linux.git/kernel/smp.c, branch v6.1.168

smp: Fix up and expand the smp_call_function_many() kerneldoc

2025-10-15T09:56:29+00:00

[ Upstream commit ccf09357ffef2ab472369ab9cdf470c9bc9b821a ]

The smp_call_function_many() kerneldoc comment got out of sync with the
function definition (bool parameter "wait" is incorrectly described as a
bitmask in it), so fix it up by copying the "wait" description from the
smp_call_function() kerneldoc and add information regarding the handling
of the local CPU to it.

Fixes: 49b3bd213a9f ("smp: Fix all kernel-doc warnings")
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Sasha Levin

smp: Add missing destroy_work_on_stack() call in smp_call_on_cpu()

2024-09-12T09:10:24+00:00

[ Upstream commit 77aeb1b685f9db73d276bad4bb30d48505a6fd23 ]

For CONFIG_DEBUG_OBJECTS_WORK=y kernels sscs.work defined by
INIT_WORK_ONSTACK() is initialized by debug_object_init_on_stack() for
the debug check in __init_work() to work correctly.

But this lacks the counterpart to remove the tracked object from debug
objects again, which will cause a debug object warning once the stack is
freed.

Add the missing destroy_work_on_stack() invocation to cure that.

[ tglx: Massaged changelog ]

Signed-off-by: Zqiang 
Signed-off-by: Thomas Gleixner 
Tested-by: Paul E. McKenney 
Link: https://lore.kernel.org/r/20240704065213.13559-1-qiang.zhang1211@gmail.com
Signed-off-by: Sasha Levin

smp,csd: Throw an error if a CSD lock is stuck for too long

2023-11-28T17:06:55+00:00

[ Upstream commit 94b3f0b5af2c7af69e3d6e0cdd9b0ea535f22186 ]

The CSD lock seems to get stuck in 2 "modes". When it gets stuck
temporarily, it usually gets released in a few seconds, and sometimes
up to one or two minutes.

If the CSD lock stays stuck for more than several minutes, it never
seems to get unstuck, and gradually more and more things in the system
end up also getting stuck.

In the latter case, we should just give up, so the system can dump out
a little more information about what went wrong, and, with panic_on_oops
and a kdump kernel loaded, dump a whole bunch more information about what
might have gone wrong.  In addition, there is an smp.panic_on_ipistall
kernel boot parameter that by default retains the old behavior, but when
set enables the panic after the CSD lock has been stuck for more than
the specified number of milliseconds, as in 300,000 for five minutes.

[ paulmck: Apply Imran Khan feedback. ]
[ paulmck: Apply Leonardo Bras feedback. ]

Link: https://lore.kernel.org/lkml/bc7cc8b0-f587-4451-8bcd-0daae627bcc7@paulmck-laptop/
Signed-off-by: Rik van Riel 
Signed-off-by: Paul E. McKenney 
Reviewed-by: Imran Khan 
Reviewed-by: Leonardo Bras 
Cc: Peter Zijlstra 
Cc: Valentin Schneider 
Cc: Juergen Gross 
Cc: Jonathan Corbet 
Cc: Randy Dunlap 
Signed-off-by: Sasha Levin

Merge tag 'bitmap-6.1-rc1' of https://github.com/norov/linux

2022-10-10T19:49:34+00:00

Pull bitmap updates from Yury Norov:

 - Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)

 - cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)

   This series cleans that mess and adds new config FORCE_NR_CPUS that
   allows to optimize cpumask subsystem if the number of CPUs is known
   at compile-time.

 - optimize find_bit() functions (me)

   Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
   macros.

 - add find_nth_bit() (me)

   Adds find_nth_bit(), which is ~70 times faster than bitcounting with
   for_each() loop:

	for_each_set_bit(bit, mask, size)
		if (n-- == 0)
			return bit;

   Also adds bitmap_weight_and() to let people replace this pattern:

	tmp = bitmap_alloc(nbits);
	bitmap_and(tmp, map1, map2, nbits);
	weight = bitmap_weight(tmp, nbits);
	bitmap_free(tmp);

   with a single bitmap_weight_and() call.

 - repair cpumask_check() (me)

   After switching cpumask to use nr_cpu_ids, cpumask_check() started
   generating many false-positive warnings. This series fixes it.

 - Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
   Schneider)

   Extends the API with one more function and applies it in sched/core.

* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
  sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
  lib/test_cpumask: Add for_each_cpu_and(not) tests
  cpumask: Introduce for_each_cpu_andnot()
  lib/find_bit: Introduce find_next_andnot_bit()
  cpumask: fix checking valid cpu range
  lib/bitmap: add tests for for_each() loops
  lib/find: optimize for_each() macros
  lib/bitmap: introduce for_each_set_bit_wrap() macro
  lib/find_bit: add find_next{,_and}_bit_wrap
  cpumask: switch for_each_cpu{,_not} to use for_each_bit()
  net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
  cpumask: add cpumask_nth_{,and,andnot}
  lib/bitmap: remove bitmap_ord_to_pos
  lib/bitmap: add tests for find_nth_bit()
  lib: add find_nth{,_and,_andnot}_bit()
  lib/bitmap: add bitmap_weight_and()
  lib/bitmap: don't call __bitmap_weight() in kernel code
  tools: sync find_bit() implementation
  lib/find_bit: optimize find_next_bit() functions
  lib/find_bit: create find_first_zero_bit_le()
  ...

lib/cpumask: add FORCE_NR_CPUS config option

2022-09-20T23:11:44+00:00

The size of cpumasks is hard-limited by compile-time parameter NR_CPUS,
but defined at boot-time when kernel parses ACPI/DT tables, and stored in
nr_cpu_ids. In many practical cases, number of CPUs for a target is known
at compile time, and can be provided with NR_CPUS.

In that case, compiler may be instructed to rely on NR_CPUS as on actual
number of CPUs, not an upper limit. It allows to optimize many cpumask
routines and significantly shrink size of the kernel image.

This patch adds FORCE_NR_CPUS option to teach the compiler to rely on
NR_CPUS and enable corresponding optimizations.

If FORCE_NR_CPUS=y, kernel will not set nr_cpu_ids at boot, but only check
that the actual number of possible CPUs is equal to NR_CPUS, and WARN if
that doesn't hold.

The new option is especially useful in embedded applications because
kernel configurations are unique for each SoC, the number of CPUs is
constant and known well, and memory limitations are typically harder.

For my 4-CPU ARM64 build with NR_CPUS=4, FORCE_NR_CPUS=y saves 46KB:
  add/remove: 3/4 grow/shrink: 46/729 up/down: 652/-46952 (-46300)

Signed-off-by: Yury Norov

smp: add set_nr_cpu_ids()

2022-09-20T00:51:53+00:00

In preparation to support compile-time nr_cpu_ids, add a setter for
the variable.

This is a no-op for all arches.

Signed-off-by: Yury Norov

smp: don't declare nr_cpu_ids if NR_CPUS == 1

2022-09-20T00:51:53+00:00

SMP and NR_CPUS are independent options, hence nr_cpu_ids may be
declared even if NR_CPUS == 1, which is useless.

Signed-off-by: Yury Norov

sched/debug: Try trigger_single_cpu_backtrace(cpu) in dump_cpu_task()

2022-08-31T12:03:14+00:00

The trigger_all_cpu_backtrace() function attempts to send an NMI to the
target CPU, which usually provides much better stack traces than the
dump_cpu_task() function's approach of dumping that stack from some other
CPU.  So much so that most calls to dump_cpu_task() only happen after
a call to trigger_all_cpu_backtrace() has failed.  And the exception to
this rule really should attempt to use trigger_all_cpu_backtrace() first.

Therefore, move the trigger_all_cpu_backtrace() invocation into
dump_cpu_task().

Signed-off-by: Zhen Lei 
Signed-off-by: Paul E. McKenney 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Juri Lelli 
Cc: Vincent Guittot 
Cc: Dietmar Eggemann 
Cc: Ben Segall 
Cc: Mel Gorman 
Cc: Daniel Bristot de Oliveira 
Cc: Valentin Schneider

locking/csd_lock: Change csdlock_debug from early_param to __setup

2022-07-19T18:40:00+00:00

The csdlock_debug kernel-boot parameter is parsed by the
early_param() function csdlock_debug().  If set, csdlock_debug()
invokes static_branch_enable() to enable csd_lock_wait feature, which
triggers a panic on arm64 for kernels built with CONFIG_SPARSEMEM=y and
CONFIG_SPARSEMEM_VMEMMAP=n.

With CONFIG_SPARSEMEM_VMEMMAP=n, __nr_to_section is called in
static_key_enable() and returns NULL, resulting in a NULL dereference
because mem_section is initialized only later in sparse_init().

This is also a problem for powerpc because early_param() functions
are invoked earlier than jump_label_init(), also resulting in
static_key_enable() failures.  These failures cause the warning "static
key 'xxx' used before call to jump_label_init()".

Thus, early_param is too early for csd_lock_wait to run
static_branch_enable(), so changes it to __setup to fix these.

Fixes: 8d0968cc6b8f ("locking/csd_lock: Add boot parameter for controlling CSD lock debugging")
Cc: stable@vger.kernel.org
Reported-by: Chen jingwen 
Signed-off-by: Chen Zhongjin 
Signed-off-by: Paul E. McKenney

Merge tag 'sched-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2022-05-24T18:11:13+00:00

Pull scheduler updates from Ingo Molnar:

 - Updates to scheduler metrics:
     - PELT fixes & enhancements
     - PSI fixes & enhancements
     - Refactor cpu_util_without()

 - Updates to instrumentation/debugging:
     - Remove sched_trace_*() helper functions - can be done via debug
       info
     - Fix double update_rq_clock() warnings

 - Introduce & use "preemption model accessors" to simplify some of the
   Kconfig complexity.

 - Make softirq handling RT-safe.

 - Misc smaller fixes & cleanups.

* tag 'sched-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  topology: Remove unused cpu_cluster_mask()
  sched: Reverse sched_class layout
  sched/deadline: Remove superfluous rq clock update in push_dl_task()
  sched/core: Avoid obvious double update_rq_clock warning
  smp: Make softirq handling RT safe in flush_smp_call_function_queue()
  smp: Rename flush_smp_call_function_from_idle()
  sched: Fix missing prototype warnings
  sched/fair: Remove cfs_rq_tg_path()
  sched/fair: Remove sched_trace_*() helper functions
  sched/fair: Refactor cpu_util_without()
  sched/fair: Revise comment about lb decision matrix
  sched/psi: report zeroes for CPU full at the system level
  sched/fair: Delete useless condition in tg_unthrottle_up()
  sched/fair: Fix cfs_rq_clock_pelt() for throttled cfs_rq
  sched/fair: Move calculate of avg_load to a better location
  mailmap: Update my email address to @redhat.com
  MAINTAINERS: Add myself as scheduler topology reviewer
  psi: Fix trigger being fired unexpectedly at initial
  ftrace: Use preemption model accessors for trace header printout
  kcsan: Use preemption model accessors