linux.git/net/tipc/core.c, branch v4.19.145

tipc: fix ordering of tipc module init and exit routine

2019-12-21T09:57:16+00:00

[ Upstream commit 9cf1cd8ee3ee09ef2859017df2058e2f53c5347f ]

In order to set/get/dump, the tipc uses the generic netlink
infrastructure. So, when tipc module is inserted, init function
calls genl_register_family().
After genl_register_family(), set/get/dump commands are immediately
allowed and these callbacks internally use the net_generic.
net_generic is allocated by register_pernet_device() but this
is called after genl_register_family() in the __init function.
So, these callbacks would use un-initialized net_generic.

Test commands:
    #SHELL1
    while :
    do
        modprobe tipc
        modprobe -rv tipc
    done

    #SHELL2
    while :
    do
        tipc link list
    done

Splat looks like:
[   59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled
[   59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access
[   59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194
[   59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc]
[   59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00
[   59.622550][ T2780] NET: Registered protocol family 30
[   59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202
[   59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907
[   59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149
[   59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1
[   59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40
[   59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328
[   59.624639][ T2788] FS:  00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
[   59.624645][ T2788] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   59.625875][ T2780] tipc: Started in single node mode
[   59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0
[   59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   59.636478][ T2788] Call Trace:
[   59.637025][ T2788]  tipc_nl_add_bc_link+0x179/0x1470 [tipc]
[   59.638219][ T2788]  ? lock_downgrade+0x6e0/0x6e0
[   59.638923][ T2788]  ? __tipc_nl_add_link+0xf90/0xf90 [tipc]
[   59.639533][ T2788]  ? tipc_nl_node_dump_link+0x318/0xa50 [tipc]
[   59.640160][ T2788]  ? mutex_lock_io_nested+0x1380/0x1380
[   59.640746][ T2788]  tipc_nl_node_dump_link+0x4fd/0xa50 [tipc]
[   59.641356][ T2788]  ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc]
[   59.642088][ T2788]  ? __skb_ext_del+0x270/0x270
[   59.642594][ T2788]  genl_lock_dumpit+0x85/0xb0
[   59.643050][ T2788]  netlink_dump+0x49c/0xed0
[   59.643529][ T2788]  ? __netlink_sendskb+0xc0/0xc0
[   59.644044][ T2788]  ? __netlink_dump_start+0x190/0x800
[   59.644617][ T2788]  ? __mutex_unlock_slowpath+0xd0/0x670
[   59.645177][ T2788]  __netlink_dump_start+0x5a0/0x800
[   59.645692][ T2788]  genl_rcv_msg+0xa75/0xe90
[   59.646144][ T2788]  ? __lock_acquire+0xdfe/0x3de0
[   59.646692][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[   59.647340][ T2788]  ? genl_lock_dumpit+0xb0/0xb0
[   59.647821][ T2788]  ? genl_unlock+0x20/0x20
[   59.648290][ T2788]  ? genl_parallel_done+0xe0/0xe0
[   59.648787][ T2788]  ? find_held_lock+0x39/0x1d0
[   59.649276][ T2788]  ? genl_rcv+0x15/0x40
[   59.649722][ T2788]  ? lock_contended+0xcd0/0xcd0
[   59.650296][ T2788]  netlink_rcv_skb+0x121/0x350
[   59.650828][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[   59.651491][ T2788]  ? netlink_ack+0x940/0x940
[   59.651953][ T2788]  ? lock_acquire+0x164/0x3b0
[   59.652449][ T2788]  genl_rcv+0x24/0x40
[   59.652841][ T2788]  netlink_unicast+0x421/0x600
[ ... ]

Fixes: 7e4369057806 ("tipc: fix a slab object leak")
Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace")
Signed-off-by: Taehee Yoo 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: change to use register_pernet_device

2019-07-03T11:14:47+00:00

[ Upstream commit c492d4c74dd3f87559883ffa0f94a8f1ae3fe5f5 ]

This patch is to fix a dst defcnt leak, which can be reproduced by doing:

  # ip net a c; ip net a s; modprobe tipc
  # ip net e s ip l a n eth1 type veth peer n eth1 netns c
  # ip net e c ip l s lo up; ip net e c ip l s eth1 up
  # ip net e s ip l s lo up; ip net e s ip l s eth1 up
  # ip net e c ip a a 1.1.1.2/8 dev eth1
  # ip net e s ip a a 1.1.1.1/8 dev eth1
  # ip net e c tipc b e m udp n u1 localip 1.1.1.2
  # ip net e s tipc b e m udp n u1 localip 1.1.1.1
  # ip net d c; ip net d s; rmmod tipc

and it will get stuck and keep logging the error:

  unregister_netdevice: waiting for lo to become free. Usage count = 1

The cause is that a dst is held by the udp sock's sk_rx_dst set on udp rx
path with udp_early_demux == 1, and this dst (eventually holding lo dev)
can't be released as bearer's removal in tipc pernet .exit happens after
lo dev's removal, default_device pernet .exit.

 "There are two distinct types of pernet_operations recognized: subsys and
  device.  At creation all subsys init functions are called before device
  init functions, and at destruction all device exit functions are called
  before subsys exit function."

So by calling register_pernet_device instead to register tipc_net_ops, the
pernet .exit() will be invoked earlier than loopback dev's removal when a
netns is being destroyed, as fou/gue does.

Note that vxlan and geneve udp tunnels don't have this issue, as the udp
sock is released in their device ndo_stop().

This fix is also necessary for tipc dst_cache, which will hold dsts on tx
path and I will introduce in my next patch.

Reported-by: Li Shuang 
Signed-off-by: Xin Long 
Acked-by: Jon Maloy 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: fix modprobe tipc failed after switch order of device registration

2019-06-04T06:02:34+00:00

commit 526f5b851a96566803ee4bee60d0a34df56c77f8 upstream.

Error message printed:
modprobe: ERROR: could not insert 'tipc': Address family not
supported by protocol.
when modprobe tipc after the following patch: switch order of
device registration, commit 7e27e8d6130c
("tipc: switch order of device registration to fix a crash")

Because sock_create_kern(net, AF_TIPC, ...) called by
tipc_topsrv_create_listener() in the initialization process
of tipc_init_net(), so tipc_socket_init() must be execute before that.
Meanwhile, tipc_net_id need to be initialized when sock_create()
called, and tipc_socket_init() is no need to be called for each namespace.

I add a variable tipc_topsrv_net_ops, and split the
register_pernet_subsys() of tipc into two parts, and split
tipc_socket_init() with initialization of pernet params.

By the way, I fixed resources rollback error when tipc_bcast_init()
failed in tipc_init_net().

Fixes: 7e27e8d6130c ("tipc: switch order of device registration to fix a crash")
Signed-off-by: Junwei Hu 
Reported-by: Wang Wang 
Reported-by: syzbot+1e8114b61079bfe9cbc5@syzkaller.appspotmail.com
Reviewed-by: Kang Zhou 
Reviewed-by: Suanming Mou 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Revert "tipc: fix modprobe tipc failed after switch order of device registration"

2019-06-04T06:02:34+00:00

commit 5593530e56943182ebb6d81eca8a3be6db6dbba4 upstream.

This reverts commit 532b0f7ece4cb2ffd24dc723ddf55242d1188e5e.

More revisions coming up.

Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: fix modprobe tipc failed after switch order of device registration

2019-05-25T16:23:22+00:00

[ Upstream commit 532b0f7ece4cb2ffd24dc723ddf55242d1188e5e ]

Error message printed:
modprobe: ERROR: could not insert 'tipc': Address family not
supported by protocol.
when modprobe tipc after the following patch: switch order of
device registration, commit 7e27e8d6130c
("tipc: switch order of device registration to fix a crash")

Because sock_create_kern(net, AF_TIPC, ...) is called by
tipc_topsrv_create_listener() in the initialization process
of tipc_net_ops, tipc_socket_init() must be execute before that.

I move tipc_socket_init() into function tipc_init_net().

Fixes: 7e27e8d6130c
("tipc: switch order of device registration to fix a crash")
Signed-off-by: Junwei Hu 
Reported-by: Wang Wang 
Reviewed-by: Kang Zhou 
Reviewed-by: Suanming Mou 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tipc: switch order of device registration to fix a crash

2019-05-25T16:23:21+00:00

[ Upstream commit 7e27e8d6130c5e88fac9ddec4249f7f2337fe7f8 ]

When tipc is loaded while many processes try to create a TIPC socket,
a crash occurs:
 PANIC: Unable to handle kernel paging request at virtual
 address "dfff20000000021d"
 pc : tipc_sk_create+0x374/0x1180 [tipc]
 lr : tipc_sk_create+0x374/0x1180 [tipc]
   Exception class = DABT (current EL), IL = 32 bits
 Call trace:
  tipc_sk_create+0x374/0x1180 [tipc]
  __sock_create+0x1cc/0x408
  __sys_socket+0xec/0x1f0
  __arm64_sys_socket+0x74/0xa8
 ...

This is due to race between sock_create and unfinished
register_pernet_device. tipc_sk_insert tries to do
"net_generic(net, tipc_net_id)".
but tipc_net_id is not initialized yet.

So switch the order of the two to close the race.

This can be reproduced with multiple processes doing socket(AF_TIPC, ...)
and one process doing module removal.

Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace")
Signed-off-by: Junwei Hu 
Reported-by: Wang Wang 
Reviewed-by: Xiaogang Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: Drop pernet_operations::async

2018-03-27T17:18:09+00:00

Synchronous pernet_operations are not allowed anymore.
All are asynchronous. So, drop the structure member.

Signed-off-by: Kirill Tkhai 
Signed-off-by: David S. Miller

tipc: handle collisions of 32-bit node address hash values

2018-03-23T17:12:18+00:00

When a 32-bit node address is generated from a 128-bit identifier,
there is a risk of collisions which must be discovered and handled.

We do this as follows:
- We don't apply the generated address immediately to the node, but do
  instead initiate a 1 sec trial period to allow other cluster members
  to discover and handle such collisions.

- During the trial period the node periodically sends out a new type
  of message, DSC_TRIAL_MSG, using broadcast or emulated broadcast,
  to all the other nodes in the cluster.

- When a node is receiving such a message, it must check that the
  presented 32-bit identifier either is unused, or was used by the very
  same peer in a previous session. In both cases it accepts the request
  by not responding to it.

- If it finds that the same node has been up before using a different
  address, it responds with a DSC_TRIAL_FAIL_MSG containing that
  address.

- If it finds that the address has already been taken by some other
  node, it generates a new, unused address and returns it to the
  requester.

- During the trial period the requesting node must always be prepared
  to accept a failure message, i.e., a message where a peer suggests a
  different (or equal)  address to the one tried. In those cases it
  must apply the suggested value as trial address and restart the trial
  period.

This algorithm ensures that in the vast majority of cases a node will
have the same address before and after a reboot. If a legacy user
configures the address explicitly, there will be no trial period and
messages, so this protocol addition is completely backwards compatible.

Acked-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

tipc: add 128-bit node identifier

2018-03-23T17:12:18+00:00

We add a 128-bit node identity, as an alternative to the currently used
32-bit node address.

For the sake of compatibility and to minimize message header changes
we retain the existing 32-bit address field. When not set explicitly by
the user, this field will be filled with a hash value generated from the
much longer node identity, and be used as a shorthand value for the
latter.

We permit either the address or the identity to be set by configuration,
but not both, so when the address value is set by a legacy user the
corresponding 128-bit node identity is generated based on the that value.

Acked-by: Ying Xue 
Signed-off-by: Jon Maloy 
Signed-off-by: David S. Miller

net: Convert tipc_net_ops

2018-03-13T15:24:56+00:00

TIPC looks concentrated in itself, and other pernet_operations
seem not touching its entities.

tipc_net_ops look pernet-divided, and they should be safe to
be executed in parallel for several net the same time.

Signed-off-by: Kirill Tkhai 
Signed-off-by: David S. Miller