linux.git/kernel/trace/ring_buffer.c, branch v4.14.34

kmemcheck: remove annotations

2018-02-22T14:42:23+00:00

commit 4950276672fce5c241857540f8561c440663673d upstream.

Patch series "kmemcheck: kill kmemcheck", v2.

As discussed at LSF/MM, kill kmemcheck.

KASan is a replacement that is able to work without the limitation of
kmemcheck (single CPU, slow).  KASan is already upstream.

We are also not aware of any users of kmemcheck (or users who don't
consider KASan as a suitable replacement).

The only objection was that since KASAN wasn't supported by all GCC
versions provided by distros at that time we should hold off for 2
years, and try again.

Now that 2 years have passed, and all distros provide gcc that supports
KASAN, kill kmemcheck again for the very same reasons.

This patch (of 4):

Remove kmemcheck annotations, and calls to kmemcheck from the kernel.

[alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs]
  Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com
Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com
Signed-off-by: Sasha Levin 
Cc: Alexander Potapenko 
Cc: Eric W. Biederman 
Cc: Michal Hocko 
Cc: Pekka Enberg 
Cc: Steven Rostedt 
Cc: Tim Hansen 
Cc: Vegard Nossum 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

ring-buffer: Do no reuse reader page if still in use

2018-01-02T19:31:03+00:00

commit ae415fa4c5248a8cf4faabd5a3c20576cb1ad607 upstream.

To free the reader page that is allocated with ring_buffer_alloc_read_page(),
ring_buffer_free_read_page() must be called. For faster performance, this
page can be reused by the ring buffer to avoid having to free and allocate
new pages.

The issue arises when the page is used with a splice pipe into the
networking code. The networking code may up the page counter for the page,
and keep it active while sending it is queued to go to the network. The
incrementing of the page ref does not prevent it from being reused in the
ring buffer, and this can cause the page that is being sent out to the
network to be modified before it is sent by reading new data.

Add a check to the page ref counter, and only reuse the page if it is not
being used anywhere else.

Fixes: 73a757e63114d ("ring-buffer: Return reader page back into existing ring buffer")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

ring-buffer: Mask out the info bits when returning buffer page length

2018-01-02T19:31:03+00:00

commit 45d8b80c2ac5d21cd1e2954431fb676bc2b1e099 upstream.

Two info bits were added to the "commit" part of the ring buffer data page
when returned to be consumed. This was to inform the user space readers that
events have been missed, and that the count may be stored at the end of the
page.

What wasn't handled, was the splice code that actually called a function to
return the length of the data in order to zero out the rest of the page
before sending it up to user space. These data bits were returned with the
length making the value negative, and that negative value was not checked.
It was compared to PAGE_SIZE, and only used if the size was less than
PAGE_SIZE. Luckily PAGE_SIZE is unsigned long which made the compare an
unsigned compare, meaning the negative size value did not end up causing a
large portion of memory to be randomly zeroed out.

Fixes: 66a8cb95ed040 ("ring-buffer: Add place holder recording of dropped events")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

ring-buffer: Have ring_buffer_alloc_read_page() return error on offline CPU

2017-08-02T18:23:02+00:00

Chunyu Hu reported:
  "per_cpu trace directories and files are created for all possible cpus,
   but only the cpus which have ever been on-lined have their own per cpu
   ring buffer (allocated by cpuhp threads). While trace_buffers_open, the
   open handler for trace file 'trace_pipe_raw' is always trying to access
   field of ring_buffer_per_cpu, and would panic with the NULL pointer.

   Align the behavior of trace_pipe_raw with trace_pipe, that returns -NODEV
   when openning it if that cpu does not have trace ring buffer.

   Reproduce:
   cat /sys/kernel/debug/tracing/per_cpu/cpu31/trace_pipe_raw
   (cpu31 is never on-lined, this is a 16 cores x86_64 box)

   Tested with:
   1) boot with maxcpus=14, read trace_pipe_raw of cpu15.
      Got -NODEV.
   2) oneline cpu15, read trace_pipe_raw of cpu15.
      Get the raw trace data.

   Call trace:
   [ 5760.950995] RIP: 0010:ring_buffer_alloc_read_page+0x32/0xe0
   [ 5760.961678]  tracing_buffers_read+0x1f6/0x230
   [ 5760.962695]  __vfs_read+0x37/0x160
   [ 5760.963498]  ? __vfs_read+0x5/0x160
   [ 5760.964339]  ? security_file_permission+0x9d/0xc0
   [ 5760.965451]  ? __vfs_read+0x5/0x160
   [ 5760.966280]  vfs_read+0x8c/0x130
   [ 5760.967070]  SyS_read+0x55/0xc0
   [ 5760.967779]  do_syscall_64+0x67/0x150
   [ 5760.968687]  entry_SYSCALL64_slow_path+0x25/0x25"

This was introduced by the addition of the feature to reuse reader pages
instead of re-allocating them. The problem is that the allocation of a
reader page (which is per cpu) does not check if the cpu is online and set
up for the ring buffer.

Link: http://lkml.kernel.org/r/1500880866-1177-1-git-send-email-chuhu@redhat.com

Cc: stable@vger.kernel.org
Fixes: 73a757e63114 ("ring-buffer: Return reader page back into existing ring buffer")
Reported-by: Chunyu Hu 
Signed-off-by: Steven Rostedt (VMware)

tracing/ring_buffer: Try harder to allocate

2017-07-19T12:22:12+00:00

ftrace can fail to allocate per-CPU ring buffer on systems with a large
number of CPUs coupled while large amounts of cache happening in the
page cache. Currently the ring buffer allocation doesn't retry in the VM
implementation even if direct-reclaim made some progress but still
wasn't able to find a free page. On retrying I see that the allocations
almost always succeed. The retry doesn't happen because __GFP_NORETRY is
used in the tracer to prevent the case where we might OOM, however if we
drop __GFP_NORETRY, we risk destabilizing the system if OOM killer is
triggered. To prevent this situation, use the __GFP_RETRY_MAYFAIL flag
introduced recently [1].

Tested the following still succeeds without destabilizing a system with
1GB memory.
echo 300000 > /sys/kernel/debug/tracing/buffer_size_kb

[1] https://marc.info/?l=linux-mm&m=149820805124906&w=2

Link: http://lkml.kernel.org/r/20170713021416.8897-1-joelaf@google.com

Cc: Tim Murray 
Cc: Ingo Molnar 
Cc: Andrew Morton 
Acked-by: Vlastimil Babka 
Acked-by: Johannes Weiner 
Acked-by: Michal Hocko 
Signed-off-by: Joel Fernandes 
Signed-off-by: Steven Rostedt (VMware)

Merge tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2017-05-04T01:41:21+00:00

Pull tracing updates from Steven Rostedt:
 "New features for this release:

   - Pretty much a full rewrite of the processing of function plugins.
     i.e. echo do_IRQ:stacktrace > set_ftrace_filter

   - The rewrite was needed to add plugins to be unique to tracing
     instances. i.e. mkdir instance/foo; cd instances/foo; echo
     do_IRQ:stacktrace > set_ftrace_filter The old way was written very
     hacky. This removes a lot of those hacks.

   - New "function-fork" tracing option. When set, pids in the
     set_ftrace_pid will have their children added when the processes
     with their pids listed in the set_ftrace_pid file forks.

   - Exposure of "maxactive" for kretprobe in kprobe_events

   - Allow for builtin init functions to be traced by the function
     tracer (via the kernel command line). Module init function tracing
     will come in the next release.

   - Added more selftests, and have selftests also test in an instance"

* tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (60 commits)
  ring-buffer: Return reader page back into existing ring buffer
  selftests: ftrace: Allow some event trigger tests to run in an instance
  selftests: ftrace: Have some basic tests run in a tracing instance too
  selftests: ftrace: Have event tests also run in an tracing instance
  selftests: ftrace: Make func_event_triggers and func_traceonoff_triggers tests do instances
  selftests: ftrace: Allow some tests to be run in a tracing instance
  tracing/ftrace: Allow for instances to trigger their own stacktrace probes
  tracing/ftrace: Allow for the traceonoff probe be unique to instances
  tracing/ftrace: Enable snapshot function trigger to work with instances
  tracing/ftrace: Allow instances to have their own function probes
  tracing/ftrace: Add a better way to pass data via the probe functions
  ftrace: Dynamically create the probe ftrace_ops for the trace_array
  tracing: Pass the trace_array into ftrace_probe_ops functions
  tracing: Have the trace_array hold the list of registered func probes
  ftrace: If the hash for a probe fails to update then free what was initialized
  ftrace: Have the function probes call their own function
  ftrace: Have each function probe use its own ftrace_ops
  ftrace: Have unregister_ftrace_function_probe_func() return a value
  ftrace: Add helper function ftrace_hash_move_and_update_ops()
  ftrace: Remove data field from ftrace_func_probe structure
  ...

ring-buffer: Return reader page back into existing ring buffer

2017-05-01T14:26:40+00:00

When reading the ring buffer for consuming, it is optimized for splice,
where a page is taken out of the ring buffer (zero copy) and sent to the
reading consumer. When the read is finished with the page, it calls
ring_buffer_free_read_page(), which simply frees the page. The next time the
reader needs to get a page from the ring buffer, it must call
ring_buffer_alloc_read_page() which allocates and initializes a reader page
for the ring buffer to be swapped into the ring buffer for a new filled page
for the reader.

The problem is that there's no reason to actually free the page when it is
passed back to the ring buffer. It can hold it off and reuse it for the next
iteration. This completely removes the interaction with the page_alloc
mechanism.

Using the trace-cmd utility to record all events (causing trace-cmd to
require reading lots of pages from the ring buffer, and calling
ring_buffer_alloc/free_read_page() several times), and also assigning a
stack trace trigger to the mm_page_alloc event, we can see how many times
the ring_buffer_alloc_read_page() needed to allocate a page for the ring
buffer.

Before this change:

  # trace-cmd record -e all -e mem_page_alloc -R stacktrace sleep 1
  # trace-cmd report |grep ring_buffer_alloc_read_page | wc -l
  9968

After this change:

  # trace-cmd record -e all -e mem_page_alloc -R stacktrace sleep 1
  # trace-cmd report |grep ring_buffer_alloc_read_page | wc -l
  4

Signed-off-by: Steven Rostedt (VMware)

ring-buffer: Have ring_buffer_iter_empty() return true when empty

2017-04-20T01:23:47+00:00

I noticed that reading the snapshot file when it is empty no longer gives a
status. It suppose to show the status of the snapshot buffer as well as how
to allocate and use it. For example:

 ># cat snapshot
 # tracer: nop
 #
 #
 # * Snapshot is allocated *
 #
 # Snapshot commands:
 # echo 0 > snapshot : Clears and frees snapshot buffer
 # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
 #                      Takes a snapshot of the main buffer.
 # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
 #                      (Doesn't have to be '2' works with any number that
 #                       is not a '0' or '1')

But instead it just showed an empty buffer:

 ># cat snapshot
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 0/0   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |

What happened was that it was using the ring_buffer_iter_empty() function to
see if it was empty, and if it was, it showed the status. But that function
was returning false when it was empty. The reason was that the iter header
page was on the reader page, and the reader page was empty, but so was the
buffer itself. The check only tested to see if the iter was on the commit
page, but the commit page was no longer pointing to the reader page, but as
all pages were empty, the buffer is also.

Cc: stable@vger.kernel.org
Fixes: 651e22f2701b ("ring-buffer: Always reset iterator to reader page")
Signed-off-by: Steven Rostedt (VMware)

ring-buffer: Fix return value check in test_ringbuffer()

2017-04-05T13:36:52+00:00

In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com

Cc: stable@vger.kernel.org
Fixes: 6c43e554a ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Wei Yongjun 
Signed-off-by: Steven Rostedt (VMware)

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:27+00:00

We are going to split  out of , which
will have to be picked up from other headers and .c files.

Create a trivial placeholder  file that just
maps to  to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar