linux.git/kernel/trace/ring_buffer.c, branch v4.18.19

ring-buffer: Allow for rescheduling when removing pages

2018-09-29T09:55:57+00:00

commit 83f365554e47997ec68dc4eca3f5dce525cd15c3 upstream.

When reducing ring buffer size, pages are removed by scheduling a work
item on each CPU for the corresponding CPU ring buffer. After the pages
are removed from ring buffer linked list, the pages are free()d in a
tight loop. The loop does not give up CPU until all pages are removed.
In a worst case behavior, when lot of pages are to be freed, it can
cause system stall.

After the pages are removed from the list, the free() can happen while
the work is rescheduled. Call cond_resched() in the loop to prevent the
system hangup.

Link: http://lkml.kernel.org/r/20180907223129.71994-1-vnagarnaik@google.com

Cc: stable@vger.kernel.org
Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic")
Reported-by: Jason Behmer 
Signed-off-by: Vaibhav Nagarnaik 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

ring_buffer: tracing: Inherit the tracing setting to next ring buffer

2018-07-25T14:29:41+00:00

Maintain the tracing on/off setting of the ring_buffer when switching
to the trace buffer snapshot.

Taking a snapshot is done by swapping the backup ring buffer
(max_tr_buffer). But since the tracing on/off setting is defined
by the ring buffer, when swapping it, the tracing on/off setting
can also be changed. This causes a strange result like below:

  /sys/kernel/debug/tracing # cat tracing_on
  1
  /sys/kernel/debug/tracing # echo 0 > tracing_on
  /sys/kernel/debug/tracing # cat tracing_on
  0
  /sys/kernel/debug/tracing # echo 1 > snapshot
  /sys/kernel/debug/tracing # cat tracing_on
  1
  /sys/kernel/debug/tracing # echo 1 > snapshot
  /sys/kernel/debug/tracing # cat tracing_on
  0

We don't touch tracing_on, but snapshot changes tracing_on
setting each time. This is an anomaly, because user doesn't know
that each "ring_buffer" stores its own tracing-enable state and
the snapshot is done by swapping ring buffers.

Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox

Cc: Ingo Molnar 
Cc: Shuah Khan 
Cc: Tom Zanussi 
Cc: Hiraku Toyooka 
Cc: stable@vger.kernel.org
Fixes: debdd57f5145 ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Masami Hiramatsu 
[ Updated commit log and comment in the code ]
Signed-off-by: Steven Rostedt (VMware)

ring-buffer: Fix a bunch of typos in comments

2018-06-04T21:28:19+00:00

An anonymous source sent me a bunch of typo fixes in the comments of
ring_buffer.c file. That source did not want to be associated to this patch
because they don't want to be known as "one of those" commiters (you know who
you are!). They gave me permission to sign this off in my own name.

Suggested-by: One-of-those-commiters@YouKnowWhoYouAre.org
Signed-off-by: Steven Rostedt (VMware)

ring-buffer: Add set/clear_current_oom_origin() during allocations

2018-04-06T12:56:52+00:00

As si_mem_available() can say there is enough memory even though the memory
available is not useable by the ring buffer, it is best to not kill innocent
applications because the ring buffer is taking up all the memory while it is
trying to allocate a great deal of memory.

If the allocator is user space (because kernel threads can also increase the
size of the kernel ring buffer on boot up), then after si_mem_available()
says there is enough memory, set the OOM killer to kill the current task if
an OOM triggers during the allocation.

Link: http://lkml.kernel.org/r/20180404062340.GD6312@dhcp22.suse.cz

Suggested-by: Michal Hocko 
Signed-off-by: Steven Rostedt (VMware)

ring-buffer: Check if memory is available before allocation

2018-04-06T12:56:52+00:00

The ring buffer is made up of a link list of pages. When making the ring
buffer bigger, it will allocate all the pages it needs before adding to the
ring buffer, and if it fails, it frees them and returns an error. This makes
increasing the ring buffer size an all or nothing action. When this was
first created, the pages were allocated with "NORETRY". This was to not
cause any Out-Of-Memory (OOM) actions from allocating the ring buffer. But
NORETRY was too strict, as the ring buffer would fail to expand even when
there's memory available, but was taken up in the page cache.

