[ Upstream commit 31d49ba033095f6e8158c60f69714a500922e0c3 ]

The dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN],
which is introduced in commit 859ee3c43812 ("DCB: Add support for DCB
BCN"). Please see the comment in below code

static int dcbnl_bcn_setcfg(...)
{
  ...
  ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. )
  // !!! dcbnl_pfc_up_nest for attributes
  //  DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ALL in enum dcbnl_pfc_up_attrs
  ...
  for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) {
  // !!! DCB_BCN_ATTR_RP_0 to DCB_BCN_ATTR_RP_7 in enum dcbnl_bcn_attrs
    ...
    value_byte = nla_get_u8(data[i]);
    ...
  }
  ...
  for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) {
  // !!! DCB_BCN_ATTR_BCNA_0 to DCB_BCN_ATTR_RI in enum dcbnl_bcn_attrs
  ...
    value_int = nla_get_u32(data[i]);
  ...
  }
  ...
}

That is, the nla_parse_nested_deprecated uses dcbnl_pfc_up_nest
attributes to parse nlattr defined in dcbnl_pfc_up_attrs. But the
following access code fetch each nlattr as dcbnl_bcn_attrs attributes.
By looking up the associated nla_policy for dcbnl_bcn_attrs. We can find
the beginning part of these two policies are "same".

static const struct nla_policy dcbnl_pfc_up_nest[...] = {
        [DCB_PFC_UP_ATTR_0]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_1]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_2]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_3]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_4]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_5]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_6]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_7]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG},
};

static const struct nla_policy dcbnl_bcn_nest[...] = {
        [DCB_BCN_ATTR_RP_0]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_1]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_2]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_3]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_4]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_5]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_6]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_7]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_ALL]       = {.type = NLA_FLAG},
        // from here is somewhat different
        [DCB_BCN_ATTR_BCNA_0]       = {.type = NLA_U32},
        ...
        [DCB_BCN_ATTR_ALL]          = {.type = NLA_FLAG},
};

Therefore, the current code is buggy and this
nla_parse_nested_deprecated could overflow the dcbnl_pfc_up_nest and use
the adjacent nla_policy to parse attributes from DCB_BCN_ATTR_BCNA_0.

Hence use the correct policy dcbnl_bcn_nest to parse the nested
tb[DCB_ATTR_BCN] TLV.

Fixes: 859ee3c43812 ("DCB: Add support for DCB BCN")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801013248.87240-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Ido Schimmel points out that since commit 52cff74eef5d ("dcbnl : Disable
software interrupts before taking dcb_lock"), the DCB API can be called
by drivers from softirq context.

One such in-tree example is the chelsio cxgb4 driver:
dcb_rpl
-> cxgb4_dcb_handle_fw_update
   -> dcb_ieee_setapp

If the firmware for this driver happened to send an event which resulted
in a call to dcb_ieee_setapp() at the exact same time as another
DCB-enabled interface was unregistering on the same CPU, the softirq
would deadlock, because the interrupted process was already holding the
dcb_lock in dcbnl_flush_dev().

Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as
in the rest of the dcbnl code.

Fixes: 91b0383fef06 ("net: dcb: flush lingering app table entries for unregistered devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220302193939.1368823-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If I'm not mistaken (and I don't think I am), the way in which the
dcbnl_ops work is that drivers call dcb_ieee_setapp() and this populates
the application table with dynamically allocated struct dcb_app_type
entries that are kept in the module-global dcb_app_list.

However, nobody keeps exact track of these entries, and although
dcb_ieee_delapp() is supposed to remove them, nobody does so when the
interface goes away (example: driver unbinds from device). So the
dcb_app_list will contain lingering entries with an ifindex that no
longer matches any device in dcb_app_lookup().

Reclaim the lost memory by listening for the NETDEV_UNREGISTER event and
flushing the app table entries of interfaces that are now gone.

In fact something like this used to be done as part of the initial
commit (blamed below), but it was done in dcbnl_exit() -> dcb_flushapp(),
essentially at module_exit time. That became dead code after commit
7a6b6f515f77 ("DCB: fix kconfig option") which essentially merged
"tristate config DCB" and "bool config DCBNL" into a single "bool config
DCB", so net/dcb/dcbnl.c could not be built as a module anymore.

Commit 36b9ad8084bd ("net/dcb: make dcbnl.c explicitly non-modular")
recognized this and deleted dcbnl_exit() and dcb_flushapp() altogether,
leaving us with the version we have today.

Since flushing application table entries can and should be done as soon
as the netdevice disappears, fundamentally the commit that is to blame
is the one that introduced the design of this API.

Fixes: 9ab933ab2cc8 ("dcbnl: add appliction tlv handlers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The list_head dcb_app_list is initialized statically.
It is unnecessary to initialize by INIT_LIST_HEAD().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CONFIG_DCB is a bool option. Change the ifeq conditional to the
standard obj-$(CONFIG_DCB) form.

Use obj-y in net/dcb/Makefile because Kbuild visits this Makefile
only when CONFIG_DCB=y.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125231659.106201-2-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In commit 826f328e2b7e ("net: dcb: Validate netlink message in DCB
handler"), Linux started rejecting RTM_GETDCB netlink messages if they
contained a set-like DCB_CMD_ command.

The reason was that privileges were only verified for RTM_SETDCB messages,
but the value that determined the action to be taken is the command, not
the message type. And validation of message type against the DCB command
was the obvious missing piece.

Unfortunately it turns out that mlnx_qos, a somewhat widely deployed tool
for configuration of DCB, accesses the DCB set-like APIs through
RTM_GETDCB.

Therefore do not bounce the discrepancy between message type and command.
Instead, in addition to validating privileges based on the actual message
type, validate them also based on the expected message type. This closes
the loophole of allowing DCB configuration on non-admin accounts, while
maintaining backward compatibility.

Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver")
Fixes: 826f328e2b7e ("net: dcb: Validate netlink message in DCB handler")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/a3edcfda0825f2aa2591801c5232f2bbf2d8a554.1610384801.git.me@pmachata.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

DCB uses the same handler function for both RTM_GETDCB and RTM_SETDCB
messages. dcb_doit() bounces RTM_SETDCB mesasges if the user does not have
the CAP_NET_ADMIN capability.

However, the operation to be performed is not decided from the DCB message
type, but from the DCB command. Thus DCB_CMD_*_GET commands are used for
reading DCB objects, the corresponding SET and DEL commands are used for
manipulation.

The assumption is that set-like commands will be sent via an RTM_SETDCB
message, and get-like ones via RTM_GETDCB. However, this assumption is not
enforced.

It is therefore possible to manipulate DCB objects without CAP_NET_ADMIN
capability by sending the corresponding command in an RTM_GETDCB message.
That is a bug. Fix it by validating the type of the request message against
the type used for the response.

Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver")
Signed-off-by: Petr Machata <me@pmachata.org>
Link: https://lore.kernel.org/r/a2a9b88418f3a58ef211b718f2970128ef9e3793.1608673640.git.me@pmachata.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net//dcb/dcbnl.c:1836: warning: Function parameter or member 'app' not described in 'dcb_getapp'
net//dcb/dcbnl.c:1836: warning: Function parameter or member 'dev' not described in 'dcb_getapp'
net//dcb/dcbnl.c:1858: warning: Function parameter or member 'dev' not described in 'dcb_setapp'
net//dcb/dcbnl.c:1858: warning: Function parameter or member 'new' not described in 'dcb_setapp'
net//dcb/dcbnl.c:1899: warning: Function parameter or member 'app' not described in 'dcb_ieee_getapp_mask'
net//dcb/dcbnl.c:1899: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_mask'
net//dcb/dcbnl.c:1922: warning: Function parameter or member 'dev' not described in 'dcb_ieee_setapp'
net//dcb/dcbnl.c:1922: warning: Function parameter or member 'new' not described in 'dcb_ieee_setapp'
net//dcb/dcbnl.c:1953: warning: Function parameter or member 'del' not described in 'dcb_ieee_delapp'
net//dcb/dcbnl.c:1953: warning: Function parameter or member 'dev' not described in 'dcb_ieee_delapp'
net//dcb/dcbnl.c:1986: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_prio_dscp_mask_map'
net//dcb/dcbnl.c:1986: warning: Function parameter or member 'p_map' not described in 'dcb_ieee_getapp_prio_dscp_mask_map'
net//dcb/dcbnl.c:2016: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_dscp_prio_mask_map'
net//dcb/dcbnl.c:2016: warning: Function parameter or member 'p_map' not described in 'dcb_ieee_getapp_dscp_prio_mask_map'
net//dcb/dcbnl.c:2045: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_default_prio_mask'

For some of these warnings, change to comments to plain comments,
since no attempt is being made to follow kerneldoc syntax.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201028010913.930929-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The
field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where
each value is a number of a buffer to direct that priority's traffic to.
That value is however never validated to lie within the bounds set by
DCBX_MAX_BUFFERS. The only driver that currently implements the callback is
mlx5 (maintainers CCd), and that does not do any validation either, in
particual allowing incorrect configuration if the prio2buffer value does
not fit into 4 bits.

Instead of offloading the need to validate the buffer index to drivers, do
it right there in core, and bounce the request if the value is too large.

CC: Parav Pandit <parav@nvidia.com>
CC: Saeed Mahameed <saeedm@nvidia.com>
Fixes: e549f6f9c098 ("net/dcb: Add dcbnl buffer attribute")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>