linux.git/net/ipv6/output_core.c, branch v4.3

netfilter: don't pull include/linux/netfilter.h from netns headers

2015-06-18T19:14:31+00:00

This pulls the full hook netfilter definitions from all those that include
net_namespace.h.

Instead let's just include the bare minimum required in the new
linux/netfilter_defs.h file, and use it from the netfilter netns header files.

I also needed to include in.h and in6.h from linux/netfilter.h otherwise we hit
this compilation error:

In file included from include/linux/netfilter_defs.h:4:0,
                 from include/net/netns/netfilter.h:4,
                 from include/net/net_namespace.h:22,
                 from include/linux/netdevice.h:43,
                 from net/netfilter/nfnetlink_queue_core.c:23:
include/uapi/linux/netfilter.h:76:17: error: field ‘in’ has incomplete type struct in_addr in;

And also explicit include linux/netfilter.h in several spots.

Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Eric W. Biederman

ipv6: ipv6_select_ident() returns a __be32

2015-05-26T00:27:11+00:00

ipv6_select_ident() returns a 32bit value in network order.

Fixes: 286c2349f666 ("ipv6: Clean up ipv6_select_ident() and ip6_fragment()")
Signed-off-by: Eric Dumazet 
Reported-by: kbuild test robot 
Acked-by: Martin KaFai Lau 
Signed-off-by: David S. Miller

ipv6: Remove external dependency on rt6i_dst and rt6i_src

2015-05-25T17:25:32+00:00

This patch removes the assumptions that the returned rt is always
a RTF_CACHE entry with the rt6i_dst and rt6i_src containing the
destination and source address.  The dst and src can be recovered from
the calling site.

We may consider to rename (rt6i_dst, rt6i_src) to
(rt6i_key_dst, rt6i_key_src) later.

Signed-off-by: Martin KaFai Lau 
Reviewed-by: Hannes Frederic Sowa 
Cc: Steffen Klassert 
Cc: Julian Anastasov 
Signed-off-by: David S. Miller

ipv6: Clean up ipv6_select_ident() and ip6_fragment()

2015-05-25T17:25:32+00:00

This patch changes the ipv6_select_ident() signature to return a
fragment id instead of taking a whole frag_hdr as a param to
only set the frag_hdr->identification.

It also cleans up ip6_fragment() to obtain the fragment id at the
beginning instead of using multiple "if" later to check fragment id
has been generated or not.

Signed-off-by: Martin KaFai Lau 
Cc: Hannes Frederic Sowa 
Cc: Steffen Klassert 
Cc: Julian Anastasov 
Signed-off-by: David S. Miller

udp_tunnel: Pass UDP socket down through udp_tunnel{, 6}_xmit_skb().

2015-04-07T19:29:08+00:00

That was we can make sure the output path of ipv4/ipv6 operate on
the UDP socket rather than whatever random thing happens to be in
skb->sk.

Based upon a patch by Jiri Pirko.

Signed-off-by: David S. Miller 
Acked-by: Hannes Frederic Sowa

netfilter: Pass socket pointer down through okfn().

2015-04-07T19:25:55+00:00

On the output paths in particular, we have to sometimes deal with two
socket contexts.  First, and usually skb->sk, is the local socket that
generated the frame.

And second, is potentially the socket used to control a tunneling
socket, such as one the encapsulates using UDP.

We do not want to disassociate skb->sk when encapsulating in order
to fix this, because that would break socket memory accounting.

The most extreme case where this can cause huge problems is an
AF_PACKET socket transmitting over a vxlan device.  We hit code
paths doing checks that assume they are dealing with an ipv4
socket, but are actually operating upon the AF_PACKET one.

Signed-off-by: David S. Miller

ipv6: hash net ptr into fragmentation bucket selection

2015-03-25T18:07:04+00:00

As namespaces are sometimes used with overlapping ip address ranges,
we should also use the namespace as input to the hash to select the ip
fragmentation counter bucket.

Cc: Eric Dumazet 
Cc: Flavio Leitner 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

ipv6: Make __ipv6_select_ident static

2015-02-09T22:21:03+00:00

Make __ipv6_select_ident() static as it isn't used outside
the file.

Fixes: 0508c07f5e0c9 (ipv6: Select fragment id during UFO segmentation if not set.)
Signed-off-by: Vladislav Yasevich 
Signed-off-by: David S. Miller

ipv6: Fix fragment id assignment on LE arches.

2015-02-09T22:21:03+00:00

Recent commit:
0508c07f5e0c94f38afd5434e8b2a55b84553077
Author: Vlad Yasevich 
Date:   Tue Feb 3 16:36:15 2015 -0500

    ipv6: Select fragment id during UFO segmentation if not set.

Introduced a bug on LE in how ipv6 fragment id is assigned.
This was cought by nightly sparce check:

Resolve the following sparce error:
 net/ipv6/output_core.c:57:38: sparse: incorrect type in assignment
 (different base types)
   net/ipv6/output_core.c:57:38:    expected restricted __be32
[usertype] ip6_frag_id
   net/ipv6/output_core.c:57:38:    got unsigned int [unsigned]
[assigned] [usertype] id

Fixes: 0508c07f5e0c9 (ipv6: Select fragment id during UFO segmentation if not set.)
Signed-off-by: Vladislav Yasevich 
Signed-off-by: David S. Miller

ipv6: Select fragment id during UFO segmentation if not set.

2015-02-04T07:06:43+00:00

If the IPv6 fragment id has not been set and we perform
fragmentation due to UFO, select a new fragment id.
We now consider a fragment id of 0 as unset and if id selection
process returns 0 (after all the pertrubations), we set it to
0x80000000, thus giving us ample space not to create collisions
with the next packet we may have to fragment.

When doing UFO integrity checking, we also select the
fragment id if it has not be set yet.   This is stored into
the skb_shinfo() thus allowing UFO to function correclty.

This patch also removes duplicate fragment id generation code
and moves ipv6_select_ident() into the header as it may be
used during GSO.

Signed-off-by: Vladislav Yasevich 
Signed-off-by: David S. Miller