Commit 848618857d253 ("tracing/ring_buffer: Try harder to allocate") changed
the allocating from NORETRY to RETRY_MAYFAIL. The RETRY_MAYFAIL would
allocate from the page cache, but if there was no memory available, it would
simple fail the allocation and not trigger an OOM.

This worked fine, but had one problem. As the ring buffer would allocate one
page at a time, it could take up all memory in the system before it failed
to allocate and free that memory. If the allocation is happening and the
ring buffer allocates all memory and then tries to take more than available,
its allocation will not trigger an OOM, but if there's any allocation that
happens someplace else, that could trigger an OOM, even though once the ring
buffer's allocation fails, it would free up all the previous memory it tried
to allocate, and allow other memory allocations to succeed.

Commit d02bd27bd33dd ("mm/page_alloc.c: calculate 'available' memory in a
separate function") separated out si_mem_availble() as a separate function
that could be used to see how much memory is available in the system. Using
this function to make sure that the ring buffer could be allocated before it
tries to allocate pages we can avoid allocating all memory in the system and
making it vulnerable to OOMs if other allocations are taking place.

Link: http://lkml.kernel.org/r/1522320104-6573-1-git-send-email-zhaoyang.huang@spreadtrum.com

CC: stable@vger.kernel.org
Cc: linux-mm@kvack.org
Fixes: 848618857d253 ("tracing/ring_buffer: Try harder to allocate")
Requires: d02bd27bd33dd ("mm/page_alloc.c: calculate 'available' memory in a separate function")
Reported-by: Zhaoyang Huang 
Tested-by: Joel Fernandes 
Signed-off-by: Steven Rostedt (VMware)

tracing: Mention trace_clock=global when warning about unstable clocks

2018-04-06T12:56:47+00:00

Mention the alternative of adding trace_clock=global to the kernel
command line when we detect that we've used an unstable clock across a
suspend/resume cycle.

Link: http://lkml.kernel.org/r/20180330150132.16903-2-chris@chris-wilson.co.uk

Signed-off-by: Chris Wilson 
Signed-off-by: Steven Rostedt (VMware)

ring-buffer: Add nesting for adding events within events

2018-03-10T21:06:04+00:00

The ring-buffer code has recusion protection in case tracing ends up tracing
itself, the ring-buffer will detect that it was called at the same context
(normal, softirq, interrupt or NMI), and not continue to record the event.

With the histogram synthetic events, they are called while tracing another
event at the same context. The recusion protection triggers because it
detects tracing at the same context and stops it.

Add ring_buffer_nest_start() and ring_buffer_nest_end() that will notify the
ring buffer that a trace is about to happen within another trace and that it
is intended, and not to trigger the recursion blocking.

Signed-off-by: Steven Rostedt (VMware)

ring-buffer: Redefine the unimplemented RINGBUF_TYPE_TIME_STAMP

2018-03-10T21:05:50+00:00

RINGBUF_TYPE_TIME_STAMP is defined but not used, and from what I can
gather was reserved for something like an absolute timestamp feature
for the ring buffer, if not a complete replacement of the current
time_delta scheme.

This code redefines RINGBUF_TYPE_TIME_STAMP to implement absolute time
stamps.  Another way to look at it is that it essentially forces
extended time_deltas for all events.

The motivation for doing this is to enable time_deltas that aren't
dependent on previous events in the ring buffer, making it feasible to
use the ring_buffer_event timetamps in a more random-access way, for
purposes other than serial event printing.

To set/reset this mode, use tracing_set_timestamp_abs() from the
previous interface patch.

Link: http://lkml.kernel.org/r/477b362dba1ce7fab9889a1a8e885a62c472f041.1516069914.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi 
Signed-off-by: Steven Rostedt (VMware)

ring-buffer: Add interface for setting absolute time stamps

2018-03-10T21:05:50+00:00

Define a new function, tracing_set_time_stamp_abs(), which can be used
to enable or disable the use of absolute timestamps rather than time
deltas for a trace array.

Only the interface is added here; a subsequent patch will add the
underlying implementation.

Link: http://lkml.kernel.org/r/ce96119de44c7fe0ee44786d15254e9b493040d3.1516069914.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi 
Signed-off-by: Baohong Liu 
Signed-off-by: Steven Rostedt (VMware)

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03+00:00

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro 
Signed-off-by: Linus Torvalds