linux.git/kernel, branch v6.6.120

sched/fair: Proportional newidle balance

2026-01-11T14:22:30+00:00

commit 33cf66d88306663d16e4759e9d24766b0aaa2e17 upstream.

Add a randomized algorithm that runs newidle balancing proportional to
its success rate.

This improves schbench significantly:

 6.18-rc4:			2.22 Mrps/s
 6.18-rc4+revert:		2.04 Mrps/s
 6.18-rc4+revert+random:	2.18 Mrps/S

Conversely, per Adam Li this affects SpecJBB slightly, reducing it by 1%:

 6.17:			-6%
 6.17+revert:		 0%
 6.17+revert+random:	-1%

Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Dietmar Eggemann 
Tested-by: Dietmar Eggemann 
Tested-by: Chris Mason 
Link: https://lkml.kernel.org/r/6825c50d-7fa7-45d8-9b81-c6e7e25738e2@meta.com
Link: https://patch.msgid.link/20251107161739.770122091@infradead.org
[ Ajay: Modified to apply on v6.6 ]
Signed-off-by: Ajay Kaher 
Signed-off-by: Greg Kroah-Hartman

sched/fair: Small cleanup to update_newidle_cost()

2026-01-11T14:22:30+00:00

commit 08d473dd8718e4a4d698b1113a14a40ad64a909b upstream.

Simplify code by adding a few variables.

Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Dietmar Eggemann 
Tested-by: Dietmar Eggemann 
Tested-by: Chris Mason 
Link: https://patch.msgid.link/20251107161739.655208666@infradead.org
[ Ajay: Modified to apply on v6.6 ]
Signed-off-by: Ajay Kaher 
Signed-off-by: Greg Kroah-Hartman

sched/fair: Small cleanup to sched_balance_newidle()

2026-01-11T14:22:30+00:00

commit e78e70dbf603c1425f15f32b455ca148c932f6c1 upstream.

Pull out the !sd check to simplify code.

Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Dietmar Eggemann 
Tested-by: Dietmar Eggemann 
Tested-by: Chris Mason 
Link: https://patch.msgid.link/20251107161739.525916173@infradead.org
[ Ajay: Modified to apply on v6.6 ]
Signed-off-by: Ajay Kaher 
Signed-off-by: Greg Kroah-Hartman

genirq/irq_sim: Initialize work context pointers properly

2026-01-11T14:22:27+00:00

[ Upstream commit 8a2277a3c9e4cc5398f80821afe7ecbe9bdf2819 ]

Initialize `ops` member's pointers properly by using kzalloc() instead of
kmalloc() when allocating the simulation work context. Otherwise the
pointers contain random content leading to invalid dereferencing.

Signed-off-by: Gyeyoung Baek 
Signed-off-by: Thomas Gleixner 
Link: https://lore.kernel.org/all/20250612124827.63259-1-gye976@gmail.com
[ The context change is due to the commit 011f583781fa
("genirq/irq_sim: add an extended irq_sim initializer")
which is irrelevant to the logic of this patch. ]
Signed-off-by: Rahul Sharma 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix fixed array of synthetic event

2026-01-11T14:22:03+00:00

commit 47ef834209e5981f443240d8a8b45bf680df22aa upstream.

The commit 4d38328eb442d ("tracing: Fix synth event printk format for str
fields") replaced "%.*s" with "%s" but missed removing the number size of
the dynamic and static strings. The commit e1a453a57bc7 ("tracing: Do not
add length to print format in synthetic events") fixed the dynamic part
but did not fix the static part. That is, with the commands:

  # echo 's:wake_lat char[] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
  # echo 'hist:keys=pid:ts=common_timestamp.usecs if !(common_flags & 0x18)' > /sys/kernel/tracing/events/sched/sched_waking/trigger
  # echo 'hist:keys=next_pid:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,next_comm,$delta)' > /sys/kernel/tracing/events/sched/sched_switch/trigger

That caused the output of:

          -0       [001] d..5.   193.428167: wake_lat: wakee=(efault)sshd-sessiondelta=155
    sshd-session-879     [001] d..5.   193.811080: wake_lat: wakee=(efault)kworker/u34:5delta=58
          -0       [002] d..5.   193.811198: wake_lat: wakee=(efault)bashdelta=91

The commit e1a453a57bc7 fixed the part where the synthetic event had
"char[] wakee". But if one were to replace that with a static size string:

  # echo 's:wake_lat char[16] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events

Where "wakee" is defined as "char[16]" and not "char[]" making it a static
size, the code triggered the "(efaul)" again.

Remove the added STR_VAR_LEN_MAX size as the string is still going to be
nul terminated.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu 
Cc: Mathieu Desnoyers 
Cc: Douglas Raillard 
Link: https://patch.msgid.link/20251204151935.5fa30355@gandalf.local.home
Fixes: e1a453a57bc7 ("tracing: Do not add length to print format in synthetic events")
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Greg Kroah-Hartman

tracing: Do not register unsupported perf events

2026-01-11T14:22:01+00:00

commit ef7f38df890f5dcd2ae62f8dbde191d72f3bebae upstream.

Synthetic events currently do not have a function to register perf events.
This leads to calling the tracepoint register functions with a NULL
function pointer which triggers:

 ------------[ cut here ]------------
 WARNING: kernel/tracepoint.c:175 at tracepoint_add_func+0x357/0x370, CPU#2: perf/2272
 Modules linked in: kvm_intel kvm irqbypass
 CPU: 2 UID: 0 PID: 2272 Comm: perf Not tainted 6.18.0-ftest-11964-ge022764176fc-dirty #323 PREEMPTLAZY
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
 RIP: 0010:tracepoint_add_func+0x357/0x370
 Code: 28 9c e8 4c 0b f5 ff eb 0f 4c 89 f7 48 c7 c6 80 4d 28 9c e8 ab 89 f4 ff 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc <0f> 0b 49 c7 c6 ea ff ff ff e9 ee fe ff ff 0f 0b e9 f9 fe ff ff 0f
 RSP: 0018:ffffabc0c44d3c40 EFLAGS: 00010246
 RAX: 0000000000000001 RBX: ffff9380aa9e4060 RCX: 0000000000000000
 RDX: 000000000000000a RSI: ffffffff9e1d4a98 RDI: ffff937fcf5fd6c8
 RBP: 0000000000000001 R08: 0000000000000007 R09: ffff937fcf5fc780
 R10: 0000000000000003 R11: ffffffff9c193910 R12: 000000000000000a
 R13: ffffffff9e1e5888 R14: 0000000000000000 R15: ffffabc0c44d3c78
 FS:  00007f6202f5f340(0000) GS:ffff93819f00f000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055d3162281a8 CR3: 0000000106a56003 CR4: 0000000000172ef0
 Call Trace:
  
  tracepoint_probe_register+0x5d/0x90
  synth_event_reg+0x3c/0x60
  perf_trace_event_init+0x204/0x340
  perf_trace_init+0x85/0xd0
  perf_tp_event_init+0x2e/0x50
  perf_try_init_event+0x6f/0x230
  ? perf_event_alloc+0x4bb/0xdc0
  perf_event_alloc+0x65a/0xdc0
  __se_sys_perf_event_open+0x290/0x9f0
  do_syscall_64+0x93/0x7b0
  ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
  ? trace_hardirqs_off+0x53/0xc0
  entry_SYSCALL_64_after_hwframe+0x76/0x7e

Instead, have the code return -ENODEV, which doesn't warn and has perf
error out with:

 # perf record -e synthetic:futex_wait
Error:
The sys_perf_event_open() syscall returned with 19 (No such device) for event (synthetic:futex_wait).
"dmesg | grep -i perf" may provide additional information.

Ideally perf should support synthetic events, but for now just fix the
warning. The support can come later.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu 
Cc: Mathieu Desnoyers 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://patch.msgid.link/20251216182440.147e4453@gandalf.local.home
Fixes: 4b147936fa509 ("tracing: Add support for 'synthetic' events")
Reported-by: Ian Rogers 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Greg Kroah-Hartman

scs: fix a wrong parameter in __scs_magic

2026-01-11T14:22:00+00:00

commit 08bd4c46d5e63b78e77f2605283874bbe868ab19 upstream.

__scs_magic() needs a 'void *' variable, but a 'struct task_struct *' is
given.  'task_scs(tsk)' is the starting address of the task's shadow call
stack, and '__scs_magic(task_scs(tsk))' is the end address of the task's
shadow call stack.  Here should be '__scs_magic(task_scs(tsk))'.

The user-visible effect of this bug is that when CONFIG_DEBUG_STACK_USAGE
is enabled, the shadow call stack usage checking function
(scs_check_usage) would scan an incorrect memory range.  This could lead
to:

1. **Inaccurate stack usage reporting**: The function would calculate
   wrong usage statistics for the shadow call stack, potentially showing
   incorrect value in kmsg.

2. **Potential kernel crash**: If the value of __scs_magic(tsk)is
   greater than that of __scs_magic(task_scs(tsk)), the for loop may
   access unmapped memory, potentially causing a kernel panic.  However,
   this scenario is unlikely because task_struct is allocated via the slab
   allocator (which typically returns lower addresses), while the shadow
   call stack returned by task_scs(tsk) is allocated via vmalloc(which
   typically returns higher addresses).

However, since this is purely a debugging feature
(CONFIG_DEBUG_STACK_USAGE), normal production systems should be not
unaffected.  The bug only impacts developers and testers who are actively
debugging stack usage with this configuration enabled.

Link: https://lkml.kernel.org/r/20251011082222.12965-1-zhichi.lin@vivo.com
Fixes: 5bbaf9d1fcb9 ("scs: Add support for stack usage debugging")
Signed-off-by: Jiyuan Xie 
Signed-off-by: Zhichi Lin 
Reviewed-by: Sami Tolvanen 
Acked-by: Will Deacon 
Cc: Andrey Konovalov 
Cc: Kees Cook 
Cc: Marco Elver 
Cc: Will Deacon 
Cc: Yee Lee 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

kallsyms: Fix wrong "big" kernel symbol type read from procfs

2026-01-11T14:21:55+00:00

commit f3f9f42232dee596d15491ca3f611d02174db49c upstream.

Currently when the length of a symbol is longer than 0x7f characters,
its type shown in /proc/kallsyms can be incorrect.

I found this issue when reading the code, but it can be reproduced by
following steps:

  1. Define a function which symbol length is 130 characters:

    #define X13(x) x##x##x##x##x##x##x##x##x##x##x##x##x
    static noinline void X13(x123456789)(void)
    {
        printk("hello world\n");
    }

  2. The type in vmlinux is 't':

    $ nm vmlinux | grep x123456
    ffffffff816290f0 t x123456789x123456789x123456789x12[...]

  3. Then boot the kernel, the type shown in /proc/kallsyms becomes 'g'
     instead of the expected 't':

    # cat /proc/kallsyms | grep x123456
    ffffffff816290f0 g x123456789x123456789x123456789x12[...]

The root cause is that, after commit 73bbb94466fd ("kallsyms: support
"big" kernel symbols"), ULEB128 was used to encode symbol name length.
That is, for "big" kernel symbols of which name length is longer than
0x7f characters, the length info is encoded into 2 bytes.

kallsyms_get_symbol_type() expects to read the first char of the
symbol name which indicates the symbol type. However, due to the
"big" symbol case not being handled, the symbol type read from
/proc/kallsyms may be wrong, so handle it properly.

Cc: stable@vger.kernel.org
Fixes: 73bbb94466fd ("kallsyms: support "big" kernel symbols")
Signed-off-by: Zheng Yejian 
Acked-by: Gary Guo 
Link: https://patch.msgid.link/20241011143853.3022643-1-zhengyejian@huaweicloud.com
Signed-off-by: Miguel Ojeda 
Signed-off-by: Greg Kroah-Hartman

livepatch: Match old_sympos 0 and 1 in klp_find_func()

2026-01-11T14:21:43+00:00

[ Upstream commit 139560e8b973402140cafeb68c656c1374bd4c20 ]

When there is only one function of the same name, old_sympos of 0 and 1
are logically identical. Match them in klp_find_func().

This is to avoid a corner case with different toolchain behavior.

In this specific issue, two versions of kpatch-build were used to
build livepatch for the same kernel. One assigns old_sympos == 0 for
unique local functions, the other assigns old_sympos == 1 for unique
local functions. Both versions work fine by themselves. (PS: This
behavior change was introduced in a downstream version of kpatch-build.
This change does not exist in upstream kpatch-build.)

However, during livepatch upgrade (with the replace flag set) from a
patch built with one version of kpatch-build to the same fix built with
the other version of kpatch-build, livepatching fails with errors like:

[   14.218706] sysfs: cannot create duplicate filename 'xxx/somefunc,1'
...
[   14.219466] Call Trace:
[   14.219468]  
[   14.219469]  dump_stack_lvl+0x47/0x60
[   14.219474]  sysfs_warn_dup.cold+0x17/0x27
[   14.219476]  sysfs_create_dir_ns+0x95/0xb0
[   14.219479]  kobject_add_internal+0x9e/0x260
[   14.219483]  kobject_add+0x68/0x80
[   14.219485]  ? kstrdup+0x3c/0xa0
[   14.219486]  klp_enable_patch+0x320/0x830
[   14.219488]  patch_init+0x443/0x1000 [ccc_0_6]
[   14.219491]  ? 0xffffffffa05eb000
[   14.219492]  do_one_initcall+0x2e/0x190
[   14.219494]  do_init_module+0x67/0x270
[   14.219496]  init_module_from_file+0x75/0xa0
[   14.219499]  idempotent_init_module+0x15a/0x240
[   14.219501]  __x64_sys_finit_module+0x61/0xc0
[   14.219503]  do_syscall_64+0x5b/0x160
[   14.219505]  entry_SYSCALL_64_after_hwframe+0x4b/0x53
[   14.219507] RIP: 0033:0x7f545a4bd96d
...
[   14.219516] kobject: kobject_add_internal failed for somefunc,1 with
    -EEXIST, don't try to register things with the same name ...

This happens because klp_find_func() thinks somefunc with old_sympos==0
is not the same as somefunc with old_sympos==1, and klp_add_object_nops
adds another xxx/func,1 to the list of functions to patch.

Signed-off-by: Song Liu 
Acked-by: Josh Poimboeuf 
[pmladek@suse.com: Fixed some typos.]
Reviewed-by: Petr Mladek 
Tested-by: Petr Mladek 
Signed-off-by: Petr Mladek 
Signed-off-by: Sasha Levin

sched/fair: Revert max_newidle_lb_cost bump

2026-01-11T14:21:42+00:00

[ Upstream commit d206fbad9328ddb68ebabd7cf7413392acd38081 ]

Many people reported regressions on their database workloads due to:

  155213a2aed4 ("sched/fair: Bump sd->max_newidle_lb_cost when newidle balance fails")

For instance Adam Li reported a 6% regression on SpecJBB.

Conversely this will regress schbench again; on my machine from 2.22
Mrps/s down to 2.04 Mrps/s.

Reported-by: Joseph Salisbury 
Reported-by: Adam Li 
Reported-by: Dietmar Eggemann 
Reported-by: Hazem Mohamed Abuelfotoh 
Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Dietmar Eggemann 
Tested-by: Dietmar Eggemann 
Tested-by: Chris Mason 
Link: https://lkml.kernel.org/r/20250626144017.1510594-2-clm@fb.com
Link: https://lkml.kernel.org/r/006c9df2-b691-47f1-82e6-e233c3f91faf@oracle.com
Link: https://patch.msgid.link/20251107161739.406147760@infradead.org
Signed-off-by: Sasha Levin