linux.git/kernel/pid.c, branch v6.6.132

pid: Add a judgment for ns null in pid_nr_ns

2025-10-19T14:31:01+00:00

[ Upstream commit 006568ab4c5ca2309ceb36fa553e390b4aa9c0c7 ]

__task_pid_nr_ns
        ns = task_active_pid_ns(current);
        pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns);
                if (pid && ns->level <= pid->level) {

Sometimes null is returned for task_active_pid_ns. Then it will trigger kernel panic in pid_nr_ns.

For example:
	Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
	Mem abort info:
	ESR = 0x0000000096000007
	EC = 0x25: DABT (current EL), IL = 32 bits
	SET = 0, FnV = 0
	EA = 0, S1PTW = 0
	FSC = 0x07: level 3 translation fault
	Data abort info:
	ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
	CM = 0, WnR = 0, TnD = 0, TagAccess = 0
	GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
	user pgtable: 4k pages, 39-bit VAs, pgdp=00000002175aa000
	[0000000000000058] pgd=08000002175ab003, p4d=08000002175ab003, pud=08000002175ab003, pmd=08000002175be003, pte=0000000000000000
	pstate: 834000c5 (Nzcv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
	pc : __task_pid_nr_ns+0x74/0xd0
	lr : __task_pid_nr_ns+0x24/0xd0
	sp : ffffffc08001bd10
	x29: ffffffc08001bd10 x28: ffffffd4422b2000 x27: 0000000000000001
	x26: ffffffd442821168 x25: ffffffd442821000 x24: 00000f89492eab31
	x23: 00000000000000c0 x22: ffffff806f5693c0 x21: ffffff806f5693c0
	x20: 0000000000000001 x19: 0000000000000000 x18: 0000000000000000
	x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 00000000023a1adc
	x14: 0000000000000003 x13: 00000000007ef6d8 x12: 001167c391c78800
	x11: 00ffffffffffffff x10: 0000000000000000 x9 : 0000000000000001
	x8 : ffffff80816fa3c0 x7 : 0000000000000000 x6 : 49534d702d535449
	x5 : ffffffc080c4c2c0 x4 : ffffffd43ee128c8 x3 : ffffffd43ee124dc
	x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffffff806f5693c0
	Call trace:
	__task_pid_nr_ns+0x74/0xd0
	...
	__handle_irq_event_percpu+0xd4/0x284
	handle_irq_event+0x48/0xb0
	handle_fasteoi_irq+0x160/0x2d8
	generic_handle_domain_irq+0x44/0x60
	gic_handle_irq+0x4c/0x114
	call_on_irq_stack+0x3c/0x74
	do_interrupt_handler+0x4c/0x84
	el1_interrupt+0x34/0x58
	el1h_64_irq_handler+0x18/0x24
	el1h_64_irq+0x68/0x6c
	account_kernel_stack+0x60/0x144
	exit_task_stack_account+0x1c/0x80
	do_exit+0x7e4/0xaf8
	...
	get_signal+0x7bc/0x8d8
	do_notify_resume+0x128/0x828
	el0_svc+0x6c/0x70
	el0t_64_sync_handler+0x68/0xbc
	el0t_64_sync+0x1a8/0x1ac
	Code: 35fffe54 911a02a8 f9400108 b4000128 (b9405a69)
	---[ end trace 0000000000000000 ]---
	Kernel panic - not syncing: Oops: Fatal exception in interrupt

Signed-off-by: gaoxiang17 
Link: https://lore.kernel.org/20250802022123.3536934-1-gxxa03070307@gmail.com
Reviewed-by: Baoquan He 
Signed-off-by: Christian Brauner 
Signed-off-by: Sasha Levin

pidfd: prevent a kernel-doc warning

2023-09-19T20:21:33+00:00

Change the comment to match the function name that the SYSCALL_DEFINE()
macros generate to prevent a kernel-doc warning.

kernel/pid.c:628: warning: expecting prototype for pidfd_open(). Prototype was for sys_pidfd_open() instead

Link: https://lkml.kernel.org/r/20230912060822.2500-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap 
Cc: Christian Brauner 
Signed-off-by: Andrew Morton

memfd: replace ratcheting feature from vm.memfd_noexec with hierarchy

2023-08-21T20:37:59+00:00

This sysctl has the very unusual behaviour of not allowing any user (even
CAP_SYS_ADMIN) to reduce the restriction setting, meaning that if you were
to set this sysctl to a more restrictive option in the host pidns you
would need to reboot your machine in order to reset it.

The justification given in [1] is that this is a security feature and thus
it should not be possible to disable.  Aside from the fact that we have
plenty of security-related sysctls that can be disabled after being
enabled (fs.protected_symlinks for instance), the protection provided by
the sysctl is to stop users from being able to create a binary and then
execute it.  A user with CAP_SYS_ADMIN can trivially do this without
memfd_create(2):

  % cat mount-memfd.c
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 

  #define SHELLCODE "#!/bin/echo this file was executed from this totally private tmpfs:"

  int main(void)
  {
  	int fsfd = fsopen("tmpfs", FSOPEN_CLOEXEC);
  	assert(fsfd >= 0);
  	assert(!fsconfig(fsfd, FSCONFIG_CMD_CREATE, NULL, NULL, 2));

  	int dfd = fsmount(fsfd, FSMOUNT_CLOEXEC, 0);
  	assert(dfd >= 0);

  	int execfd = openat(dfd, "exe", O_CREAT | O_RDWR | O_CLOEXEC, 0782);
  	assert(execfd >= 0);
  	assert(write(execfd, SHELLCODE, strlen(SHELLCODE)) == strlen(SHELLCODE));
  	assert(!close(execfd));

  	char *execpath = NULL;
  	char *argv[] = { "bad-exe", NULL }, *envp[] = { NULL };
  	execfd = openat(dfd, "exe", O_PATH | O_CLOEXEC);
  	assert(execfd >= 0);
  	assert(asprintf(&execpath, "/proc/self/fd/%d", execfd) > 0);
  	assert(!execve(execpath, argv, envp));
  }
  % ./mount-memfd
  this file was executed from this totally private tmpfs: /proc/self/fd/5
  %

Given that it is possible for CAP_SYS_ADMIN users to create executable
binaries without memfd_create(2) and without touching the host filesystem
(not to mention the many other things a CAP_SYS_ADMIN process would be
able to do that would be equivalent or worse), it seems strange to cause a
fair amount of headache to admins when there doesn't appear to be an
actual security benefit to blocking this.  There appear to be concerns
about confused-deputy-esque attacks[2] but a confused deputy that can
write to arbitrary sysctls is a bigger security issue than executable
memfds.

/* New API */

The primary requirement from the original author appears to be more based
on the need to be able to restrict an entire system in a hierarchical
manner[3], such that child namespaces cannot re-enable executable memfds.

So, implement that behaviour explicitly -- the vm.memfd_noexec scope is
evaluated up the pidns tree to &init_pid_ns and you have the most
restrictive value applied to you.  The new lower limit you can set
vm.memfd_noexec is whatever limit applies to your parent.

Note that a pidns will inherit a copy of the parent pidns's effective
vm.memfd_noexec setting at unshare() time.  This matches the existing
behaviour, and it also ensures that a pidns will never have its
vm.memfd_noexec setting *lowered* behind its back (but it will be raised
if the parent raises theirs).

/* Backwards Compatibility */

As the previous version of the sysctl didn't allow you to lower the
setting at all, there are no backwards compatibility issues with this
aspect of the change.

However it should be noted that now that the setting is completely
hierarchical.  Previously, a cloned pidns would just copy the current
pidns setting, meaning that if the parent's vm.memfd_noexec was changed it
wouldn't propoagate to existing pid namespaces.  Now, the restriction
applies recursively.  This is a uAPI change, however:

 * The sysctl is very new, having been merged in 6.3.
 * Several aspects of the sysctl were broken up until this patchset and
   the other patchset by Jeff Xu last month.

And thus it seems incredibly unlikely that any real users would run into
this issue. In the worst case, if this causes userspace isues we could
make it so that modifying the setting follows the hierarchical rules but
the restriction checking uses the cached copy.

[1]: https://lore.kernel.org/CABi2SkWnAgHK1i6iqSqPMYuNEhtHBkO8jUuCvmG3RmUB5TKHJw@mail.gmail.com/
[2]: https://lore.kernel.org/CALmYWFs_dNCzw_pW1yRAo4bGCPEtykroEQaowNULp7svwMLjOg@mail.gmail.com/
[3]: https://lore.kernel.org/CALmYWFuahdUF7cT4cm7_TGLqPanuHXJ-hVSfZt7vpTnc18DPrw@mail.gmail.com/

Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-4-7ff9e3e10ba6@cyphar.com
Fixes: 105ff5339f49 ("mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC")
Signed-off-by: Aleksa Sarai 
Cc: Dominique Martinet 
Cc: Christian Brauner 
Cc: Daniel Verkamp 
Cc: Jeff Xu 
Cc: Kees Cook 
Cc: Shuah Khan 
Cc: 
Signed-off-by: Andrew Morton

pid: use struct_size_t() helper

2023-07-01T15:26:23+00:00

Before commit d67790ddf021 ("overflow: Add struct_size_t() helper") only
struct_size() existed, which expects a valid pointer instance containing
the flexible array.

However, when we determine the default struct pid allocation size for
the associated kmem cache of a pid namespace we need to take the nesting
depth of the pid namespace into account without an variable instance
necessarily being available.

In commit b69f0aeb0689 ("pid: Replace struct pid 1-element array with
flex-array") we used to handle this the old fashioned way and cast NULL
to a struct pid pointer type. However, we do apparently have a dedicated
struct_size_t() helper for exactly this case. So switch to that.

Suggested-by: Kees Cook 
Suggested-by: Linus Torvalds 
Signed-off-by: Christian Brauner 
Signed-off-by: Linus Torvalds

pid: Replace struct pid 1-element array with flex-array

2023-06-30T16:04:01+00:00

For pid namespaces, struct pid uses a dynamically sized array member,
"numbers".  This was implemented using the ancient 1-element fake
flexible array, which has been deprecated for decades.

Replace it with a C99 flexible array, refactor the array size
calculations to use struct_size(), and address elements via indexes.
Note that the static initializer (which defines a single element) works
as-is, and requires no special handling.

Without this, CONFIG_UBSAN_BOUNDS (and potentially
CONFIG_FORTIFY_SOURCE) will trigger bounds checks:

  https://lore.kernel.org/lkml/20230517-bushaltestelle-super-e223978c1ba6@brauner

Cc: Christian Brauner 
Cc: Jan Kara 
Cc: Jeff Xu 
Cc: Andreas Gruenbacher 
Cc: Daniel Verkamp 
Cc: "Paul E. McKenney" 
Cc: Jeff Xu 
Cc: Andrew Morton 
Cc: Boqun Feng 
Cc: Luis Chamberlain 
Cc: Frederic Weisbecker 
Reported-by: syzbot+ac3b41786a2d0565b6d5@syzkaller.appspotmail.com
[brauner: dropped unrelated changes and remove 0 with NULL cast]
Signed-off-by: Kees Cook 
Signed-off-by: Christian Brauner 
Signed-off-by: Linus Torvalds

pid: add pidfd_prepare()

2023-04-03T09:16:56+00:00

Add a new helper that allows to reserve a pidfd and allocates a new
pidfd file that stashes the provided struct pid. This will allow us to
remove places that either open code this function or that call
pidfd_create() but then have to call close_fd() because there are still
failure points after pidfd_create() has been called.

Reviewed-by: Jan Kara 
Message-Id: <20230327-pidfd-file-api-v1-1-5c0e9a3158e4@kernel.org>
Signed-off-by: Christian Brauner

gfs2: Add glockfd debugfs file

2022-06-29T11:07:16+00:00

When a process has a gfs2 file open, the file is keeping a reference on the
underlying gfs2 inode, and the inode is keeping the inode's iopen glock held in
shared mode.  In other words, the process depends on the iopen glock of each
open gfs2 file.  Expose those dependencies in a new "glockfd" debugfs file.

The new debugfs file contains one line for each gfs2 file descriptor,
specifying the tgid, file descriptor number, and glock name, e.g.,

  1601 6 5/816d

This list is compiled by iterating all tasks on the system using find_ge_pid(),
and all file descriptors of each task using task_lookup_next_fd_rcu().  To make
that work from gfs2, export those two functions.

Signed-off-by: Andreas Gruenbacher

pid: add pidfd_get_task() helper

2021-10-14T11:29:18+00:00

The number of system calls making use of pidfds is constantly
increasing. Some of those new system calls duplicate the code to turn a
pidfd into task_struct it refers to. Give them a simple helper for this.

Link: https://lore.kernel.org/r/20211004125050.1153693-2-christian.brauner@ubuntu.com
Link: https://lore.kernel.org/r/20211011133245.1703103-2-brauner@kernel.org
Cc: Vlastimil Babka 
Cc: Suren Baghdasaryan 
Cc: Matthew Bobrowski 
Cc: Alexander Duyck 
Cc: David Hildenbrand 
Cc: Jan Kara 
Cc: Minchan Kim 
Reviewed-by: Matthew Bobrowski 
Acked-by: David Hildenbrand 
Signed-off-by: Christian Brauner

kernel/pid.c: implement additional checks upon pidfd_create() parameters

2021-08-10T10:53:07+00:00

By adding the pidfd_create() declaration to linux/pid.h, we
effectively expose this function to the rest of the kernel. In order
to avoid any unintended behavior, or set false expectations upon this
function, ensure that constraints are forced upon each of the passed
parameters. This includes the checking of whether the passed struct
pid is a thread-group leader as pidfd creation is currently limited to
such pid types.

Link: https://lore.kernel.org/r/2e9b91c2d529d52a003b8b86c45f866153be9eb5.1628398044.git.repnop@google.com
Signed-off-by: Matthew Bobrowski 
Acked-by: Christian Brauner 
Signed-off-by: Jan Kara

kernel/pid.c: remove static qualifier from pidfd_create()

2021-08-10T10:53:04+00:00

With the idea of returning pidfds from the fanotify API, we need to
expose a mechanism for creating pidfds. We drop the static qualifier
from pidfd_create() and add its declaration to linux/pid.h so that the
pidfd_create() helper can be called from other kernel subsystems
i.e. fanotify.

Link: https://lore.kernel.org/r/0c68653ec32f1b7143301f0231f7ed14062fd82b.1628398044.git.repnop@google.com
Signed-off-by: Matthew Bobrowski 
Acked-by: Christian Brauner 
Signed-off-by: Jan Kara