linux.git/net/rxrpc, branch v4.19.145

rxrpc: Fix race between recvmsg and sendmsg on immediate call failure

2020-08-11T13:32:35+00:00

[ Upstream commit 65550098c1c4db528400c73acf3e46bfa78d9264 ]

There's a race between rxrpc_sendmsg setting up a call, but then failing to
send anything on it due to an error, and recvmsg() seeing the call
completion occur and trying to return the state to the user.

An assertion fails in rxrpc_recvmsg() because the call has already been
released from the socket and is about to be released again as recvmsg deals
with it.  (The recvmsg_q queue on the socket holds a ref, so there's no
problem with use-after-free.)

We also have to be careful not to end up reporting an error twice, in such
a way that both returns indicate to userspace that the user ID supplied
with the call is no longer in use - which could cause the client to
malfunction if it recycles the user ID fast enough.

Fix this by the following means:

 (1) When sendmsg() creates a call after the point that the call has been
     successfully added to the socket, don't return any errors through
     sendmsg(), but rather complete the call and let recvmsg() retrieve
     them.  Make sendmsg() return 0 at this point.  Further calls to
     sendmsg() for that call will fail with ESHUTDOWN.

     Note that at this point, we haven't send any packets yet, so the
     server doesn't yet know about the call.

 (2) If sendmsg() returns an error when it was expected to create a new
     call, it means that the user ID wasn't used.

 (3) Mark the call disconnected before marking it completed to prevent an
     oops in rxrpc_release_call().

 (4) recvmsg() will then retrieve the error and set MSG_EOR to indicate
     that the user ID is no longer known by the kernel.

An oops like the following is produced:

	kernel BUG at net/rxrpc/recvmsg.c:605!
	...
	RIP: 0010:rxrpc_recvmsg+0x256/0x5ae
	...
	Call Trace:
	 ? __init_waitqueue_head+0x2f/0x2f
	 ____sys_recvmsg+0x8a/0x148
	 ? import_iovec+0x69/0x9c
	 ? copy_msghdr_from_user+0x5c/0x86
	 ___sys_recvmsg+0x72/0xaa
	 ? __fget_files+0x22/0x57
	 ? __fget_light+0x46/0x51
	 ? fdget+0x9/0x1b
	 do_recvmmsg+0x15e/0x232
	 ? _raw_spin_unlock+0xa/0xb
	 ? vtime_delta+0xf/0x25
	 __x64_sys_recvmmsg+0x2c/0x2f
	 do_syscall_64+0x4c/0x78
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 357f5ef64628 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()")
Reported-by: syzbot+b54969381df354936d96@syzkaller.appspotmail.com
Signed-off-by: David Howells 
Reviewed-by: Marc Dionne 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATA

2020-07-31T16:37:48+00:00

[ Upstream commit 639f181f0ee20d3249dbc55f740f0167267180f0 ]

rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if
rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read.

Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read
as this particular error doesn't get stored in ->sk_err by the networking
core.

Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive
errors (there's no way for it to report which call, if any, the error was
caused by).

Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix handling of rwind from an ACK packet

2020-07-01T03:17:11+00:00

[ Upstream commit a2ad7c21ad8cf1ce4ad65e13df1c2a1c29b38ac5 ]

The handling of the receive window size (rwind) from a received ACK packet
is not correct.  The rxrpc_input_ackinfo() function currently checks the
current Tx window size against the rwind from the ACK to see if it has
changed, but then limits the rwind size before storing it in the tx_winsize
member and, if it increased, wake up the transmitting process.  This means
that if rwind > RXRPC_RXTX_BUFF_SIZE - 1, this path will always be
followed.

Fix this by limiting rwind before we compare it to tx_winsize.

The effect of this can be seen by enabling the rxrpc_rx_rwind_change
tracepoint.

Fixes: 702f2ac87a9a ("rxrpc: Wake up the transmitter if Rx window size increases on the peer")
Signed-off-by: David Howells 
Signed-off-by: Sasha Levin

rxrpc: Fix notification call on completion of discarded calls

2020-07-01T03:17:04+00:00

[ Upstream commit 0041cd5a50442db6e456b145892a0eaf2dff061f ]

When preallocated service calls are being discarded, they're passed to
->discard_new_call() to have the caller clean up any attached higher-layer
preallocated pieces before being marked completed.  However, the act of
marking them completed now invokes the call's notification function - which
causes a problem because that function might assume that the previously
freed pieces of memory are still there.

Fix this by setting a dummy notification function on the socket after
calling ->discard_new_call().

This results in the following kasan message when the kafs module is
removed.

==================================================================
BUG: KASAN: use-after-free in afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707
Write of size 1 at addr ffff8880946c39e4 by task kworker/u4:1/21

CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.8.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x18f/0x20d lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707
 rxrpc_notify_socket+0x1db/0x5d0 net/rxrpc/recvmsg.c:40
 __rxrpc_set_call_completion.part.0+0x172/0x410 net/rxrpc/recvmsg.c:76
 __rxrpc_call_completed net/rxrpc/recvmsg.c:112 [inline]
 rxrpc_call_completed+0xca/0xf0 net/rxrpc/recvmsg.c:111
 rxrpc_discard_prealloc+0x781/0xab0 net/rxrpc/call_accept.c:233
 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245
 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110
 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155
 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186
 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603
 process_one_work+0x965/0x1690 kernel/workqueue.c:2269
 worker_thread+0x96/0xe10 kernel/workqueue.c:2415
 kthread+0x3b5/0x4a0 kernel/kthread.c:291
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293

Allocated by task 6820:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc mm/kasan/common.c:494 [inline]
 __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:467
 kmem_cache_alloc_trace+0x153/0x7d0 mm/slab.c:3551
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 afs_alloc_call+0x55/0x630 fs/afs/rxrpc.c:141
 afs_charge_preallocation+0xe9/0x2d0 fs/afs/rxrpc.c:757
 afs_open_socket+0x292/0x360 fs/afs/rxrpc.c:92
 afs_net_init+0xa6c/0xe30 fs/afs/main.c:125
 ops_init+0xaf/0x420 net/core/net_namespace.c:151
 setup_net+0x2de/0x860 net/core/net_namespace.c:341
 copy_net_ns+0x293/0x590 net/core/net_namespace.c:482
 create_new_namespaces+0x3fb/0xb30 kernel/nsproxy.c:110
 unshare_nsproxy_namespaces+0xbd/0x1f0 kernel/nsproxy.c:231
 ksys_unshare+0x43d/0x8e0 kernel/fork.c:2983
 __do_sys_unshare kernel/fork.c:3051 [inline]
 __se_sys_unshare kernel/fork.c:3049 [inline]
 __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3049
 do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:359
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 21:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 kasan_set_free_info mm/kasan/common.c:316 [inline]
 __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:455
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x109/0x2b0 mm/slab.c:3757
 afs_put_call+0x585/0xa40 fs/afs/rxrpc.c:190
 rxrpc_discard_prealloc+0x764/0xab0 net/rxrpc/call_accept.c:230
 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245
 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110
 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155
 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186
 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603
 process_one_work+0x965/0x1690 kernel/workqueue.c:2269
 worker_thread+0x96/0xe10 kernel/workqueue.c:2415
 kthread+0x3b5/0x4a0 kernel/kthread.c:291
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293

The buggy address belongs to the object at ffff8880946c3800
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 484 bytes inside of
 1024-byte region [ffff8880946c3800, ffff8880946c3c00)
The buggy address belongs to the page:
page:ffffea000251b0c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002546508 ffffea00024fa248 ffff8880aa000c40
raw: 0000000000000000 ffff8880946c3000 0000000100000002 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880946c3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880946c3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880946c3980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff8880946c3a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880946c3a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Reported-by: syzbot+d3eccef36ddbd02713e9@syzkaller.appspotmail.com
Fixes: 5ac0d62226a0 ("rxrpc: Fix missing notification")
Signed-off-by: David Howells 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

rxrpc: Adjust /proc/net/rxrpc/calls to display call->debug_id not user_ID

2020-06-25T13:33:01+00:00

[ Upstream commit 32f71aa497cfb23d37149c2ef16ad71fce2e45e2 ]

The user ID value isn't actually much use - and leaks a kernel pointer or a
userspace value - so replace it with the call debug ID, which appears in trace
points.

Signed-off-by: David Howells 
Signed-off-by: Sasha Levin

rxrpc: Fix ack discard

2020-05-27T15:37:46+00:00

[ Upstream commit 441fdee1eaf050ef0040bde0d7af075c1c6a6d8b ]

The Rx protocol has a "previousPacket" field in it that is not handled in
the same way by all protocol implementations.  Sometimes it contains the
serial number of the last DATA packet received, sometimes the sequence
number of the last DATA packet received and sometimes the highest sequence
number so far received.

AF_RXRPC is using this to weed out ACKs that are out of date (it's possible
for ACK packets to get reordered on the wire), but this does not work with
OpenAFS which will just stick the sequence number of the last packet seen
into previousPacket.

The issue being seen is that big AFS FS.StoreData RPC (eg. of ~256MiB) are
timing out when partly sent.  A trace was captured, with an additional
tracepoint to show ACKs being discarded in rxrpc_input_ack().  Here's an
excerpt showing the problem.

 52873.203230: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 0002449c q=00024499 fl=09

A DATA packet with sequence number 00024499 has been transmitted (the "q="
field).

 ...
 52873.243296: rxrpc_rx_ack: c=000004ae 00012a2b DLY r=00024499 f=00024497 p=00024496 n=0
 52873.243376: rxrpc_rx_ack: c=000004ae 00012a2c IDL r=0002449b f=00024499 p=00024498 n=0
 52873.243383: rxrpc_rx_ack: c=000004ae 00012a2d OOS r=0002449d f=00024499 p=0002449a n=2

The Out-Of-Sequence ACK indicates that the server didn't see DATA sequence
number 00024499, but did see seq 0002449a (previousPacket, shown as "p=",
skipped the number, but firstPacket, "f=", which shows the bottom of the
window is set at that point).

 52873.252663: rxrpc_retransmit: c=000004ae q=24499 a=02 xp=14581537
 52873.252664: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244bc q=00024499 fl=0b *RETRANS*

The packet has been retransmitted.  Retransmission recurs until the peer
says it got the packet.

 52873.271013: rxrpc_rx_ack: c=000004ae 00012a31 OOS r=000244a1 f=00024499 p=0002449e n=6

More OOS ACKs indicate that the other packets that are already in the
transmission pipeline are being received.  The specific-ACK list is up to 6
ACKs and NAKs.

 ...
 52873.284792: rxrpc_rx_ack: c=000004ae 00012a49 OOS r=000244b9 f=00024499 p=000244b6 n=30
 52873.284802: rxrpc_retransmit: c=000004ae q=24499 a=0a xp=63505500
 52873.284804: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244c2 q=00024499 fl=0b *RETRANS*
 52873.287468: rxrpc_rx_ack: c=000004ae 00012a4a OOS r=000244ba f=00024499 p=000244b7 n=31
 52873.287478: rxrpc_rx_ack: c=000004ae 00012a4b OOS r=000244bb f=00024499 p=000244b8 n=32

At this point, the server's receive window is full (n=32) with presumably 1
NAK'd packet and 31 ACK'd packets.  We can't transmit any more packets.

 52873.287488: rxrpc_retransmit: c=000004ae q=24499 a=0a xp=61327980
 52873.287489: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244c3 q=00024499 fl=0b *RETRANS*
 52873.293850: rxrpc_rx_ack: c=000004ae 00012a4c DLY r=000244bc f=000244a0 p=00024499 n=25

And now we've received an ACK indicating that a DATA retransmission was
received.  7 packets have been processed (the occupied part of the window
moved, as indicated by f= and n=).

 52873.293853: rxrpc_rx_discard_ack: c=000004ae r=00012a4c 000244a0<00024499 00024499<000244b8

However, the DLY ACK gets discarded because its previousPacket has gone
backwards (from p=000244b8, in the ACK at 52873.287478 to p=00024499 in the
ACK at 52873.293850).

We then end up in a continuous cycle of retransmit/discard.  kafs fails to
update its window because it's discarding the ACKs and can't transmit an
extra packet that would clear the issue because the window is full.
OpenAFS doesn't change the previousPacket value in the ACKs because no new
DATA packets are received with a different previousPacket number.

Fix this by altering the discard check to only discard an ACK based on
previousPacket if there was no advance in the firstPacket.  This allows us
to transmit a new packet which will cause previousPacket to advance in the
next ACK.

The check, however, needs to allow for the possibility that previousPacket
may actually have had the serial number placed in it instead - in which
case it will go outside the window and we should ignore it.

Fixes: 1a2391c30c0b ("rxrpc: Fix detection of out of order acks")
Reported-by: Dave Botsch 
Signed-off-by: David Howells 
Signed-off-by: Sasha Levin

rxrpc: Trace discarded ACKs

2020-05-27T15:37:46+00:00

[ Upstream commit d1f129470e6cb79b8b97fecd12689f6eb49e27fe ]

Add a tracepoint to track received ACKs that are discarded due to being
outside of the Tx window.

Signed-off-by: David Howells 
Signed-off-by: Sasha Levin

rxrpc: Fix a memory leak in rxkad_verify_response()

2020-05-27T15:37:44+00:00

commit f45d01f4f30b53c3a0a1c6c1c154acb7ff74ab9f upstream.

A ticket was not released after a call of the function
"rxkad_decrypt_ticket" failed. Thus replace the jump target
"temporary_error_free_resp" by "temporary_error_free_ticket".

Fixes: 8c2f826dc3631 ("rxrpc: Don't put crypto buffers on the stack")
Signed-off-by: Qiushi Wu 
Signed-off-by: David Howells 
cc: Markus Elfring 
Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix DATA Tx to disable nofrag for UDP on AF_INET6 socket

2020-05-02T15:25:51+00:00

commit 0e631eee17dcea576ab922fa70e4fdbd596ee452 upstream.

Fix the DATA packet transmission to disable nofrag for UDPv4 on an AF_INET6
socket as well as UDPv6 when trying to transmit fragmentably.

Without this, packets filled to the normal size used by the kernel AFS
client of 1412 bytes be rejected by udp_sendmsg() with EMSGSIZE
immediately.  The ->sk_error_report() notification hook is called, but
rxrpc doesn't generate a trace for it.

This is a temporary fix; a more permanent solution needs to involve
changing the size of the packets being filled in accordance with the MTU,
which isn't currently done in AF_RXRPC.  The reason for not doing so was
that, barring the last packet in an rx jumbo packet, jumbos can only be
assembled out of 1412-byte packets - and the plan was to construct jumbos
on the fly at transmission time.

Also, there's no point turning on IPV6_MTU_DISCOVER, since IPv6 has to
engage in this anyway since fragmentation is only done by the sender.  We
can then condense the switch-statement in rxrpc_send_data_packet().

Fixes: 75b54cb57ca3 ("rxrpc: Add IPv6 support")
Signed-off-by: David Howells 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

KEYS: Don't write out to userspace while holding key semaphore

2020-04-23T08:30:24+00:00

commit d3ec10aa95819bff18a0d936b18884c7816d0914 upstream.

A lockdep circular locking dependency report was seen when running a
keyutils test:

[12537.027242] ======================================================
[12537.059309] WARNING: possible circular locking dependency detected
[12537.088148] 4.18.0-147.7.1.el8_1.x86_64+debug #1 Tainted: G OE    --------- -  -
[12537.125253] ------------------------------------------------------
[12537.153189] keyctl/25598 is trying to acquire lock:
[12537.175087] 000000007c39f96c (&mm->mmap_sem){++++}, at: __might_fault+0xc4/0x1b0
[12537.208365]
[12537.208365] but task is already holding lock:
[12537.234507] 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220
[12537.270476]
[12537.270476] which lock already depends on the new lock.
[12537.270476]
[12537.307209]
[12537.307209] the existing dependency chain (in reverse order) is:
[12537.340754]
[12537.340754] -> #3 (&type->lock_class){++++}:
[12537.367434]        down_write+0x4d/0x110
[12537.385202]        __key_link_begin+0x87/0x280
[12537.405232]        request_key_and_link+0x483/0xf70
[12537.427221]        request_key+0x3c/0x80
[12537.444839]        dns_query+0x1db/0x5a5 [dns_resolver]
[12537.468445]        dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs]
[12537.496731]        cifs_reconnect+0xe04/0x2500 [cifs]
[12537.519418]        cifs_readv_from_socket+0x461/0x690 [cifs]
[12537.546263]        cifs_read_from_socket+0xa0/0xe0 [cifs]
[12537.573551]        cifs_demultiplex_thread+0x311/0x2db0 [cifs]
[12537.601045]        kthread+0x30c/0x3d0
[12537.617906]        ret_from_fork+0x3a/0x50
[12537.636225]
[12537.636225] -> #2 (root_key_user.cons_lock){+.+.}:
[12537.664525]        __mutex_lock+0x105/0x11f0
[12537.683734]        request_key_and_link+0x35a/0xf70
[12537.705640]        request_key+0x3c/0x80
[12537.723304]        dns_query+0x1db/0x5a5 [dns_resolver]
[12537.746773]        dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs]
[12537.775607]        cifs_reconnect+0xe04/0x2500 [cifs]
[12537.798322]        cifs_readv_from_socket+0x461/0x690 [cifs]
[12537.823369]        cifs_read_from_socket+0xa0/0xe0 [cifs]
[12537.847262]        cifs_demultiplex_thread+0x311/0x2db0 [cifs]
[12537.873477]        kthread+0x30c/0x3d0
[12537.890281]        ret_from_fork+0x3a/0x50
[12537.908649]
[12537.908649] -> #1 (&tcp_ses->srv_mutex){+.+.}:
[12537.935225]        __mutex_lock+0x105/0x11f0
[12537.954450]        cifs_call_async+0x102/0x7f0 [cifs]
[12537.977250]        smb2_async_readv+0x6c3/0xc90 [cifs]
[12538.000659]        cifs_readpages+0x120a/0x1e50 [cifs]
[12538.023920]        read_pages+0xf5/0x560
[12538.041583]        __do_page_cache_readahead+0x41d/0x4b0
[12538.067047]        ondemand_readahead+0x44c/0xc10
[12538.092069]        filemap_fault+0xec1/0x1830
[12538.111637]        __do_fault+0x82/0x260
[12538.129216]        do_fault+0x419/0xfb0
[12538.146390]        __handle_mm_fault+0x862/0xdf0
[12538.167408]        handle_mm_fault+0x154/0x550
[12538.187401]        __do_page_fault+0x42f/0xa60
[12538.207395]        do_page_fault+0x38/0x5e0
[12538.225777]        page_fault+0x1e/0x30
[12538.243010]
[12538.243010] -> #0 (&mm->mmap_sem){++++}:
[12538.267875]        lock_acquire+0x14c/0x420
[12538.286848]        __might_fault+0x119/0x1b0
[12538.306006]        keyring_read_iterator+0x7e/0x170
[12538.327936]        assoc_array_subtree_iterate+0x97/0x280
[12538.352154]        keyring_read+0xe9/0x110
[12538.370558]        keyctl_read_key+0x1b9/0x220
[12538.391470]        do_syscall_64+0xa5/0x4b0
[12538.410511]        entry_SYSCALL_64_after_hwframe+0x6a/0xdf
[12538.435535]
[12538.435535] other info that might help us debug this:
[12538.435535]
[12538.472829] Chain exists of:
[12538.472829]   &mm->mmap_sem --> root_key_user.cons_lock --> &type->lock_class
[12538.472829]
[12538.524820]  Possible unsafe locking scenario:
[12538.524820]
[12538.551431]        CPU0                    CPU1
[12538.572654]        ----                    ----
[12538.595865]   lock(&type->lock_class);
[12538.613737]                                lock(root_key_user.cons_lock);
[12538.644234]                                lock(&type->lock_class);
[12538.672410]   lock(&mm->mmap_sem);
[12538.687758]
[12538.687758]  *** DEADLOCK ***
[12538.687758]
[12538.714455] 1 lock held by keyctl/25598:
[12538.732097]  #0: 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220
[12538.770573]
[12538.770573] stack backtrace:
[12538.790136] CPU: 2 PID: 25598 Comm: keyctl Kdump: loaded Tainted: G
[12538.844855] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015
[12538.881963] Call Trace:
[12538.892897]  dump_stack+0x9a/0xf0
[12538.907908]  print_circular_bug.isra.25.cold.50+0x1bc/0x279
[12538.932891]  ? save_trace+0xd6/0x250
[12538.948979]  check_prev_add.constprop.32+0xc36/0x14f0
[12538.971643]  ? keyring_compare_object+0x104/0x190
[12538.992738]  ? check_usage+0x550/0x550
[12539.009845]  ? sched_clock+0x5/0x10
[12539.025484]  ? sched_clock_cpu+0x18/0x1e0
[12539.043555]  __lock_acquire+0x1f12/0x38d0
[12539.061551]  ? trace_hardirqs_on+0x10/0x10
[12539.080554]  lock_acquire+0x14c/0x420
[12539.100330]  ? __might_fault+0xc4/0x1b0
[12539.119079]  __might_fault+0x119/0x1b0
[12539.135869]  ? __might_fault+0xc4/0x1b0
[12539.153234]  keyring_read_iterator+0x7e/0x170
[12539.172787]  ? keyring_read+0x110/0x110
[12539.190059]  assoc_array_subtree_iterate+0x97/0x280
[12539.211526]  keyring_read+0xe9/0x110
[12539.227561]  ? keyring_gc_check_iterator+0xc0/0xc0
[12539.249076]  keyctl_read_key+0x1b9/0x220
[12539.266660]  do_syscall_64+0xa5/0x4b0
[12539.283091]  entry_SYSCALL_64_after_hwframe+0x6a/0xdf

One way to prevent this deadlock scenario from happening is to not
allow writing to userspace while holding the key semaphore. Instead,
an internal buffer is allocated for getting the keys out from the
read method first before copying them out to userspace without holding
the lock.

That requires taking out the __user modifier from all the relevant
read methods as well as additional changes to not use any userspace
write helpers. That is,

  1) The put_user() call is replaced by a direct copy.
  2) The copy_to_user() call is replaced by memcpy().
  3) All the fault handling code is removed.

Compiling on a x86-64 system, the size of the rxrpc_read() function is
reduced from 3795 bytes to 2384 bytes with this patch.

Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Jarkko Sakkinen 
Signed-off-by: Waiman Long 
Signed-off-by: David Howells 
Signed-off-by: Greg Kroah-Hartman