linux.git/net/dcb, branch v6.18.21

dcb: Use rtnl_register_many().

2024-10-16T01:52:26+00:00

We will remove rtnl_register() in favour of rtnl_register_many().

When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.

Let's use rtnl_register_many() instead.

Signed-off-by: Kuniyuki Iwashima 
Reviewed-by: Eric Dumazet 
Link: https://patch.msgid.link/20241014201828.91221-10-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski

net: dcb: choose correct policy to parse DCB_ATTR_BCN

2023-08-02T04:07:46+00:00

The dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN],
which is introduced in commit 859ee3c43812 ("DCB: Add support for DCB
BCN"). Please see the comment in below code

static int dcbnl_bcn_setcfg(...)
{
  ...
  ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. )
  // !!! dcbnl_pfc_up_nest for attributes
  //  DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ALL in enum dcbnl_pfc_up_attrs
  ...
  for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) {
  // !!! DCB_BCN_ATTR_RP_0 to DCB_BCN_ATTR_RP_7 in enum dcbnl_bcn_attrs
    ...
    value_byte = nla_get_u8(data[i]);
    ...
  }
  ...
  for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) {
  // !!! DCB_BCN_ATTR_BCNA_0 to DCB_BCN_ATTR_RI in enum dcbnl_bcn_attrs
  ...
    value_int = nla_get_u32(data[i]);
  ...
  }
  ...
}

That is, the nla_parse_nested_deprecated uses dcbnl_pfc_up_nest
attributes to parse nlattr defined in dcbnl_pfc_up_attrs. But the
following access code fetch each nlattr as dcbnl_bcn_attrs attributes.
By looking up the associated nla_policy for dcbnl_bcn_attrs. We can find
the beginning part of these two policies are "same".

static const struct nla_policy dcbnl_pfc_up_nest[...] = {
        [DCB_PFC_UP_ATTR_0]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_1]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_2]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_3]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_4]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_5]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_6]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_7]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG},
};

static const struct nla_policy dcbnl_bcn_nest[...] = {
        [DCB_BCN_ATTR_RP_0]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_1]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_2]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_3]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_4]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_5]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_6]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_7]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_ALL]       = {.type = NLA_FLAG},
        // from here is somewhat different
        [DCB_BCN_ATTR_BCNA_0]       = {.type = NLA_U32},
        ...
        [DCB_BCN_ATTR_ALL]          = {.type = NLA_FLAG},
};

Therefore, the current code is buggy and this
nla_parse_nested_deprecated could overflow the dcbnl_pfc_up_nest and use
the adjacent nla_policy to parse attributes from DCB_BCN_ATTR_BCNA_0.

Hence use the correct policy dcbnl_bcn_nest to parse the nested
tb[DCB_ATTR_BCN] TLV.

Fixes: 859ee3c43812 ("DCB: Add support for DCB BCN")
Signed-off-by: Lin Ma 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20230801013248.87240-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski

net: dcb: add helper functions to retrieve PCP and DSCP rewrite maps

2023-01-20T09:33:22+00:00

Add two new helper functions to retrieve a mapping of priority to PCP
and DSCP bitmasks, where each bitmap contains ones in positions that
match a rewrite entry.

dcb_ieee_getrewr_prio_dscp_mask_map() reuses the dcb_ieee_app_prio_map,
as this struct is already used for a similar mapping in the app table.

Signed-off-by: Daniel Machon 
Reviewed-by: Petr Machata 
Signed-off-by: David S. Miller

net: dcb: add new rewrite table

2023-01-20T09:33:22+00:00

Add new rewrite table and all the required functions, offload hooks and
bookkeeping for maintaining it. The rewrite table reuses the app struct,
and the entire set of app selectors. As such, some bookeeping code can
be shared between the rewrite- and the APP table.

New functions for getting, setting and deleting entries has been added.
Apart from operating on the rewrite list, these functions do not emit a
DCB_APP_EVENT when the list os modified. The new dcb_getrewr does a
lookup based on selector and priority and returns the protocol, so that
mappings from priority to protocol, for a given selector and ifindex is
obtained.

Also, a new nested attribute has been added, that encapsulates one or
more app structs. This attribute is used to distinguish the two tables.

The dcb_lock used for the APP table is reused for the rewrite table.

Signed-off-by: Daniel Machon 
Reviewed-by: Petr Machata 
Signed-off-by: David S. Miller

net: dcb: add new common function for set/del of app/rewr entries

2023-01-20T09:33:22+00:00

In preparation for DCB rewrite. Add a new function for setting and
deleting both app and rewrite entries. Moving this into a separate
function reduces duplicate code, as both type of entries requires the
same set of checks. The function will now iterate through a configurable
nested attribute (app or rewrite attr), validate each attribute and call
the appropriate set- or delete function.

Note that this function always checks for nla_len(attr_itr) <
sizeof(struct dcb_app), which was only done in dcbnl_ieee_set and not in
dcbnl_ieee_del prior to this patch. This means, that any userspace tool
that used to shove in data < sizeof(struct dcb_app) would now receive
-ERANGE.

Signed-off-by: Daniel Machon 
Reviewed-by: Petr Machata 
Signed-off-by: David S. Miller

net: dcb: modify dcb_app_add to take list_head ptr as parameter

2023-01-20T09:33:22+00:00

In preparation to DCB rewrite. Modify dcb_app_add to take new struct
list_head * as parameter, to make the used list configurable. This is
done to allow reusing the function for adding rewrite entries to the
rewrite table, which is introduced in a later patch.

Signed-off-by: Daniel Machon 
Reviewed-by: Petr Machata 
Signed-off-by: David S. Miller

net: dcb: move getapptrust to separate function

2022-11-15T14:27:43+00:00

This patch fixes a frame size warning, reported by kernel test robot.

>> net/dcb/dcbnl.c:1230:1: warning: the frame size of 1244 bytes is
>> larger than 1024 bytes [-Wframe-larger-than=]

The getapptrust part of dcbnl_ieee_fill is moved to a separate function,
and the selector array is now dynamically allocated, instead of stack
allocated.

Tested on microchip sparx5 driver.

Fixes: 6182d5875c33 ("net: dcb: add new apptrust attribute")
Reported-by: kernel test robot 
Signed-off-by: Daniel Machon 
Link: https://lore.kernel.org/r/20221114092950.2490451-1-daniel.machon@microchip.com
Signed-off-by: Paolo Abeni

net: dcb: add new apptrust attribute

2022-11-03T14:16:50+00:00

Add new apptrust extension attributes to the 8021Qaz APP managed object.

Two new attributes, DCB_ATTR_DCB_APP_TRUST_TABLE and
DCB_ATTR_DCB_APP_TRUST, has been added. Trusted selectors are passed in
the nested attribute DCB_ATTR_DCB_APP_TRUST, in order of precedence.

The new attributes are meant to allow drivers, whose hw supports the
notion of trust, to be able to set whether a particular app selector is
trusted - and in which order.

Signed-off-by: Daniel Machon 
Reviewed-by: Petr Machata 
Signed-off-by: Paolo Abeni

net: dcb: add new pcp selector to app object

2022-11-03T14:16:50+00:00

Add new PCP selector for the 8021Qaz APP managed object.

As the PCP selector is not part of the 8021Qaz standard, a new non-std
extension attribute DCB_ATTR_DCB_APP has been introduced. Also two
helper functions to translate between selector and app attribute type
has been added. The new selector has been given a value of 255, to
minimize the risk of future overlap of std- and non-std attributes.

The new DCB_ATTR_DCB_APP is sent alongside the ieee std attribute in the
app table. This means that the dcb_app struct can now both contain std-
and non-std app attributes. Currently there is no overlap between the
selector values of the two attributes.

The purpose of adding the PCP selector, is to be able to offload
PCP-based queue classification to the 8021Q Priority Code Point table,
see 6.9.3 of IEEE Std 802.1Q-2018.

PCP and DEI is encoded in the protocol field as 8*dei+pcp, so that a
mapping of PCP 2 and DEI 1 to priority 3 is encoded as {255, 10, 3}.

Signed-off-by: Daniel Machon 
Reviewed-by: Petr Machata 
Signed-off-by: Paolo Abeni

net: dcb: disable softirqs in dcbnl_flush_dev()

2022-03-03T16:01:55+00:00

Ido Schimmel points out that since commit 52cff74eef5d ("dcbnl : Disable
software interrupts before taking dcb_lock"), the DCB API can be called
by drivers from softirq context.

One such in-tree example is the chelsio cxgb4 driver:
dcb_rpl
-> cxgb4_dcb_handle_fw_update
   -> dcb_ieee_setapp

If the firmware for this driver happened to send an event which resulted
in a call to dcb_ieee_setapp() at the exact same time as another
DCB-enabled interface was unregistering on the same CPU, the softirq
would deadlock, because the interrupted process was already holding the
dcb_lock in dcbnl_flush_dev().

Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as
in the rest of the dcbnl code.

Fixes: 91b0383fef06 ("net: dcb: flush lingering app table entries for unregistered devices")
Reported-by: Ido Schimmel 
Signed-off-by: Vladimir Oltean 
Link: https://lore.kernel.org/r/20220302193939.1368823-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski