linux.git/kernel/utsname.c, branch v6.6.131

uts: Use generic ns_common::count

2020-08-19T12:13:20+00:00

Switch over uts namespaces to use the newly introduced common lifetime
counter.

Currently every namespace type has its own lifetime counter which is stored
in the specific namespace struct. The lifetime counters are used
identically for all namespaces types. Namespaces may of course have
additional unrelated counters and these are not altered.

This introduces a common lifetime counter into struct ns_common. The
ns_common struct encompasses information that all namespaces share. That
should include the lifetime counter since its common for all of them.

It also allows us to unify the type of the counters across all namespaces.
Most of them use refcount_t but one uses atomic_t and at least one uses
kref. Especially the last one doesn't make much sense since it's just a
wrapper around refcount_t since 2016 and actually complicates cleanup
operations by having to use container_of() to cast the correct namespace
struct out of struct ns_common.

Having the lifetime counter for the namespaces in one place reduces
maintenance cost. Not just because after switching all namespaces over we
will have removed more code than we added but also because the logic is
more easily understandable and we indicate to the user that the basic
lifetime requirements for all namespaces are currently identical.

Signed-off-by: Kirill Tkhai 
Reviewed-by: Kees Cook 
Acked-by: Christian Brauner 
Link: https://lore.kernel.org/r/159644978167.604812.1773586504374412107.stgit@localhost.localdomain
Signed-off-by: Christian Brauner

nsproxy: add struct nsset

2020-05-09T11:57:12+00:00

Add a simple struct nsset. It holds all necessary pieces to switch to a new
set of namespaces without leaving a task in a half-switched state which we
will make use of in the next patch. This patch switches the existing setns
logic over without causing a change in setns() behavior. This brings
setns() closer to how unshare() works(). The prepare_ns() function is
responsible to prepare all necessary information. This has two reasons.
First it minimizes dependencies between individual namespaces, i.e. all
install handler can expect that all fields are properly initialized
independent in what order they are called in. Second, this makes the code
easier to maintain and easier to follow if it needs to be changed.

The prepare_ns() helper will only be switched over to use a flags argument
in the next patch. Here it will still use nstype as a simple integer
argument which was argued would be clearer. I'm not particularly
opinionated about this if it really helps or not. The struct nsset itself
already contains the flags field since its name already indicates that it
can contain information required by different namespaces. None of this
should have functional consequences.

Signed-off-by: Christian Brauner 
Reviewed-by: Serge Hallyn 
Cc: Eric W. Biederman 
Cc: Serge Hallyn 
Cc: Jann Horn 
Cc: Michael Kerrisk 
Cc: Aleksa Sarai 
Link: https://lore.kernel.org/r/20200505140432.181565-2-christian.brauner@ubuntu.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441

2019-06-05T15:37:17+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 315 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Armijn Hemel 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman

uts: create "struct uts_namespace" from kmem_cache

2018-04-11T17:28:35+00:00

So "struct uts_namespace" can enjoy fine-grained SLAB debugging and
usercopy protection.

I'd prefer shorter name "utsns" but there is "user_namespace" already.

Link: http://lkml.kernel.org/r/20180228215158.GA23146@avx2
Signed-off-by: Alexey Dobriyan 
Reviewed-by: Andrew Morton 
Cc: "Eric W. Biederman" 
Cc: Serge Hallyn 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

sched/headers: Prepare to move the task_lock()/unlock() APIs to

2017-03-02T07:42:38+00:00

But first update the code that uses these facilities with the
new header.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

sched/headers: Prepare to remove inclusion from

2017-03-02T07:42:31+00:00

Add #include  dependencies to all .c files rely on sched.h
doing that for them.

Note that even if the count where we need to add extra headers seems high,
it's still a net win, because  is included in over
2,200 files ...

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

Merge branch 'nsfs-ioctls' into HEAD

2016-09-23T01:00:36+00:00

From: Andrey Vagin 

Each namespace has an owning user namespace and now there is not way
to discover these relationships.

Pid and user namepaces are hierarchical. There is no way to discover
parent-child relationships too.

Why we may want to know relationships between namespaces?

One use would be visualization, in order to understand the running
system.  Another would be to answer the question: what capability does
process X have to perform operations on a resource governed by namespace
Y?

One more use-case (which usually called abnormal) is checkpoint/restart.
In CRIU we are going to dump and restore nested namespaces.

There [1] was a discussion about which interface to choose to determing
relationships between namespaces.

Eric suggested to add two ioctl-s [2]:
> Grumble, Grumble.  I think this may actually a case for creating ioctls
> for these two cases.  Now that random nsfs file descriptors are bind
> mountable the original reason for using proc files is not as pressing.
>
> One ioctl for the user namespace that owns a file descriptor.
> One ioctl for the parent namespace of a namespace file descriptor.

Here is an implementaions of these ioctl-s.

$ man man7/namespaces.7
...
Since  Linux  4.X,  the  following  ioctl(2)  calls are supported for
namespace file descriptors.  The correct syntax is:

      fd = ioctl(ns_fd, ioctl_type);

where ioctl_type is one of the following:

NS_GET_USERNS
      Returns a file descriptor that refers to an owning user names‐
      pace.

NS_GET_PARENT
      Returns  a  file descriptor that refers to a parent namespace.
      This ioctl(2) can be used for pid  and  user  namespaces.  For
      user namespaces, NS_GET_PARENT and NS_GET_USERNS have the same
      meaning.

In addition to generic ioctl(2) errors, the following  specific  ones
can occur:

EINVAL NS_GET_PARENT was called for a nonhierarchical namespace.

EPERM  The  requested  namespace  is outside of the current namespace
      scope.

[1] https://lkml.org/lkml/2016/7/6/158
[2] https://lkml.org/lkml/2016/7/9/101

Changes for v2:
* don't return ENOENT for init_user_ns and init_pid_ns. There is nothing
  outside of the init namespace, so we can return EPERM in this case too.
  > The fewer special cases the easier the code is to get
  > correct, and the easier it is to read. // Eric

Changes for v3:
* rename ns->get_owner() to ns->owner(). get_* usually means that it
  grabs a reference.

Cc: "Eric W. Biederman" 
Cc: James Bottomley 
Cc: "Michael Kerrisk (man-pages)" 
Cc: "W. Trevor King" 
Cc: Alexander Viro 
Cc: Serge Hallyn

kernel: add a helper to get an owning user namespace for a namespace

2016-09-23T00:59:39+00:00

Return -EPERM if an owning user namespace is outside of a process
current user namespace.

v2: In a first version ns_get_owner returned ENOENT for init_user_ns.
    This special cases was removed from this version. There is nothing
    outside of init_user_ns, so we can return EPERM.
v3: rename ns->get_owner() to ns->owner(). get_* usually means that it
grabs a reference.

Acked-by: Serge Hallyn 
Signed-off-by: Andrei Vagin 
Signed-off-by: Eric W. Biederman

userns: When the per user per user namespace limit is reached return ENOSPC

2016-09-22T18:25:56+00:00

The current error codes returned when a the per user per user
namespace limit are hit (EINVAL, EUSERS, and ENFILE) are wrong.  I
asked for advice on linux-api and it we made clear that those were
the wrong error code, but a correct effor code was not suggested.

The best general error code I have found for hitting a resource limit
is ENOSPC.  It is not perfect but as it is unambiguous it will serve
until someone comes up with a better error code.

Signed-off-by: "Eric W. Biederman"

utsns: Add a limit on the number of uts namespaces

2016-08-08T19:42:02+00:00

Acked-by: Kees Cook 
Signed-off-by: "Eric W. Biederman"