linux.git/kernel/time, branch v4.14.145

timer_list: Guard procfs specific code

2019-07-31T05:28:28+00:00

[ Upstream commit a9314773a91a1d3b36270085246a6715a326ff00 ]

With CONFIG_PROC_FS=n the following warning is emitted:

kernel/time/timer_list.c:361:36: warning: unused variable
'timer_list_sops' [-Wunused-const-variable]
   static const struct seq_operations timer_list_sops = {

Add #ifdef guard around procfs specific code.

Signed-off-by: Nathan Huckleberry 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Nick Desaulniers 
Cc: john.stultz@linaro.org
Cc: sboyd@kernel.org
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/534
Link: https://lkml.kernel.org/r/20190614181604.112297-1-nhuck@google.com
Signed-off-by: Sasha Levin

ntp: Limit TAI-UTC offset

2019-07-31T05:28:27+00:00

[ Upstream commit d897a4ab11dc8a9fda50d2eccc081a96a6385998 ]

Don't allow the TAI-UTC offset of the system clock to be set by adjtimex()
to a value larger than 100000 seconds.

This prevents an overflow in the conversion to int, prevents the CLOCK_TAI
clock from getting too far ahead of the CLOCK_REALTIME clock, and it is
still large enough to allow leap seconds to be inserted at the maximum rate
currently supported by the kernel (once per day) for the next ~270 years,
however unlikely it is that someone can survive a catastrophic event which
slowed down the rotation of the Earth so much.

Reported-by: Weikang shi 
Signed-off-by: Miroslav Lichvar 
Signed-off-by: Thomas Gleixner 
Cc: John Stultz 
Cc: Prarit Bhargava 
Cc: Richard Cochran 
Cc: Stephen Boyd 
Link: https://lkml.kernel.org/r/20190618154713.20929-1-mlichvar@redhat.com
Signed-off-by: Sasha Levin

ntp: Allow TAI-UTC offset to be set to zero

2019-06-15T09:54:53+00:00

[ Upstream commit fdc6bae940ee9eb869e493990540098b8c0fd6ab ]

The ADJ_TAI adjtimex mode sets the TAI-UTC offset of the system clock.
It is typically set by NTP/PTP implementations and it is automatically
updated by the kernel on leap seconds. The initial value is zero (which
applications may interpret as unknown), but this value cannot be set by
adjtimex. This limitation seems to go back to the original "nanokernel"
implementation by David Mills.

Change the ADJ_TAI check to accept zero as a valid TAI-UTC offset in
order to allow setting it back to the initial value.

Fixes: 153b5d054ac2 ("ntp: support for TAI")
Suggested-by: Ondrej Mosnacek 
Signed-off-by: Miroslav Lichvar 
Signed-off-by: Thomas Gleixner 
Cc: John Stultz 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Link: https://lkml.kernel.org/r/20190417084833.7401-1-mlichvar@redhat.com
Signed-off-by: Sasha Levin

alarmtimer: Return correct remaining time

2019-04-17T06:37:52+00:00

commit 07d7e12091f4ab869cc6a4bb276399057e73b0b3 upstream.

To calculate a remaining time, it's required to subtract the current time
from the expiration time. In alarm_timer_remaining() the arguments of
ktime_sub are swapped.

Fixes: d653d8457c76 ("alarmtimer: Implement remaining callback")
Signed-off-by: Andrei Vagin 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Mukesh Ojha 
Cc: Stephen Boyd 
Cc: John Stultz 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190408041542.26338-1-avagin@gmail.com
Signed-off-by: Greg Kroah-Hartman

timekeeping: Use proper seqcount initializer

2019-02-12T18:46:01+00:00

[ Upstream commit ce10a5b3954f2514af726beb78ed8d7350c5e41c ]

tk_core.seq is initialized open coded, but that misses to initialize the
lockdep map when lockdep is enabled. Lockdep splats involving tk_core seq
consequently lack a name and are hard to read.

Use the proper initializer which takes care of the lockdep map
initialization.

[ tglx: Massaged changelog ]

Signed-off-by: Bart Van Assche 
Signed-off-by: Thomas Gleixner 
Cc: peterz@infradead.org
Cc: tj@kernel.org
Cc: johannes.berg@intel.com
Link: https://lkml.kernel.org/r/20181128234325.110011-12-bvanassche@acm.org
Signed-off-by: Sasha Levin

posix-cpu-timers: Unbreak timer rearming

2019-01-31T07:13:46+00:00

commit 93ad0fc088c5b4631f796c995bdd27a082ef33a6 upstream.

The recent commit which prevented a division by 0 issue in the alarm timer
code broke posix CPU timers as an unwanted side effect.

The reason is that the common rearm code checks for timer->it_interval
being 0 now. What went unnoticed is that the posix cpu timer setup does not
initialize timer->it_interval as it stores the interval in CPU timer
specific storage. The reason for the separate storage is historical as the
posix CPU timers always had a 64bit nanoseconds representation internally
while timer->it_interval is type ktime_t which used to be a modified
timespec representation on 32bit machines.

Instead of reverting the offending commit and fixing the alarmtimer issue
in the alarmtimer code, store the interval in timer->it_interval at CPU
timer setup time so the common code check works. This also repairs the
existing inconistency of the posix CPU timer code which kept a single shot
timer armed despite of the interval being 0.

The separate storage can be removed in mainline, but that needs to be a
separate commit as the current one has to be backported to stable kernels.

Fixes: 0e334db6bb4b ("posix-timers: Fix division by zero bug")
Reported-by: H.J. Lu 
Signed-off-by: Thomas Gleixner 
Cc: John Stultz 
Cc: Peter Zijlstra 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190111133500.840117406@linutronix.de
Signed-off-by: Greg Kroah-Hartman

posix-timers: Fix division by zero bug

2018-12-29T12:39:09+00:00

commit 0e334db6bb4b1fd1e2d72c1f3d8f004313cd9f94 upstream.

The signal delivery path of posix-timers can try to rearm the timer even if
the interval is zero. That's handled for the common case (hrtimer) but not
for alarm timers. In that case the forwarding function raises a division by
zero exception.

The handling for hrtimer based posix timers is wrong because it marks the
timer as active despite the fact that it is stopped.

Move the check from common_hrtimer_rearm() to posixtimer_rearm() to cure
both issues.

Reported-by: syzbot+9d38bedac9cc77b8ad5e@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner 
Cc: John Stultz 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: sboyd@kernel.org
Cc: stable@vger.kernel.org
Cc: syzkaller-bugs@googlegroups.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1812171328050.1880@nanos.tec.linutronix.de
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

timer/debug: Change /proc/timer_list from 0444 to 0400

2018-12-21T13:13:04+00:00

[ Upstream commit 8e7df2b5b7f245c9bd11064712db5cb69044a362 ]

While it uses %pK, there's still few reasons to read this file
as non-root.

Suggested-by: Linus Torvalds 
Acked-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin

posix-timers: Sanitize overrun handling

2018-10-04T00:00:50+00:00

[ Upstream commit 78c9c4dfbf8c04883941445a195276bb4bb92c76 ]

The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.

The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.

Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.

Reported-by: Team OWL337 
Signed-off-by: Thomas Gleixner 
Acked-by: John Stultz 
Cc: Peter Zijlstra 
Cc: Michael Kerrisk 
Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

posix-timers: Make forward callback return s64

2018-10-04T00:00:50+00:00

[ Upstream commit 6fec64e1c92d5c715c6d0f50786daa7708266bde ]

The posix timer ti_overrun handling is broken because the forwarding
functions can return a huge number of overruns which does not fit in an
int. As a consequence timer_getoverrun(2) and siginfo::si_overrun can turn
into random number generators.

As a first step to address that let the timer_forward() callbacks return
the full 64 bit value.

Cast it to (int) temporarily until k_itimer::ti_overrun is converted to
64bit and the conversion to user space visible values is sanitized.

Reported-by: Team OWL337 
Signed-off-by: Thomas Gleixner 
Acked-by: John Stultz 
Cc: Peter Zijlstra 
Cc: Michael Kerrisk 
Link: https://lkml.kernel.org/r/20180626132704.922098090@linutronix.de
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman