linux.git/kernel/power, branch v6.1.168 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git PM: sleep: console: Fix the black screen issue 2025-08-28T14:25:53+00:00 tuhaowen tuhaowen@uniontech.com 2025-06-11T03:23:45+00:00 a5ba5059f265d53bb9f5066097543246234cdd9a [ Upstream commit 4266e8fa56d3d982bf451d382a410b9db432015c ] When the computer enters sleep status without a monitor connected, the system switches the console to the virtual terminal tty63(SUSPEND_CONSOLE). If a monitor is subsequently connected before waking up, the system skips the required VT restoration process during wake-up, leaving the console on tty63 instead of switching back to tty1. To fix this issue, a global flag vt_switch_done is introduced to record whether the system has successfully switched to the suspend console via vt_move_to_console() during suspend. If the switch was completed, vt_switch_done is set to 1. Later during resume, this flag is checked to ensure that the original console is restored properly by calling vt_move_to_console(orig_fgconsole, 0). This prevents scenarios where the resume logic skips console restoration due to incorrect detection of the console state, especially when a monitor is reconnected before waking up. Signed-off-by: tuhaowen <tuhaowen@uniontech.com> Link: https://patch.msgid.link/20250611032345.29962-1-tuhaowen@uniontech.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4266e8fa56d3d982bf451d382a410b9db432015c ]

When the computer enters sleep status without a monitor
connected, the system switches the console to the virtual
terminal tty63(SUSPEND_CONSOLE).

If a monitor is subsequently connected before waking up,
the system skips the required VT restoration process
during wake-up, leaving the console on tty63 instead of
switching back to tty1.

To fix this issue, a global flag vt_switch_done is introduced
to record whether the system has successfully switched to
the suspend console via vt_move_to_console() during suspend.

If the switch was completed, vt_switch_done is set to 1.
Later during resume, this flag is checked to ensure that
the original console is restored properly by calling
vt_move_to_console(orig_fgconsole, 0).

This prevents scenarios where the resume logic skips console
restoration due to incorrect detection of the console state,
especially when a monitor is reconnected before waking up.

Signed-off-by: tuhaowen <tuhaowen@uniontech.com>
Link: https://patch.msgid.link/20250611032345.29962-1-tuhaowen@uniontech.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks() 2025-06-27T10:07:07+00:00 Zijun Hu quic_zijuhu@quicinc.com 2025-05-05T09:26:51+00:00 5274cd1cd936ba2bfd4782f6546e6c9d2515a031 [ Upstream commit f0050a3e214aa941b78ad4caf122a735a24d81a6 ] pm_show_wakelocks() is called to generate a string when showing attributes /sys/power/wake_(lock|unlock), but the string ends with an unwanted space that was added back by mistake by commit c9d967b2ce40 ("PM: wakeup: simplify the output logic of pm_show_wakelocks()"). Remove the unwanted space. Fixes: c9d967b2ce40 ("PM: wakeup: simplify the output logic of pm_show_wakelocks()") Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://patch.msgid.link/20250505-fix_power-v1-1-0f7f2c2f338c@quicinc.com [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f0050a3e214aa941b78ad4caf122a735a24d81a6 ]

pm_show_wakelocks() is called to generate a string when showing
attributes /sys/power/wake_(lock|unlock), but the string ends
with an unwanted space that was added back by mistake by commit
c9d967b2ce40 ("PM: wakeup: simplify the output logic of
pm_show_wakelocks()").

Remove the unwanted space.

Fixes: c9d967b2ce40 ("PM: wakeup: simplify the output logic of pm_show_wakelocks()")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20250505-fix_power-v1-1-0f7f2c2f338c@quicinc.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PM: hibernate: Add error handling for syscore_suspend() 2025-02-21T12:49:22+00:00 Wentao Liang vulab@iscas.ac.cn 2025-01-19T14:32:05+00:00 e7fe27d6a242ee30165a3bfc511f64644e72fb16 [ Upstream commit e20a70c572539a486dbd91b225fa6a194a5e2122 ] In hibernation_platform_enter(), the code did not check the return value of syscore_suspend(), potentially leading to a situation where syscore_resume() would be called even if syscore_suspend() failed. This could cause unpredictable behavior or system instability. Modify the code sequence in question to properly handle errors returned by syscore_suspend(). If an error occurs in the suspend path, the code now jumps to label 'Enable_irqs' skipping the syscore_resume() call and only enabling interrupts after setting the system state to SYSTEM_RUNNING. Fixes: 40dc166cb5dd ("PM / Core: Introduce struct syscore_ops for core subsystems PM") Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20250119143205.2103-1-vulab@iscas.ac.cn [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e20a70c572539a486dbd91b225fa6a194a5e2122 ]

In hibernation_platform_enter(), the code did not check the
return value of syscore_suspend(), potentially leading to a
situation where syscore_resume() would be called even if
syscore_suspend() failed. This could cause unpredictable
behavior or system instability.

Modify the code sequence in question to properly handle errors returned
by syscore_suspend(). If an error occurs in the suspend path, the code
now jumps to label 'Enable_irqs' skipping the syscore_resume() call and
only enabling interrupts after setting the system state to SYSTEM_RUNNING.

Fixes: 40dc166cb5dd ("PM / Core: Introduce struct syscore_ops for core subsystems PM")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250119143205.2103-1-vulab@iscas.ac.cn
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PM: s2idle: Make sure CPUs will wakeup directly on resume 2024-04-17T09:18:22+00:00 Anna-Maria Behnsen anna-maria@linutronix.de 2024-04-08T07:02:23+00:00 bccc8d15509273c49cfb2541003febe1469fa680 commit 3c89a068bfd0698a5478f4cf39493595ef757d5e upstream. s2idle works like a regular suspend with freezing processes and freezing devices. All CPUs except the control CPU go into idle. Once this is completed the control CPU kicks all other CPUs out of idle, so that they reenter the idle loop and then enter s2idle state. The control CPU then issues an swait() on the suspend state and therefore enters the idle loop as well. Due to being kicked out of idle, the other CPUs leave their NOHZ states, which means the tick is active and the corresponding hrtimer is programmed to the next jiffie. On entering s2idle the CPUs shut down their local clockevent device to prevent wakeups. The last CPU which enters s2idle shuts down its local clockevent and freezes timekeeping. On resume, one of the CPUs receives the wakeup interrupt, unfreezes timekeeping and its local clockevent and starts the resume process. At that point all other CPUs are still in s2idle with their clockevents switched off. They only resume when they are kicked by another CPU or after resuming devices and then receiving a device interrupt. That means there is no guarantee that all CPUs will wakeup directly on resume. As a consequence there is no guarantee that timers which are queued on those CPUs and should expire directly after resume, are handled. Also timer list timers which are remotely queued to one of those CPUs after resume will not result in a reprogramming IPI as the tick is active. Queueing a hrtimer will also not result in a reprogramming IPI because the first hrtimer event is already in the past. The recent introduction of the timer pull model (7ee988770326 ("timers: Implement the hierarchical pull model")) amplifies this problem, if the current migrator is one of the non woken up CPUs. When a non pinned timer list timer is queued and the queuing CPU goes idle, it relies on the still suspended migrator CPU to expire the timer which will happen by chance. The problem exists since commit 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path"). There the cpuidle_pause() call which in turn invoked a wakeup for all idle CPUs was moved to a later point in the resume process. This might not be reached or reached very late because it waits on a timer of a still suspended CPU. Address this by kicking all CPUs out of idle after the control CPU returns from swait() so that they resume their timers and restore consistent system state. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218641 Fixes: 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path") Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Cc: 5.16+ <stable@kernel.org> # 5.16+ Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3c89a068bfd0698a5478f4cf39493595ef757d5e upstream.

s2idle works like a regular suspend with freezing processes and freezing
devices. All CPUs except the control CPU go into idle. Once this is
completed the control CPU kicks all other CPUs out of idle, so that they
reenter the idle loop and then enter s2idle state. The control CPU then
issues an swait() on the suspend state and therefore enters the idle loop
as well.

Due to being kicked out of idle, the other CPUs leave their NOHZ states,
which means the tick is active and the corresponding hrtimer is programmed
to the next jiffie.

On entering s2idle the CPUs shut down their local clockevent device to
prevent wakeups. The last CPU which enters s2idle shuts down its local
clockevent and freezes timekeeping.

On resume, one of the CPUs receives the wakeup interrupt, unfreezes
timekeeping and its local clockevent and starts the resume process. At that
point all other CPUs are still in s2idle with their clockevents switched
off. They only resume when they are kicked by another CPU or after resuming
devices and then receiving a device interrupt.

That means there is no guarantee that all CPUs will wakeup directly on
resume. As a consequence there is no guarantee that timers which are queued
on those CPUs and should expire directly after resume, are handled. Also
timer list timers which are remotely queued to one of those CPUs after
resume will not result in a reprogramming IPI as the tick is
active. Queueing a hrtimer will also not result in a reprogramming IPI
because the first hrtimer event is already in the past.

The recent introduction of the timer pull model (7ee988770326 ("timers:
Implement the hierarchical pull model")) amplifies this problem, if the
current migrator is one of the non woken up CPUs. When a non pinned timer
list timer is queued and the queuing CPU goes idle, it relies on the still
suspended migrator CPU to expire the timer which will happen by chance.

The problem exists since commit 8d89835b0467 ("PM: suspend: Do not pause
cpuidle in the suspend-to-idle path"). There the cpuidle_pause() call which
in turn invoked a wakeup for all idle CPUs was moved to a later point in
the resume process. This might not be reached or reached very late because
it waits on a timer of a still suspended CPU.

Address this by kicking all CPUs out of idle after the control CPU returns
from swait() so that they resume their timers and restore consistent system
state.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218641
Fixes: 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: 5.16+ <stable@kernel.org> # 5.16+
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM: suspend: Set mem_sleep_current during kernel command line setup 2024-04-03T13:19:28+00:00 Maulik Shah quic_mkshah@quicinc.com 2024-02-29T06:44:59+00:00 a7b6523f92001a538b74edf85f1384cab4fada5a [ Upstream commit 9bc4ffd32ef8943f5c5a42c9637cfd04771d021b ] psci_init_system_suspend() invokes suspend_set_ops() very early during bootup even before kernel command line for mem_sleep_default is setup. This leads to kernel command line mem_sleep_default=s2idle not working as mem_sleep_current gets changed to deep via suspend_set_ops() and never changes back to s2idle. Set mem_sleep_current along with mem_sleep_default during kernel command line setup as default suspend mode. Fixes: faf7ec4a92c0 ("drivers: firmware: psci: add system suspend support") CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9bc4ffd32ef8943f5c5a42c9637cfd04771d021b ]

psci_init_system_suspend() invokes suspend_set_ops() very early during
bootup even before kernel command line for mem_sleep_default is setup.
This leads to kernel command line mem_sleep_default=s2idle not working
as mem_sleep_current gets changed to deep via suspend_set_ops() and never
changes back to s2idle.

Set mem_sleep_current along with mem_sleep_default during kernel command
line setup as default suspend mode.

Fixes: faf7ec4a92c0 ("drivers: firmware: psci: add system suspend support")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PM: hibernate: Enforce ordering during image compression/decompression 2024-02-01T00:16:58+00:00 Hongchen Zhang zhanghongchen@loongson.cn 2023-11-16T00:56:09+00:00 3a081586c75398ba9813fb5c69ba55f9145fd6bb commit 71cd7e80cfde548959952eac7063aeaea1f2e1c6 upstream. An S4 (suspend to disk) test on the LoongArch 3A6000 platform sometimes fails with the following error messaged in the dmesg log: Invalid LZO compressed length That happens because when compressing/decompressing the image, the synchronization between the control thread and the compress/decompress/crc thread is based on a relaxed ordering interface, which is unreliable, and the following situation may occur: CPU 0 CPU 1 save_image_lzo lzo_compress_threadfn atomic_set(&d->stop, 1); atomic_read(&data[thr].stop) data[thr].cmp = data[thr].cmp_len; WRITE data[thr].cmp_len Then CPU0 gets a stale cmp_len and writes it to disk. During resume from S4, wrong cmp_len is loaded. To maintain data consistency between the two threads, use the acquire/release variants of atomic set and read operations. Fixes: 081a9d043c98 ("PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image") Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> Co-developed-by: Weihao Li <liweihao@loongson.cn> Signed-off-by: Weihao Li <liweihao@loongson.cn> [ rjw: Subject rewrite and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 71cd7e80cfde548959952eac7063aeaea1f2e1c6 upstream.

An S4 (suspend to disk) test on the LoongArch 3A6000 platform sometimes
fails with the following error messaged in the dmesg log:

	Invalid LZO compressed length

That happens because when compressing/decompressing the image, the
synchronization between the control thread and the compress/decompress/crc
thread is based on a relaxed ordering interface, which is unreliable, and the
following situation may occur:

CPU 0					CPU 1
save_image_lzo				lzo_compress_threadfn
					  atomic_set(&d->stop, 1);
  atomic_read(&data[thr].stop)
  data[thr].cmp = data[thr].cmp_len;
	  				  WRITE data[thr].cmp_len

Then CPU0 gets a stale cmp_len and writes it to disk. During resume from S4,
wrong cmp_len is loaded.

To maintain data consistency between the two threads, use the acquire/release
variants of atomic set and read operations.

Fixes: 081a9d043c98 ("PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Co-developed-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: Weihao Li <liweihao@loongson.cn>
[ rjw: Subject rewrite and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM: hibernate: Clean up sync_read handling in snapshot_write_next() 2023-11-28T17:07:11+00:00 Brian Geffon bgeffon@google.com 2023-09-22T16:07:04+00:00 d15029481813b68db77b9a328fe2bed1b3267724 commit d08970df1980476f27936e24d452550f3e9e92e1 upstream. In snapshot_write_next(), sync_read is set and unset in three different spots unnecessiarly. As a result there is a subtle bug where the first page after the meta data has been loaded unconditionally sets sync_read to 0. If this first PFN was actually a highmem page, then the returned buffer will be the global "buffer," and the page needs to be loaded synchronously. That is, I'm not sure we can always assume the following to be safe: handle->buffer = get_buffer(&orig_bm, &ca); handle->sync_read = 0; Because get_buffer() can call get_highmem_page_buffer() which can return 'buffer'. The easiest way to address this is just set sync_read before snapshot_write_next() returns if handle->buffer == buffer. Signed-off-by: Brian Geffon <bgeffon@google.com> Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem") Cc: All applicable <stable@vger.kernel.org> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d08970df1980476f27936e24d452550f3e9e92e1 upstream.

In snapshot_write_next(), sync_read is set and unset in three different
spots unnecessiarly. As a result there is a subtle bug where the first
page after the meta data has been loaded unconditionally sets sync_read
to 0. If this first PFN was actually a highmem page, then the returned
buffer will be the global "buffer," and the page needs to be loaded
synchronously.

That is, I'm not sure we can always assume the following to be safe:

	handle->buffer = get_buffer(&orig_bm, &ca);
	handle->sync_read = 0;

Because get_buffer() can call get_highmem_page_buffer() which can
return 'buffer'.

The easiest way to address this is just set sync_read before
snapshot_write_next() returns if handle->buffer == buffer.

Signed-off-by: Brian Geffon <bgeffon@google.com>
Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem")
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM: hibernate: Use __get_safe_page() rather than touching the list 2023-11-28T17:07:11+00:00 Brian Geffon bgeffon@google.com 2023-09-21T17:00:45+00:00 567c6f64950ecbb9cde6f90bc5b785fb502f7e74 commit f0c7183008b41e92fa676406d87f18773724b48b upstream. We found at least one situation where the safe pages list was empty and get_buffer() would gladly try to use a NULL pointer. Signed-off-by: Brian Geffon <bgeffon@google.com> Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem") Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f0c7183008b41e92fa676406d87f18773724b48b upstream.

We found at least one situation where the safe pages list was empty and
get_buffer() would gladly try to use a NULL pointer.

Signed-off-by: Brian Geffon <bgeffon@google.com>
Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM: QoS: Restore support for default value on frequency QoS 2023-07-23T11:49:45+00:00 Chungkai Yang Chung-kai.Yang@mediatek.com 2023-07-05T08:59:07+00:00 9a2c57fd328486b6f36ba99435a1ec4907617a32 commit 3a8395b565b5b4f019b3dc182be4c4541eb35ac8 upstream. Commit 8d36694245f2 ("PM: QoS: Add check to make sure CPU freq is non-negative") makes sure CPU freq is non-negative to avoid negative value converting to unsigned data type. However, when the value is PM_QOS_DEFAULT_VALUE, pm_qos_update_target specifically uses c->default_value which is set to FREQ_QOS_MIN/MAX_DEFAULT_VALUE when cpufreq_policy_alloc is executed, for this case handling. Adding check for PM_QOS_DEFAULT_VALUE to let default setting work will fix this problem. Fixes: 8d36694245f2 ("PM: QoS: Add check to make sure CPU freq is non-negative") Link: https://lore.kernel.org/lkml/20230626035144.19717-1-Chung-kai.Yang@mediatek.com/ Link: https://lore.kernel.org/lkml/20230627071727.16646-1-Chung-kai.Yang@mediatek.com/ Link: https://lore.kernel.org/lkml/CAJZ5v0gxNOWhC58PHeUhW_tgf6d1fGJVZ1x91zkDdht11yUv-A@mail.gmail.com/ Signed-off-by: Chungkai Yang <Chung-kai.Yang@mediatek.com> Cc: 6.0+ <stable@vger.kernel.org> # 6.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3a8395b565b5b4f019b3dc182be4c4541eb35ac8 upstream.

Commit 8d36694245f2 ("PM: QoS: Add check to make sure CPU freq is
non-negative") makes sure CPU freq is non-negative to avoid negative
value converting to unsigned data type. However, when the value is
PM_QOS_DEFAULT_VALUE, pm_qos_update_target specifically uses
c->default_value which is set to FREQ_QOS_MIN/MAX_DEFAULT_VALUE when
cpufreq_policy_alloc is executed, for this case handling.

Adding check for PM_QOS_DEFAULT_VALUE to let default setting work will
fix this problem.

Fixes: 8d36694245f2 ("PM: QoS: Add check to make sure CPU freq is non-negative")
Link: https://lore.kernel.org/lkml/20230626035144.19717-1-Chung-kai.Yang@mediatek.com/
Link: https://lore.kernel.org/lkml/20230627071727.16646-1-Chung-kai.Yang@mediatek.com/
Link: https://lore.kernel.org/lkml/CAJZ5v0gxNOWhC58PHeUhW_tgf6d1fGJVZ1x91zkDdht11yUv-A@mail.gmail.com/
Signed-off-by: Chungkai Yang <Chung-kai.Yang@mediatek.com>
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM: hibernate: Do not get block device exclusively in test_resume mode 2023-05-11T14:03:38+00:00 Chen Yu yu.c.chen@intel.com 2023-04-14T12:10:42+00:00 72f3217aa1d3b533ad1f0dfa5e9b7b0ec841d44a [ Upstream commit 5904de0d735bbb3b4afe9375c5b4f9748f882945 ] The system refused to do a test_resume because it found that the swap device has already been taken by someone else. Specifically, the swsusp_check()->blkdev_get_by_dev(FMODE_EXCL) is supposed to do this check. Steps to reproduce: dd if=/dev/zero of=/swapfile bs=$(cat /proc/meminfo | awk '/MemTotal/ {print $2}') count=1024 conv=notrunc mkswap /swapfile swapon /swapfile swap-offset /swapfile echo 34816 > /sys/power/resume_offset echo test_resume > /sys/power/disk echo disk > /sys/power/state PM: Using 3 thread(s) for compression PM: Compressing and saving image data (293150 pages)... PM: Image saving progress: 0% PM: Image saving progress: 10% ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) PM: Image saving progress: 20% PM: Image saving progress: 30% PM: Image saving progress: 40% PM: Image saving progress: 50% pcieport 0000:00:02.5: pciehp: Slot(0-5): No device found PM: Image saving progress: 60% PM: Image saving progress: 70% PM: Image saving progress: 80% PM: Image saving progress: 90% PM: Image saving done PM: hibernation: Wrote 1172600 kbytes in 2.70 seconds (434.29 MB/s) PM: S| PM: hibernation: Basic memory bitmaps freed PM: Image not found (code -16) This is because when using the swapfile as the hibernation storage, the block device where the swapfile is located has already been mounted by the OS distribution(usually mounted as the rootfs). This is not an issue for normal hibernation, because software_resume()->swsusp_check() happens before the block device(rootfs) mount. But it is a problem for the test_resume mode. Because when test_resume happens, the block device has been mounted already. Thus remove the FMODE_EXCL for test_resume mode. This would not be a problem because in test_resume stage, the processes have already been frozen, and the race condition described in Commit 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()") is unlikely to happen. Fixes: 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()") Reported-by: Yifan Li <yifan2.li@intel.com> Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Tested-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5904de0d735bbb3b4afe9375c5b4f9748f882945 ]

The system refused to do a test_resume because it found that the
swap device has already been taken by someone else. Specifically,
the swsusp_check()->blkdev_get_by_dev(FMODE_EXCL) is supposed to
do this check.

Steps to reproduce:
 dd if=/dev/zero of=/swapfile bs=$(cat /proc/meminfo |
       awk '/MemTotal/ {print $2}') count=1024 conv=notrunc
 mkswap /swapfile
 swapon /swapfile
 swap-offset /swapfile
 echo 34816 > /sys/power/resume_offset
 echo test_resume > /sys/power/disk
 echo disk > /sys/power/state

 PM: Using 3 thread(s) for compression
 PM: Compressing and saving image data (293150 pages)...
 PM: Image saving progress:   0%
 PM: Image saving progress:  10%
 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
 ata1.00: configured for UDMA/100
 ata2: SATA link down (SStatus 0 SControl 300)
 ata5: SATA link down (SStatus 0 SControl 300)
 ata6: SATA link down (SStatus 0 SControl 300)
 ata3: SATA link down (SStatus 0 SControl 300)
 ata4: SATA link down (SStatus 0 SControl 300)
 PM: Image saving progress:  20%
 PM: Image saving progress:  30%
 PM: Image saving progress:  40%
 PM: Image saving progress:  50%
 pcieport 0000:00:02.5: pciehp: Slot(0-5): No device found
 PM: Image saving progress:  60%
 PM: Image saving progress:  70%
 PM: Image saving progress:  80%
 PM: Image saving progress:  90%
 PM: Image saving done
 PM: hibernation: Wrote 1172600 kbytes in 2.70 seconds (434.29 MB/s)
 PM: S|
 PM: hibernation: Basic memory bitmaps freed
 PM: Image not found (code -16)

This is because when using the swapfile as the hibernation storage,
the block device where the swapfile is located has already been mounted
by the OS distribution(usually mounted as the rootfs). This is not
an issue for normal hibernation, because software_resume()->swsusp_check()
happens before the block device(rootfs) mount. But it is a problem for the
test_resume mode. Because when test_resume happens, the block device has
been mounted already.

Thus remove the FMODE_EXCL for test_resume mode. This would not be a
problem because in test_resume stage, the processes have already been
frozen, and the race condition described in
Commit 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()")
is unlikely to happen.

Fixes: 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()")
Reported-by: Yifan Li <yifan2.li@intel.com>
Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>