linux.git/kernel, branch v4.14.217

workqueue: Kick a worker based on the actual activation of delayed works

2021-01-12T19:09:05+00:00

[ Upstream commit 01341fbd0d8d4e717fc1231cdffe00343088ce0b ]

In realtime scenario, We do not want to have interference on the
isolated cpu cores. but when invoking alloc_workqueue() for percpu wq
on the housekeeping cpu, it kick a kworker on the isolated cpu.

  alloc_workqueue
    pwq_adjust_max_active
      wake_up_worker

The comment in pwq_adjust_max_active() said:
  "Need to kick a worker after thawed or an unbound wq's
   max_active is bumped"

So it is unnecessary to kick a kworker for percpu's wq when invoking
alloc_workqueue(). this patch only kick a worker based on the actual
activation of delayed works.

Signed-off-by: Yunfeng Ye 
Reviewed-by: Lai Jiangshan 
Signed-off-by: Tejun Heo 
Signed-off-by: Sasha Levin

module: delay kobject uevent until after module init call

2021-01-09T12:37:39+00:00

[ Upstream commit 38dc717e97153e46375ee21797aa54777e5498f3 ]

Apparently there has been a longstanding race between udev/systemd and
the module loader. Currently, the module loader sends a uevent right
after sysfs initialization, but before the module calls its init
function. However, some udev rules expect that the module has
initialized already upon receiving the uevent.

This race has been triggered recently (see link in references) in some
systemd mount unit files. For instance, the configfs module creates the
/sys/kernel/config mount point in its init function, however the module
loader issues the uevent before this happens. sys-kernel-config.mount
expects to be able to mount /sys/kernel/config upon receipt of the
module loading uevent, but if the configfs module has not called its
init function yet, then this directory will not exist and the mount unit
fails. A similar situation exists for sys-fs-fuse-connections.mount, as
the fuse sysfs mount point is created during the fuse module's init
function. If udev is faster than module initialization then the mount
unit would fail in a similar fashion.

To fix this race, delay the module KOBJ_ADD uevent until after the
module has finished calling its init routine.

References: https://github.com/systemd/systemd/issues/17586
Reviewed-by: Greg Kroah-Hartman 
Tested-By: Nicolas Morey-Chaisemartin 
Signed-off-by: Jessica Yu 
Signed-off-by: Sasha Levin

module: set MODULE_STATE_GOING state when a module fails to load

2021-01-09T12:37:38+00:00

[ Upstream commit 5e8ed280dab9eeabc1ba0b2db5dbe9fe6debb6b5 ]

If a module fails to load due to an error in prepare_coming_module(),
the following error handling in load_module() runs with
MODULE_STATE_COMING in module's state. Fix it by correctly setting
MODULE_STATE_GOING under "bug_cleanup" label.

Signed-off-by: Miroslav Benes 
Signed-off-by: Jessica Yu 
Signed-off-by: Sasha Levin

genirq/irqdomain: Don't try to free an interrupt that has no mapping

2020-12-29T12:46:56+00:00

[ Upstream commit 4615fbc3788ddc8e7c6d697714ad35a53729aa2c ]

When an interrupt allocation fails for N interrupts, it is pretty
common for the error handling code to free the same number of interrupts,
no matter how many interrupts have actually been allocated.

This may result in the domain freeing code to be unexpectedly called
for interrupts that have no mapping in that domain. Things end pretty
badly.

Instead, add some checks to irq_domain_free_irqs_hierarchy() to make sure
that thiss does not follow the hierarchy if no mapping exists for a given
interrupt.

Fixes: 6a6544e520abe ("genirq/irqdomain: Remove auto-recursive hierarchy support")
Signed-off-by: Marc Zyngier 
Signed-off-by: Thomas Gleixner 
Link: https://lore.kernel.org/r/20201129135551.396777-1-maz@kernel.org
Signed-off-by: Sasha Levin

sched: Reenable interrupts in do_sched_yield()

2020-12-29T12:46:51+00:00

[ Upstream commit 345a957fcc95630bf5535d7668a59ed983eb49a7 ]

do_sched_yield() invokes schedule() with interrupts disabled which is
not allowed. This goes back to the pre git era to commit a6efb709806c
("[PATCH] irqlock patch 2.5.27-H6") in the history tree.

Reenable interrupts and remove the misleading comment which "explains" it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Thomas Gleixner 
Signed-off-by: Peter Zijlstra (Intel) 
Link: https://lkml.kernel.org/r/87r1pt7y5c.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin

sched/deadline: Fix sched_dl_global_validate()

2020-12-29T12:46:51+00:00

[ Upstream commit a57415f5d1e43c3a5c5d412cd85e2792d7ed9b11 ]

When change sched_rt_{runtime, period}_us, we validate that the new
settings should at least accommodate the currently allocated -dl
bandwidth:

  sched_rt_handler()
    -->	sched_dl_bandwidth_validate()
	{
		new_bw = global_rt_runtime()/global_rt_period();

		for_each_possible_cpu(cpu) {
			dl_b = dl_bw_of(cpu);
			if (new_bw < dl_b->total_bw)    <-------
				ret = -EBUSY;
		}
	}

But under CONFIG_SMP, dl_bw is per root domain , but not per CPU,
dl_b->total_bw is the allocated bandwidth of the whole root domain.
Instead, we should compare dl_b->total_bw against "cpus*new_bw",
where 'cpus' is the number of CPUs of the root domain.

Also, below annotation(in kernel/sched/sched.h) implied implementation
only appeared in SCHED_DEADLINE v2[1], then deadline scheduler kept
evolving till got merged(v9), but the annotation remains unchanged,
meaningless and misleading, update it.

* With respect to SMP, the bandwidth is given on a per-CPU basis,
* meaning that:
*  - dl_bw (< 100%) is the bandwidth of the system (group) on each CPU;
*  - dl_total_bw array contains, in the i-eth element, the currently
*    allocated bandwidth on the i-eth CPU.

[1]: https://lore.kernel.org/lkml/1267385230.13676.101.camel@Palantir/

Fixes: 332ac17ef5bf ("sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks")
Signed-off-by: Peng Liu 
Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Daniel Bristot de Oliveira 
Acked-by: Juri Lelli 
Link: https://lkml.kernel.org/r/db6bbda316048cda7a1bbc9571defde193a8d67e.1602171061.git.iwtbavbm@gmail.com
Signed-off-by: Sasha Levin

kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling

2020-12-29T12:46:47+00:00

[ Upstream commit 8ff00399b153440c1c83e20c43020385b416415b ]

powerpc/64s keeps a counter in the mm which counts bits set in
mm_cpumask as well as other things. This means it can't use generic code
to clear bits out of the mask and doesn't adjust the arch specific
counter.

Add an arch override that allows powerpc/64s to use
clear_tasks_mm_cpumask().

Signed-off-by: Nicholas Piggin 
Reviewed-by: Aneesh Kumar K.V 
Acked-by: Peter Zijlstra (Intel) 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20201126102530.691335-4-npiggin@gmail.com
Signed-off-by: Sasha Levin

tracing: Fix userstacktrace option for instances

2020-12-11T12:39:06+00:00

commit bcee5278958802b40ee8b26679155a6d9231783e upstream.

When the instances were able to use their own options, the userstacktrace
option was left hardcoded for the top level. This made the instance
userstacktrace option bascially into a nop, and will confuse users that set
it, but nothing happens (I was confused when it happened to me!)

Cc: stable@vger.kernel.org
Fixes: 16270145ce6b ("tracing: Add trace options for core options to instances")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

ftrace: Fix updating FTRACE_FL_TRAMP

2020-12-11T12:39:05+00:00

commit 4c75b0ff4e4bf7a45b5aef9639799719c28d0073 upstream.

On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in
ftrace_get_addr_new() followed by the below message:
  Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001)

The set of steps leading to this involved:
- modprobe ftrace-direct-too
- enable_probe
- modprobe ftrace-direct
- rmmod ftrace-direct <-- trigger

The problem turned out to be that we were not updating flags in the
ftrace record properly. From the above message about the trampoline
accounting being bad, it can be seen that the ftrace record still has
FTRACE_FL_TRAMP set though ftrace-direct module is going away. This
happens because we are checking if any ftrace_ops has the
FTRACE_FL_TRAMP flag set _before_ updating the filter hash.

The fix for this is to look for any _other_ ftrace_ops that also needs
FTRACE_FL_TRAMP.

Link: https://lkml.kernel.org/r/56c113aa9c3e10c19144a36d9684c7882bf09af5.1606412433.git.naveen.n.rao@linux.vnet.ibm.com

Cc: stable@vger.kernel.org
Fixes: a124692b698b0 ("ftrace: Enable trampoline when rec count returns back to one")
Signed-off-by: Naveen N. Rao 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

reboot: fix overflow parsing reboot cpu number

2020-11-18T17:28:02+00:00

commit df5b0ab3e08a156701b537809914b339b0daa526 upstream.

Limit the CPU number to num_possible_cpus(), because setting it to a
value lower than INT_MAX but higher than NR_CPUS produces the following
error on reboot and shutdown:

    BUG: unable to handle page fault for address: ffffffff90ab1bb0
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
    RIP: 0010:migrate_to_reboot_cpu+0xe/0x60
    Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c
    RSP: 0018:ffffc90000013e08 EFLAGS: 00010246
    RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000
    RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0
    RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000
    FS:  00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
      __do_sys_reboot.cold+0x34/0x5b
      do_syscall_64+0x2d/0x40

Fixes: 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic kernel")
Signed-off-by: Matteo Croce 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Fabian Frederick 
Cc: Greg Kroah-Hartman 
Cc: Guenter Roeck 
Cc: Kees Cook 
Cc: Mike Rapoport 
Cc: Pavel Tatashin 
Cc: Petr Mladek 
Cc: Robin Holt 
Cc: 
Link: https://lkml.kernel.org/r/20201103214025.116799-3-mcroce@linux.microsoft.com
Signed-off-by: Linus Torvalds 
[sudip: use reboot_mode instead of mode]
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman