linux.git/net/packet, branch v4.14.124

packet: Fix error path in packet_init

2019-05-16T17:42:34+00:00

[ Upstream commit 36096f2f4fa05f7678bc87397665491700bae757 ]

kernel BUG at lib/list_debug.c:47!
invalid opcode: 0000 [#1
CPU: 0 PID: 12914 Comm: rmmod Tainted: G        W         5.1.0+ #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__list_del_entry_valid+0x53/0x90
Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48
89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2
RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286
RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff
RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000
R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000
R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000
FS:  00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0
Call Trace:
 unregister_pernet_operations+0x34/0x120
 unregister_pernet_subsys+0x1c/0x30
 packet_exit+0x1c/0x369 [af_packet
 __x64_sys_delete_module+0x156/0x260
 ? lockdep_hardirqs_on+0x133/0x1b0
 ? do_syscall_64+0x12/0x1f0
 do_syscall_64+0x6e/0x1f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

When modprobe af_packet, register_pernet_subsys
fails and does a cleanup, ops->list is set to LIST_POISON1,
but the module init is considered to success, then while rmmod it,
BUG() is triggered in __list_del_entry_valid which is called from
unregister_pernet_subsys. This patch fix error handing path in
packet_init to avoid possilbe issue if some error occur.

Reported-by: Hulk Robot 
Signed-off-by: YueHaibing 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

packet: validate msg_namelen in send directly

2019-05-08T05:20:44+00:00

[ Upstream commit 486efdc8f6ce802b27e15921d2353cc740c55451 ]

Packet sockets in datagram mode take a destination address. Verify its
length before passing to dev_hard_header.

Prior to 2.6.14-rc3, the send code ignored sll_halen. This is
established behavior. Directly compare msg_namelen to dev->addr_len.

Change v1->v2: initialize addr in all paths

Fixes: 6b8d95f1795c4 ("packet: validate address length if non-zero")
Suggested-by: David Laight 
Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

packets: Always register packet sk in the same order

2019-04-03T04:25:09+00:00

[ Upstream commit a4dc6a49156b1f8d6e17251ffda17c9e6a5db78a ]

When using fanouts with AF_PACKET, the demux functions such as
fanout_demux_cpu will return an index in the fanout socket array, which
corresponds to the selected socket.

The ordering of this array depends on the order the sockets were added
to a given fanout group, so for FANOUT_CPU this means sockets are bound
to cpus in the order they are configured, which is OK.

However, when stopping then restarting the interface these sockets are
bound to, the sockets are reassigned to the fanout group in the reverse
order, due to the fact that they were inserted at the head of the
interface's AF_PACKET socket list.

This means that traffic that was directed to the first socket in the
fanout group is now directed to the last one after an interface restart.

In the case of FANOUT_CPU, traffic from CPU0 will be directed to the
socket that used to receive traffic from the last CPU after an interface
restart.

This commit introduces a helper to add a socket at the tail of a list,
then uses it to register AF_PACKET sockets.

Note that this changes the order in which sockets are listed in /proc and
with sock_diag.

Fixes: dc99f600698d ("packet: Add fanout support")
Signed-off-by: Maxime Chevallier 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/packet: Set __GFP_NOWARN upon allocation in alloc_pg_vec

2019-04-03T04:25:08+00:00

[ Upstream commit 398f0132c14754fcd03c1c4f8e7176d001ce8ea1 ]

Since commit fc62814d690c ("net/packet: fix 4gb buffer limit due to overflow check")
one can now allocate packet ring buffers >= UINT_MAX. However, syzkaller
found that that triggers a warning:

[   21.100000] WARNING: CPU: 2 PID: 2075 at mm/page_alloc.c:4584 __alloc_pages_nod0
[   21.101490] Modules linked in:
[   21.101921] CPU: 2 PID: 2075 Comm: syz-executor.0 Not tainted 5.0.0 #146
[   21.102784] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   21.103887] RIP: 0010:__alloc_pages_nodemask+0x2a0/0x630
[   21.104640] Code: fe ff ff 65 48 8b 04 25 c0 de 01 00 48 05 90 0f 00 00 41 bd 01 00 00 00 48 89 44 24 48 e9 9c fe 3
[   21.107121] RSP: 0018:ffff88805e1cf920 EFLAGS: 00010246
[   21.107819] RAX: 0000000000000000 RBX: ffffffff85a488a0 RCX: 0000000000000000
[   21.108753] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000000
[   21.109699] RBP: 1ffff1100bc39f28 R08: ffffed100bcefb67 R09: ffffed100bcefb67
[   21.110646] R10: 0000000000000001 R11: ffffed100bcefb66 R12: 000000000000000d
[   21.111623] R13: 0000000000000000 R14: ffff88805e77d888 R15: 000000000000000d
[   21.112552] FS:  00007f7c7de05700(0000) GS:ffff88806d100000(0000) knlGS:0000000000000000
[   21.113612] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   21.114405] CR2: 000000000065c000 CR3: 000000005e58e006 CR4: 00000000001606e0
[   21.115367] Call Trace:
[   21.115705]  ? __alloc_pages_slowpath+0x21c0/0x21c0
[   21.116362]  alloc_pages_current+0xac/0x1e0
[   21.116923]  kmalloc_order+0x18/0x70
[   21.117393]  kmalloc_order_trace+0x18/0x110
[   21.117949]  packet_set_ring+0x9d5/0x1770
[   21.118524]  ? packet_rcv_spkt+0x440/0x440
[   21.119094]  ? lock_downgrade+0x620/0x620
[   21.119646]  ? __might_fault+0x177/0x1b0
[   21.120177]  packet_setsockopt+0x981/0x2940
[   21.120753]  ? __fget+0x2fb/0x4b0
[   21.121209]  ? packet_release+0xab0/0xab0
[   21.121740]  ? sock_has_perm+0x1cd/0x260
[   21.122297]  ? selinux_secmark_relabel_packet+0xd0/0xd0
[   21.123013]  ? __fget+0x324/0x4b0
[   21.123451]  ? selinux_netlbl_socket_setsockopt+0x101/0x320
[   21.124186]  ? selinux_netlbl_sock_rcv_skb+0x3a0/0x3a0
[   21.124908]  ? __lock_acquire+0x529/0x3200
[   21.125453]  ? selinux_socket_setsockopt+0x5d/0x70
[   21.126075]  ? __sys_setsockopt+0x131/0x210
[   21.126533]  ? packet_release+0xab0/0xab0
[   21.127004]  __sys_setsockopt+0x131/0x210
[   21.127449]  ? kernel_accept+0x2f0/0x2f0
[   21.127911]  ? ret_from_fork+0x8/0x50
[   21.128313]  ? do_raw_spin_lock+0x11b/0x280
[   21.128800]  __x64_sys_setsockopt+0xba/0x150
[   21.129271]  ? lockdep_hardirqs_on+0x37f/0x560
[   21.129769]  do_syscall_64+0x9f/0x450
[   21.130182]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

We should allocate with __GFP_NOWARN to handle this.

Cc: Kal Conley 
Cc: Andrey Konovalov 
Fixes: fc62814d690c ("net/packet: fix 4gb buffer limit due to overflow check")
Signed-off-by: Christoph Paasch 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/packet: fix 4gb buffer limit due to overflow check

2019-02-27T09:08:06+00:00

[ Upstream commit fc62814d690cf62189854464f4bd07457d5e9e50 ]

When calculating rb->frames_per_block * req->tp_block_nr the result
can overflow. Check it for overflow without limiting the total buffer
size to UINT_MAX.

This change fixes support for packet ring buffers >= UINT_MAX.

Fixes: 8f8d28e4d6d8 ("net/packet: fix overflow in check for tp_frame_nr")
Signed-off-by: Kal Conley 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

packet: Do not leak dev refcounts on error exit

2019-01-23T07:09:47+00:00

[ Upstream commit d972f3dce8d161e2142da0ab1ef25df00e2f21a9 ]

'dev' is non NULL when the addr_len check triggers so it must goto a label
that does the dev_put otherwise dev will have a leaked refcount.

This bug causes the ib_ipoib module to become unloadable when using
systemd-network as it triggers this check on InfiniBand links.

Fixes: 99137b7888f4 ("packet: validate address length")
Reported-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

packet: validate address length if non-zero

2019-01-09T16:14:44+00:00

[ Upstream commit 6b8d95f1795c42161dc0984b6863e95d6acf24ed ]

Validate packet socket address length if a length is given. Zero
length is equivalent to not setting an address.

Fixes: 99137b7888f4 ("packet: validate address length")
Reported-by: Ido Schimmel 
Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

packet: validate address length

2019-01-09T16:14:44+00:00

[ Upstream commit 99137b7888f4058087895d035d81c6b2d31015c5 ]

Packet sockets with SOCK_DGRAM may pass an address for use in
dev_hard_header. Ensure that it is of sufficient length.

Reported-by: syzbot 
Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

packet: copy user buffers before orphan or clone

2018-12-05T18:41:17+00:00

[ Upstream commit 5cd8d46ea1562be80063f53c7c6a5f40224de623 ]

tpacket_snd sends packets with user pages linked into skb frags. It
notifies that pages can be reused when the skb is released by setting
skb->destructor to tpacket_destruct_skb.

This can cause data corruption if the skb is orphaned (e.g., on
transmit through veth) or cloned (e.g., on mirror to another psock).

Create a kernel-private copy of data in these cases, same as tun/tap
zerocopy transmission. Reuse that infrastructure: mark the skb as
SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx).

Unlike other zerocopy packets, do not set shinfo destructor_arg to
struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify
when the original skb is released and a timestamp is recorded. Do not
change this timestamp behavior. The ubuf_info->callback is not needed
anyway, as no zerocopy notification is expected.

Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The
resulting value is not a valid ubuf_info pointer, nor a valid
tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this.

The fix relies on features introduced in commit 52267790ef52 ("sock:
add MSG_ZEROCOPY"), so can be backported as is only to 4.14.

Tested with from `./in_netns.sh ./txring_overwrite` from
http://github.com/wdebruij/kerneltools/tests

Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap")
Reported-by: Anand H. Krishnan 
Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/packet: fix packet drop as of virtio gso

2018-10-18T07:16:19+00:00

[ Upstream commit 9d2f67e43b73e8af7438be219b66a5de0cfa8bd9 ]

When we use raw socket as the vhost backend, a packet from virito with
gso offloading information, cannot be sent out in later validaton at
xmit path, as we did not set correct skb->protocol which is further used
for looking up the gso function.

To fix this, we set this field according to virito hdr information.

Fixes: e858fae2b0b8f4 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion")
Signed-off-by: Jianfeng Tan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman