Pull CXL (Compute Express Link) updates from Dan Williams:
 "This development cycle extends the subsystem to discover CXL resources
  throughout a CXL/PCIe switch topology and respond to hot add/remove
  events anywhere in that topology.

  This is more foundational infrastructure in preparation for dynamic
  memory region provisioning support. Recall that CXL memory regions, as
  the new "Theory of Operation" section of
  Documentation/driver-api/cxl/memory-devices.rst describes, bring
  storage volume striping semantics to memory.

  The hot add/remove behavior is validated with extensions to the
  cxl_test unit test environment and this test in the cxl-cli test
  suite:

      https://github.com/pmem/ndctl/blob/djbw/for-74/cxl/test/cxl-topology.sh

  Summary:

   - Add a driver for 'struct cxl_memdev' objects responsible for
     CXL.mem operation as distinct from 'cxl_pci' mailbox operations.

     Its primary responsibility is enumerating an endpoint 'struct
     cxl_port' and all the 'struct cxl_port' instances between an
     endpoint and the CXL platform root.

   - Add a driver for 'struct cxl_port' objects responsible for
     enumerating and operating all Host-managed Device Memory (HDM)
     decoder resources between the platform-level CXL memory
     description, all intervening host bridges / switches, and the HDM
     resources in endpoints.

   - Update the cxl_pci driver to validate CXL.mem operation precursors
     to HDM decoder operation like ready-polling, and legacy CXL 1.1
     DVSEC based CXL.mem configuration.

   - Add basic lockdep coverage for usage of device_lock() on CXL
     subsystem objects similar to what exists for LIBNVDIMM. Include a
     compile-time switch for which subsystem to validate at run-time.

   - Update cxl_test to emulate a one level switch topology.

   - Document a "Theory of Operation" for the subsystem.

   - Add 'numa_node' and 'serial' attributes to cxl_memdev sysfs

   - Include miscellaneous fixes for spec / QEMU CXL emulation
     compatibility and static analysis reports"

* tag 'cxl-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (48 commits)
  cxl/core/port: Fix NULL but dereferenced coccicheck error
  cxl/port: Hold port reference until decoder release
  cxl/port: Fix endpoint refcount leak
  cxl/core: Fix cxl_device_lock() class detection
  cxl/core/port: Fix unregister_port() lock assertion
  cxl/regs: Fix size of CXL Capability Header Register
  cxl/core/port: Handle invalid decoders
  cxl/core/port: Fix / relax decoder target enumeration
  tools/testing/cxl: Add a physical_node link
  tools/testing/cxl: Enumerate mock decoders
  tools/testing/cxl: Mock one level of switches
  tools/testing/cxl: Fix root port to host bridge assignment
  tools/testing/cxl: Mock dvsec_ranges()
  cxl/core/port: Add endpoint decoders
  cxl/core: Move target_list out of base decoder attributes
  cxl/mem: Add the cxl_mem driver
  cxl/core/port: Add switch port enumeration
  cxl/memdev: Add numa_node attribute
  cxl/pci: Emit device serial number
  cxl/pci: Implement wait for media active
  ...

Merge more updates from Andrew Morton:
 "Various misc subsystems, before getting into the post-linux-next
  material.

  41 patches.

  Subsystems affected by this patch series: procfs, misc, core-kernel,
  lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump,
  taskstats, panic, kcov, resource, and ubsan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits)
  Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang"
  kernel/resource: fix kfree() of bootmem memory again
  kcov: properly handle subsequent mmap calls
  kcov: split ioctl handling into locked and unlocked parts
  panic: move panic_print before kmsg dumpers
  panic: add option to dump all CPUs backtraces in panic_print
  docs: sysctl/kernel: add missing bit to panic_print
  taskstats: remove unneeded dead assignment
  kasan: no need to unset panic_on_warn in end_report()
  ubsan: no need to unset panic_on_warn in ubsan_epilogue()
  panic: unset panic_on_warn inside panic()
  docs: kdump: add scp example to write out the dump file
  docs: kdump: update description about sysfs file system support
  arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible
  cgroup: use irqsave in cgroup_rstat_flush_locked().
  fat: use pointer to simple type in put_user()
  minix: fix bug when opening a file with O_DIRECT
  ...

Pull networking updates from Jakub Kicinski:
 "The sprinkling of SPI drivers is because we added a new one and Mark
  sent us a SPI driver interface conversion pull request.

  Core
  ----

   - Introduce XDP multi-buffer support, allowing the use of XDP with
     jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

   - Speed up netns dismantling (5x) and lower the memory cost a little.
     Remove unnecessary per-netns sockets. Scope some lists to a netns.
     Cut down RCU syncing. Use batch methods. Allow netdev registration
     to complete out of order.

   - Support distinguishing timestamp types (ingress vs egress) and
     maintaining them across packet scrubbing points (e.g. redirect).

   - Continue the work of annotating packet drop reasons throughout the
     stack.

   - Switch netdev error counters from an atomic to dynamically
     allocated per-CPU counters.

   - Rework a few preempt_disable(), local_irq_save() and busy waiting
     sections problematic on PREEMPT_RT.

   - Extend the ref_tracker to allow catching use-after-free bugs.

  BPF
  ---

   - Introduce "packing allocator" for BPF JIT images. JITed code is
     marked read only, and used to be allocated at page granularity.
     Custom allocator allows for more efficient memory use, lower iTLB
     pressure and prevents identity mapping huge pages from getting
     split.

   - Make use of BTF type annotations (e.g. __user, __percpu) to enforce
     the correct probe read access method, add appropriate helpers.

   - Convert the BPF preload to use light skeleton and drop the
     user-mode-driver dependency.

   - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
     its use as a packet generator.

   - Allow local storage memory to be allocated with GFP_KERNEL if
     called from a hook allowed to sleep.

   - Introduce fprobe (multi kprobe) to speed up mass attachment (arch
     bits to come later).

   - Add unstable conntrack lookup helpers for BPF by using the BPF
     kfunc infra.

   - Allow cgroup BPF progs to return custom errors to user space.

   - Add support for AF_UNIX iterator batching.

   - Allow iterator programs to use sleepable helpers.

   - Support JIT of add, and, or, xor and xchg atomic ops on arm64.

   - Add BTFGen support to bpftool which allows to use CO-RE in kernels
     without BTF info.

   - Large number of libbpf API improvements, cleanups and deprecations.

  Protocols
  ---------

   - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

   - Adjust TSO packet sizes based on min_rtt, allowing very low latency
     links (data centers) to always send full-sized TSO super-frames.

   - Make IPv6 flow label changes (AKA hash rethink) more configurable,
     via sysctl and setsockopt. Distinguish between server and client
     behavior.

   - VxLAN support to "collect metadata" devices to terminate only
     configured VNIs. This is similar to VLAN filtering in the bridge.

   - Support inserting IPv6 IOAM information to a fraction of frames.

   - Add protocol attribute to IP addresses to allow identifying where
     given address comes from (kernel-generated, DHCP etc.)

   - Support setting socket and IPv6 options via cmsg on ping6 sockets.

   - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
     Define dscp_t and stop taking ECN bits into account in fib-rules.

   - Add support for locked bridge ports (for 802.1X).

   - tun: support NAPI for packets received from batched XDP buffs,
     doubling the performance in some scenarios.

   - IPv6 extension header handling in Open vSwitch.

   - Support IPv6 control message load balancing in bonding, prevent
     neighbor solicitation and advertisement from using the wrong port.
     Support NS/NA monitor selection similar to existing ARP monitor.

   - SMC
      - improve performance with TCP_CORK and sendfile()
      - support auto-corking
      - support TCP_NODELAY

   - MCTP (Management Component Transport Protocol)
      - add user space tag control interface
      - I2C binding driver (as specified by DMTF DSP0237)

   - Multi-BSSID beacon handling in AP mode for WiFi.

