/kprobes.c:1091 __disarm_kprobe_ftrace.isra.0+0x7e/0xa0
[   22.403358] Modules linked in: trace_printk(-)
[   22.404028] CPU: 7 PID: 200 Comm: rmmod Not tainted 5.9.0-rc2+ #66
[   22.404870] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
[   22.406139] RIP: 0010:__disarm_kprobe_ftrace.isra.0+0x7e/0xa0
[   22.406947] Code: 30 8b 03 eb c9 80 3d e5 09 1f 01 00 75 dc 49 8b 34 24 89 c2 48 c7 c7 a0 c2 05 82 89 45 e4 c6 05 cc 09 1f 01 01 e8 a9 c7 f0 ff <0f> 0b 8b 45 e4 eb b9 89 c6 48 c7 c7 70 c2 05 82 89 45 e4 e8 91 c7
[   22.409544] RSP: 0018:ffffc90000237df0 EFLAGS: 00010286
[   22.410385] RAX: 0000000000000000 RBX: ffffffff83066024 RCX: 0000000000000000
[   22.411434] RDX: 0000000000000001 RSI: ffffffff810de8d3 RDI: ffffffff810de8d3
[   22.412687] RBP: ffffc90000237e10 R08: 0000000000000001 R09: 0000000000000001
[   22.413762] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88807c478640
[   22.414852] R13: ffffffff8235ebc0 R14: ffffffffa00060c0 R15: 0000000000000000
[   22.415941] FS:  00000000019d48c0(0000) GS:ffff88807d7c0000(0000) knlGS:0000000000000000
[   22.417264] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   22.418176] CR2: 00000000005bb7e3 CR3: 0000000078f7a000 CR4: 00000000000006a0
[   22.419309] Call Trace:
[   22.419990]  kill_kprobe+0x94/0x160
[   22.420652]  kprobes_module_callback+0x64/0x230
[   22.421470]  notifier_call_chain+0x4f/0x70
[   22.422184]  blocking_notifier_call_chain+0x49/0x70
[   22.422979]  __x64_sys_delete_module+0x1ac/0x240
[   22.423733]  do_syscall_64+0x38/0x50
[   22.424366]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   22.425176] RIP: 0033:0x4bb81d
[   22.425741] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e0 ff ff ff f7 d8 64 89 01 48
[   22.428726] RSP: 002b:00007ffc70fef008 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
[   22.430169] RAX: ffffffffffffffda RBX: 00000000019d48a0 RCX: 00000000004bb81d
[   22.431375] RDX: 0000000000000000 RSI: 0000000000000880 RDI: 00007ffc70fef028
[   22.432543] RBP: 0000000000000880 R08: 00000000ffffffff R09: 00007ffc70fef320
[   22.433692] R10: 0000000000656300 R11: 0000000000000246 R12: 00007ffc70fef028
[   22.434635] R13: 0000000000000000 R14: 0000000000000002 R15: 0000000000000000
[   22.435682] irq event stamp: 1169
[   22.436240] hardirqs last  enabled at (1179): [] console_unlock+0x422/0x580
[   22.437466] hardirqs last disabled at (1188): [] console_unlock+0x7b/0x580
[   22.438608] softirqs last  enabled at (866): [] __do_softirq+0x38e/0x490
[   22.439637] softirqs last disabled at (859): [] asm_call_on_stack+0x12/0x20
[   22.440690] ---[ end trace 1e7ce7e1e4567276 ]---
[   22.472832] trace_kprobe: This probe might be able to register after target module is loaded. Continue.

This is because the kill_kprobe() calls disarm_kprobe_ftrace() even
if the given probe is not enabled. In that case, ftrace_set_filter_ip()
fails because the given probe point is not registered to ftrace.

Fix to check the given (going) probe is enabled before invoking
disarm_kprobe_ftrace().

Link: https://lkml.kernel.org/r/159888672694.1411785.5987998076694782591.stgit@devnote2

Fixes: 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler")
Cc: Ingo Molnar 
Cc: "Naveen N . Rao" 
Cc: Anil S Keshavamurthy 
Cc: David Miller 
Cc: Muchun Song 
Cc: Chengming Zhou 
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

kprobes: fix kill kprobe which has been marked as gone

2020-10-01T18:39:59+00:00

[ Upstream commit b0399092ccebd9feef68d4ceb8d6219a8c0caa05 ]

If a kprobe is marked as gone, we should not kill it again.  Otherwise, we
can disarm the kprobe more than once.  In that case, the statistics of
kprobe_ftrace_enabled can unbalance which can lead to that kprobe do not
work.

Fixes: e8386a0cb22f ("kprobes: support probing module __exit function")
Co-developed-by: Chengming Zhou 
Signed-off-by: Muchun Song 
Signed-off-by: Chengming Zhou 
Signed-off-by: Andrew Morton 
Acked-by: Masami Hiramatsu 
Cc: "Naveen N . Rao" 
Cc: Anil S Keshavamurthy 
Cc: David S. Miller 
Cc: Song Liu 
Cc: Steven Rostedt 
Cc: 
Link: https://lkml.kernel.org/r/20200822030055.32383-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler

2020-08-21T09:02:09+00:00

commit 0cb2f1372baa60af8456388a574af6133edd7d80 upstream.

We found a case of kernel panic on our server. The stack trace is as
follows(omit some irrelevant information):

  BUG: kernel NULL pointer dereference, address: 0000000000000080
  RIP: 0010:kprobe_ftrace_handler+0x5e/0xe0
  RSP: 0018:ffffb512c6550998 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff8e9d16eea018 RCX: 0000000000000000
  RDX: ffffffffbe1179c0 RSI: ffffffffc0535564 RDI: ffffffffc0534ec0
  RBP: ffffffffc0534ec1 R08: ffff8e9d1bbb0f00 R09: 0000000000000004
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
  R13: ffff8e9d1f797060 R14: 000000000000bacc R15: ffff8e9ce13eca00
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000080 CR3: 00000008453d0005 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   
   ftrace_ops_assist_func+0x56/0xe0
   ftrace_call+0x5/0x34
   tcpa_statistic_send+0x5/0x130 [ttcp_engine]

The tcpa_statistic_send is the function being kprobed. After analysis,
the root cause is that the fourth parameter regs of kprobe_ftrace_handler
is NULL. Why regs is NULL? We use the crash tool to analyze the kdump.

  crash> dis tcpa_statistic_send -r
         : callq 0xffffffffbd8018c0 

The tcpa_statistic_send calls ftrace_caller instead of ftrace_regs_caller.
So it is reasonable that the fourth parameter regs of kprobe_ftrace_handler
is NULL. In theory, we should call the ftrace_regs_caller instead of the
ftrace_caller. After in-depth analysis, we found a reproducible path.

  Writing a simple kernel module which starts a periodic timer. The
  timer's handler is named 'kprobe_test_timer_handler'. The module
  name is kprobe_test.ko.

  1) insmod kprobe_test.ko
  2) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}'
  3) echo 0 > /proc/sys/kernel/ftrace_enabled
  4) rmmod kprobe_test
  5) stop step 2) kprobe
  6) insmod kprobe_test.ko
  7) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}'

We mark the kprobe as GONE but not disarm the kprobe in the step 4).
The step 5) also do not disarm the kprobe when unregister kprobe. So
we do not remove the ip from the filter. In this case, when the module
loads again in the step 6), we will replace the code to ftrace_caller
via the ftrace_module_enable(). When we register kprobe again, we will
not replace ftrace_caller to ftrace_regs_caller because the ftrace is
disabled in the step 3). So the step 7) will trigger kernel panic. Fix
this problem by disarming the kprobe when the module is going away.

Link: https://lkml.kernel.org/r/20200728064536.24405-1-songmuchun@bytedance.com

Cc: stable@vger.kernel.org
Fixes: ae6aa16fdc16 ("kprobes: introduce ftrace based optimization")
Acked-by: Masami Hiramatsu 
Signed-off-by: Muchun Song 
Co-developed-by: Chengming Zhou 
Signed-off-by: Chengming Zhou 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

kretprobe: Prevent triggering kretprobe from within kprobe_flush_task

2020-06-30T19:38:33+00:00

[ Upstream commit 9b38cc704e844e41d9cf74e647bff1d249512cb3 ]

Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave.
My test was also able to trigger lockdep output:

 ============================================
 WARNING: possible recursive locking detected
 5.6.0-rc6+ #6 Not tainted
 --------------------------------------------
 sched-messaging/2767 is trying to acquire lock:
 ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0

 but task is already holding lock:
 ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&(kretprobe_table_locks[i].lock));
   lock(&(kretprobe_table_locks[i].lock));

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 1 lock held by sched-messaging/2767:
  #0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50

 stack backtrace:
 CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6
 Call Trace:
  dump_stack+0x96/0xe0
  __lock_acquire.cold.57+0x173/0x2b7
  ? native_queued_spin_lock_slowpath+0x42b/0x9e0
  ? lockdep_hardirqs_on+0x590/0x590
  ? __lock_acquire+0xf63/0x4030
  lock_acquire+0x15a/0x3d0
  ? kretprobe_hash_lock+0x52/0xa0
  _raw_spin_lock_irqsave+0x36/0x70
  ? kretprobe_hash_lock+0x52/0xa0
  kretprobe_hash_lock+0x52/0xa0
  trampoline_handler+0xf8/0x940
  ? kprobe_fault_handler+0x380/0x380
  ? find_held_lock+0x3a/0x1c0
  kretprobe_trampoline+0x25/0x50
  ? lock_acquired+0x392/0xbc0
  ? _raw_spin_lock_irqsave+0x50/0x70
  ? __get_valid_kprobe+0x1f0/0x1f0
  ? _raw_spin_unlock_irqrestore+0x3b/0x40
  ? finish_task_switch+0x4b9/0x6d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70

The code within the kretprobe handler checks for probe reentrancy,
so we won't trigger any _raw_spin_lock_irqsave probe in there.

The problem is in outside kprobe_flush_task, where we call:

  kprobe_flush_task
    kretprobe_table_lock
      raw_spin_lock_irqsave
        _raw_spin_lock_irqsave

where _raw_spin_lock_irqsave triggers the kretprobe and installs
kretprobe_trampoline handler on _raw_spin_lock_irqsave return.

The kretprobe_trampoline handler is then executed with already
locked kretprobe_table_locks, and first thing it does is to
lock kretprobe_table_locks ;-) the whole lockup path like:

  kprobe_flush_task
    kretprobe_table_lock
      raw_spin_lock_irqsave
        _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed

        ---> kretprobe_table_locks locked

        kretprobe_trampoline
          trampoline_handler
            kretprobe_hash_lock(current, &head, &flags);  <--- deadlock

Adding kprobe_busy_begin/end helpers that mark code with fake
probe installed to prevent triggering of another kprobe within
this code.

Using these helpers in kprobe_flush_task, so the probe recursion
protection check is hit and the probe is never set to prevent
above lockup.

Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2

Fixes: ef53d9c5e4da ("kprobes: improve kretprobe scalability with hashed locking")
Cc: Ingo Molnar 
Cc: "Gustavo A . R . Silva" 
Cc: Anders Roxell 
Cc: "Naveen N . Rao" 
Cc: Anil S Keshavamurthy 
Cc: David Miller 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: stable@vger.kernel.org
Reported-by: "Ziqian SUN (Zamir)" 
Acked-by: Masami Hiramatsu 
Signed-off-by: Jiri Olsa 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sasha Levin

kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex

2020-06-30T19:38:32+00:00

[ Upstream commit 1a0aa991a6274161c95a844c58cfb801d681eb59 ]

In kprobe_optimizer() kick_kprobe_optimizer() is called
without kprobe_mutex, but this can race with other caller
which is protected by kprobe_mutex.

To fix that, expand kprobe_mutex protected area to protect
kick_kprobe_optimizer() call.

Link: http://lkml.kernel.org/r/158927057586.27680.5036330063955940456.stgit@devnote2

Fixes: cd7ebe2298ff ("kprobes: Use text_poke_smp_batch for optimizing")
Cc: Ingo Molnar 
Cc: "Gustavo A . R . Silva" 
Cc: Anders Roxell 
Cc: "Naveen N . Rao" 
Cc: Anil S Keshavamurthy 
Cc: David Miller 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Ziqian SUN 
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sasha Levin

kprobes: Don't call BUG_ON() if there is a kprobe in use on free list

2019-11-25T08:52:15+00:00

[ Upstream commit cbdd96f5586151e48317d90a403941ec23f12660 ]

Instead of calling BUG_ON(), if we find a kprobe in use on free kprobe
list, just remove it from the list and keep it on kprobe hash list
as same as other in-use kprobes.

Signed-off-by: Masami Hiramatsu 
Cc: Anil S Keshavamurthy 
Cc: David S . Miller 
Cc: Linus Torvalds 
Cc: Naveen N . Rao 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/153666126882.21306.10738207224288507996.stgit@devbox
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin

kprobes: Prohibit probing on BUG() and WARN() address

2019-10-05T10:30:26+00:00

[ Upstream commit e336b4027775cb458dc713745e526fa1a1996b2a ]

Since BUG() and WARN() may use a trap (e.g. UD2 on x86) to
get the address where the BUG() has occurred, kprobes can not
do single-step out-of-line that instruction. So prohibit
probing on such address.

Without this fix, if someone put a kprobe on WARN(), the
kernel will crash with invalid opcode error instead of
outputing warning message, because kernel can not find
correct bug address.

Signed-off-by: Masami Hiramatsu 
Acked-by: Steven Rostedt (VMware) 
Acked-by: Naveen N. Rao 
Cc: Anil S Keshavamurthy 
Cc: David S . Miller 
Cc: Linus Torvalds 
Cc: Naveen N . Rao 
Cc: Peter Zijlstra 
Cc: Steven Rostedt 
Cc: Thomas Gleixner 
Link: https://lkml.kernel.org/r/156750890133.19112.3393666300746167111.stgit@devnote2
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin