linux.git/mm, branch v5.4.64

mm/khugepaged.c: fix khugepaged's request size in collapse_file

2020-09-09T17:12:37+00:00

commit e5a59d308f52bb0052af5790c22173651b187465 upstream.

collapse_file() in khugepaged passes PAGE_SIZE as the number of pages to
be read to page_cache_sync_readahead().  The intent was probably to read
a single page.  Fix it to use the number of pages to the end of the
window instead.

Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: David Howells 
Signed-off-by: Matthew Wilcox (Oracle) 
Signed-off-by: Andrew Morton 
Reviewed-by: Matthew Wilcox (Oracle) 
Acked-by: Song Liu 
Acked-by: Yang Shi 
Acked-by: Pankaj Gupta 
Cc: Eric Biggers 
Link: https://lkml.kernel.org/r/20200903140844.14194-2-willy@infradead.org
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm/hugetlb: fix a race between hugetlb sysctl handlers

2020-09-09T17:12:37+00:00

commit 17743798d81238ab13050e8e2833699b54e15467 upstream.

There is a race between the assignment of `table->data` and write value
to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on
the other thread.

  CPU0:                                 CPU1:
                                        proc_sys_write
  hugetlb_sysctl_handler                  proc_sys_call_handler
  hugetlb_sysctl_handler_common             hugetlb_sysctl_handler
    table->data = &tmp;                       hugetlb_sysctl_handler_common
                                                table->data = &tmp;
      proc_doulongvec_minmax
        do_proc_doulongvec_minmax           sysctl_head_finish
          __do_proc_doulongvec_minmax         unuse_table
            i = table->data;
            *i = val;  // corrupt CPU1's stack

Fix this by duplicating the `table`, and only update the duplicate of
it.  And introduce a helper of proc_hugetlb_doulongvec_minmax() to
simplify the code.

The following oops was seen:

    BUG: kernel NULL pointer dereference, address: 0000000000000000
    #PF: supervisor instruction fetch in kernel mode
    #PF: error_code(0x0010) - not-present page
    Code: Bad RIP value.
    ...
    Call Trace:
     ? set_max_huge_pages+0x3da/0x4f0
     ? alloc_pool_huge_page+0x150/0x150
     ? proc_doulongvec_minmax+0x46/0x60
     ? hugetlb_sysctl_handler_common+0x1c7/0x200
     ? nr_hugepages_store+0x20/0x20
     ? copy_fd_bitmaps+0x170/0x170
     ? hugetlb_sysctl_handler+0x1e/0x20
     ? proc_sys_call_handler+0x2f1/0x300
     ? unregister_sysctl_table+0xb0/0xb0
     ? __fd_install+0x78/0x100
     ? proc_sys_write+0x14/0x20
     ? __vfs_write+0x4d/0x90
     ? vfs_write+0xef/0x240
     ? ksys_write+0xc0/0x160
     ? __ia32_sys_read+0x50/0x50
     ? __close_fd+0x129/0x150
     ? __x64_sys_write+0x43/0x50
     ? do_syscall_64+0x6c/0x200
     ? entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: e5ff215941d5 ("hugetlb: multiple hstates for multiple page sizes")
Signed-off-by: Muchun Song 
Signed-off-by: Andrew Morton 
Reviewed-by: Mike Kravetz 
Cc: Andi Kleen 
Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: madvise: fix vma user-after-free

2020-09-09T17:12:36+00:00

commit 7867fd7cc44e63c6673cd0f8fea155456d34d0de upstream.

The syzbot reported the below use-after-free:

  BUG: KASAN: use-after-free in madvise_willneed mm/madvise.c:293 [inline]
  BUG: KASAN: use-after-free in madvise_vma mm/madvise.c:942 [inline]
  BUG: KASAN: use-after-free in do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145
  Read of size 8 at addr ffff8880a6163eb0 by task syz-executor.0/9996

  CPU: 0 PID: 9996 Comm: syz-executor.0 Not tainted 5.9.0-rc1-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x18f/0x20d lib/dump_stack.c:118
    print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383
    __kasan_report mm/kasan/report.c:513 [inline]
    kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
    madvise_willneed mm/madvise.c:293 [inline]
    madvise_vma mm/madvise.c:942 [inline]
    do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145
    do_madvise mm/madvise.c:1169 [inline]
    __do_sys_madvise mm/madvise.c:1171 [inline]
    __se_sys_madvise mm/madvise.c:1169 [inline]
    __x64_sys_madvise+0xd9/0x110 mm/madvise.c:1169
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Allocated by task 9992:
    kmem_cache_alloc+0x138/0x3a0 mm/slab.c:3482
    vm_area_alloc+0x1c/0x110 kernel/fork.c:347
    mmap_region+0x8e5/0x1780 mm/mmap.c:1743
    do_mmap+0xcf9/0x11d0 mm/mmap.c:1545
    vm_mmap_pgoff+0x195/0x200 mm/util.c:506
    ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Freed by task 9992:
    kmem_cache_free.part.0+0x67/0x1f0 mm/slab.c:3693
    remove_vma+0x132/0x170 mm/mmap.c:184
    remove_vma_list mm/mmap.c:2613 [inline]
    __do_munmap+0x743/0x1170 mm/mmap.c:2869
    do_munmap mm/mmap.c:2877 [inline]
    mmap_region+0x257/0x1780 mm/mmap.c:1716
    do_mmap+0xcf9/0x11d0 mm/mmap.c:1545
    vm_mmap_pgoff+0x195/0x200 mm/util.c:506
    ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

It is because vma is accessed after releasing mmap_lock, but someone
else acquired the mmap_lock and the vma is gone.

Releasing mmap_lock after accessing vma should fix the problem.

Fixes: 692fe62433d4c ("mm: Handle MADV_WILLNEED through vfs_fadvise()")
Reported-by: syzbot+b90df26038d1d5d85c97@syzkaller.appspotmail.com
Signed-off-by: Yang Shi 
Signed-off-by: Andrew Morton 
Reviewed-by: Andrew Morton 
Reviewed-by: Jan Kara 
Cc: 	[5.4+]
Link: https://lkml.kernel.org/r/20200816141204.162624-1-shy828301@gmail.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: slub: fix conversion of freelist_corrupted()

2020-09-09T17:12:36+00:00

commit dc07a728d49cf025f5da2c31add438d839d076c0 upstream.

Commit 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in
deactivate_slab()") suffered an update when picked up from LKML [1].

Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()'
created a no-op statement.  Fix it by sticking to the behavior intended
in the original patch [1].  In addition, make freelist_corrupted()
immune to passing NULL instead of &freelist.

The issue has been spotted via static analysis and code review.

[1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/

Fixes: 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()")
Signed-off-by: Eugeniu Rosca 
Signed-off-by: Andrew Morton 
Cc: Dongli Zhang 
Cc: Joe Jin 
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: David Rientjes 
Cc: Joonsoo Kim 
Cc: 
Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm/vunmap: add cond_resched() in vunmap_pmd_range

2020-09-03T09:26:52+00:00

[ Upstream commit e47110e90584a22e9980510b00d0dfad3a83354e ]

Like zap_pte_range add cond_resched so that we can avoid softlockups as
reported below.  On non-preemptible kernel with large I/O map region (like
the one we get when using persistent memory with sector mode), an unmap of
the namespace can report below softlockups.

22724.027334] watchdog: BUG: soft lockup - CPU#49 stuck for 23s! [ndctl:50777]
 NIP [c0000000000dc224] plpar_hcall+0x38/0x58
 LR [c0000000000d8898] pSeries_lpar_hpte_invalidate+0x68/0xb0
 Call Trace:
    flush_hash_page+0x114/0x200
    hpte_need_flush+0x2dc/0x540
    vunmap_page_range+0x538/0x6f0
    free_unmap_vmap_area+0x30/0x70
    remove_vm_area+0xfc/0x140
    __vunmap+0x68/0x270
    __iounmap.part.0+0x34/0x60
    memunmap+0x54/0x70
    release_nodes+0x28c/0x300
    device_release_driver_internal+0x16c/0x280
    unbind_store+0x124/0x170
    drv_attr_store+0x44/0x60
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1b0/0x290
    __vfs_write+0x3c/0x70
    vfs_write+0xd8/0x260
    ksys_write+0xdc/0x130
    system_call+0x5c/0x70

Reported-by: Harish Sriram 
Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Andrew Morton 
Reviewed-by: Andrew Morton 
Cc: 
Link: http://lkml.kernel.org/r/20200807075933.310240-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

cma: don't quit at first error when activating reserved areas

2020-09-03T09:26:51+00:00

[ Upstream commit 3a5139f1c5bb76d69756fb8f13fffa173e261153 ]

The routine cma_init_reserved_areas is designed to activate all
reserved cma areas.  It quits when it first encounters an error.
This can leave some areas in a state where they are reserved but
not activated.  There is no feedback to code which performed the
reservation.  Attempting to allocate memory from areas in such a
state will result in a BUG.

Modify cma_init_reserved_areas to always attempt to activate all
areas.  The called routine, cma_activate_area is responsible for
leaving the area in a valid state.  No one is making active use
of returned error codes, so change the routine to void.

How to reproduce:  This example uses kernelcore, hugetlb and cma
as an easy way to reproduce.  However, this is a more general cma
issue.

Two node x86 VM 16GB total, 8GB per node
Kernel command line parameters, kernelcore=4G hugetlb_cma=8G
Related boot time messages,
  hugetlb_cma: reserve 8192 MiB, up to 4096 MiB per node
  cma: Reserved 4096 MiB at 0x0000000100000000
  hugetlb_cma: reserved 4096 MiB on node 0
  cma: Reserved 4096 MiB at 0x0000000300000000
  hugetlb_cma: reserved 4096 MiB on node 1
  cma: CMA area hugetlb could not be activated

 # echo 8 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  ...
  Call Trace:
    bitmap_find_next_zero_area_off+0x51/0x90
    cma_alloc+0x1a5/0x310
    alloc_fresh_huge_page+0x78/0x1a0
    alloc_pool_huge_page+0x6f/0xf0
    set_max_huge_pages+0x10c/0x250
    nr_hugepages_store_common+0x92/0x120
    ? __kmalloc+0x171/0x270
    kernfs_fop_write+0xc1/0x1a0
    vfs_write+0xc7/0x1f0
    ksys_write+0x5f/0xe0
    do_syscall_64+0x4d/0x90
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c64be2bb1c6e ("drivers: add Contiguous Memory Allocator")
Signed-off-by: Mike Kravetz 
Signed-off-by: Andrew Morton 
Reviewed-by: Roman Gushchin 
Acked-by: Barry Song 
Cc: Marek Szyprowski 
Cc: Michal Nazarewicz 
Cc: Kyungmin Park 
Cc: Joonsoo Kim 
Cc: 
Link: http://lkml.kernel.org/r/20200730163123.6451-1-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

mm/cma.c: switch to bitmap_zalloc() for cma bitmap allocation

2020-09-03T09:26:51+00:00

[ Upstream commit 2184f9928ab52f26c2ae5e9ba37faf29c78f50b8 ]

kzalloc() is used for cma bitmap allocation in cma_activate_area(),
switch to bitmap_zalloc() for clarity.

Link: http://lkml.kernel.org/r/895d4627-f115-c77a-d454-c0a196116426@huawei.com
Signed-off-by: Yunfeng Ye 
Reviewed-by: Andrew Morton 
Cc: Mike Rapoport 
Cc: Yue Hu 
Cc: Peng Fan 
Cc: Andrey Ryabinin 
Cc: Ryohei Suzuki 
Cc: Andrey Konovalov 
Cc: Doug Berger 
Cc: Thomas Gleixner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

mm: fix kthread_use_mm() vs TLB invalidate

2020-09-03T09:26:51+00:00

[ Upstream commit 38cf307c1f2011d413750c5acb725456f47d9172 ]

For SMP systems using IPI based TLB invalidation, looking at
current->active_mm is entirely reasonable.  This then presents the
following race condition:

  CPU0			CPU1

  flush_tlb_mm(mm)	use_mm(mm)
    
			  tsk->active_mm = mm;
			  
			    if (tsk->active_mm == mm)
			      // flush TLBs
			  
			  switch_mm(old_mm,mm,tsk);

Where it is possible the IPI flushed the TLBs for @old_mm, not @mm,
because the IPI lands before we actually switched.

Avoid this by disabling IRQs across changing ->active_mm and
switch_mm().

Of the (SMP) architectures that have IPI based TLB invalidate:

  Alpha    - checks active_mm
  ARC      - ASID specific
  IA64     - checks active_mm
  MIPS     - ASID specific flush
  OpenRISC - shoots down world
  PARISC   - shoots down world
  SH       - ASID specific
  SPARC    - ASID specific
  x86      - N/A
  xtensa   - checks active_mm

So at the very least Alpha, IA64 and Xtensa are suspect.

On top of this, for scheduler consistency we need at least preemption
disabled across changing tsk->mm and doing switch_mm(), which is
currently provided by task_lock(), but that's not sufficient for
PREEMPT_RT.

[akpm@linux-foundation.org: add comment]

Reported-by: Andy Lutomirski 
Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Andrew Morton 
Cc: Nicholas Piggin 
Cc: Jens Axboe 
Cc: Kees Cook 
Cc: Jann Horn 
Cc: Will Deacon 
Cc: Christoph Hellwig 
Cc: Mathieu Desnoyers 
Cc: 
Link: http://lkml.kernel.org/r/20200721154106.GE10769@hirez.programming.kicks-ass.net
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

mm/shuffle: don't move pages between zones and don't read garbage memmaps

2020-09-03T09:26:51+00:00

[ Upstream commit 4a93025cbe4a0b19d1a25a2d763a3d2018bad0d9 ]

Especially with memory hotplug, we can have offline sections (with a
garbage memmap) and overlapping zones.  We have to make sure to only touch
initialized memmaps (online sections managed by the buddy) and that the
zone matches, to not move pages between zones.

To test if this can actually happen, I added a simple

	BUG_ON(page_zone(page_i) != page_zone(page_j));

right before the swap.  When hotplugging a 256M DIMM to a 4G x86-64 VM and
onlining the first memory block "online_movable" and the second memory
block "online_kernel", it will trigger the BUG, as both zones (NORMAL and
MOVABLE) overlap.

This might result in all kinds of weird situations (e.g., double
allocations, list corruptions, unmovable allocations ending up in the
movable zone).

Fixes: e900a918b098 ("mm: shuffle initial free memory to improve memory-side-cache utilization")
Signed-off-by: David Hildenbrand 
Signed-off-by: Andrew Morton 
Reviewed-by: Wei Yang 
Acked-by: Michal Hocko 
Acked-by: Dan Williams 
Cc: Andrew Morton 
Cc: Johannes Weiner 
Cc: Michal Hocko 
Cc: Minchan Kim 
Cc: Huang Ying 
Cc: Wei Yang 
Cc: Mel Gorman 
Cc: 	[5.2+]
Link: http://lkml.kernel.org/r/20200624094741.9918-2-david@redhat.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible

2020-08-26T08:41:07+00:00

commit 75802ca66354a39ab8e35822747cd08b3384a99a upstream.

This is found by code observation only.

Firstly, the worst case scenario should assume the whole range was covered
by pmd sharing.  The old algorithm might not work as expected for ranges
like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the
expected range should be (0, 2g).

Since at it, remove the loop since it should not be required.  With that,
the new code should be faster too when the invalidating range is huge.

Mike said:

: With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only
: adjust to (0, 1g+2m) which is incorrect.
:
: We should cc stable.  The original reason for adjusting the range was to
: prevent data corruption (getting wrong page).  Since the range is not
: always adjusted correctly, the potential for corruption still exists.
:
: However, I am fairly confident that adjust_range_if_pmd_sharing_possible
: is only gong to be called in two cases:
:
: 1) for a single page
: 2) for range == entire vma
:
: In those cases, the current code should produce the correct results.
:
: To be safe, let's just cc stable.

Fixes: 017b1660df89 ("mm: migration: fix migration of huge PMD shared pages")
Signed-off-by: Peter Xu 
Signed-off-by: Andrew Morton 
Reviewed-by: Mike Kravetz 
Cc: Andrea Arcangeli 
Cc: Matthew Wilcox 
Cc: 
Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Mike Kravetz 
Signed-off-by: Greg Kroah-Hartman