   - Bluetooth:
      - handle MSFT Monitor Device Event
      - add MGMT Adv Monitor Device Found/Lost events

   - Multi-Path TCP:
      - add support for the SO_SNDTIMEO socket option
      - lots of selftest cleanups and improvements

   - Increase the max PDU size in CAN ISOTP to 64 kB.

  Driver API
  ----------

   - Add HW counters for SW netdevs, a mechanism for devices which
     offload packet forwarding to report packet statistics back to
     software interfaces such as tunnels.

   - Select the default NIC queue count as a fraction of number of
     physical CPU cores, instead of hard-coding to 8.

   - Expose devlink instance locks to drivers. Allow device layer of
     drivers to use that lock directly instead of creating their own
     which always runs into ordering issues in devlink callbacks.

   - Add header/data split indication to guide user space enabling of
     TCP zero-copy Rx.

   - Allow configuring completion queue event size.

   - Refactor page_pool to enable fragmenting after allocation.

   - Add allocation and page reuse statistics to page_pool.

   - Improve Multiple Spanning Trees support in the bridge to allow
     reuse of topologies across VLANs, saving HW resources in switches.

   - DSA (Distributed Switch Architecture):
      - replay and offload of host VLAN entries
      - offload of static and local FDB entries on LAG interfaces
      - FDB isolation and unicast filtering

  New hardware / drivers
  ----------------------

   - Ethernet:
      - LAN937x T1 PHYs
      - Davicom DM9051 SPI NIC driver
      - Realtek RTL8367S, RTL8367RB-VB switch and MDIO
      - Microchip ksz8563 switches
      - Netronome NFP3800 SmartNICs
      - Fungible SmartNICs
      - MediaTek MT8195 switches

   - WiFi:
      - mt76: MediaTek mt7916
      - mt76: MediaTek mt7921u USB adapters
      - brcmfmac: Broadcom BCM43454/6

   - Mobile:
      - iosm: Intel M.2 7360 WWAN card

  Drivers
  -------

   - Convert many drivers to the new phylink API built for split PCS
     designs but also simplifying other cases.

   - Intel Ethernet NICs:
      - add TTY for GNSS module for E810T device
      - improve AF_XDP performance
      - GTP-C and GTP-U filter offload
      - QinQ VLAN support

   - Mellanox Ethernet NICs (mlx5):
      - support xdp->data_meta
      - multi-buffer XDP
      - offload tc push_eth and pop_eth actions

   - Netronome Ethernet NICs (nfp):
      - flow-independent tc action hardware offload (police / meter)
      - AF_XDP

   - Other Ethernet NICs:
      - at803x: fiber and SFP support
      - xgmac: mdio: preamble suppression and custom MDC frequencies
      - r8169: enable ASPM L1.2 if system vendor flags it as safe
      - macb/gem: ZynqMP SGMII
      - hns3: add TX push mode
      - dpaa2-eth: software TSO
      - lan743x: multi-queue, mdio, SGMII, PTP
      - axienet: NAPI and GRO support

   - Mellanox Ethernet switches (mlxsw):
      - source and dest IP address rewrites
      - RJ45 ports

   - Marvell Ethernet switches (prestera):
      - basic routing offload
      - multi-chain TC ACL offload

   - NXP embedded Ethernet switches (ocelot & felix):
      - PTP over UDP with the ocelot-8021q DSA tagging protocol
      - basic QoS classification on Felix DSA switch using dcbnl
      - port mirroring for ocelot switches

   - Microchip high-speed industrial Ethernet (sparx5):
      - offloading of bridge port flooding flags
      - PTP Hardware Clock

   - Other embedded switches:
      - lan966x: PTP Hardward Clock
      - qca8k: mdio read/write operations via crafted Ethernet packets

   - Qualcomm 802.11ax WiFi (ath11k):
      - add LDPC FEC type and 802.11ax High Efficiency data in radiotap
      - enable RX PPDU stats in monitor co-exist mode

   - Intel WiFi (iwlwifi):
      - UHB TAS enablement via BIOS
      - band disablement via BIOS
      - channel switch offload
      - 32 Rx AMPDU sessions in newer devices

   - MediaTek WiFi (mt76):
      - background radar detection
      - thermal management improvements on mt7915
      - SAR support for more mt76 platforms
      - MBSSID and 6 GHz band on mt7915

   - RealTek WiFi:
      - rtw89: AP mode
      - rtw89: 160 MHz channels and 6 GHz band
      - rtw89: hardware scan

   - Bluetooth:
      - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

   - Microchip CAN (mcp251xfd):
      - multiple RX-FIFOs and runtime configurable RX/TX rings
      - internal PLL, runtime PM handling simplification
      - improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
  llc: fix netdevice reference leaks in llc_ui_bind()
  drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
  ice: don't allow to run ice_send_event_to_aux() in atomic ctx
  ice: fix 'scheduling while atomic' on aux critical err interrupt
  net/sched: fix incorrect vlan_push_eth dest field
  net: bridge: mst: Restrict info size queries to bridge ports
  net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
  drivers: net: xgene: Fix regression in CRC stripping
  net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
  net: dsa: fix missing host-filtered multicast addresses
  net/mlx5e: Fix build warning, detected write beyond size of field
  iwlwifi: mvm: Don't fail if PPAG isn't supported
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  netdevice: add missing dm_private kdoc
  net: bridge: mst: prevent NULL deref in br_mst_info_size()
  selftests: forwarding: Use same VRF for port and VLAN upper
  ...

0Day robots reported there is compiling issue for 'csky' ARCH when
CONFIG_DEBUG_FORCE_DATA_SECTION_ALIGNED is enabled [1]:

All errors (new ones prefixed by >>):

   {standard input}: Assembler messages:
>> {standard input}:2277: Error: pcrel offset for branch to .LS000B too far (0x3c)

Which was discussed in [2].  And as there is no solution for csky yet, add
some dependency for this config to limit it to several ARCHs which have no
compiling issue so far.

[1]. https://lore.kernel.org/lkml/202202271612.W32UJAj2-lkp@intel.com/
[2]. https://www.spinics.net/lists/linux-kbuild/msg30298.html

Link: https://lkml.kernel.org/r/20220304021100.GN4548@shbuild999.sh.intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Guo Ren <guoren@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently it's not possible to enable DEBUG_INFO for an all*config
build, since it is marked as "depends on !COMPILE_TEST".

This generally makes sense because a debug build of an all*config target
ends up taking much longer and the output is much larger.  Having this
be "default off" makes sense.

However, there are cases where enabling DEBUG_INFO for such builds is
useful for doing treewide A/B comparisons of build options, etc.

Make DEBUG_INFO selectable from any of the DWARF version choice options,
with DEBUG_INFO_NONE being the default for COMPILE_TEST.

The mutually exclusive relationship between DWARF5 and BTF must be
inverted, but the result remains the same.  Additionally moves
DEBUG_KERNEL and DEBUG_MISC up to the top of the menu because they were
enabling features _above_ it, making it weird to navigate menuconfig.

[keescook@chromium.org: make DEBUG_INFO always default=n]
  Link: https://lkml.kernel.org/r/20220128214131.580131-1-keescook@chromium.org
  Link: https://lore.kernel.org/lkml/YfRY6+CaQxX7O8vF@dev-arch.archlinux-ax161

Link: https://lkml.kernel.org/r/20220125075126.891825-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Convert stackinit unit tests to KUnit, for better integration
into the kernel self test framework. Includes a rename of
test_stackinit.c to stackinit_kunit.c, and CONFIG_TEST_STACKINIT to
CONFIG_STACKINIT_KUNIT_TEST.

Adjust expected test results based on which stack initialization method
was chosen:

 $ CMD="./tools/testing/kunit/kunit.py run stackinit --raw_output \
        --arch=x86_64 --kconfig_add"

 $ $CMD | grep stackinit:
 # stackinit: pass:36 fail:0 skip:29 total:65

 $ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_USER=y | grep stackinit:
 # stackinit: pass:37 fail:0 skip:28 total:65

 $ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF=y | grep stackinit:
 # stackinit: pass:55 fail:0 skip:10 total:65

 $ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y | grep stackinit:
 # stackinit: pass:62 fail:0 skip:3 total:65

 $ $CMD CONFIG_INIT_STACK_ALL_PATTERN=y --make_option LLVM=1 | grep stackinit:
 # stackinit: pass:60 fail:0 skip:5 total:65

 $ $CMD CONFIG_INIT_STACK_ALL_ZERO=y --make_option LLVM=1 | grep stackinit:
 # stackinit: pass:60 fail:0 skip:5 total:65

Temporarily remove the userspace-build mode, which will be restored in a
later patch.

Expand the size of the pre-case switch variable so it doesn't get
accidentally cleared.

Cc: David Gow <davidgow@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
v1: https://lore.kernel.org/lkml/20220224055145.1853657-1-keescook@chromium.org
v2:
 - split "userspace KUnit stub" into separate header and patch (Daniel)
 - Improve commit log and comments (David)
 - Provide mapping of expected XFAIL tests to CONFIGs (David)

Add a KUnit based selftest for fprobe interface.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735295554.1084943.18347620679928750960.stgit@devnote2

BTF mismatch can occur for a separately-built module even when the ABI is
otherwise compatible and nothing else would prevent successfully loading.

Add a new Kconfig to control how mismatches are handled. By default, preserve
the current behavior of refusing to load the module. If MODULE_ALLOW_BTF_MISMATCH
is enabled, load the module but ignore its BTF information.

Suggested-by: Yonghong Song <yhs@fb.com>
Suggested-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/CAADnVQJ+OVPnBz8z3vNu8gKXX42jCUqfuvhWAyCQDu8N_yqqwQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20220223012814.1898677-1-connoro@google.com

Convert overflow unit tests to KUnit, for better integration into the
kernel self test framework. Includes a rename of test_overflow.c to
overflow_kunit.c, and CONFIG_TEST_OVERFLOW to CONFIG_OVERFLOW_KUNIT_TEST.

$ ./tools/testing/kunit/kunit.py run overflow
...
[14:33:51] Starting KUnit Kernel (1/1)...
[14:33:51] ============================================================
[14:33:51] ================== overflow (11 subtests) ==================
[14:33:51] [PASSED] u8_overflow_test
[14:33:51] [PASSED] s8_overflow_test
[14:33:51] [PASSED] u16_overflow_test
[14:33:51] [PASSED] s16_overflow_test
[14:33:51] [PASSED] u32_overflow_test
[14:33:51] [PASSED] s32_overflow_test
[14:33:51] [PASSED] u64_overflow_test
[14:33:51] [PASSED] s64_overflow_test
[14:33:51] [PASSED] overflow_shift_test
[14:33:51] [PASSED] overflow_allocation_test
[14:33:51] [PASSED] overflow_size_helpers_test
[14:33:51] ==================== [PASSED] overflow =====================
[14:33:51] ============================================================
[14:33:51] Testing complete. Passed: 11, Failed: 0, Crashed: 0, Skipped: 0, Errors: 0
[14:33:51] Elapsed time: 12.525s total, 0.001s configuring, 12.402s building, 0.101s running

Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Co-developed-by: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Link: https://lore.kernel.org/lkml/20200720224418.200495-1-vitor@massaru.org/
Co-developed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Link: https://lore.kernel.org/linux-kselftest/20210503211536.1384578-1-dlatypov@google.com/
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/lkml/CAKwvOdm62iA1dNiC6Q11UJ-MnTqtc4kXkm-ubPaFMK824_k0nw@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/lkml/CABVgOS=TWVh649_Vjo3wnMu9gZnq66gkV-LtGgsksAWMqc+MSA@mail.gmail.com

When CONFIG_PROVE_LOCKING is enabled the 'struct device' definition gets
an additional mutex that is not clobbered by
lockdep_set_novalidate_class() like the typical device_lock(). This
allows for local annotation of subsystem locks with mutex_lock_nested()
per the subsystem's object/lock hierarchy. For CXL, this primarily needs
the ability to lock ports by depth and child objects of ports by their
parent parent-port lock.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/164365853422.99383.1052399160445197427.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>